mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-15 16:24:13 +08:00
cb99864d40
This patch is the result of a lot of trial and error, since there are no specs available for the device. Full duplex support is provided, i.e. playback and recording in stereo. The format is hardcoded at 48000Hz @ 24 bit, which is the maximum that the device supports. Also, MIDI in and MIDI out both work. Users will notice that the S/PDIF light also flashes when playback or recording is active. I believe this means that S/PDIF input/output is simultaneously activated with the analogue i/o during use. But this particular functionality remains untested. Note that this particular version of the patch is so far untested on the physical hardware because I have not compiled a full kernel with the changes. However, extensive testing has been done by many users of the hardware who believe other versions of my patch have worked since circa 2009. [Modified to make a function static by tiwai] Signed-off-by: Damien Zammit <damien@zamaudio.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
879 lines
26 KiB
C
879 lines
26 KiB
C
/*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/usb.h>
|
|
#include <linux/usb/audio.h>
|
|
|
|
#include <sound/control.h>
|
|
#include <sound/core.h>
|
|
#include <sound/info.h>
|
|
#include <sound/pcm.h>
|
|
|
|
#include "usbaudio.h"
|
|
#include "card.h"
|
|
#include "mixer.h"
|
|
#include "mixer_quirks.h"
|
|
#include "midi.h"
|
|
#include "quirks.h"
|
|
#include "helper.h"
|
|
#include "endpoint.h"
|
|
#include "pcm.h"
|
|
#include "clock.h"
|
|
#include "stream.h"
|
|
|
|
/*
|
|
* handle the quirks for the contained interfaces
|
|
*/
|
|
static int create_composite_quirk(struct snd_usb_audio *chip,
|
|
struct usb_interface *iface,
|
|
struct usb_driver *driver,
|
|
const struct snd_usb_audio_quirk *quirk)
|
|
{
|
|
int probed_ifnum = get_iface_desc(iface->altsetting)->bInterfaceNumber;
|
|
int err;
|
|
|
|
for (quirk = quirk->data; quirk->ifnum >= 0; ++quirk) {
|
|
iface = usb_ifnum_to_if(chip->dev, quirk->ifnum);
|
|
if (!iface)
|
|
continue;
|
|
if (quirk->ifnum != probed_ifnum &&
|
|
usb_interface_claimed(iface))
|
|
continue;
|
|
err = snd_usb_create_quirk(chip, iface, driver, quirk);
|
|
if (err < 0)
|
|
return err;
|
|
if (quirk->ifnum != probed_ifnum)
|
|
usb_driver_claim_interface(driver, iface, (void *)-1L);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int ignore_interface_quirk(struct snd_usb_audio *chip,
|
|
struct usb_interface *iface,
|
|
struct usb_driver *driver,
|
|
const struct snd_usb_audio_quirk *quirk)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
|
|
/*
|
|
* Allow alignment on audio sub-slot (channel samples) rather than
|
|
* on audio slots (audio frames)
|
|
*/
|
|
static int create_align_transfer_quirk(struct snd_usb_audio *chip,
|
|
struct usb_interface *iface,
|
|
struct usb_driver *driver,
|
|
const struct snd_usb_audio_quirk *quirk)
|
|
{
|
|
chip->txfr_quirk = 1;
|
|
return 1; /* Continue with creating streams and mixer */
|
|
}
|
|
|
|
static int create_any_midi_quirk(struct snd_usb_audio *chip,
|
|
struct usb_interface *intf,
|
|
struct usb_driver *driver,
|
|
const struct snd_usb_audio_quirk *quirk)
|
|
{
|
|
return snd_usbmidi_create(chip->card, intf, &chip->midi_list, quirk);
|
|
}
|
|
|
|
/*
|
|
* create a stream for an interface with proper descriptors
|
|
*/
|
|
static int create_standard_audio_quirk(struct snd_usb_audio *chip,
|
|
struct usb_interface *iface,
|
|
struct usb_driver *driver,
|
|
const struct snd_usb_audio_quirk *quirk)
|
|
{
|
|
struct usb_host_interface *alts;
|
|
struct usb_interface_descriptor *altsd;
|
|
int err;
|
|
|
|
alts = &iface->altsetting[0];
|
|
altsd = get_iface_desc(alts);
|
|
err = snd_usb_parse_audio_interface(chip, altsd->bInterfaceNumber);
|
|
if (err < 0) {
|
|
snd_printk(KERN_ERR "cannot setup if %d: error %d\n",
|
|
altsd->bInterfaceNumber, err);
|
|
return err;
|
|
}
|
|
/* reset the current interface */
|
|
usb_set_interface(chip->dev, altsd->bInterfaceNumber, 0);
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* create a stream for an endpoint/altsetting without proper descriptors
|
|
*/
|
|
static int create_fixed_stream_quirk(struct snd_usb_audio *chip,
|
|
struct usb_interface *iface,
|
|
struct usb_driver *driver,
|
|
const struct snd_usb_audio_quirk *quirk)
|
|
{
|
|
struct audioformat *fp;
|
|
struct usb_host_interface *alts;
|
|
int stream, err;
|
|
unsigned *rate_table = NULL;
|
|
|
|
fp = kmemdup(quirk->data, sizeof(*fp), GFP_KERNEL);
|
|
if (!fp) {
|
|
snd_printk(KERN_ERR "cannot memdup\n");
|
|
return -ENOMEM;
|
|
}
|
|
if (fp->nr_rates > MAX_NR_RATES) {
|
|
kfree(fp);
|
|
return -EINVAL;
|
|
}
|
|
if (fp->nr_rates > 0) {
|
|
rate_table = kmemdup(fp->rate_table,
|
|
sizeof(int) * fp->nr_rates, GFP_KERNEL);
|
|
if (!rate_table) {
|
|
kfree(fp);
|
|
return -ENOMEM;
|
|
}
|
|
fp->rate_table = rate_table;
|
|
}
|
|
|
|
stream = (fp->endpoint & USB_DIR_IN)
|
|
? SNDRV_PCM_STREAM_CAPTURE : SNDRV_PCM_STREAM_PLAYBACK;
|
|
err = snd_usb_add_audio_stream(chip, stream, fp);
|
|
if (err < 0) {
|
|
kfree(fp);
|
|
kfree(rate_table);
|
|
return err;
|
|
}
|
|
if (fp->iface != get_iface_desc(&iface->altsetting[0])->bInterfaceNumber ||
|
|
fp->altset_idx >= iface->num_altsetting) {
|
|
kfree(fp);
|
|
kfree(rate_table);
|
|
return -EINVAL;
|
|
}
|
|
alts = &iface->altsetting[fp->altset_idx];
|
|
fp->datainterval = snd_usb_parse_datainterval(chip, alts);
|
|
fp->maxpacksize = le16_to_cpu(get_endpoint(alts, 0)->wMaxPacketSize);
|
|
usb_set_interface(chip->dev, fp->iface, 0);
|
|
snd_usb_init_pitch(chip, fp->iface, alts, fp);
|
|
snd_usb_init_sample_rate(chip, fp->iface, alts, fp, fp->rate_max);
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Create a stream for an Edirol UA-700/UA-25/UA-4FX interface.
|
|
* The only way to detect the sample rate is by looking at wMaxPacketSize.
|
|
*/
|
|
static int create_uaxx_quirk(struct snd_usb_audio *chip,
|
|
struct usb_interface *iface,
|
|
struct usb_driver *driver,
|
|
const struct snd_usb_audio_quirk *quirk)
|
|
{
|
|
static const struct audioformat ua_format = {
|
|
.formats = SNDRV_PCM_FMTBIT_S24_3LE,
|
|
.channels = 2,
|
|
.fmt_type = UAC_FORMAT_TYPE_I,
|
|
.altsetting = 1,
|
|
.altset_idx = 1,
|
|
.rates = SNDRV_PCM_RATE_CONTINUOUS,
|
|
};
|
|
struct usb_host_interface *alts;
|
|
struct usb_interface_descriptor *altsd;
|
|
struct audioformat *fp;
|
|
int stream, err;
|
|
|
|
/* both PCM and MIDI interfaces have 2 or more altsettings */
|
|
if (iface->num_altsetting < 2)
|
|
return -ENXIO;
|
|
alts = &iface->altsetting[1];
|
|
altsd = get_iface_desc(alts);
|
|
|
|
if (altsd->bNumEndpoints == 2) {
|
|
static const struct snd_usb_midi_endpoint_info ua700_ep = {
|
|
.out_cables = 0x0003,
|
|
.in_cables = 0x0003
|
|
};
|
|
static const struct snd_usb_audio_quirk ua700_quirk = {
|
|
.type = QUIRK_MIDI_FIXED_ENDPOINT,
|
|
.data = &ua700_ep
|
|
};
|
|
static const struct snd_usb_midi_endpoint_info uaxx_ep = {
|
|
.out_cables = 0x0001,
|
|
.in_cables = 0x0001
|
|
};
|
|
static const struct snd_usb_audio_quirk uaxx_quirk = {
|
|
.type = QUIRK_MIDI_FIXED_ENDPOINT,
|
|
.data = &uaxx_ep
|
|
};
|
|
const struct snd_usb_audio_quirk *quirk =
|
|
chip->usb_id == USB_ID(0x0582, 0x002b)
|
|
? &ua700_quirk : &uaxx_quirk;
|
|
return snd_usbmidi_create(chip->card, iface,
|
|
&chip->midi_list, quirk);
|
|
}
|
|
|
|
if (altsd->bNumEndpoints != 1)
|
|
return -ENXIO;
|
|
|
|
fp = kmemdup(&ua_format, sizeof(*fp), GFP_KERNEL);
|
|
if (!fp)
|
|
return -ENOMEM;
|
|
|
|
fp->iface = altsd->bInterfaceNumber;
|
|
fp->endpoint = get_endpoint(alts, 0)->bEndpointAddress;
|
|
fp->ep_attr = get_endpoint(alts, 0)->bmAttributes;
|
|
fp->datainterval = 0;
|
|
fp->maxpacksize = le16_to_cpu(get_endpoint(alts, 0)->wMaxPacketSize);
|
|
|
|
switch (fp->maxpacksize) {
|
|
case 0x120:
|
|
fp->rate_max = fp->rate_min = 44100;
|
|
break;
|
|
case 0x138:
|
|
case 0x140:
|
|
fp->rate_max = fp->rate_min = 48000;
|
|
break;
|
|
case 0x258:
|
|
case 0x260:
|
|
fp->rate_max = fp->rate_min = 96000;
|
|
break;
|
|
default:
|
|
snd_printk(KERN_ERR "unknown sample rate\n");
|
|
kfree(fp);
|
|
return -ENXIO;
|
|
}
|
|
|
|
stream = (fp->endpoint & USB_DIR_IN)
|
|
? SNDRV_PCM_STREAM_CAPTURE : SNDRV_PCM_STREAM_PLAYBACK;
|
|
err = snd_usb_add_audio_stream(chip, stream, fp);
|
|
if (err < 0) {
|
|
kfree(fp);
|
|
return err;
|
|
}
|
|
usb_set_interface(chip->dev, fp->iface, 0);
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Create a standard mixer for the specified interface.
|
|
*/
|
|
static int create_standard_mixer_quirk(struct snd_usb_audio *chip,
|
|
struct usb_interface *iface,
|
|
struct usb_driver *driver,
|
|
const struct snd_usb_audio_quirk *quirk)
|
|
{
|
|
if (quirk->ifnum < 0)
|
|
return 0;
|
|
|
|
return snd_usb_create_mixer(chip, quirk->ifnum, 0);
|
|
}
|
|
|
|
/*
|
|
* audio-interface quirks
|
|
*
|
|
* returns zero if no standard audio/MIDI parsing is needed.
|
|
* returns a positive value if standard audio/midi interfaces are parsed
|
|
* after this.
|
|
* returns a negative value at error.
|
|
*/
|
|
int snd_usb_create_quirk(struct snd_usb_audio *chip,
|
|
struct usb_interface *iface,
|
|
struct usb_driver *driver,
|
|
const struct snd_usb_audio_quirk *quirk)
|
|
{
|
|
typedef int (*quirk_func_t)(struct snd_usb_audio *,
|
|
struct usb_interface *,
|
|
struct usb_driver *,
|
|
const struct snd_usb_audio_quirk *);
|
|
static const quirk_func_t quirk_funcs[] = {
|
|
[QUIRK_IGNORE_INTERFACE] = ignore_interface_quirk,
|
|
[QUIRK_COMPOSITE] = create_composite_quirk,
|
|
[QUIRK_MIDI_STANDARD_INTERFACE] = create_any_midi_quirk,
|
|
[QUIRK_MIDI_FIXED_ENDPOINT] = create_any_midi_quirk,
|
|
[QUIRK_MIDI_YAMAHA] = create_any_midi_quirk,
|
|
[QUIRK_MIDI_MIDIMAN] = create_any_midi_quirk,
|
|
[QUIRK_MIDI_NOVATION] = create_any_midi_quirk,
|
|
[QUIRK_MIDI_MBOX2] = create_any_midi_quirk,
|
|
[QUIRK_MIDI_RAW_BYTES] = create_any_midi_quirk,
|
|
[QUIRK_MIDI_EMAGIC] = create_any_midi_quirk,
|
|
[QUIRK_MIDI_CME] = create_any_midi_quirk,
|
|
[QUIRK_MIDI_AKAI] = create_any_midi_quirk,
|
|
[QUIRK_MIDI_FTDI] = create_any_midi_quirk,
|
|
[QUIRK_AUDIO_STANDARD_INTERFACE] = create_standard_audio_quirk,
|
|
[QUIRK_AUDIO_FIXED_ENDPOINT] = create_fixed_stream_quirk,
|
|
[QUIRK_AUDIO_EDIROL_UAXX] = create_uaxx_quirk,
|
|
[QUIRK_AUDIO_ALIGN_TRANSFER] = create_align_transfer_quirk,
|
|
[QUIRK_AUDIO_STANDARD_MIXER] = create_standard_mixer_quirk,
|
|
};
|
|
|
|
if (quirk->type < QUIRK_TYPE_COUNT) {
|
|
return quirk_funcs[quirk->type](chip, iface, driver, quirk);
|
|
} else {
|
|
snd_printd(KERN_ERR "invalid quirk type %d\n", quirk->type);
|
|
return -ENXIO;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* boot quirks
|
|
*/
|
|
|
|
#define EXTIGY_FIRMWARE_SIZE_OLD 794
|
|
#define EXTIGY_FIRMWARE_SIZE_NEW 483
|
|
|
|
static int snd_usb_extigy_boot_quirk(struct usb_device *dev, struct usb_interface *intf)
|
|
{
|
|
struct usb_host_config *config = dev->actconfig;
|
|
int err;
|
|
|
|
if (le16_to_cpu(get_cfg_desc(config)->wTotalLength) == EXTIGY_FIRMWARE_SIZE_OLD ||
|
|
le16_to_cpu(get_cfg_desc(config)->wTotalLength) == EXTIGY_FIRMWARE_SIZE_NEW) {
|
|
snd_printdd("sending Extigy boot sequence...\n");
|
|
/* Send message to force it to reconnect with full interface. */
|
|
err = snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev,0),
|
|
0x10, 0x43, 0x0001, 0x000a, NULL, 0);
|
|
if (err < 0) snd_printdd("error sending boot message: %d\n", err);
|
|
err = usb_get_descriptor(dev, USB_DT_DEVICE, 0,
|
|
&dev->descriptor, sizeof(dev->descriptor));
|
|
config = dev->actconfig;
|
|
if (err < 0) snd_printdd("error usb_get_descriptor: %d\n", err);
|
|
err = usb_reset_configuration(dev);
|
|
if (err < 0) snd_printdd("error usb_reset_configuration: %d\n", err);
|
|
snd_printdd("extigy_boot: new boot length = %d\n",
|
|
le16_to_cpu(get_cfg_desc(config)->wTotalLength));
|
|
return -ENODEV; /* quit this anyway */
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int snd_usb_audigy2nx_boot_quirk(struct usb_device *dev)
|
|
{
|
|
u8 buf = 1;
|
|
|
|
snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), 0x2a,
|
|
USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_OTHER,
|
|
0, 0, &buf, 1);
|
|
if (buf == 0) {
|
|
snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), 0x29,
|
|
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_OTHER,
|
|
1, 2000, NULL, 0);
|
|
return -ENODEV;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int snd_usb_fasttrackpro_boot_quirk(struct usb_device *dev)
|
|
{
|
|
int err;
|
|
|
|
if (dev->actconfig->desc.bConfigurationValue == 1) {
|
|
snd_printk(KERN_INFO "usb-audio: "
|
|
"Fast Track Pro switching to config #2\n");
|
|
/* This function has to be available by the usb core module.
|
|
* if it is not avialable the boot quirk has to be left out
|
|
* and the configuration has to be set by udev or hotplug
|
|
* rules
|
|
*/
|
|
err = usb_driver_set_configuration(dev, 2);
|
|
if (err < 0) {
|
|
snd_printdd("error usb_driver_set_configuration: %d\n",
|
|
err);
|
|
return -ENODEV;
|
|
}
|
|
} else
|
|
snd_printk(KERN_INFO "usb-audio: Fast Track Pro config OK\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* C-Media CM106/CM106+ have four 16-bit internal registers that are nicely
|
|
* documented in the device's data sheet.
|
|
*/
|
|
static int snd_usb_cm106_write_int_reg(struct usb_device *dev, int reg, u16 value)
|
|
{
|
|
u8 buf[4];
|
|
buf[0] = 0x20;
|
|
buf[1] = value & 0xff;
|
|
buf[2] = (value >> 8) & 0xff;
|
|
buf[3] = reg;
|
|
return snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), USB_REQ_SET_CONFIGURATION,
|
|
USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_ENDPOINT,
|
|
0, 0, &buf, 4);
|
|
}
|
|
|
|
static int snd_usb_cm106_boot_quirk(struct usb_device *dev)
|
|
{
|
|
/*
|
|
* Enable line-out driver mode, set headphone source to front
|
|
* channels, enable stereo mic.
|
|
*/
|
|
return snd_usb_cm106_write_int_reg(dev, 2, 0x8004);
|
|
}
|
|
|
|
/*
|
|
* C-Media CM6206 is based on CM106 with two additional
|
|
* registers that are not documented in the data sheet.
|
|
* Values here are chosen based on sniffing USB traffic
|
|
* under Windows.
|
|
*/
|
|
static int snd_usb_cm6206_boot_quirk(struct usb_device *dev)
|
|
{
|
|
int err = 0, reg;
|
|
int val[] = {0x2004, 0x3000, 0xf800, 0x143f, 0x0000, 0x3000};
|
|
|
|
for (reg = 0; reg < ARRAY_SIZE(val); reg++) {
|
|
err = snd_usb_cm106_write_int_reg(dev, reg, val[reg]);
|
|
if (err < 0)
|
|
return err;
|
|
}
|
|
|
|
return err;
|
|
}
|
|
|
|
/*
|
|
* This call will put the synth in "USB send" mode, i.e it will send MIDI
|
|
* messages through USB (this is disabled at startup). The synth will
|
|
* acknowledge by sending a sysex on endpoint 0x85 and by displaying a USB
|
|
* sign on its LCD. Values here are chosen based on sniffing USB traffic
|
|
* under Windows.
|
|
*/
|
|
static int snd_usb_accessmusic_boot_quirk(struct usb_device *dev)
|
|
{
|
|
int err, actual_length;
|
|
|
|
/* "midi send" enable */
|
|
static const u8 seq[] = { 0x4e, 0x73, 0x52, 0x01 };
|
|
|
|
void *buf = kmemdup(seq, ARRAY_SIZE(seq), GFP_KERNEL);
|
|
if (!buf)
|
|
return -ENOMEM;
|
|
err = usb_interrupt_msg(dev, usb_sndintpipe(dev, 0x05), buf,
|
|
ARRAY_SIZE(seq), &actual_length, 1000);
|
|
kfree(buf);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Some sound cards from Native Instruments are in fact compliant to the USB
|
|
* audio standard of version 2 and other approved USB standards, even though
|
|
* they come up as vendor-specific device when first connected.
|
|
*
|
|
* However, they can be told to come up with a new set of descriptors
|
|
* upon their next enumeration, and the interfaces announced by the new
|
|
* descriptors will then be handled by the kernel's class drivers. As the
|
|
* product ID will also change, no further checks are required.
|
|
*/
|
|
|
|
static int snd_usb_nativeinstruments_boot_quirk(struct usb_device *dev)
|
|
{
|
|
int ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
|
|
0xaf, USB_TYPE_VENDOR | USB_RECIP_DEVICE,
|
|
cpu_to_le16(1), 0, NULL, 0, 1000);
|
|
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
usb_reset_device(dev);
|
|
|
|
/* return -EAGAIN, so the creation of an audio interface for this
|
|
* temporary device is aborted. The device will reconnect with a
|
|
* new product ID */
|
|
return -EAGAIN;
|
|
}
|
|
|
|
static void mbox2_setup_48_24_magic(struct usb_device *dev)
|
|
{
|
|
u8 srate[3];
|
|
u8 temp[12];
|
|
|
|
/* Choose 48000Hz permanently */
|
|
srate[0] = 0x80;
|
|
srate[1] = 0xbb;
|
|
srate[2] = 0x00;
|
|
|
|
/* Send the magic! */
|
|
snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0),
|
|
0x01, 0x22, 0x0100, 0x0085, &temp, 0x0003);
|
|
snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
|
|
0x81, 0xa2, 0x0100, 0x0085, &srate, 0x0003);
|
|
snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
|
|
0x81, 0xa2, 0x0100, 0x0086, &srate, 0x0003);
|
|
snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
|
|
0x81, 0xa2, 0x0100, 0x0003, &srate, 0x0003);
|
|
return;
|
|
}
|
|
|
|
/* Digidesign Mbox 2 needs to load firmware onboard
|
|
* and driver must wait a few seconds for initialisation.
|
|
*/
|
|
|
|
#define MBOX2_FIRMWARE_SIZE 646
|
|
#define MBOX2_BOOT_LOADING 0x01 /* Hard coded into the device */
|
|
#define MBOX2_BOOT_READY 0x02 /* Hard coded into the device */
|
|
|
|
int snd_usb_mbox2_boot_quirk(struct usb_device *dev)
|
|
{
|
|
struct usb_host_config *config = dev->actconfig;
|
|
int err;
|
|
u8 bootresponse;
|
|
int fwsize;
|
|
int count;
|
|
|
|
fwsize = le16_to_cpu(get_cfg_desc(config)->wTotalLength);
|
|
|
|
if (fwsize != MBOX2_FIRMWARE_SIZE) {
|
|
snd_printk(KERN_ERR "usb-audio: Invalid firmware size=%d.\n", fwsize);
|
|
return -ENODEV;
|
|
}
|
|
|
|
snd_printd("usb-audio: Sending Digidesign Mbox 2 boot sequence...\n");
|
|
|
|
count = 0;
|
|
bootresponse = MBOX2_BOOT_LOADING;
|
|
while ((bootresponse == MBOX2_BOOT_LOADING) && (count < 10)) {
|
|
msleep(500); /* 0.5 second delay */
|
|
snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0),
|
|
/* Control magic - load onboard firmware */
|
|
0x85, 0xc0, 0x0001, 0x0000, &bootresponse, 0x0012);
|
|
if (bootresponse == MBOX2_BOOT_READY)
|
|
break;
|
|
snd_printd("usb-audio: device not ready, resending boot sequence...\n");
|
|
count++;
|
|
}
|
|
|
|
if (bootresponse != MBOX2_BOOT_READY) {
|
|
snd_printk(KERN_ERR "usb-audio: Unknown bootresponse=%d, or timed out, ignoring device.\n", bootresponse);
|
|
return -ENODEV;
|
|
}
|
|
|
|
snd_printdd("usb-audio: device initialised!\n");
|
|
|
|
err = usb_get_descriptor(dev, USB_DT_DEVICE, 0,
|
|
&dev->descriptor, sizeof(dev->descriptor));
|
|
config = dev->actconfig;
|
|
if (err < 0)
|
|
snd_printd("error usb_get_descriptor: %d\n", err);
|
|
|
|
err = usb_reset_configuration(dev);
|
|
if (err < 0)
|
|
snd_printd("error usb_reset_configuration: %d\n", err);
|
|
snd_printdd("mbox2_boot: new boot length = %d\n",
|
|
le16_to_cpu(get_cfg_desc(config)->wTotalLength));
|
|
|
|
mbox2_setup_48_24_magic(dev);
|
|
|
|
snd_printk(KERN_INFO "usb-audio: Digidesign Mbox 2: 24bit 48kHz");
|
|
|
|
return 0; /* Successful boot */
|
|
}
|
|
|
|
/*
|
|
* Setup quirks
|
|
*/
|
|
#define MAUDIO_SET 0x01 /* parse device_setup */
|
|
#define MAUDIO_SET_COMPATIBLE 0x80 /* use only "win-compatible" interfaces */
|
|
#define MAUDIO_SET_DTS 0x02 /* enable DTS Digital Output */
|
|
#define MAUDIO_SET_96K 0x04 /* 48-96KHz rate if set, 8-48KHz otherwise */
|
|
#define MAUDIO_SET_24B 0x08 /* 24bits sample if set, 16bits otherwise */
|
|
#define MAUDIO_SET_DI 0x10 /* enable Digital Input */
|
|
#define MAUDIO_SET_MASK 0x1f /* bit mask for setup value */
|
|
#define MAUDIO_SET_24B_48K_DI 0x19 /* 24bits+48KHz+Digital Input */
|
|
#define MAUDIO_SET_24B_48K_NOTDI 0x09 /* 24bits+48KHz+No Digital Input */
|
|
#define MAUDIO_SET_16B_48K_DI 0x11 /* 16bits+48KHz+Digital Input */
|
|
#define MAUDIO_SET_16B_48K_NOTDI 0x01 /* 16bits+48KHz+No Digital Input */
|
|
|
|
static int quattro_skip_setting_quirk(struct snd_usb_audio *chip,
|
|
int iface, int altno)
|
|
{
|
|
/* Reset ALL ifaces to 0 altsetting.
|
|
* Call it for every possible altsetting of every interface.
|
|
*/
|
|
usb_set_interface(chip->dev, iface, 0);
|
|
if (chip->setup & MAUDIO_SET) {
|
|
if (chip->setup & MAUDIO_SET_COMPATIBLE) {
|
|
if (iface != 1 && iface != 2)
|
|
return 1; /* skip all interfaces but 1 and 2 */
|
|
} else {
|
|
unsigned int mask;
|
|
if (iface == 1 || iface == 2)
|
|
return 1; /* skip interfaces 1 and 2 */
|
|
if ((chip->setup & MAUDIO_SET_96K) && altno != 1)
|
|
return 1; /* skip this altsetting */
|
|
mask = chip->setup & MAUDIO_SET_MASK;
|
|
if (mask == MAUDIO_SET_24B_48K_DI && altno != 2)
|
|
return 1; /* skip this altsetting */
|
|
if (mask == MAUDIO_SET_24B_48K_NOTDI && altno != 3)
|
|
return 1; /* skip this altsetting */
|
|
if (mask == MAUDIO_SET_16B_48K_NOTDI && altno != 4)
|
|
return 1; /* skip this altsetting */
|
|
}
|
|
}
|
|
snd_printdd(KERN_INFO
|
|
"using altsetting %d for interface %d config %d\n",
|
|
altno, iface, chip->setup);
|
|
return 0; /* keep this altsetting */
|
|
}
|
|
|
|
static int audiophile_skip_setting_quirk(struct snd_usb_audio *chip,
|
|
int iface,
|
|
int altno)
|
|
{
|
|
/* Reset ALL ifaces to 0 altsetting.
|
|
* Call it for every possible altsetting of every interface.
|
|
*/
|
|
usb_set_interface(chip->dev, iface, 0);
|
|
|
|
if (chip->setup & MAUDIO_SET) {
|
|
unsigned int mask;
|
|
if ((chip->setup & MAUDIO_SET_DTS) && altno != 6)
|
|
return 1; /* skip this altsetting */
|
|
if ((chip->setup & MAUDIO_SET_96K) && altno != 1)
|
|
return 1; /* skip this altsetting */
|
|
mask = chip->setup & MAUDIO_SET_MASK;
|
|
if (mask == MAUDIO_SET_24B_48K_DI && altno != 2)
|
|
return 1; /* skip this altsetting */
|
|
if (mask == MAUDIO_SET_24B_48K_NOTDI && altno != 3)
|
|
return 1; /* skip this altsetting */
|
|
if (mask == MAUDIO_SET_16B_48K_DI && altno != 4)
|
|
return 1; /* skip this altsetting */
|
|
if (mask == MAUDIO_SET_16B_48K_NOTDI && altno != 5)
|
|
return 1; /* skip this altsetting */
|
|
}
|
|
|
|
return 0; /* keep this altsetting */
|
|
}
|
|
|
|
|
|
static int fasttrackpro_skip_setting_quirk(struct snd_usb_audio *chip,
|
|
int iface, int altno)
|
|
{
|
|
/* Reset ALL ifaces to 0 altsetting.
|
|
* Call it for every possible altsetting of every interface.
|
|
*/
|
|
usb_set_interface(chip->dev, iface, 0);
|
|
|
|
/* possible configuration where both inputs and only one output is
|
|
*used is not supported by the current setup
|
|
*/
|
|
if (chip->setup & (MAUDIO_SET | MAUDIO_SET_24B)) {
|
|
if (chip->setup & MAUDIO_SET_96K) {
|
|
if (altno != 3 && altno != 6)
|
|
return 1;
|
|
} else if (chip->setup & MAUDIO_SET_DI) {
|
|
if (iface == 4)
|
|
return 1; /* no analog input */
|
|
if (altno != 2 && altno != 5)
|
|
return 1; /* enable only altsets 2 and 5 */
|
|
} else {
|
|
if (iface == 5)
|
|
return 1; /* disable digialt input */
|
|
if (altno != 2 && altno != 5)
|
|
return 1; /* enalbe only altsets 2 and 5 */
|
|
}
|
|
} else {
|
|
/* keep only 16-Bit mode */
|
|
if (altno != 1)
|
|
return 1;
|
|
}
|
|
|
|
snd_printdd(KERN_INFO
|
|
"using altsetting %d for interface %d config %d\n",
|
|
altno, iface, chip->setup);
|
|
return 0; /* keep this altsetting */
|
|
}
|
|
|
|
int snd_usb_apply_interface_quirk(struct snd_usb_audio *chip,
|
|
int iface,
|
|
int altno)
|
|
{
|
|
/* audiophile usb: skip altsets incompatible with device_setup */
|
|
if (chip->usb_id == USB_ID(0x0763, 0x2003))
|
|
return audiophile_skip_setting_quirk(chip, iface, altno);
|
|
/* quattro usb: skip altsets incompatible with device_setup */
|
|
if (chip->usb_id == USB_ID(0x0763, 0x2001))
|
|
return quattro_skip_setting_quirk(chip, iface, altno);
|
|
/* fasttrackpro usb: skip altsets incompatible with device_setup */
|
|
if (chip->usb_id == USB_ID(0x0763, 0x2012))
|
|
return fasttrackpro_skip_setting_quirk(chip, iface, altno);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int snd_usb_apply_boot_quirk(struct usb_device *dev,
|
|
struct usb_interface *intf,
|
|
const struct snd_usb_audio_quirk *quirk)
|
|
{
|
|
u32 id = USB_ID(le16_to_cpu(dev->descriptor.idVendor),
|
|
le16_to_cpu(dev->descriptor.idProduct));
|
|
|
|
switch (id) {
|
|
case USB_ID(0x041e, 0x3000):
|
|
/* SB Extigy needs special boot-up sequence */
|
|
/* if more models come, this will go to the quirk list. */
|
|
return snd_usb_extigy_boot_quirk(dev, intf);
|
|
|
|
case USB_ID(0x041e, 0x3020):
|
|
/* SB Audigy 2 NX needs its own boot-up magic, too */
|
|
return snd_usb_audigy2nx_boot_quirk(dev);
|
|
|
|
case USB_ID(0x10f5, 0x0200):
|
|
/* C-Media CM106 / Turtle Beach Audio Advantage Roadie */
|
|
return snd_usb_cm106_boot_quirk(dev);
|
|
|
|
case USB_ID(0x0d8c, 0x0102):
|
|
/* C-Media CM6206 / CM106-Like Sound Device */
|
|
case USB_ID(0x0ccd, 0x00b1): /* Terratec Aureon 7.1 USB */
|
|
return snd_usb_cm6206_boot_quirk(dev);
|
|
|
|
case USB_ID(0x0dba, 0x3000):
|
|
/* Digidesign Mbox 2 */
|
|
return snd_usb_mbox2_boot_quirk(dev);
|
|
|
|
case USB_ID(0x133e, 0x0815):
|
|
/* Access Music VirusTI Desktop */
|
|
return snd_usb_accessmusic_boot_quirk(dev);
|
|
|
|
case USB_ID(0x17cc, 0x1000): /* Komplete Audio 6 */
|
|
case USB_ID(0x17cc, 0x1010): /* Traktor Audio 6 */
|
|
case USB_ID(0x17cc, 0x1020): /* Traktor Audio 10 */
|
|
return snd_usb_nativeinstruments_boot_quirk(dev);
|
|
case USB_ID(0x0763, 0x2012): /* M-Audio Fast Track Pro USB */
|
|
return snd_usb_fasttrackpro_boot_quirk(dev);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* check if the device uses big-endian samples
|
|
*/
|
|
int snd_usb_is_big_endian_format(struct snd_usb_audio *chip, struct audioformat *fp)
|
|
{
|
|
/* it depends on altsetting wether the device is big-endian or not */
|
|
switch (chip->usb_id) {
|
|
case USB_ID(0x0763, 0x2001): /* M-Audio Quattro: captured data only */
|
|
if (fp->altsetting == 2 || fp->altsetting == 3 ||
|
|
fp->altsetting == 5 || fp->altsetting == 6)
|
|
return 1;
|
|
break;
|
|
case USB_ID(0x0763, 0x2003): /* M-Audio Audiophile USB */
|
|
if (chip->setup == 0x00 ||
|
|
fp->altsetting == 1 || fp->altsetting == 2 ||
|
|
fp->altsetting == 3)
|
|
return 1;
|
|
break;
|
|
case USB_ID(0x0763, 0x2012): /* M-Audio Fast Track Pro */
|
|
if (fp->altsetting == 2 || fp->altsetting == 3 ||
|
|
fp->altsetting == 5 || fp->altsetting == 6)
|
|
return 1;
|
|
break;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* For E-Mu 0404USB/0202USB/TrackerPre/0204 sample rate should be set for device,
|
|
* not for interface.
|
|
*/
|
|
|
|
enum {
|
|
EMU_QUIRK_SR_44100HZ = 0,
|
|
EMU_QUIRK_SR_48000HZ,
|
|
EMU_QUIRK_SR_88200HZ,
|
|
EMU_QUIRK_SR_96000HZ,
|
|
EMU_QUIRK_SR_176400HZ,
|
|
EMU_QUIRK_SR_192000HZ
|
|
};
|
|
|
|
static void set_format_emu_quirk(struct snd_usb_substream *subs,
|
|
struct audioformat *fmt)
|
|
{
|
|
unsigned char emu_samplerate_id = 0;
|
|
|
|
/* When capture is active
|
|
* sample rate shouldn't be changed
|
|
* by playback substream
|
|
*/
|
|
if (subs->direction == SNDRV_PCM_STREAM_PLAYBACK) {
|
|
if (subs->stream->substream[SNDRV_PCM_STREAM_CAPTURE].interface != -1)
|
|
return;
|
|
}
|
|
|
|
switch (fmt->rate_min) {
|
|
case 48000:
|
|
emu_samplerate_id = EMU_QUIRK_SR_48000HZ;
|
|
break;
|
|
case 88200:
|
|
emu_samplerate_id = EMU_QUIRK_SR_88200HZ;
|
|
break;
|
|
case 96000:
|
|
emu_samplerate_id = EMU_QUIRK_SR_96000HZ;
|
|
break;
|
|
case 176400:
|
|
emu_samplerate_id = EMU_QUIRK_SR_176400HZ;
|
|
break;
|
|
case 192000:
|
|
emu_samplerate_id = EMU_QUIRK_SR_192000HZ;
|
|
break;
|
|
default:
|
|
emu_samplerate_id = EMU_QUIRK_SR_44100HZ;
|
|
break;
|
|
}
|
|
snd_emuusb_set_samplerate(subs->stream->chip, emu_samplerate_id);
|
|
}
|
|
|
|
void snd_usb_set_format_quirk(struct snd_usb_substream *subs,
|
|
struct audioformat *fmt)
|
|
{
|
|
switch (subs->stream->chip->usb_id) {
|
|
case USB_ID(0x041e, 0x3f02): /* E-Mu 0202 USB */
|
|
case USB_ID(0x041e, 0x3f04): /* E-Mu 0404 USB */
|
|
case USB_ID(0x041e, 0x3f0a): /* E-Mu Tracker Pre */
|
|
case USB_ID(0x041e, 0x3f19): /* E-Mu 0204 USB */
|
|
set_format_emu_quirk(subs, fmt);
|
|
break;
|
|
}
|
|
}
|
|
|
|
void snd_usb_endpoint_start_quirk(struct snd_usb_endpoint *ep)
|
|
{
|
|
/*
|
|
* "Playback Design" products send bogus feedback data at the start
|
|
* of the stream. Ignore them.
|
|
*/
|
|
if ((le16_to_cpu(ep->chip->dev->descriptor.idVendor) == 0x23ba) &&
|
|
ep->type == SND_USB_ENDPOINT_TYPE_SYNC)
|
|
ep->skip_packets = 4;
|
|
}
|
|
|
|
void snd_usb_ctl_msg_quirk(struct usb_device *dev, unsigned int pipe,
|
|
__u8 request, __u8 requesttype, __u16 value,
|
|
__u16 index, void *data, __u16 size)
|
|
{
|
|
/*
|
|
* "Playback Design" products need a 20ms delay after each
|
|
* class compliant request
|
|
*/
|
|
if ((le16_to_cpu(dev->descriptor.idVendor) == 0x23ba) &&
|
|
(requesttype & USB_TYPE_MASK) == USB_TYPE_CLASS)
|
|
mdelay(20);
|
|
}
|
|
|