linux/arch/arm/mach-mvebu/Kconfig
Thomas Petazzoni cb49d86dbe ARM: mvebu: Use the ARMADA_370_XP_IRQ option
Now that there is a ARMADA_370_XP_IRQ option to enable the irqchip
driver for Armada 370, XP, 375, 38x and 39x, let's select this option
when needed. Note that this selection is currently not mandatory
because ARMADA_370_XP_IRQ is for now always enabled when ARCH_MVEBU=y,
but this is something that we will change in the future, and therefore
we should make the relevant platforms select ARMADA_370_XP_IRQ when
needed.

Due to this, selecting GENERIC_IRQ_CHIP is no longer needed.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Link: https://lkml.kernel.org/r/1455115621-22846-7-git-send-email-thomas.petazzoni@free-electrons.com
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2016-02-16 17:36:16 +00:00

133 lines
3.1 KiB
Plaintext

menuconfig ARCH_MVEBU
bool "Marvell Engineering Business Unit (MVEBU) SoCs"
depends on ARCH_MULTI_V7 || ARCH_MULTI_V5
select ARCH_SUPPORTS_BIG_ENDIAN
select CLKSRC_MMIO
select PINCTRL
select PLAT_ORION
select SOC_BUS
select MVEBU_MBUS
select ZONE_DMA if ARM_LPAE
select ARCH_REQUIRE_GPIOLIB
select PCI_QUIRKS if PCI
select OF_ADDRESS_PCI
if ARCH_MVEBU
config MACH_MVEBU_ANY
bool
config MACH_MVEBU_V7
bool
select ARMADA_370_XP_TIMER
select CACHE_L2X0
select ARM_CPU_SUSPEND
select MACH_MVEBU_ANY
config MACH_ARMADA_370
bool "Marvell Armada 370 boards"
depends on ARCH_MULTI_V7
select ARMADA_370_CLK
select ARMADA_370_XP_IRQ
select CPU_PJ4B
select MACH_MVEBU_V7
select PINCTRL_ARMADA_370
help
Say 'Y' here if you want your kernel to support boards based
on the Marvell Armada 370 SoC with device tree.
config MACH_ARMADA_375
bool "Marvell Armada 375 boards"
depends on ARCH_MULTI_V7
select ARMADA_370_XP_IRQ
select ARM_ERRATA_720789
select ARM_ERRATA_753970
select ARM_GIC
select ARMADA_375_CLK
select HAVE_ARM_SCU
select HAVE_ARM_TWD if SMP
select HAVE_SMP
select MACH_MVEBU_V7
select PINCTRL_ARMADA_375
help
Say 'Y' here if you want your kernel to support boards based
on the Marvell Armada 375 SoC with device tree.
config MACH_ARMADA_38X
bool "Marvell Armada 380/385 boards"
depends on ARCH_MULTI_V7
select ARM_ERRATA_720789
select ARM_ERRATA_753970
select ARM_GIC
select ARMADA_370_XP_IRQ
select ARMADA_38X_CLK
select HAVE_ARM_SCU
select HAVE_ARM_TWD if SMP
select HAVE_SMP
select MACH_MVEBU_V7
select PINCTRL_ARMADA_38X
help
Say 'Y' here if you want your kernel to support boards based
on the Marvell Armada 380/385 SoC with device tree.
config MACH_ARMADA_39X
bool "Marvell Armada 39x boards"
depends on ARCH_MULTI_V7
select ARM_GIC
select ARMADA_370_XP_IRQ
select ARMADA_39X_CLK
select CACHE_L2X0
select HAVE_ARM_SCU
select HAVE_ARM_TWD if SMP
select HAVE_SMP
select MACH_MVEBU_V7
select PINCTRL_ARMADA_39X
help
Say 'Y' here if you want your kernel to support boards based
on the Marvell Armada 39x SoC with device tree.
config MACH_ARMADA_XP
bool "Marvell Armada XP boards"
depends on ARCH_MULTI_V7
select ARMADA_370_XP_IRQ
select ARMADA_XP_CLK
select CPU_PJ4B
select MACH_MVEBU_V7
select PINCTRL_ARMADA_XP
help
Say 'Y' here if you want your kernel to support boards based
on the Marvell Armada XP SoC with device tree.
config MACH_DOVE
bool "Marvell Dove boards"
depends on ARCH_MULTI_V7
select CACHE_L2X0
select CPU_PJ4
select DOVE_CLK
select MACH_MVEBU_ANY
select ORION_IRQCHIP
select ORION_TIMER
select PM_GENERIC_DOMAINS if PM
select PINCTRL_DOVE
help
Say 'Y' here if you want your kernel to support the
Marvell Dove using flattened device tree.
config MACH_KIRKWOOD
bool "Marvell Kirkwood boards"
depends on ARCH_MULTI_V5
select ARCH_REQUIRE_GPIOLIB
select CPU_FEROCEON
select KIRKWOOD_CLK
select MACH_MVEBU_ANY
select ORION_IRQCHIP
select ORION_TIMER
select PCI
select PCI_QUIRKS
select PINCTRL_KIRKWOOD
help
Say 'Y' here if you want your kernel to support boards based
on the Marvell Kirkwood device tree.
endif