mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-05 18:14:07 +08:00
5d32c88f0b
Merge batch of fixes from Andrew Morton: "The simple_open() cleanup was held back while I wanted for laggards to merge things. I still need to send a few checkpoint/restore patches. I've been wobbly about merging them because I'm wobbly about the overall prospects for success of the project. But after speaking with Pavel at the LSF conference, it sounds like they're further toward completion than I feared - apparently davem is at the "has stopped complaining" stage regarding the net changes. So I need to go back and re-review those patchs and their (lengthy) discussion." * emailed from Andrew Morton <akpm@linux-foundation.org>: (16 patches) memcg swap: use mem_cgroup_uncharge_swap fix backlight: add driver for DA9052/53 PMIC v1 C6X: use set_current_blocked() and block_sigmask() MAINTAINERS: add entry for sparse checker MAINTAINERS: fix REMOTEPROC F: typo alpha: use set_current_blocked() and block_sigmask() simple_open: automatically convert to simple_open() scripts/coccinelle/api/simple_open.cocci: semantic patch for simple_open() libfs: add simple_open() hugetlbfs: remove unregister_filesystem() when initializing module drivers/rtc/rtc-88pm860x.c: fix rtc irq enable callback fs/xattr.c:setxattr(): improve handling of allocation failures fs/xattr.c:listxattr(): fall back to vmalloc() if kmalloc() failed fs/xattr.c: suppress page allocation failure warnings from sys_listxattr() sysrq: use SEND_SIG_FORCED instead of force_sig() proc: fix mount -t proc -o AAA
445 lines
12 KiB
C
445 lines
12 KiB
C
/*
|
|
* Real Time Clock driver for Marvell 88PM860x PMIC
|
|
*
|
|
* Copyright (c) 2010 Marvell International Ltd.
|
|
* Author: Haojian Zhuang <haojian.zhuang@marvell.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/rtc.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/mfd/core.h>
|
|
#include <linux/mfd/88pm860x.h>
|
|
|
|
#define VRTC_CALIBRATION
|
|
|
|
struct pm860x_rtc_info {
|
|
struct pm860x_chip *chip;
|
|
struct i2c_client *i2c;
|
|
struct rtc_device *rtc_dev;
|
|
struct device *dev;
|
|
struct delayed_work calib_work;
|
|
|
|
int irq;
|
|
int vrtc;
|
|
int (*sync)(unsigned int ticks);
|
|
};
|
|
|
|
#define REG_VRTC_MEAS1 0x7D
|
|
|
|
#define REG0_ADDR 0xB0
|
|
#define REG1_ADDR 0xB2
|
|
#define REG2_ADDR 0xB4
|
|
#define REG3_ADDR 0xB6
|
|
|
|
#define REG0_DATA 0xB1
|
|
#define REG1_DATA 0xB3
|
|
#define REG2_DATA 0xB5
|
|
#define REG3_DATA 0xB7
|
|
|
|
/* bit definitions of Measurement Enable Register 2 (0x51) */
|
|
#define MEAS2_VRTC (1 << 0)
|
|
|
|
/* bit definitions of RTC Register 1 (0xA0) */
|
|
#define ALARM_EN (1 << 3)
|
|
#define ALARM_WAKEUP (1 << 4)
|
|
#define ALARM (1 << 5)
|
|
#define RTC1_USE_XO (1 << 7)
|
|
|
|
#define VRTC_CALIB_INTERVAL (HZ * 60 * 10) /* 10 minutes */
|
|
|
|
static irqreturn_t rtc_update_handler(int irq, void *data)
|
|
{
|
|
struct pm860x_rtc_info *info = (struct pm860x_rtc_info *)data;
|
|
int mask;
|
|
|
|
mask = ALARM | ALARM_WAKEUP;
|
|
pm860x_set_bits(info->i2c, PM8607_RTC1, mask | ALARM_EN, mask);
|
|
rtc_update_irq(info->rtc_dev, 1, RTC_AF);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int pm860x_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled)
|
|
{
|
|
struct pm860x_rtc_info *info = dev_get_drvdata(dev);
|
|
|
|
if (enabled)
|
|
pm860x_set_bits(info->i2c, PM8607_RTC1, ALARM_EN, ALARM_EN);
|
|
else
|
|
pm860x_set_bits(info->i2c, PM8607_RTC1, ALARM_EN, 0);
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Calculate the next alarm time given the requested alarm time mask
|
|
* and the current time.
|
|
*/
|
|
static void rtc_next_alarm_time(struct rtc_time *next, struct rtc_time *now,
|
|
struct rtc_time *alrm)
|
|
{
|
|
unsigned long next_time;
|
|
unsigned long now_time;
|
|
|
|
next->tm_year = now->tm_year;
|
|
next->tm_mon = now->tm_mon;
|
|
next->tm_mday = now->tm_mday;
|
|
next->tm_hour = alrm->tm_hour;
|
|
next->tm_min = alrm->tm_min;
|
|
next->tm_sec = alrm->tm_sec;
|
|
|
|
rtc_tm_to_time(now, &now_time);
|
|
rtc_tm_to_time(next, &next_time);
|
|
|
|
if (next_time < now_time) {
|
|
/* Advance one day */
|
|
next_time += 60 * 60 * 24;
|
|
rtc_time_to_tm(next_time, next);
|
|
}
|
|
}
|
|
|
|
static int pm860x_rtc_read_time(struct device *dev, struct rtc_time *tm)
|
|
{
|
|
struct pm860x_rtc_info *info = dev_get_drvdata(dev);
|
|
unsigned char buf[8];
|
|
unsigned long ticks, base, data;
|
|
|
|
pm860x_page_bulk_read(info->i2c, REG0_ADDR, 8, buf);
|
|
dev_dbg(info->dev, "%x-%x-%x-%x-%x-%x-%x-%x\n", buf[0], buf[1],
|
|
buf[2], buf[3], buf[4], buf[5], buf[6], buf[7]);
|
|
base = (buf[1] << 24) | (buf[3] << 16) | (buf[5] << 8) | buf[7];
|
|
|
|
/* load 32-bit read-only counter */
|
|
pm860x_bulk_read(info->i2c, PM8607_RTC_COUNTER1, 4, buf);
|
|
data = (buf[3] << 24) | (buf[2] << 16) | (buf[1] << 8) | buf[0];
|
|
ticks = base + data;
|
|
dev_dbg(info->dev, "get base:0x%lx, RO count:0x%lx, ticks:0x%lx\n",
|
|
base, data, ticks);
|
|
|
|
rtc_time_to_tm(ticks, tm);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pm860x_rtc_set_time(struct device *dev, struct rtc_time *tm)
|
|
{
|
|
struct pm860x_rtc_info *info = dev_get_drvdata(dev);
|
|
unsigned char buf[4];
|
|
unsigned long ticks, base, data;
|
|
|
|
if ((tm->tm_year < 70) || (tm->tm_year > 138)) {
|
|
dev_dbg(info->dev, "Set time %d out of range. "
|
|
"Please set time between 1970 to 2038.\n",
|
|
1900 + tm->tm_year);
|
|
return -EINVAL;
|
|
}
|
|
rtc_tm_to_time(tm, &ticks);
|
|
|
|
/* load 32-bit read-only counter */
|
|
pm860x_bulk_read(info->i2c, PM8607_RTC_COUNTER1, 4, buf);
|
|
data = (buf[3] << 24) | (buf[2] << 16) | (buf[1] << 8) | buf[0];
|
|
base = ticks - data;
|
|
dev_dbg(info->dev, "set base:0x%lx, RO count:0x%lx, ticks:0x%lx\n",
|
|
base, data, ticks);
|
|
|
|
pm860x_page_reg_write(info->i2c, REG0_DATA, (base >> 24) & 0xFF);
|
|
pm860x_page_reg_write(info->i2c, REG1_DATA, (base >> 16) & 0xFF);
|
|
pm860x_page_reg_write(info->i2c, REG2_DATA, (base >> 8) & 0xFF);
|
|
pm860x_page_reg_write(info->i2c, REG3_DATA, base & 0xFF);
|
|
|
|
if (info->sync)
|
|
info->sync(ticks);
|
|
return 0;
|
|
}
|
|
|
|
static int pm860x_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
|
|
{
|
|
struct pm860x_rtc_info *info = dev_get_drvdata(dev);
|
|
unsigned char buf[8];
|
|
unsigned long ticks, base, data;
|
|
int ret;
|
|
|
|
pm860x_page_bulk_read(info->i2c, REG0_ADDR, 8, buf);
|
|
dev_dbg(info->dev, "%x-%x-%x-%x-%x-%x-%x-%x\n", buf[0], buf[1],
|
|
buf[2], buf[3], buf[4], buf[5], buf[6], buf[7]);
|
|
base = (buf[1] << 24) | (buf[3] << 16) | (buf[5] << 8) | buf[7];
|
|
|
|
pm860x_bulk_read(info->i2c, PM8607_RTC_EXPIRE1, 4, buf);
|
|
data = (buf[3] << 24) | (buf[2] << 16) | (buf[1] << 8) | buf[0];
|
|
ticks = base + data;
|
|
dev_dbg(info->dev, "get base:0x%lx, RO count:0x%lx, ticks:0x%lx\n",
|
|
base, data, ticks);
|
|
|
|
rtc_time_to_tm(ticks, &alrm->time);
|
|
ret = pm860x_reg_read(info->i2c, PM8607_RTC1);
|
|
alrm->enabled = (ret & ALARM_EN) ? 1 : 0;
|
|
alrm->pending = (ret & (ALARM | ALARM_WAKEUP)) ? 1 : 0;
|
|
return 0;
|
|
}
|
|
|
|
static int pm860x_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
|
|
{
|
|
struct pm860x_rtc_info *info = dev_get_drvdata(dev);
|
|
struct rtc_time now_tm, alarm_tm;
|
|
unsigned long ticks, base, data;
|
|
unsigned char buf[8];
|
|
int mask;
|
|
|
|
pm860x_set_bits(info->i2c, PM8607_RTC1, ALARM_EN, 0);
|
|
|
|
pm860x_page_bulk_read(info->i2c, REG0_ADDR, 8, buf);
|
|
dev_dbg(info->dev, "%x-%x-%x-%x-%x-%x-%x-%x\n", buf[0], buf[1],
|
|
buf[2], buf[3], buf[4], buf[5], buf[6], buf[7]);
|
|
base = (buf[1] << 24) | (buf[3] << 16) | (buf[5] << 8) | buf[7];
|
|
|
|
/* load 32-bit read-only counter */
|
|
pm860x_bulk_read(info->i2c, PM8607_RTC_COUNTER1, 4, buf);
|
|
data = (buf[3] << 24) | (buf[2] << 16) | (buf[1] << 8) | buf[0];
|
|
ticks = base + data;
|
|
dev_dbg(info->dev, "get base:0x%lx, RO count:0x%lx, ticks:0x%lx\n",
|
|
base, data, ticks);
|
|
|
|
rtc_time_to_tm(ticks, &now_tm);
|
|
rtc_next_alarm_time(&alarm_tm, &now_tm, &alrm->time);
|
|
/* get new ticks for alarm in 24 hours */
|
|
rtc_tm_to_time(&alarm_tm, &ticks);
|
|
data = ticks - base;
|
|
|
|
buf[0] = data & 0xff;
|
|
buf[1] = (data >> 8) & 0xff;
|
|
buf[2] = (data >> 16) & 0xff;
|
|
buf[3] = (data >> 24) & 0xff;
|
|
pm860x_bulk_write(info->i2c, PM8607_RTC_EXPIRE1, 4, buf);
|
|
if (alrm->enabled) {
|
|
mask = ALARM | ALARM_WAKEUP | ALARM_EN;
|
|
pm860x_set_bits(info->i2c, PM8607_RTC1, mask, mask);
|
|
} else {
|
|
mask = ALARM | ALARM_WAKEUP | ALARM_EN;
|
|
pm860x_set_bits(info->i2c, PM8607_RTC1, mask,
|
|
ALARM | ALARM_WAKEUP);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static const struct rtc_class_ops pm860x_rtc_ops = {
|
|
.read_time = pm860x_rtc_read_time,
|
|
.set_time = pm860x_rtc_set_time,
|
|
.read_alarm = pm860x_rtc_read_alarm,
|
|
.set_alarm = pm860x_rtc_set_alarm,
|
|
.alarm_irq_enable = pm860x_rtc_alarm_irq_enable,
|
|
};
|
|
|
|
#ifdef VRTC_CALIBRATION
|
|
static void calibrate_vrtc_work(struct work_struct *work)
|
|
{
|
|
struct pm860x_rtc_info *info = container_of(work,
|
|
struct pm860x_rtc_info, calib_work.work);
|
|
unsigned char buf[2];
|
|
unsigned int sum, data, mean, vrtc_set;
|
|
int i;
|
|
|
|
for (i = 0, sum = 0; i < 16; i++) {
|
|
msleep(100);
|
|
pm860x_bulk_read(info->i2c, REG_VRTC_MEAS1, 2, buf);
|
|
data = (buf[0] << 4) | buf[1];
|
|
data = (data * 5400) >> 12; /* convert to mv */
|
|
sum += data;
|
|
}
|
|
mean = sum >> 4;
|
|
vrtc_set = 2700 + (info->vrtc & 0x3) * 200;
|
|
dev_dbg(info->dev, "mean:%d, vrtc_set:%d\n", mean, vrtc_set);
|
|
|
|
sum = pm860x_reg_read(info->i2c, PM8607_RTC_MISC1);
|
|
data = sum & 0x3;
|
|
if ((mean + 200) < vrtc_set) {
|
|
/* try higher voltage */
|
|
if (++data == 4)
|
|
goto out;
|
|
data = (sum & 0xf8) | (data & 0x3);
|
|
pm860x_reg_write(info->i2c, PM8607_RTC_MISC1, data);
|
|
} else if ((mean - 200) > vrtc_set) {
|
|
/* try lower voltage */
|
|
if (data-- == 0)
|
|
goto out;
|
|
data = (sum & 0xf8) | (data & 0x3);
|
|
pm860x_reg_write(info->i2c, PM8607_RTC_MISC1, data);
|
|
} else
|
|
goto out;
|
|
dev_dbg(info->dev, "set 0x%x to RTC_MISC1\n", data);
|
|
/* trigger next calibration since VRTC is updated */
|
|
schedule_delayed_work(&info->calib_work, VRTC_CALIB_INTERVAL);
|
|
return;
|
|
out:
|
|
/* disable measurement */
|
|
pm860x_set_bits(info->i2c, PM8607_MEAS_EN2, MEAS2_VRTC, 0);
|
|
dev_dbg(info->dev, "finish VRTC calibration\n");
|
|
return;
|
|
}
|
|
#endif
|
|
|
|
static int __devinit pm860x_rtc_probe(struct platform_device *pdev)
|
|
{
|
|
struct pm860x_chip *chip = dev_get_drvdata(pdev->dev.parent);
|
|
struct pm860x_rtc_pdata *pdata = NULL;
|
|
struct pm860x_rtc_info *info;
|
|
struct rtc_time tm;
|
|
unsigned long ticks = 0;
|
|
int ret;
|
|
|
|
pdata = pdev->dev.platform_data;
|
|
if (pdata == NULL)
|
|
dev_warn(&pdev->dev, "No platform data!\n");
|
|
|
|
info = kzalloc(sizeof(struct pm860x_rtc_info), GFP_KERNEL);
|
|
if (!info)
|
|
return -ENOMEM;
|
|
info->irq = platform_get_irq(pdev, 0);
|
|
if (info->irq < 0) {
|
|
dev_err(&pdev->dev, "No IRQ resource!\n");
|
|
ret = -EINVAL;
|
|
goto out;
|
|
}
|
|
|
|
info->chip = chip;
|
|
info->i2c = (chip->id == CHIP_PM8607) ? chip->client : chip->companion;
|
|
info->dev = &pdev->dev;
|
|
dev_set_drvdata(&pdev->dev, info);
|
|
|
|
ret = request_threaded_irq(info->irq, NULL, rtc_update_handler,
|
|
IRQF_ONESHOT, "rtc", info);
|
|
if (ret < 0) {
|
|
dev_err(chip->dev, "Failed to request IRQ: #%d: %d\n",
|
|
info->irq, ret);
|
|
goto out;
|
|
}
|
|
|
|
/* set addresses of 32-bit base value for RTC time */
|
|
pm860x_page_reg_write(info->i2c, REG0_ADDR, REG0_DATA);
|
|
pm860x_page_reg_write(info->i2c, REG1_ADDR, REG1_DATA);
|
|
pm860x_page_reg_write(info->i2c, REG2_ADDR, REG2_DATA);
|
|
pm860x_page_reg_write(info->i2c, REG3_ADDR, REG3_DATA);
|
|
|
|
ret = pm860x_rtc_read_time(&pdev->dev, &tm);
|
|
if (ret < 0) {
|
|
dev_err(&pdev->dev, "Failed to read initial time.\n");
|
|
goto out_rtc;
|
|
}
|
|
if ((tm.tm_year < 70) || (tm.tm_year > 138)) {
|
|
tm.tm_year = 70;
|
|
tm.tm_mon = 0;
|
|
tm.tm_mday = 1;
|
|
tm.tm_hour = 0;
|
|
tm.tm_min = 0;
|
|
tm.tm_sec = 0;
|
|
ret = pm860x_rtc_set_time(&pdev->dev, &tm);
|
|
if (ret < 0) {
|
|
dev_err(&pdev->dev, "Failed to set initial time.\n");
|
|
goto out_rtc;
|
|
}
|
|
}
|
|
rtc_tm_to_time(&tm, &ticks);
|
|
if (pdata && pdata->sync) {
|
|
pdata->sync(ticks);
|
|
info->sync = pdata->sync;
|
|
}
|
|
|
|
info->rtc_dev = rtc_device_register("88pm860x-rtc", &pdev->dev,
|
|
&pm860x_rtc_ops, THIS_MODULE);
|
|
ret = PTR_ERR(info->rtc_dev);
|
|
if (IS_ERR(info->rtc_dev)) {
|
|
dev_err(&pdev->dev, "Failed to register RTC device: %d\n", ret);
|
|
goto out_rtc;
|
|
}
|
|
|
|
/*
|
|
* enable internal XO instead of internal 3.25MHz clock since it can
|
|
* free running in PMIC power-down state.
|
|
*/
|
|
pm860x_set_bits(info->i2c, PM8607_RTC1, RTC1_USE_XO, RTC1_USE_XO);
|
|
|
|
#ifdef VRTC_CALIBRATION
|
|
/* <00> -- 2.7V, <01> -- 2.9V, <10> -- 3.1V, <11> -- 3.3V */
|
|
if (pdata && pdata->vrtc)
|
|
info->vrtc = pdata->vrtc & 0x3;
|
|
else
|
|
info->vrtc = 1;
|
|
pm860x_set_bits(info->i2c, PM8607_MEAS_EN2, MEAS2_VRTC, MEAS2_VRTC);
|
|
|
|
/* calibrate VRTC */
|
|
INIT_DELAYED_WORK(&info->calib_work, calibrate_vrtc_work);
|
|
schedule_delayed_work(&info->calib_work, VRTC_CALIB_INTERVAL);
|
|
#endif /* VRTC_CALIBRATION */
|
|
|
|
device_init_wakeup(&pdev->dev, 1);
|
|
|
|
return 0;
|
|
out_rtc:
|
|
free_irq(info->irq, info);
|
|
out:
|
|
kfree(info);
|
|
return ret;
|
|
}
|
|
|
|
static int __devexit pm860x_rtc_remove(struct platform_device *pdev)
|
|
{
|
|
struct pm860x_rtc_info *info = platform_get_drvdata(pdev);
|
|
|
|
#ifdef VRTC_CALIBRATION
|
|
flush_scheduled_work();
|
|
/* disable measurement */
|
|
pm860x_set_bits(info->i2c, PM8607_MEAS_EN2, MEAS2_VRTC, 0);
|
|
#endif /* VRTC_CALIBRATION */
|
|
|
|
platform_set_drvdata(pdev, NULL);
|
|
rtc_device_unregister(info->rtc_dev);
|
|
free_irq(info->irq, info);
|
|
kfree(info);
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static int pm860x_rtc_suspend(struct device *dev)
|
|
{
|
|
struct platform_device *pdev = to_platform_device(dev);
|
|
struct pm860x_chip *chip = dev_get_drvdata(pdev->dev.parent);
|
|
|
|
if (device_may_wakeup(dev))
|
|
chip->wakeup_flag |= 1 << PM8607_IRQ_RTC;
|
|
return 0;
|
|
}
|
|
static int pm860x_rtc_resume(struct device *dev)
|
|
{
|
|
struct platform_device *pdev = to_platform_device(dev);
|
|
struct pm860x_chip *chip = dev_get_drvdata(pdev->dev.parent);
|
|
|
|
if (device_may_wakeup(dev))
|
|
chip->wakeup_flag &= ~(1 << PM8607_IRQ_RTC);
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static SIMPLE_DEV_PM_OPS(pm860x_rtc_pm_ops, pm860x_rtc_suspend, pm860x_rtc_resume);
|
|
|
|
static struct platform_driver pm860x_rtc_driver = {
|
|
.driver = {
|
|
.name = "88pm860x-rtc",
|
|
.owner = THIS_MODULE,
|
|
.pm = &pm860x_rtc_pm_ops,
|
|
},
|
|
.probe = pm860x_rtc_probe,
|
|
.remove = __devexit_p(pm860x_rtc_remove),
|
|
};
|
|
|
|
module_platform_driver(pm860x_rtc_driver);
|
|
|
|
MODULE_DESCRIPTION("Marvell 88PM860x RTC driver");
|
|
MODULE_AUTHOR("Haojian Zhuang <haojian.zhuang@marvell.com>");
|
|
MODULE_LICENSE("GPL");
|