mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-19 02:04:19 +08:00
fa31c1175f
The new ov5670 driver fails to build when VIDEO_V4L2_SUBDEV_API
or MEDIA_CONTROLLER are disabled:
drivers/media/i2c/ov5670.c: In function 'ov5670_open':
drivers/media/i2c/ov5670.c:1917:5: error: implicit declaration of function 'v4l2_subdev_get_try_format'; did you mean 'v4l2_subdev_notify_event'? [-Werror=implicit-function-declaration]
v4l2_subdev_get_try_format(sd, fh->pad, 0);
^~~~~~~~~~~~~~~~~~~~~~~~~~
v4l2_subdev_notify_event
drivers/media/i2c/ov5670.c:1917:38: error: 'struct v4l2_subdev_fh' has no member named 'pad'
v4l2_subdev_get_try_format(sd, fh->pad, 0);
^~
drivers/media/i2c/ov5670.c: In function 'ov5670_do_get_pad_format':
drivers/media/i2c/ov5670.c:2198:17: error: invalid type argument of unary '*' (have 'int')
fmt->format = *v4l2_subdev_get_try_format(&ov5670->sd, cfg,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
fmt->pad);
~~~~~~~~~
drivers/media/i2c/ov5670.c: At top level:
drivers/media/i2c/ov5670.c:2444:19: error: 'v4l2_subdev_link_validate' undeclared here (not in a function); did you mean 'v4l2_subdev_init'?
.link_validate = v4l2_subdev_link_validate,
^~~~~~~~~~~~~~~~~~~~~~~~~
v4l2_subdev_init
drivers/media/i2c/ov5670.c: In function 'ov5670_probe':
drivers/media/i2c/ov5670.c:2492:12: error: 'struct v4l2_subdev' has no member named 'entity'
This adds both to the Kconfig entry.
Fixes: 5de35c9b8d ("media: i2c: Add Omnivision OV5670 5M sensor support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
905 lines
26 KiB
Plaintext
905 lines
26 KiB
Plaintext
#
|
|
# Multimedia Video device configuration
|
|
#
|
|
|
|
if VIDEO_V4L2
|
|
|
|
config VIDEO_IR_I2C
|
|
tristate "I2C module for IR" if !MEDIA_SUBDRV_AUTOSELECT
|
|
depends on I2C && RC_CORE
|
|
default y
|
|
---help---
|
|
Most boards have an IR chip directly connected via GPIO. However,
|
|
some video boards have the IR connected via I2C bus.
|
|
|
|
If your board doesn't have an I2C IR chip, you may disable this
|
|
option.
|
|
|
|
In doubt, say Y.
|
|
|
|
#
|
|
# Encoder / Decoder module configuration
|
|
#
|
|
|
|
menu "I2C Encoders, decoders, sensors and other helper chips"
|
|
visible if !MEDIA_SUBDRV_AUTOSELECT || COMPILE_TEST
|
|
|
|
comment "Audio decoders, processors and mixers"
|
|
|
|
config VIDEO_TVAUDIO
|
|
tristate "Simple audio decoder chips"
|
|
depends on VIDEO_V4L2 && I2C
|
|
---help---
|
|
Support for several audio decoder chips found on some bt8xx boards:
|
|
Philips: tda9840, tda9873h, tda9874h/a, tda9850, tda985x, tea6300,
|
|
tea6320, tea6420, tda8425, ta8874z.
|
|
Microchip: pic16c54 based design on ProVideo PV951 board.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called tvaudio.
|
|
|
|
config VIDEO_TDA7432
|
|
tristate "Philips TDA7432 audio processor"
|
|
depends on VIDEO_V4L2 && I2C
|
|
---help---
|
|
Support for tda7432 audio decoder chip found on some bt8xx boards.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called tda7432.
|
|
|
|
config VIDEO_TDA9840
|
|
tristate "Philips TDA9840 audio processor"
|
|
depends on I2C
|
|
---help---
|
|
Support for tda9840 audio decoder chip found on some Zoran boards.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called tda9840.
|
|
|
|
config VIDEO_TEA6415C
|
|
tristate "Philips TEA6415C audio processor"
|
|
depends on I2C
|
|
---help---
|
|
Support for tea6415c audio decoder chip found on some bt8xx boards.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called tea6415c.
|
|
|
|
config VIDEO_TEA6420
|
|
tristate "Philips TEA6420 audio processor"
|
|
depends on I2C
|
|
---help---
|
|
Support for tea6420 audio decoder chip found on some bt8xx boards.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called tea6420.
|
|
|
|
config VIDEO_MSP3400
|
|
tristate "Micronas MSP34xx audio decoders"
|
|
depends on VIDEO_V4L2 && I2C
|
|
---help---
|
|
Support for the Micronas MSP34xx series of audio decoders.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called msp3400.
|
|
|
|
config VIDEO_CS3308
|
|
tristate "Cirrus Logic CS3308 audio ADC"
|
|
depends on VIDEO_V4L2 && I2C
|
|
---help---
|
|
Support for the Cirrus Logic CS3308 High Performance 8-Channel
|
|
Analog Volume Control
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called cs3308.
|
|
|
|
config VIDEO_CS5345
|
|
tristate "Cirrus Logic CS5345 audio ADC"
|
|
depends on VIDEO_V4L2 && I2C
|
|
---help---
|
|
Support for the Cirrus Logic CS5345 24-bit, 192 kHz
|
|
stereo A/D converter.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called cs5345.
|
|
|
|
config VIDEO_CS53L32A
|
|
tristate "Cirrus Logic CS53L32A audio ADC"
|
|
depends on VIDEO_V4L2 && I2C
|
|
---help---
|
|
Support for the Cirrus Logic CS53L32A low voltage
|
|
stereo A/D converter.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called cs53l32a.
|
|
|
|
config VIDEO_TLV320AIC23B
|
|
tristate "Texas Instruments TLV320AIC23B audio codec"
|
|
depends on VIDEO_V4L2 && I2C
|
|
---help---
|
|
Support for the Texas Instruments TLV320AIC23B audio codec.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called tlv320aic23b.
|
|
|
|
config VIDEO_UDA1342
|
|
tristate "Philips UDA1342 audio codec"
|
|
depends on VIDEO_V4L2 && I2C
|
|
---help---
|
|
Support for the Philips UDA1342 audio codec.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called uda1342.
|
|
|
|
config VIDEO_WM8775
|
|
tristate "Wolfson Microelectronics WM8775 audio ADC with input mixer"
|
|
depends on VIDEO_V4L2 && I2C
|
|
---help---
|
|
Support for the Wolfson Microelectronics WM8775 high
|
|
performance stereo A/D Converter with a 4 channel input mixer.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called wm8775.
|
|
|
|
config VIDEO_WM8739
|
|
tristate "Wolfson Microelectronics WM8739 stereo audio ADC"
|
|
depends on VIDEO_V4L2 && I2C
|
|
---help---
|
|
Support for the Wolfson Microelectronics WM8739
|
|
stereo A/D Converter.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called wm8739.
|
|
|
|
config VIDEO_VP27SMPX
|
|
tristate "Panasonic VP27's internal MPX"
|
|
depends on VIDEO_V4L2 && I2C
|
|
---help---
|
|
Support for the internal MPX of the Panasonic VP27s tuner.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called vp27smpx.
|
|
|
|
config VIDEO_SONY_BTF_MPX
|
|
tristate "Sony BTF's internal MPX"
|
|
depends on VIDEO_V4L2 && I2C
|
|
help
|
|
Support for the internal MPX of the Sony BTF-PG472Z tuner.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called sony-btf-mpx.
|
|
|
|
comment "RDS decoders"
|
|
|
|
config VIDEO_SAA6588
|
|
tristate "SAA6588 Radio Chip RDS decoder support"
|
|
depends on VIDEO_V4L2 && I2C
|
|
|
|
help
|
|
Support for this Radio Data System (RDS) decoder. This allows
|
|
seeing radio station identification transmitted using this
|
|
standard.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called saa6588.
|
|
|
|
comment "Video decoders"
|
|
|
|
config VIDEO_ADV7180
|
|
tristate "Analog Devices ADV7180 decoder"
|
|
depends on GPIOLIB && VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API
|
|
---help---
|
|
Support for the Analog Devices ADV7180 video decoder.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called adv7180.
|
|
|
|
config VIDEO_ADV7183
|
|
tristate "Analog Devices ADV7183 decoder"
|
|
depends on VIDEO_V4L2 && I2C
|
|
---help---
|
|
V4l2 subdevice driver for the Analog Devices
|
|
ADV7183 video decoder.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called adv7183.
|
|
|
|
config VIDEO_ADV748X
|
|
tristate "Analog Devices ADV748x decoder"
|
|
depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API
|
|
depends on OF
|
|
select REGMAP_I2C
|
|
---help---
|
|
V4L2 subdevice driver for the Analog Devices
|
|
ADV7481 and ADV7482 HDMI/Analog video decoders.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called adv748x.
|
|
|
|
config VIDEO_ADV7604
|
|
tristate "Analog Devices ADV7604 decoder"
|
|
depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API
|
|
depends on GPIOLIB || COMPILE_TEST
|
|
select HDMI
|
|
select V4L2_FWNODE
|
|
---help---
|
|
Support for the Analog Devices ADV7604 video decoder.
|
|
|
|
This is a Analog Devices Component/Graphics Digitizer
|
|
with 4:1 Multiplexed HDMI Receiver.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called adv7604.
|
|
|
|
config VIDEO_ADV7604_CEC
|
|
bool "Enable Analog Devices ADV7604 CEC support"
|
|
depends on VIDEO_ADV7604
|
|
select CEC_CORE
|
|
---help---
|
|
When selected the adv7604 will support the optional
|
|
HDMI CEC feature.
|
|
|
|
config VIDEO_ADV7842
|
|
tristate "Analog Devices ADV7842 decoder"
|
|
depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API
|
|
select HDMI
|
|
---help---
|
|
Support for the Analog Devices ADV7842 video decoder.
|
|
|
|
This is a Analog Devices Component/Graphics/SD Digitizer
|
|
with 2:1 Multiplexed HDMI Receiver.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called adv7842.
|
|
|
|
config VIDEO_ADV7842_CEC
|
|
bool "Enable Analog Devices ADV7842 CEC support"
|
|
depends on VIDEO_ADV7842
|
|
select CEC_CORE
|
|
---help---
|
|
When selected the adv7842 will support the optional
|
|
HDMI CEC feature.
|
|
|
|
config VIDEO_BT819
|
|
tristate "BT819A VideoStream decoder"
|
|
depends on VIDEO_V4L2 && I2C
|
|
---help---
|
|
Support for BT819A video decoder.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called bt819.
|
|
|
|
config VIDEO_BT856
|
|
tristate "BT856 VideoStream decoder"
|
|
depends on VIDEO_V4L2 && I2C
|
|
---help---
|
|
Support for BT856 video decoder.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called bt856.
|
|
|
|
config VIDEO_BT866
|
|
tristate "BT866 VideoStream decoder"
|
|
depends on VIDEO_V4L2 && I2C
|
|
---help---
|
|
Support for BT866 video decoder.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called bt866.
|
|
|
|
config VIDEO_KS0127
|
|
tristate "KS0127 video decoder"
|
|
depends on VIDEO_V4L2 && I2C
|
|
---help---
|
|
Support for KS0127 video decoder.
|
|
|
|
This chip is used on AverMedia AVS6EYES Zoran-based MJPEG
|
|
cards.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called ks0127.
|
|
|
|
config VIDEO_ML86V7667
|
|
tristate "OKI ML86V7667 video decoder"
|
|
depends on VIDEO_V4L2 && I2C
|
|
---help---
|
|
Support for the OKI Semiconductor ML86V7667 video decoder.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called ml86v7667.
|
|
|
|
config VIDEO_AD5820
|
|
tristate "AD5820 lens voice coil support"
|
|
depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER
|
|
---help---
|
|
This is a driver for the AD5820 camera lens voice coil.
|
|
It is used for example in Nokia N900 (RX-51).
|
|
|
|
config VIDEO_DW9714
|
|
tristate "DW9714 lens voice coil support"
|
|
depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER
|
|
depends on VIDEO_V4L2_SUBDEV_API
|
|
---help---
|
|
This is a driver for the DW9714 camera lens voice coil.
|
|
DW9714 is a 10 bit DAC with 120mA output current sink
|
|
capability. This is designed for linear control of
|
|
voice coil motors, controlled via I2C serial interface.
|
|
|
|
config VIDEO_SAA7110
|
|
tristate "Philips SAA7110 video decoder"
|
|
depends on VIDEO_V4L2 && I2C
|
|
---help---
|
|
Support for the Philips SAA7110 video decoders.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called saa7110.
|
|
|
|
config VIDEO_SAA711X
|
|
tristate "Philips SAA7111/3/4/5 video decoders"
|
|
depends on VIDEO_V4L2 && I2C
|
|
---help---
|
|
Support for the Philips SAA7111/3/4/5 video decoders.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called saa7115.
|
|
|
|
config VIDEO_TC358743
|
|
tristate "Toshiba TC358743 decoder"
|
|
depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API
|
|
select HDMI
|
|
select V4L2_FWNODE
|
|
---help---
|
|
Support for the Toshiba TC358743 HDMI to MIPI CSI-2 bridge.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called tc358743.
|
|
|
|
config VIDEO_TVP514X
|
|
tristate "Texas Instruments TVP514x video decoder"
|
|
depends on VIDEO_V4L2 && I2C
|
|
select V4L2_FWNODE
|
|
---help---
|
|
This is a Video4Linux2 sensor-level driver for the TI TVP5146/47
|
|
decoder. It is currently working with the TI OMAP3 camera
|
|
controller.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called tvp514x.
|
|
|
|
config VIDEO_TVP5150
|
|
tristate "Texas Instruments TVP5150 video decoder"
|
|
depends on VIDEO_V4L2 && I2C
|
|
select V4L2_FWNODE
|
|
---help---
|
|
Support for the Texas Instruments TVP5150 video decoder.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called tvp5150.
|
|
|
|
config VIDEO_TVP7002
|
|
tristate "Texas Instruments TVP7002 video decoder"
|
|
depends on VIDEO_V4L2 && I2C
|
|
select V4L2_FWNODE
|
|
---help---
|
|
Support for the Texas Instruments TVP7002 video decoder.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called tvp7002.
|
|
|
|
config VIDEO_TW2804
|
|
tristate "Techwell TW2804 multiple video decoder"
|
|
depends on VIDEO_V4L2 && I2C
|
|
---help---
|
|
Support for the Techwell tw2804 multiple video decoder.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called tw2804.
|
|
|
|
config VIDEO_TW9903
|
|
tristate "Techwell TW9903 video decoder"
|
|
depends on VIDEO_V4L2 && I2C
|
|
---help---
|
|
Support for the Techwell tw9903 multi-standard video decoder
|
|
with high quality down scaler.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called tw9903.
|
|
|
|
config VIDEO_TW9906
|
|
tristate "Techwell TW9906 video decoder"
|
|
depends on VIDEO_V4L2 && I2C
|
|
---help---
|
|
Support for the Techwell tw9906 enhanced multi-standard comb filter
|
|
video decoder with YCbCr input support.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called tw9906.
|
|
|
|
config VIDEO_VPX3220
|
|
tristate "vpx3220a, vpx3216b & vpx3214c video decoders"
|
|
depends on VIDEO_V4L2 && I2C
|
|
---help---
|
|
Support for VPX322x video decoders.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called vpx3220.
|
|
|
|
comment "Video and audio decoders"
|
|
|
|
config VIDEO_SAA717X
|
|
tristate "Philips SAA7171/3/4 audio/video decoders"
|
|
depends on VIDEO_V4L2 && I2C
|
|
---help---
|
|
Support for the Philips SAA7171/3/4 audio/video decoders.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called saa717x.
|
|
|
|
source "drivers/media/i2c/cx25840/Kconfig"
|
|
|
|
comment "Video encoders"
|
|
|
|
config VIDEO_SAA7127
|
|
tristate "Philips SAA7127/9 digital video encoders"
|
|
depends on VIDEO_V4L2 && I2C
|
|
---help---
|
|
Support for the Philips SAA7127/9 digital video encoders.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called saa7127.
|
|
|
|
config VIDEO_SAA7185
|
|
tristate "Philips SAA7185 video encoder"
|
|
depends on VIDEO_V4L2 && I2C
|
|
---help---
|
|
Support for the Philips SAA7185 video encoder.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called saa7185.
|
|
|
|
config VIDEO_ADV7170
|
|
tristate "Analog Devices ADV7170 video encoder"
|
|
depends on VIDEO_V4L2 && I2C
|
|
---help---
|
|
Support for the Analog Devices ADV7170 video encoder driver
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called adv7170.
|
|
|
|
config VIDEO_ADV7175
|
|
tristate "Analog Devices ADV7175 video encoder"
|
|
depends on VIDEO_V4L2 && I2C
|
|
---help---
|
|
Support for the Analog Devices ADV7175 video encoder driver
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called adv7175.
|
|
|
|
config VIDEO_ADV7343
|
|
tristate "ADV7343 video encoder"
|
|
depends on I2C
|
|
help
|
|
Support for Analog Devices I2C bus based ADV7343 encoder.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called adv7343.
|
|
|
|
config VIDEO_ADV7393
|
|
tristate "ADV7393 video encoder"
|
|
depends on I2C
|
|
help
|
|
Support for Analog Devices I2C bus based ADV7393 encoder.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called adv7393.
|
|
|
|
config VIDEO_ADV7511
|
|
tristate "Analog Devices ADV7511 encoder"
|
|
depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API
|
|
select HDMI
|
|
---help---
|
|
Support for the Analog Devices ADV7511 video encoder.
|
|
|
|
This is a Analog Devices HDMI transmitter.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called adv7511.
|
|
|
|
config VIDEO_ADV7511_CEC
|
|
bool "Enable Analog Devices ADV7511 CEC support"
|
|
depends on VIDEO_ADV7511
|
|
select CEC_CORE
|
|
---help---
|
|
When selected the adv7511 will support the optional
|
|
HDMI CEC feature.
|
|
|
|
config VIDEO_AD9389B
|
|
tristate "Analog Devices AD9389B encoder"
|
|
depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API
|
|
---help---
|
|
Support for the Analog Devices AD9389B video encoder.
|
|
|
|
This is a Analog Devices HDMI transmitter.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called ad9389b.
|
|
|
|
config VIDEO_AK881X
|
|
tristate "AK8813/AK8814 video encoders"
|
|
depends on I2C
|
|
help
|
|
Video output driver for AKM AK8813 and AK8814 TV encoders
|
|
|
|
config VIDEO_THS8200
|
|
tristate "Texas Instruments THS8200 video encoder"
|
|
depends on VIDEO_V4L2 && I2C
|
|
---help---
|
|
Support for the Texas Instruments THS8200 video encoder.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called ths8200.
|
|
|
|
comment "Camera sensor devices"
|
|
|
|
config VIDEO_APTINA_PLL
|
|
tristate
|
|
|
|
config VIDEO_SMIAPP_PLL
|
|
tristate
|
|
|
|
config VIDEO_OV2640
|
|
tristate "OmniVision OV2640 sensor support"
|
|
depends on VIDEO_V4L2 && I2C
|
|
depends on MEDIA_CAMERA_SUPPORT
|
|
help
|
|
This is a Video4Linux2 sensor-level driver for the OmniVision
|
|
OV2640 camera.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called ov2640.
|
|
|
|
config VIDEO_OV2659
|
|
tristate "OmniVision OV2659 sensor support"
|
|
depends on VIDEO_V4L2 && I2C
|
|
depends on MEDIA_CAMERA_SUPPORT
|
|
select V4L2_FWNODE
|
|
---help---
|
|
This is a Video4Linux2 sensor-level driver for the OmniVision
|
|
OV2659 camera.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called ov2659.
|
|
|
|
config VIDEO_OV5640
|
|
tristate "OmniVision OV5640 sensor support"
|
|
depends on OF
|
|
depends on GPIOLIB && VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API
|
|
depends on MEDIA_CAMERA_SUPPORT
|
|
select V4L2_FWNODE
|
|
---help---
|
|
This is a Video4Linux2 sensor-level driver for the Omnivision
|
|
OV5640 camera sensor with a MIPI CSI-2 interface.
|
|
|
|
config VIDEO_OV5645
|
|
tristate "OmniVision OV5645 sensor support"
|
|
depends on OF
|
|
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
|
|
depends on MEDIA_CAMERA_SUPPORT
|
|
select V4L2_FWNODE
|
|
---help---
|
|
This is a Video4Linux2 sensor-level driver for the OmniVision
|
|
OV5645 camera.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called ov5645.
|
|
|
|
config VIDEO_OV5647
|
|
tristate "OmniVision OV5647 sensor support"
|
|
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
|
|
depends on MEDIA_CAMERA_SUPPORT
|
|
select V4L2_FWNODE
|
|
---help---
|
|
This is a Video4Linux2 sensor-level driver for the OmniVision
|
|
OV5647 camera.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called ov5647.
|
|
|
|
config VIDEO_OV6650
|
|
tristate "OmniVision OV6650 sensor support"
|
|
depends on I2C && VIDEO_V4L2
|
|
depends on MEDIA_CAMERA_SUPPORT
|
|
---help---
|
|
This is a Video4Linux2 sensor-level driver for the OmniVision
|
|
OV6650 camera.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called ov6650.
|
|
|
|
config VIDEO_OV5670
|
|
tristate "OmniVision OV5670 sensor support"
|
|
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
|
|
depends on MEDIA_CAMERA_SUPPORT
|
|
depends on MEDIA_CONTROLLER
|
|
select V4L2_FWNODE
|
|
---help---
|
|
This is a Video4Linux2 sensor-level driver for the OmniVision
|
|
OV5670 camera.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called ov5670.
|
|
|
|
config VIDEO_OV7640
|
|
tristate "OmniVision OV7640 sensor support"
|
|
depends on I2C && VIDEO_V4L2
|
|
depends on MEDIA_CAMERA_SUPPORT
|
|
---help---
|
|
This is a Video4Linux2 sensor-level driver for the OmniVision
|
|
OV7640 camera.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called ov7640.
|
|
|
|
config VIDEO_OV7670
|
|
tristate "OmniVision OV7670 sensor support"
|
|
depends on I2C && VIDEO_V4L2
|
|
depends on MEDIA_CAMERA_SUPPORT
|
|
---help---
|
|
This is a Video4Linux2 sensor-level driver for the OmniVision
|
|
OV7670 VGA camera. It currently only works with the M88ALP01
|
|
controller.
|
|
|
|
config VIDEO_OV9650
|
|
tristate "OmniVision OV9650/OV9652 sensor support"
|
|
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
|
|
---help---
|
|
This is a V4L2 sensor-level driver for the Omnivision
|
|
OV9650 and OV9652 camera sensors.
|
|
|
|
config VIDEO_OV13858
|
|
tristate "OmniVision OV13858 sensor support"
|
|
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
|
|
depends on MEDIA_CAMERA_SUPPORT
|
|
---help---
|
|
This is a Video4Linux2 sensor-level driver for the OmniVision
|
|
OV13858 camera.
|
|
|
|
config VIDEO_VS6624
|
|
tristate "ST VS6624 sensor support"
|
|
depends on VIDEO_V4L2 && I2C
|
|
depends on MEDIA_CAMERA_SUPPORT
|
|
---help---
|
|
This is a Video4Linux2 sensor-level driver for the ST VS6624
|
|
camera.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called vs6624.
|
|
|
|
config VIDEO_MT9M032
|
|
tristate "MT9M032 camera sensor support"
|
|
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
|
|
depends on MEDIA_CAMERA_SUPPORT
|
|
select VIDEO_APTINA_PLL
|
|
---help---
|
|
This driver supports MT9M032 camera sensors from Aptina, monochrome
|
|
models only.
|
|
|
|
config VIDEO_MT9M111
|
|
tristate "mt9m111, mt9m112 and mt9m131 support"
|
|
depends on I2C && VIDEO_V4L2
|
|
help
|
|
This driver supports MT9M111, MT9M112 and MT9M131 cameras from
|
|
Micron/Aptina
|
|
|
|
config VIDEO_MT9P031
|
|
tristate "Aptina MT9P031 support"
|
|
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
|
|
depends on MEDIA_CAMERA_SUPPORT
|
|
select VIDEO_APTINA_PLL
|
|
---help---
|
|
This is a Video4Linux2 sensor-level driver for the Aptina
|
|
(Micron) mt9p031 5 Mpixel camera.
|
|
|
|
config VIDEO_MT9T001
|
|
tristate "Aptina MT9T001 support"
|
|
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
|
|
depends on MEDIA_CAMERA_SUPPORT
|
|
---help---
|
|
This is a Video4Linux2 sensor-level driver for the Aptina
|
|
(Micron) mt0t001 3 Mpixel camera.
|
|
|
|
config VIDEO_MT9V011
|
|
tristate "Micron mt9v011 sensor support"
|
|
depends on I2C && VIDEO_V4L2
|
|
depends on MEDIA_CAMERA_SUPPORT
|
|
---help---
|
|
This is a Video4Linux2 sensor-level driver for the Micron
|
|
mt0v011 1.3 Mpixel camera. It currently only works with the
|
|
em28xx driver.
|
|
|
|
config VIDEO_MT9V032
|
|
tristate "Micron MT9V032 sensor support"
|
|
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
|
|
depends on MEDIA_CAMERA_SUPPORT
|
|
select REGMAP_I2C
|
|
select V4L2_FWNODE
|
|
---help---
|
|
This is a Video4Linux2 sensor-level driver for the Micron
|
|
MT9V032 752x480 CMOS sensor.
|
|
|
|
config VIDEO_SR030PC30
|
|
tristate "Siliconfile SR030PC30 sensor support"
|
|
depends on I2C && VIDEO_V4L2
|
|
depends on MEDIA_CAMERA_SUPPORT
|
|
---help---
|
|
This driver supports SR030PC30 VGA camera from Siliconfile
|
|
|
|
config VIDEO_NOON010PC30
|
|
tristate "Siliconfile NOON010PC30 sensor support"
|
|
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
|
|
depends on MEDIA_CAMERA_SUPPORT
|
|
---help---
|
|
This driver supports NOON010PC30 CIF camera from Siliconfile
|
|
|
|
source "drivers/media/i2c/m5mols/Kconfig"
|
|
|
|
config VIDEO_S5K6AA
|
|
tristate "Samsung S5K6AAFX sensor support"
|
|
depends on MEDIA_CAMERA_SUPPORT
|
|
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
|
|
---help---
|
|
This is a V4L2 sensor-level driver for Samsung S5K6AA(FX) 1.3M
|
|
camera sensor with an embedded SoC image signal processor.
|
|
|
|
config VIDEO_S5K6A3
|
|
tristate "Samsung S5K6A3 sensor support"
|
|
depends on MEDIA_CAMERA_SUPPORT
|
|
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
|
|
---help---
|
|
This is a V4L2 sensor-level driver for Samsung S5K6A3 raw
|
|
camera sensor.
|
|
|
|
config VIDEO_S5K4ECGX
|
|
tristate "Samsung S5K4ECGX sensor support"
|
|
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
|
|
select CRC32
|
|
---help---
|
|
This is a V4L2 sensor-level driver for Samsung S5K4ECGX 5M
|
|
camera sensor with an embedded SoC image signal processor.
|
|
|
|
config VIDEO_S5K5BAF
|
|
tristate "Samsung S5K5BAF sensor support"
|
|
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
|
|
select V4L2_FWNODE
|
|
---help---
|
|
This is a V4L2 sensor-level driver for Samsung S5K5BAF 2M
|
|
camera sensor with an embedded SoC image signal processor.
|
|
|
|
source "drivers/media/i2c/smiapp/Kconfig"
|
|
source "drivers/media/i2c/et8ek8/Kconfig"
|
|
|
|
config VIDEO_S5C73M3
|
|
tristate "Samsung S5C73M3 sensor support"
|
|
depends on I2C && SPI && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
|
|
select V4L2_FWNODE
|
|
---help---
|
|
This is a V4L2 sensor-level driver for Samsung S5C73M3
|
|
8 Mpixel camera.
|
|
|
|
comment "Flash devices"
|
|
|
|
config VIDEO_ADP1653
|
|
tristate "ADP1653 flash support"
|
|
depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER
|
|
depends on MEDIA_CAMERA_SUPPORT
|
|
---help---
|
|
This is a driver for the ADP1653 flash controller. It is used for
|
|
example in Nokia N900.
|
|
|
|
config VIDEO_AS3645A
|
|
tristate "AS3645A flash driver support"
|
|
depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER
|
|
depends on MEDIA_CAMERA_SUPPORT
|
|
---help---
|
|
This is a driver for the AS3645A and LM3555 flash controllers. It has
|
|
build in control for flash, torch and indicator LEDs.
|
|
|
|
config VIDEO_LM3560
|
|
tristate "LM3560 dual flash driver support"
|
|
depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER
|
|
depends on MEDIA_CAMERA_SUPPORT
|
|
select REGMAP_I2C
|
|
---help---
|
|
This is a driver for the lm3560 dual flash controllers. It controls
|
|
flash, torch LEDs.
|
|
|
|
config VIDEO_LM3646
|
|
tristate "LM3646 dual flash driver support"
|
|
depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER
|
|
depends on MEDIA_CAMERA_SUPPORT
|
|
select REGMAP_I2C
|
|
---help---
|
|
This is a driver for the lm3646 dual flash controllers. It controls
|
|
flash, torch LEDs.
|
|
|
|
comment "Video improvement chips"
|
|
|
|
config VIDEO_UPD64031A
|
|
tristate "NEC Electronics uPD64031A Ghost Reduction"
|
|
depends on VIDEO_V4L2 && I2C
|
|
---help---
|
|
Support for the NEC Electronics uPD64031A Ghost Reduction
|
|
video chip. It is most often found in NTSC TV cards made for
|
|
Japan and is used to reduce the 'ghosting' effect that can
|
|
be present in analog TV broadcasts.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called upd64031a.
|
|
|
|
config VIDEO_UPD64083
|
|
tristate "NEC Electronics uPD64083 3-Dimensional Y/C separation"
|
|
depends on VIDEO_V4L2 && I2C
|
|
---help---
|
|
Support for the NEC Electronics uPD64083 3-Dimensional Y/C
|
|
separation video chip. It is used to improve the quality of
|
|
the colors of a composite signal.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called upd64083.
|
|
|
|
comment "Audio/Video compression chips"
|
|
|
|
config VIDEO_SAA6752HS
|
|
tristate "Philips SAA6752HS MPEG-2 Audio/Video Encoder"
|
|
depends on VIDEO_V4L2 && I2C
|
|
select CRC32
|
|
---help---
|
|
Support for the Philips SAA6752HS MPEG-2 video and MPEG-audio/AC-3
|
|
audio encoder with multiplexer.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called saa6752hs.
|
|
|
|
comment "SDR tuner chips"
|
|
|
|
config SDR_MAX2175
|
|
tristate "Maxim 2175 RF to Bits tuner"
|
|
depends on VIDEO_V4L2 && MEDIA_SDR_SUPPORT && I2C
|
|
---help---
|
|
Support for Maxim 2175 tuner. It is an advanced analog/digital
|
|
radio receiver with RF-to-Bits front-end designed for SDR solutions.
|
|
|
|
To compile this driver as a module, choose M here; the
|
|
module will be called max2175.
|
|
|
|
comment "Miscellaneous helper chips"
|
|
|
|
config VIDEO_THS7303
|
|
tristate "THS7303/53 Video Amplifier"
|
|
depends on VIDEO_V4L2 && I2C
|
|
help
|
|
Support for TI THS7303/53 video amplifier
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called ths7303.
|
|
|
|
config VIDEO_M52790
|
|
tristate "Mitsubishi M52790 A/V switch"
|
|
depends on VIDEO_V4L2 && I2C
|
|
---help---
|
|
Support for the Mitsubishi M52790 A/V switch.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called m52790.
|
|
endmenu
|
|
|
|
menu "Sensors used on soc_camera driver"
|
|
|
|
if SOC_CAMERA
|
|
source "drivers/media/i2c/soc_camera/Kconfig"
|
|
endif
|
|
|
|
endmenu
|
|
|
|
endif
|