mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-11 12:28:41 +08:00
63aadb7766
Coldfire is now the only target that implements the clk_get()/clk_put() helpers itself rather than using the common implementation. Most coldfire variants only have two distinct clocks and use the clk code purely for lookup. Change those over to use clkdev_lookup instead but leave the custom clk interface for those two clocks. Also leave the four SoCs that have gated clocks. Acked-by: Greg Ungerer <gerg@linux-m68k.org> Tested-by: Greg Ungerer <gerg@linux-m68k.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
147 lines
4.0 KiB
C
147 lines
4.0 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/***************************************************************************/
|
|
|
|
/*
|
|
* m527x.c -- platform support for ColdFire 527x based boards
|
|
*
|
|
* Sub-architcture dependent initialization code for the Freescale
|
|
* 5270/5271 and 5274/5275 CPUs.
|
|
*
|
|
* Copyright (C) 1999-2004, Greg Ungerer (gerg@snapgear.com)
|
|
* Copyright (C) 2001-2004, SnapGear Inc. (www.snapgear.com)
|
|
*/
|
|
|
|
/***************************************************************************/
|
|
|
|
#include <linux/clkdev.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/param.h>
|
|
#include <linux/init.h>
|
|
#include <linux/io.h>
|
|
#include <asm/machdep.h>
|
|
#include <asm/coldfire.h>
|
|
#include <asm/mcfsim.h>
|
|
#include <asm/mcfuart.h>
|
|
#include <asm/mcfclk.h>
|
|
|
|
/***************************************************************************/
|
|
|
|
DEFINE_CLK(pll, "pll.0", MCF_CLK);
|
|
DEFINE_CLK(sys, "sys.0", MCF_BUSCLK);
|
|
|
|
static struct clk_lookup m527x_clk_lookup[] = {
|
|
CLKDEV_INIT(NULL, "pll.0", &clk_pll),
|
|
CLKDEV_INIT(NULL, "sys.0", &clk_sys),
|
|
CLKDEV_INIT("mcfpit.0", NULL, &clk_pll),
|
|
CLKDEV_INIT("mcfpit.1", NULL, &clk_pll),
|
|
CLKDEV_INIT("mcfpit.2", NULL, &clk_pll),
|
|
CLKDEV_INIT("mcfpit.3", NULL, &clk_pll),
|
|
CLKDEV_INIT("mcfuart.0", NULL, &clk_sys),
|
|
CLKDEV_INIT("mcfuart.1", NULL, &clk_sys),
|
|
CLKDEV_INIT("mcfuart.2", NULL, &clk_sys),
|
|
CLKDEV_INIT("mcfqspi.0", NULL, &clk_sys),
|
|
CLKDEV_INIT("fec.0", NULL, &clk_sys),
|
|
CLKDEV_INIT("fec.1", NULL, &clk_sys),
|
|
CLKDEV_INIT("imx1-i2c.0", NULL, &clk_sys),
|
|
};
|
|
|
|
/***************************************************************************/
|
|
|
|
static void __init m527x_qspi_init(void)
|
|
{
|
|
#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
|
|
#if defined(CONFIG_M5271)
|
|
u16 par;
|
|
|
|
/* setup QSPS pins for QSPI with gpio CS control */
|
|
writeb(0x1f, MCFGPIO_PAR_QSPI);
|
|
/* and CS2 & CS3 as gpio */
|
|
par = readw(MCFGPIO_PAR_TIMER);
|
|
par &= 0x3f3f;
|
|
writew(par, MCFGPIO_PAR_TIMER);
|
|
#elif defined(CONFIG_M5275)
|
|
/* setup QSPS pins for QSPI with gpio CS control */
|
|
writew(0x003e, MCFGPIO_PAR_QSPI);
|
|
#endif
|
|
#endif /* IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) */
|
|
}
|
|
|
|
/***************************************************************************/
|
|
|
|
static void __init m527x_i2c_init(void)
|
|
{
|
|
#if IS_ENABLED(CONFIG_I2C_IMX)
|
|
#if defined(CONFIG_M5271)
|
|
u8 par;
|
|
|
|
/* setup Port FECI2C Pin Assignment Register for I2C */
|
|
/* set PAR_SCL to SCL and PAR_SDA to SDA */
|
|
par = readb(MCFGPIO_PAR_FECI2C);
|
|
par |= 0x0f;
|
|
writeb(par, MCFGPIO_PAR_FECI2C);
|
|
#elif defined(CONFIG_M5275)
|
|
u16 par;
|
|
|
|
/* setup Port FECI2C Pin Assignment Register for I2C */
|
|
/* set PAR_SCL to SCL and PAR_SDA to SDA */
|
|
par = readw(MCFGPIO_PAR_FECI2C);
|
|
par |= 0x0f;
|
|
writew(par, MCFGPIO_PAR_FECI2C);
|
|
#endif
|
|
#endif /* IS_ENABLED(CONFIG_I2C_IMX) */
|
|
}
|
|
|
|
/***************************************************************************/
|
|
|
|
static void __init m527x_uarts_init(void)
|
|
{
|
|
u16 sepmask;
|
|
|
|
/*
|
|
* External Pin Mask Setting & Enable External Pin for Interface
|
|
*/
|
|
sepmask = readw(MCFGPIO_PAR_UART);
|
|
sepmask |= UART0_ENABLE_MASK | UART1_ENABLE_MASK | UART2_ENABLE_MASK;
|
|
writew(sepmask, MCFGPIO_PAR_UART);
|
|
}
|
|
|
|
/***************************************************************************/
|
|
|
|
static void __init m527x_fec_init(void)
|
|
{
|
|
u8 v;
|
|
|
|
/* Set multi-function pins to ethernet mode for fec0 */
|
|
#if defined(CONFIG_M5271)
|
|
v = readb(MCFGPIO_PAR_FECI2C);
|
|
writeb(v | 0xf0, MCFGPIO_PAR_FECI2C);
|
|
#else
|
|
u16 par;
|
|
|
|
par = readw(MCFGPIO_PAR_FECI2C);
|
|
writew(par | 0xf00, MCFGPIO_PAR_FECI2C);
|
|
v = readb(MCFGPIO_PAR_FEC0HL);
|
|
writeb(v | 0xc0, MCFGPIO_PAR_FEC0HL);
|
|
|
|
/* Set multi-function pins to ethernet mode for fec1 */
|
|
par = readw(MCFGPIO_PAR_FECI2C);
|
|
writew(par | 0xa0, MCFGPIO_PAR_FECI2C);
|
|
v = readb(MCFGPIO_PAR_FEC1HL);
|
|
writeb(v | 0xc0, MCFGPIO_PAR_FEC1HL);
|
|
#endif
|
|
}
|
|
|
|
/***************************************************************************/
|
|
|
|
void __init config_BSP(char *commandp, int size)
|
|
{
|
|
mach_sched_init = hw_timer_init;
|
|
m527x_uarts_init();
|
|
m527x_fec_init();
|
|
m527x_qspi_init();
|
|
m527x_i2c_init();
|
|
clkdev_add_table(m527x_clk_lookup, ARRAY_SIZE(m527x_clk_lookup));
|
|
}
|
|
|
|
/***************************************************************************/
|