korg/linux
0
0
Fork 0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-11-18 17:54:13 +08:00
Code Issues Packages Projects Releases Wiki Activity
cc84e262b7
linux/drivers/acpi/acpica/psloop.c
Bob Moore f6a22b0bc4 ACPICA: Standardize integer output for ACPICA warnings/errors 
Always use 0x prefix for hex output, use %u for integer output
(all integers are unsigned.)

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-04-20 10:42:52 -04:00

1211 lines
32 KiB
C
Raw Blame History

/******************************************************************************
*
* Module Name: psloop - Main AML parse loop
*
*****************************************************************************/
/*
* Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification.
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
* substantially similar to the "NO WARRANTY" disclaimer below
* ("Disclaimer") and any redistribution must be conditioned upon
* including a substantially similar Disclaimer requirement for further
* binary redistribution.
* 3. Neither the names of the above-listed copyright holders nor the names
* of any contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* Alternatively, this software may be distributed under the terms of the
* GNU General Public License ("GPL") version 2 as published by the Free
* Software Foundation.
*
* NO WARRANTY
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
*/
/*
* Parse the AML and build an operation tree as most interpreters, (such as
* Perl) do. Parsing is done by hand rather than with a YACC generated parser
* to tightly constrain stack and dynamic memory usage. Parsing is kept
* flexible and the code fairly compact by parsing based on a list of AML
* opcode templates in aml_op_info[].
*/
#include <acpi/acpi.h>
#include "accommon.h"
#include "acparser.h"
#include "acdispat.h"
#include "amlcode.h"
#define _COMPONENT ACPI_PARSER
ACPI_MODULE_NAME("psloop")
static u32 acpi_gbl_depth = 0;
/* Local prototypes */
static acpi_status acpi_ps_get_aml_opcode(struct acpi_walk_state *walk_state);
static acpi_status
acpi_ps_build_named_op(struct acpi_walk_state *walk_state,
u8 * aml_op_start,
union acpi_parse_object *unnamed_op,
union acpi_parse_object **op);
static acpi_status
acpi_ps_create_op(struct acpi_walk_state *walk_state,
u8 * aml_op_start, union acpi_parse_object **new_op);
static acpi_status
acpi_ps_get_arguments(struct acpi_walk_state *walk_state,
u8 * aml_op_start, union acpi_parse_object *op);
static acpi_status
acpi_ps_complete_op(struct acpi_walk_state *walk_state,
union acpi_parse_object **op, acpi_status status);
static acpi_status
acpi_ps_complete_final_op(struct acpi_walk_state *walk_state,
union acpi_parse_object *op, acpi_status status);
static void
acpi_ps_link_module_code(union acpi_parse_object *parent_op,
u8 *aml_start, u32 aml_length, acpi_owner_id owner_id);
/*******************************************************************************
*
* FUNCTION: acpi_ps_get_aml_opcode
*
* PARAMETERS: walk_state - Current state
*
* RETURN: Status
*
* DESCRIPTION: Extract the next AML opcode from the input stream.
*
******************************************************************************/
static acpi_status acpi_ps_get_aml_opcode(struct acpi_walk_state *walk_state)
{
ACPI_FUNCTION_TRACE_PTR(ps_get_aml_opcode, walk_state);
walk_state->aml_offset =
(u32) ACPI_PTR_DIFF(walk_state->parser_state.aml,
walk_state->parser_state.aml_start);
walk_state->opcode = acpi_ps_peek_opcode(&(walk_state->parser_state));
/*
* First cut to determine what we have found:
* 1) A valid AML opcode
* 2) A name string
* 3) An unknown/invalid opcode
*/
walk_state->op_info = acpi_ps_get_opcode_info(walk_state->opcode);
switch (walk_state->op_info->class) {
case AML_CLASS_ASCII:
case AML_CLASS_PREFIX:
/*
* Starts with a valid prefix or ASCII char, this is a name
* string. Convert the bare name string to a namepath.
*/
walk_state->opcode = AML_INT_NAMEPATH_OP;
walk_state->arg_types = ARGP_NAMESTRING;
break;
case AML_CLASS_UNKNOWN:
/* The opcode is unrecognized. Just skip unknown opcodes */
ACPI_ERROR((AE_INFO,
"Found unknown opcode 0x%X at AML address %p offset 0x%X, ignoring",
walk_state->opcode, walk_state->parser_state.aml,
walk_state->aml_offset));
ACPI_DUMP_BUFFER(walk_state->parser_state.aml, 128);
/* Assume one-byte bad opcode */
walk_state->parser_state.aml++;
return_ACPI_STATUS(AE_CTRL_PARSE_CONTINUE);
default:
/* Found opcode info, this is a normal opcode */
walk_state->parser_state.aml +=
acpi_ps_get_opcode_size(walk_state->opcode);
walk_state->arg_types = walk_state->op_info->parse_args;
break;
}
return_ACPI_STATUS(AE_OK);
}
/*******************************************************************************
*
* FUNCTION: acpi_ps_build_named_op
*
* PARAMETERS: walk_state - Current state
* aml_op_start - Begin of named Op in AML
* unnamed_op - Early Op (not a named Op)
* Op - Returned Op
*
* RETURN: Status
*
* DESCRIPTION: Parse a named Op
*
******************************************************************************/
static acpi_status
acpi_ps_build_named_op(struct acpi_walk_state *walk_state,
u8 * aml_op_start,
union acpi_parse_object *unnamed_op,
union acpi_parse_object **op)
{
acpi_status status = AE_OK;
union acpi_parse_object *arg = NULL;
ACPI_FUNCTION_TRACE_PTR(ps_build_named_op, walk_state);
unnamed_op->common.value.arg = NULL;
unnamed_op->common.arg_list_length = 0;
unnamed_op->common.aml_opcode = walk_state->opcode;
/*
* Get and append arguments until we find the node that contains
* the name (the type ARGP_NAME).
*/
while (GET_CURRENT_ARG_TYPE(walk_state->arg_types) &&
(GET_CURRENT_ARG_TYPE(walk_state->arg_types) != ARGP_NAME)) {
status =
acpi_ps_get_next_arg(walk_state,
&(walk_state->parser_state),
GET_CURRENT_ARG_TYPE(walk_state->
arg_types), &arg);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
acpi_ps_append_arg(unnamed_op, arg);
INCREMENT_ARG_LIST(walk_state->arg_types);
}
/*
* Make sure that we found a NAME and didn't run out of arguments
*/
if (!GET_CURRENT_ARG_TYPE(walk_state->arg_types)) {
return_ACPI_STATUS(AE_AML_NO_OPERAND);
}
/* We know that this arg is a name, move to next arg */
INCREMENT_ARG_LIST(walk_state->arg_types);
/*
* Find the object. This will either insert the object into
* the namespace or simply look it up
*/
walk_state->op = NULL;
status = walk_state->descending_callback(walk_state, op);
if (ACPI_FAILURE(status)) {
ACPI_EXCEPTION((AE_INFO, status, "During name lookup/catalog"));
return_ACPI_STATUS(status);
}
if (!*op) {
return_ACPI_STATUS(AE_CTRL_PARSE_CONTINUE);
}
status = acpi_ps_next_parse_state(walk_state, *op, status);
if (ACPI_FAILURE(status)) {
if (status == AE_CTRL_PENDING) {
return_ACPI_STATUS(AE_CTRL_PARSE_PENDING);
}
return_ACPI_STATUS(status);
}
acpi_ps_append_arg(*op, unnamed_op->common.value.arg);
acpi_gbl_depth++;
if ((*op)->common.aml_opcode == AML_REGION_OP ||
(*op)->common.aml_opcode == AML_DATA_REGION_OP) {
/*
* Defer final parsing of an operation_region body, because we don't
* have enough info in the first pass to parse it correctly (i.e.,
* there may be method calls within the term_arg elements of the body.)
*
* However, we must continue parsing because the opregion is not a
* standalone package -- we don't know where the end is at this point.
*
* (Length is unknown until parse of the body complete)
*/
(*op)->named.data = aml_op_start;
(*op)->named.length = 0;
}
return_ACPI_STATUS(AE_OK);
}
/*******************************************************************************
*
* FUNCTION: acpi_ps_create_op
*
* PARAMETERS: walk_state - Current state
* aml_op_start - Op start in AML
* new_op - Returned Op
*
* RETURN: Status
*
* DESCRIPTION: Get Op from AML
*
******************************************************************************/
static acpi_status
acpi_ps_create_op(struct acpi_walk_state *walk_state,
u8 * aml_op_start, union acpi_parse_object **new_op)
{
acpi_status status = AE_OK;
union acpi_parse_object *op;
union acpi_parse_object *named_op = NULL;
union acpi_parse_object *parent_scope;
u8 argument_count;
const struct acpi_opcode_info *op_info;
ACPI_FUNCTION_TRACE_PTR(ps_create_op, walk_state);
status = acpi_ps_get_aml_opcode(walk_state);
if (status == AE_CTRL_PARSE_CONTINUE) {
return_ACPI_STATUS(AE_CTRL_PARSE_CONTINUE);
}
/* Create Op structure and append to parent's argument list */
walk_state->op_info = acpi_ps_get_opcode_info(walk_state->opcode);
op = acpi_ps_alloc_op(walk_state->opcode);
if (!op) {
return_ACPI_STATUS(AE_NO_MEMORY);
}
if (walk_state->op_info->flags & AML_NAMED) {
status =
acpi_ps_build_named_op(walk_state, aml_op_start, op,
&named_op);
acpi_ps_free_op(op);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
*new_op = named_op;
return_ACPI_STATUS(AE_OK);
}
/* Not a named opcode, just allocate Op and append to parent */
if (walk_state->op_info->flags & AML_CREATE) {
/*
* Backup to beginning of create_xXXfield declaration
* body_length is unknown until we parse the body
*/
op->named.data = aml_op_start;
op->named.length = 0;
}
if (walk_state->opcode == AML_BANK_FIELD_OP) {
/*
* Backup to beginning of bank_field declaration
* body_length is unknown until we parse the body
*/
op->named.data = aml_op_start;
op->named.length = 0;
}
parent_scope = acpi_ps_get_parent_scope(&(walk_state->parser_state));
acpi_ps_append_arg(parent_scope, op);
if (parent_scope) {
op_info =
acpi_ps_get_opcode_info(parent_scope->common.aml_opcode);
if (op_info->flags & AML_HAS_TARGET) {
argument_count =
acpi_ps_get_argument_count(op_info->type);
if (parent_scope->common.arg_list_length >
argument_count) {
op->common.flags |= ACPI_PARSEOP_TARGET;
}
} else if (parent_scope->common.aml_opcode == AML_INCREMENT_OP) {
op->common.flags |= ACPI_PARSEOP_TARGET;
}
}
if (walk_state->descending_callback != NULL) {
/*
* Find the object. This will either insert the object into
* the namespace or simply look it up
*/
walk_state->op = *new_op = op;
status = walk_state->descending_callback(walk_state, &op);
status = acpi_ps_next_parse_state(walk_state, op, status);
if (status == AE_CTRL_PENDING) {
status = AE_CTRL_PARSE_PENDING;
}
}
return_ACPI_STATUS(status);
}
/*******************************************************************************
*
* FUNCTION: acpi_ps_get_arguments
*
* PARAMETERS: walk_state - Current state
* aml_op_start - Op start in AML
* Op - Current Op
*
* RETURN: Status
*
* DESCRIPTION: Get arguments for passed Op.
*
******************************************************************************/
static acpi_status
acpi_ps_get_arguments(struct acpi_walk_state *walk_state,
u8 * aml_op_start, union acpi_parse_object *op)
{
acpi_status status = AE_OK;
union acpi_parse_object *arg = NULL;
const struct acpi_opcode_info *op_info;
ACPI_FUNCTION_TRACE_PTR(ps_get_arguments, walk_state);
switch (op->common.aml_opcode) {
case AML_BYTE_OP: /* AML_BYTEDATA_ARG */
case AML_WORD_OP: /* AML_WORDDATA_ARG */
case AML_DWORD_OP: /* AML_DWORDATA_ARG */
case AML_QWORD_OP: /* AML_QWORDATA_ARG */
case AML_STRING_OP: /* AML_ASCIICHARLIST_ARG */
/* Fill in constant or string argument directly */
acpi_ps_get_next_simple_arg(&(walk_state->parser_state),
GET_CURRENT_ARG_TYPE(walk_state->
arg_types),
op);
break;
case AML_INT_NAMEPATH_OP: /* AML_NAMESTRING_ARG */
status =
acpi_ps_get_next_namepath(walk_state,
&(walk_state->parser_state), op,
1);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
walk_state->arg_types = 0;
break;
default:
/*
* Op is not a constant or string, append each argument to the Op
*/
while (GET_CURRENT_ARG_TYPE(walk_state->arg_types)
&& !walk_state->arg_count) {
walk_state->aml_offset =
(u32) ACPI_PTR_DIFF(walk_state->parser_state.aml,
walk_state->parser_state.
aml_start);
status =
acpi_ps_get_next_arg(walk_state,
&(walk_state->parser_state),
GET_CURRENT_ARG_TYPE
(walk_state->arg_types), &arg);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
if (arg) {
arg->common.aml_offset = walk_state->aml_offset;
acpi_ps_append_arg(op, arg);
}
INCREMENT_ARG_LIST(walk_state->arg_types);
}
/*
* Handle executable code at "module-level". This refers to
* executable opcodes that appear outside of any control method.
*/
if ((walk_state->pass_number <= ACPI_IMODE_LOAD_PASS2) &&
((walk_state->parse_flags & ACPI_PARSE_DISASSEMBLE) == 0)) {
/*
* We want to skip If/Else/While constructs during Pass1 because we
* want to actually conditionally execute the code during Pass2.
*
* Except for disassembly, where we always want to walk the
* If/Else/While packages
*/
switch (op->common.aml_opcode) {
case AML_IF_OP:
case AML_ELSE_OP:
case AML_WHILE_OP:
/*
* Currently supported module-level opcodes are:
* IF/ELSE/WHILE. These appear to be the most common,
* and easiest to support since they open an AML
* package.
*/
if (walk_state->pass_number ==
ACPI_IMODE_LOAD_PASS1) {
acpi_ps_link_module_code(op->common.
parent,
aml_op_start,
(u32)
(walk_state->
parser_state.
pkg_end -
aml_op_start),
walk_state->
owner_id);
}
ACPI_DEBUG_PRINT((ACPI_DB_PARSE,
"Pass1: Skipping an If/Else/While body\n"));
/* Skip body of if/else/while in pass 1 */
walk_state->parser_state.aml =
walk_state->parser_state.pkg_end;
walk_state->arg_count = 0;
break;
default:
/*
* Check for an unsupported executable opcode at module
* level. We must be in PASS1, the parent must be a SCOPE,
* The opcode class must be EXECUTE, and the opcode must
* not be an argument to another opcode.
*/
if ((walk_state->pass_number ==
ACPI_IMODE_LOAD_PASS1)
&& (op->common.parent->common.aml_opcode ==
AML_SCOPE_OP)) {
op_info =
acpi_ps_get_opcode_info(op->common.
aml_opcode);
if ((op_info->class ==
AML_CLASS_EXECUTE) && (!arg)) {
ACPI_WARNING((AE_INFO,
"Detected an unsupported executable opcode "
"at module-level: [0x%.4X] at table offset 0x%.4X",
op->common.aml_opcode,
(u32)((aml_op_start - walk_state->parser_state.aml_start)
+ sizeof(struct acpi_table_header))));
}
}
break;
}
}
/* Special processing for certain opcodes */
switch (op->common.aml_opcode) {
case AML_METHOD_OP:
/*
* Skip parsing of control method because we don't have enough
* info in the first pass to parse it correctly.
*
* Save the length and address of the body
*/
op->named.data = walk_state->parser_state.aml;
op->named.length = (u32)
(walk_state->parser_state.pkg_end -
walk_state->parser_state.aml);
/* Skip body of method */
walk_state->parser_state.aml =
walk_state->parser_state.pkg_end;
walk_state->arg_count = 0;
break;
case AML_BUFFER_OP:
case AML_PACKAGE_OP:
case AML_VAR_PACKAGE_OP:
if ((op->common.parent) &&
(op->common.parent->common.aml_opcode ==
AML_NAME_OP)
&& (walk_state->pass_number <=
ACPI_IMODE_LOAD_PASS2)) {
/*
* Skip parsing of Buffers and Packages because we don't have
* enough info in the first pass to parse them correctly.
*/
op->named.data = aml_op_start;
op->named.length = (u32)
(walk_state->parser_state.pkg_end -
aml_op_start);
/* Skip body */
walk_state->parser_state.aml =
walk_state->parser_state.pkg_end;
walk_state->arg_count = 0;
}
break;
case AML_WHILE_OP:
if (walk_state->control_state) {
walk_state->control_state->control.package_end =
walk_state->parser_state.pkg_end;
}
break;
default:
/* No action for all other opcodes */
break;
}
break;
}
return_ACPI_STATUS(AE_OK);
}
/*******************************************************************************
*
* FUNCTION: acpi_ps_link_module_code
*
* PARAMETERS: parent_op - Parent parser op
* aml_start - Pointer to the AML
* aml_length - Length of executable AML
* owner_id - owner_id of module level code
*
* RETURN: None.
*
* DESCRIPTION: Wrap the module-level code with a method object and link the
* object to the global list. Note, the mutex field of the method
* object is used to link multiple module-level code objects.
*
******************************************************************************/
static void
acpi_ps_link_module_code(union acpi_parse_object *parent_op,
u8 *aml_start, u32 aml_length, acpi_owner_id owner_id)
{
union acpi_operand_object *prev;
union acpi_operand_object *next;
union acpi_operand_object *method_obj;
struct acpi_namespace_node *parent_node;
/* Get the tail of the list */
prev = next = acpi_gbl_module_code_list;
while (next) {
prev = next;
next = next->method.mutex;
}
/*
* Insert the module level code into the list. Merge it if it is
* adjacent to the previous element.
*/
if (!prev ||
((prev->method.aml_start + prev->method.aml_length) != aml_start)) {
/* Create, initialize, and link a new temporary method object */
method_obj = acpi_ut_create_internal_object(ACPI_TYPE_METHOD);
if (!method_obj) {
return;
}
if (parent_op->common.node) {
parent_node = parent_op->common.node;
} else {
parent_node = acpi_gbl_root_node;
}
method_obj->method.aml_start = aml_start;
method_obj->method.aml_length = aml_length;
method_obj->method.owner_id = owner_id;
method_obj->method.flags |= AOPOBJ_MODULE_LEVEL;
/*
* Save the parent node in next_object. This is cheating, but we
* don't want to expand the method object.
*/
method_obj->method.next_object =
ACPI_CAST_PTR(union acpi_operand_object, parent_node);
if (!prev) {
acpi_gbl_module_code_list = method_obj;
} else {
prev->method.mutex = method_obj;
}
} else {
prev->method.aml_length += aml_length;
}
}
/*******************************************************************************
*
* FUNCTION: acpi_ps_complete_op
*
* PARAMETERS: walk_state - Current state
* Op - Returned Op
* Status - Parse status before complete Op
*
* RETURN: Status
*
* DESCRIPTION: Complete Op
*
******************************************************************************/
static acpi_status
acpi_ps_complete_op(struct acpi_walk_state *walk_state,
union acpi_parse_object **op, acpi_status status)
{
acpi_status status2;
ACPI_FUNCTION_TRACE_PTR(ps_complete_op, walk_state);
/*
* Finished one argument of the containing scope
*/
walk_state->parser_state.scope->parse_scope.arg_count--;
/* Close this Op (will result in parse subtree deletion) */
status2 = acpi_ps_complete_this_op(walk_state, *op);
if (ACPI_FAILURE(status2)) {
return_ACPI_STATUS(status2);
}
*op = NULL;
switch (status) {
case AE_OK:
break;
case AE_CTRL_TRANSFER:
/* We are about to transfer to a called method */
walk_state->prev_op = NULL;
walk_state->prev_arg_types = walk_state->arg_types;
return_ACPI_STATUS(status);
case AE_CTRL_END:
acpi_ps_pop_scope(&(walk_state->parser_state), op,
&walk_state->arg_types,
&walk_state->arg_count);
if (*op) {
walk_state->op = *op;
walk_state->op_info =
acpi_ps_get_opcode_info((*op)->common.aml_opcode);
walk_state->opcode = (*op)->common.aml_opcode;
status = walk_state->ascending_callback(walk_state);
status =
acpi_ps_next_parse_state(walk_state, *op, status);
status2 = acpi_ps_complete_this_op(walk_state, *op);
if (ACPI_FAILURE(status2)) {
return_ACPI_STATUS(status2);
}
}
status = AE_OK;
break;
case AE_CTRL_BREAK:
case AE_CTRL_CONTINUE:
/* Pop off scopes until we find the While */
while (!(*op) || ((*op)->common.aml_opcode != AML_WHILE_OP)) {
acpi_ps_pop_scope(&(walk_state->parser_state), op,
&walk_state->arg_types,
&walk_state->arg_count);
}
/* Close this iteration of the While loop */
walk_state->op = *op;
walk_state->op_info =
acpi_ps_get_opcode_info((*op)->common.aml_opcode);
walk_state->opcode = (*op)->common.aml_opcode;
status = walk_state->ascending_callback(walk_state);
status = acpi_ps_next_parse_state(walk_state, *op, status);
status2 = acpi_ps_complete_this_op(walk_state, *op);
if (ACPI_FAILURE(status2)) {
return_ACPI_STATUS(status2);
}
status = AE_OK;
break;
case AE_CTRL_TERMINATE:
/* Clean up */
do {
if (*op) {
status2 =
acpi_ps_complete_this_op(walk_state, *op);
if (ACPI_FAILURE(status2)) {
return_ACPI_STATUS(status2);
}
acpi_ut_delete_generic_state
(acpi_ut_pop_generic_state
(&walk_state->control_state));
}
acpi_ps_pop_scope(&(walk_state->parser_state), op,
&walk_state->arg_types,
&walk_state->arg_count);
} while (*op);
return_ACPI_STATUS(AE_OK);
default: /* All other non-AE_OK status */
do {
if (*op) {
status2 =
acpi_ps_complete_this_op(walk_state, *op);
if (ACPI_FAILURE(status2)) {
return_ACPI_STATUS(status2);
}
}
acpi_ps_pop_scope(&(walk_state->parser_state), op,
&walk_state->arg_types,
&walk_state->arg_count);
} while (*op);
#if 0
/*
* TBD: Cleanup parse ops on error
*/
if (*op == NULL) {
acpi_ps_pop_scope(parser_state, op,
&walk_state->arg_types,
&walk_state->arg_count);
}
#endif
walk_state->prev_op = NULL;
walk_state->prev_arg_types = walk_state->arg_types;
return_ACPI_STATUS(status);
}
/* This scope complete? */
if (acpi_ps_has_completed_scope(&(walk_state->parser_state))) {
acpi_ps_pop_scope(&(walk_state->parser_state), op,
&walk_state->arg_types,
&walk_state->arg_count);
ACPI_DEBUG_PRINT((ACPI_DB_PARSE, "Popped scope, Op=%p\n", *op));
} else {
*op = NULL;
}
ACPI_PREEMPTION_POINT();
return_ACPI_STATUS(AE_OK);
}
/*******************************************************************************
*
* FUNCTION: acpi_ps_complete_final_op
*
* PARAMETERS: walk_state - Current state
* Op - Current Op
* Status - Current parse status before complete last
* Op
*
* RETURN: Status
*
* DESCRIPTION: Complete last Op.
*
******************************************************************************/
static acpi_status
acpi_ps_complete_final_op(struct acpi_walk_state *walk_state,
union acpi_parse_object *op, acpi_status status)
{
acpi_status status2;
ACPI_FUNCTION_TRACE_PTR(ps_complete_final_op, walk_state);
/*
* Complete the last Op (if not completed), and clear the scope stack.
* It is easily possible to end an AML "package" with an unbounded number
* of open scopes (such as when several ASL blocks are closed with
* sequential closing braces). We want to terminate each one cleanly.
*/
ACPI_DEBUG_PRINT((ACPI_DB_PARSE, "AML package complete at Op %p\n",
op));
do {
if (op) {
if (walk_state->ascending_callback != NULL) {
walk_state->op = op;
walk_state->op_info =
acpi_ps_get_opcode_info(op->common.
aml_opcode);
walk_state->opcode = op->common.aml_opcode;
status =
walk_state->ascending_callback(walk_state);
status =
acpi_ps_next_parse_state(walk_state, op,
status);
if (status == AE_CTRL_PENDING) {
status =
acpi_ps_complete_op(walk_state, &op,
AE_OK);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
}
if (status == AE_CTRL_TERMINATE) {
status = AE_OK;
/* Clean up */
do {
if (op) {
status2 =
acpi_ps_complete_this_op
(walk_state, op);
if (ACPI_FAILURE
(status2)) {
return_ACPI_STATUS
(status2);
}
}
acpi_ps_pop_scope(&
(walk_state->
parser_state),
&op,
&walk_state->
arg_types,
&walk_state->
arg_count);
} while (op);
return_ACPI_STATUS(status);
}
else if (ACPI_FAILURE(status)) {
/* First error is most important */
(void)
acpi_ps_complete_this_op(walk_state,
op);
return_ACPI_STATUS(status);
}
}
status2 = acpi_ps_complete_this_op(walk_state, op);
if (ACPI_FAILURE(status2)) {
return_ACPI_STATUS(status2);
}
}
acpi_ps_pop_scope(&(walk_state->parser_state), &op,
&walk_state->arg_types,
&walk_state->arg_count);
} while (op);
return_ACPI_STATUS(status);
}
/*******************************************************************************
*
* FUNCTION: acpi_ps_parse_loop
*
* PARAMETERS: walk_state - Current state
*
* RETURN: Status
*
* DESCRIPTION: Parse AML (pointed to by the current parser state) and return
* a tree of ops.
*
******************************************************************************/
acpi_status acpi_ps_parse_loop(struct acpi_walk_state *walk_state)
{
acpi_status status = AE_OK;
union acpi_parse_object *op = NULL; /* current op */
struct acpi_parse_state *parser_state;
u8 *aml_op_start = NULL;
ACPI_FUNCTION_TRACE_PTR(ps_parse_loop, walk_state);
if (walk_state->descending_callback == NULL) {
return_ACPI_STATUS(AE_BAD_PARAMETER);
}
parser_state = &walk_state->parser_state;
walk_state->arg_types = 0;
#if (!defined (ACPI_NO_METHOD_EXECUTION) && !defined (ACPI_CONSTANT_EVAL_ONLY))
if (walk_state->walk_type & ACPI_WALK_METHOD_RESTART) {
/* We are restarting a preempted control method */
if (acpi_ps_has_completed_scope(parser_state)) {
/*
* We must check if a predicate to an IF or WHILE statement
* was just completed
*/
if ((parser_state->scope->parse_scope.op) &&
((parser_state->scope->parse_scope.op->common.
aml_opcode == AML_IF_OP)
|| (parser_state->scope->parse_scope.op->common.
aml_opcode == AML_WHILE_OP))
&& (walk_state->control_state)
&& (walk_state->control_state->common.state ==
ACPI_CONTROL_PREDICATE_EXECUTING)) {
/*
* A predicate was just completed, get the value of the
* predicate and branch based on that value
*/
walk_state->op = NULL;
status =
acpi_ds_get_predicate_value(walk_state,
ACPI_TO_POINTER
(TRUE));
if (ACPI_FAILURE(status)
&& ((status & AE_CODE_MASK) !=
AE_CODE_CONTROL)) {
if (status == AE_AML_NO_RETURN_VALUE) {
ACPI_EXCEPTION((AE_INFO, status,
"Invoked method did not return a value"));
}
ACPI_EXCEPTION((AE_INFO, status,
"GetPredicate Failed"));
return_ACPI_STATUS(status);
}
status =
acpi_ps_next_parse_state(walk_state, op,
status);
}
acpi_ps_pop_scope(parser_state, &op,
&walk_state->arg_types,
&walk_state->arg_count);
ACPI_DEBUG_PRINT((ACPI_DB_PARSE,
"Popped scope, Op=%p\n", op));
} else if (walk_state->prev_op) {
/* We were in the middle of an op */
op = walk_state->prev_op;
walk_state->arg_types = walk_state->prev_arg_types;
}
}
#endif
/* Iterative parsing loop, while there is more AML to process: */
while ((parser_state->aml < parser_state->aml_end) || (op)) {
aml_op_start = parser_state->aml;
if (!op) {
status =
acpi_ps_create_op(walk_state, aml_op_start, &op);
if (ACPI_FAILURE(status)) {
if (status == AE_CTRL_PARSE_CONTINUE) {
continue;
}
if (status == AE_CTRL_PARSE_PENDING) {
status = AE_OK;
}
status =
acpi_ps_complete_op(walk_state, &op,
status);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
continue;
}
op->common.aml_offset = walk_state->aml_offset;
if (walk_state->op_info) {
ACPI_DEBUG_PRINT((ACPI_DB_PARSE,
"Opcode %4.4X [%s] Op %p Aml %p AmlOffset %5.5X\n",
(u32) op->common.aml_opcode,
walk_state->op_info->name, op,
parser_state->aml,
op->common.aml_offset));
}
}
/*
* Start arg_count at zero because we don't know if there are
* any args yet
*/
walk_state->arg_count = 0;
/* Are there any arguments that must be processed? */
if (walk_state->arg_types) {
/* Get arguments */
status =
acpi_ps_get_arguments(walk_state, aml_op_start, op);
if (ACPI_FAILURE(status)) {
status =
acpi_ps_complete_op(walk_state, &op,
status);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
continue;
}
}
/* Check for arguments that need to be processed */
if (walk_state->arg_count) {
/*
* There are arguments (complex ones), push Op and
* prepare for argument
*/
status = acpi_ps_push_scope(parser_state, op,
walk_state->arg_types,
walk_state->arg_count);
if (ACPI_FAILURE(status)) {
status =
acpi_ps_complete_op(walk_state, &op,
status);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
continue;
}
op = NULL;
continue;
}
/*
* All arguments have been processed -- Op is complete,
* prepare for next
*/
walk_state->op_info =
acpi_ps_get_opcode_info(op->common.aml_opcode);
if (walk_state->op_info->flags & AML_NAMED) {
if (acpi_gbl_depth) {
acpi_gbl_depth--;
}
if (op->common.aml_opcode == AML_REGION_OP ||
op->common.aml_opcode == AML_DATA_REGION_OP) {
/*
* Skip parsing of control method or opregion body,
* because we don't have enough info in the first pass
* to parse them correctly.
*
* Completed parsing an op_region declaration, we now
* know the length.
*/
op->named.length =
(u32) (parser_state->aml - op->named.data);
}
}
if (walk_state->op_info->flags & AML_CREATE) {
/*
* Backup to beginning of create_xXXfield declaration (1 for
* Opcode)
*
* body_length is unknown until we parse the body
*/
op->named.length =
(u32) (parser_state->aml - op->named.data);
}
if (op->common.aml_opcode == AML_BANK_FIELD_OP) {
/*
* Backup to beginning of bank_field declaration
*
* body_length is unknown until we parse the body
*/
op->named.length =
(u32) (parser_state->aml - op->named.data);
}
/* This op complete, notify the dispatcher */
if (walk_state->ascending_callback != NULL) {
walk_state->op = op;
walk_state->opcode = op->common.aml_opcode;
status = walk_state->ascending_callback(walk_state);
status =
acpi_ps_next_parse_state(walk_state, op, status);
if (status == AE_CTRL_PENDING) {
status = AE_OK;
}
}
status = acpi_ps_complete_op(walk_state, &op, status);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
} /* while parser_state->Aml */
status = acpi_ps_complete_final_op(walk_state, op, status);
return_ACPI_STATUS(status);
}
Reference in New Issue View Git Blame Copy Permalink