mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-14 06:24:53 +08:00
8e2b04b019
On some i.MX6 SoCs (like i.MX6SL, i.MX6SX and i.MX6UL) that do not have speed grading check, opp table will not be created in platform code, so cpufreq driver prints the following error message: cpu cpu0: dev_pm_opp_get_opp_count: OPP table not found (-19) However, this is not really an error in this case because the imx6q-cpufreq driver first calls dev_pm_opp_get_opp_count() and if it fails, it means that platform code does not provide OPP and then dev_pm_opp_of_add_table() will be called. In order to avoid such confusing error message, move the speed grading check from platform code to the imx6q-cpufreq driver. This way the imx6q-cpufreq no longer has to check whether OPP table is supplied by platform code. Tested on a i.MX6Q and i.MX6UL based boards. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
338 lines
8.4 KiB
C
338 lines
8.4 KiB
C
/*
|
|
* Copyright 2011-2013 Freescale Semiconductor, Inc.
|
|
* Copyright 2011 Linaro Ltd.
|
|
*
|
|
* The code contained herein is licensed under the GNU General Public
|
|
* License. You may obtain a copy of the GNU General Public License
|
|
* Version 2 or later at the following locations:
|
|
*
|
|
* http://www.opensource.org/licenses/gpl-license.html
|
|
* http://www.gnu.org/copyleft/gpl.html
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/clkdev.h>
|
|
#include <linux/cpu.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/export.h>
|
|
#include <linux/init.h>
|
|
#include <linux/io.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/irqchip.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/of_irq.h>
|
|
#include <linux/of_platform.h>
|
|
#include <linux/pm_opp.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/phy.h>
|
|
#include <linux/reboot.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/micrel_phy.h>
|
|
#include <linux/mfd/syscon.h>
|
|
#include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>
|
|
#include <asm/mach/arch.h>
|
|
#include <asm/mach/map.h>
|
|
#include <asm/system_misc.h>
|
|
|
|
#include "common.h"
|
|
#include "cpuidle.h"
|
|
#include "hardware.h"
|
|
|
|
/* For imx6q sabrelite board: set KSZ9021RN RGMII pad skew */
|
|
static int ksz9021rn_phy_fixup(struct phy_device *phydev)
|
|
{
|
|
if (IS_BUILTIN(CONFIG_PHYLIB)) {
|
|
/* min rx data delay */
|
|
phy_write(phydev, MICREL_KSZ9021_EXTREG_CTRL,
|
|
0x8000 | MICREL_KSZ9021_RGMII_RX_DATA_PAD_SCEW);
|
|
phy_write(phydev, MICREL_KSZ9021_EXTREG_DATA_WRITE, 0x0000);
|
|
|
|
/* max rx/tx clock delay, min rx/tx control delay */
|
|
phy_write(phydev, MICREL_KSZ9021_EXTREG_CTRL,
|
|
0x8000 | MICREL_KSZ9021_RGMII_CLK_CTRL_PAD_SCEW);
|
|
phy_write(phydev, MICREL_KSZ9021_EXTREG_DATA_WRITE, 0xf0f0);
|
|
phy_write(phydev, MICREL_KSZ9021_EXTREG_CTRL,
|
|
MICREL_KSZ9021_RGMII_CLK_CTRL_PAD_SCEW);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void mmd_write_reg(struct phy_device *dev, int device, int reg, int val)
|
|
{
|
|
phy_write(dev, 0x0d, device);
|
|
phy_write(dev, 0x0e, reg);
|
|
phy_write(dev, 0x0d, (1 << 14) | device);
|
|
phy_write(dev, 0x0e, val);
|
|
}
|
|
|
|
static int ksz9031rn_phy_fixup(struct phy_device *dev)
|
|
{
|
|
/*
|
|
* min rx data delay, max rx/tx clock delay,
|
|
* min rx/tx control delay
|
|
*/
|
|
mmd_write_reg(dev, 2, 4, 0);
|
|
mmd_write_reg(dev, 2, 5, 0);
|
|
mmd_write_reg(dev, 2, 8, 0x003ff);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* fixup for PLX PEX8909 bridge to configure GPIO1-7 as output High
|
|
* as they are used for slots1-7 PERST#
|
|
*/
|
|
static void ventana_pciesw_early_fixup(struct pci_dev *dev)
|
|
{
|
|
u32 dw;
|
|
|
|
if (!of_machine_is_compatible("gw,ventana"))
|
|
return;
|
|
|
|
if (dev->devfn != 0)
|
|
return;
|
|
|
|
pci_read_config_dword(dev, 0x62c, &dw);
|
|
dw |= 0xaaa8; // GPIO1-7 outputs
|
|
pci_write_config_dword(dev, 0x62c, dw);
|
|
|
|
pci_read_config_dword(dev, 0x644, &dw);
|
|
dw |= 0xfe; // GPIO1-7 output high
|
|
pci_write_config_dword(dev, 0x644, dw);
|
|
|
|
msleep(100);
|
|
}
|
|
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_PLX, 0x8609, ventana_pciesw_early_fixup);
|
|
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_PLX, 0x8606, ventana_pciesw_early_fixup);
|
|
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_PLX, 0x8604, ventana_pciesw_early_fixup);
|
|
|
|
static int ar8031_phy_fixup(struct phy_device *dev)
|
|
{
|
|
u16 val;
|
|
|
|
/* To enable AR8031 output a 125MHz clk from CLK_25M */
|
|
phy_write(dev, 0xd, 0x7);
|
|
phy_write(dev, 0xe, 0x8016);
|
|
phy_write(dev, 0xd, 0x4007);
|
|
|
|
val = phy_read(dev, 0xe);
|
|
val &= 0xffe3;
|
|
val |= 0x18;
|
|
phy_write(dev, 0xe, val);
|
|
|
|
/* introduce tx clock delay */
|
|
phy_write(dev, 0x1d, 0x5);
|
|
val = phy_read(dev, 0x1e);
|
|
val |= 0x0100;
|
|
phy_write(dev, 0x1e, val);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#define PHY_ID_AR8031 0x004dd074
|
|
|
|
static int ar8035_phy_fixup(struct phy_device *dev)
|
|
{
|
|
u16 val;
|
|
|
|
/* Ar803x phy SmartEEE feature cause link status generates glitch,
|
|
* which cause ethernet link down/up issue, so disable SmartEEE
|
|
*/
|
|
phy_write(dev, 0xd, 0x3);
|
|
phy_write(dev, 0xe, 0x805d);
|
|
phy_write(dev, 0xd, 0x4003);
|
|
|
|
val = phy_read(dev, 0xe);
|
|
phy_write(dev, 0xe, val & ~(1 << 8));
|
|
|
|
/*
|
|
* Enable 125MHz clock from CLK_25M on the AR8031. This
|
|
* is fed in to the IMX6 on the ENET_REF_CLK (V22) pad.
|
|
* Also, introduce a tx clock delay.
|
|
*
|
|
* This is the same as is the AR8031 fixup.
|
|
*/
|
|
ar8031_phy_fixup(dev);
|
|
|
|
/*check phy power*/
|
|
val = phy_read(dev, 0x0);
|
|
if (val & BMCR_PDOWN)
|
|
phy_write(dev, 0x0, val & ~BMCR_PDOWN);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#define PHY_ID_AR8035 0x004dd072
|
|
|
|
static void __init imx6q_enet_phy_init(void)
|
|
{
|
|
if (IS_BUILTIN(CONFIG_PHYLIB)) {
|
|
phy_register_fixup_for_uid(PHY_ID_KSZ9021, MICREL_PHY_ID_MASK,
|
|
ksz9021rn_phy_fixup);
|
|
phy_register_fixup_for_uid(PHY_ID_KSZ9031, MICREL_PHY_ID_MASK,
|
|
ksz9031rn_phy_fixup);
|
|
phy_register_fixup_for_uid(PHY_ID_AR8031, 0xffffffef,
|
|
ar8031_phy_fixup);
|
|
phy_register_fixup_for_uid(PHY_ID_AR8035, 0xffffffef,
|
|
ar8035_phy_fixup);
|
|
}
|
|
}
|
|
|
|
static void __init imx6q_1588_init(void)
|
|
{
|
|
struct device_node *np;
|
|
struct clk *ptp_clk;
|
|
struct clk *enet_ref;
|
|
struct regmap *gpr;
|
|
u32 clksel;
|
|
|
|
np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-fec");
|
|
if (!np) {
|
|
pr_warn("%s: failed to find fec node\n", __func__);
|
|
return;
|
|
}
|
|
|
|
ptp_clk = of_clk_get(np, 2);
|
|
if (IS_ERR(ptp_clk)) {
|
|
pr_warn("%s: failed to get ptp clock\n", __func__);
|
|
goto put_node;
|
|
}
|
|
|
|
enet_ref = clk_get_sys(NULL, "enet_ref");
|
|
if (IS_ERR(enet_ref)) {
|
|
pr_warn("%s: failed to get enet clock\n", __func__);
|
|
goto put_ptp_clk;
|
|
}
|
|
|
|
/*
|
|
* If enet_ref from ANATOP/CCM is the PTP clock source, we need to
|
|
* set bit IOMUXC_GPR1[21]. Or the PTP clock must be from pad
|
|
* (external OSC), and we need to clear the bit.
|
|
*/
|
|
clksel = clk_is_match(ptp_clk, enet_ref) ?
|
|
IMX6Q_GPR1_ENET_CLK_SEL_ANATOP :
|
|
IMX6Q_GPR1_ENET_CLK_SEL_PAD;
|
|
gpr = syscon_regmap_lookup_by_compatible("fsl,imx6q-iomuxc-gpr");
|
|
if (!IS_ERR(gpr))
|
|
regmap_update_bits(gpr, IOMUXC_GPR1,
|
|
IMX6Q_GPR1_ENET_CLK_SEL_MASK,
|
|
clksel);
|
|
else
|
|
pr_err("failed to find fsl,imx6q-iomuxc-gpr regmap\n");
|
|
|
|
clk_put(enet_ref);
|
|
put_ptp_clk:
|
|
clk_put(ptp_clk);
|
|
put_node:
|
|
of_node_put(np);
|
|
}
|
|
|
|
static void __init imx6q_axi_init(void)
|
|
{
|
|
struct regmap *gpr;
|
|
unsigned int mask;
|
|
|
|
gpr = syscon_regmap_lookup_by_compatible("fsl,imx6q-iomuxc-gpr");
|
|
if (!IS_ERR(gpr)) {
|
|
/*
|
|
* Enable the cacheable attribute of VPU and IPU
|
|
* AXI transactions.
|
|
*/
|
|
mask = IMX6Q_GPR4_VPU_WR_CACHE_SEL |
|
|
IMX6Q_GPR4_VPU_RD_CACHE_SEL |
|
|
IMX6Q_GPR4_VPU_P_WR_CACHE_VAL |
|
|
IMX6Q_GPR4_VPU_P_RD_CACHE_VAL_MASK |
|
|
IMX6Q_GPR4_IPU_WR_CACHE_CTL |
|
|
IMX6Q_GPR4_IPU_RD_CACHE_CTL;
|
|
regmap_update_bits(gpr, IOMUXC_GPR4, mask, mask);
|
|
|
|
/* Increase IPU read QoS priority */
|
|
regmap_update_bits(gpr, IOMUXC_GPR6,
|
|
IMX6Q_GPR6_IPU1_ID00_RD_QOS_MASK |
|
|
IMX6Q_GPR6_IPU1_ID01_RD_QOS_MASK,
|
|
(0xf << 16) | (0x7 << 20));
|
|
regmap_update_bits(gpr, IOMUXC_GPR7,
|
|
IMX6Q_GPR7_IPU2_ID00_RD_QOS_MASK |
|
|
IMX6Q_GPR7_IPU2_ID01_RD_QOS_MASK,
|
|
(0xf << 16) | (0x7 << 20));
|
|
} else {
|
|
pr_warn("failed to find fsl,imx6q-iomuxc-gpr regmap\n");
|
|
}
|
|
}
|
|
|
|
static void __init imx6q_init_machine(void)
|
|
{
|
|
struct device *parent;
|
|
|
|
if (cpu_is_imx6q() && imx_get_soc_revision() == IMX_CHIP_REVISION_2_0)
|
|
imx_print_silicon_rev("i.MX6QP", IMX_CHIP_REVISION_1_0);
|
|
else
|
|
imx_print_silicon_rev(cpu_is_imx6dl() ? "i.MX6DL" : "i.MX6Q",
|
|
imx_get_soc_revision());
|
|
|
|
parent = imx_soc_device_init();
|
|
if (parent == NULL)
|
|
pr_warn("failed to initialize soc device\n");
|
|
|
|
imx6q_enet_phy_init();
|
|
|
|
of_platform_default_populate(NULL, NULL, parent);
|
|
|
|
imx_anatop_init();
|
|
cpu_is_imx6q() ? imx6q_pm_init() : imx6dl_pm_init();
|
|
imx6q_1588_init();
|
|
imx6q_axi_init();
|
|
}
|
|
|
|
static void __init imx6q_init_late(void)
|
|
{
|
|
/*
|
|
* WAIT mode is broken on imx6 Dual/Quad revision 1.0 and 1.1 so
|
|
* there is no point to run cpuidle on them.
|
|
*
|
|
* It does work on imx6 Solo/DualLite starting from 1.1
|
|
*/
|
|
if ((cpu_is_imx6q() && imx_get_soc_revision() > IMX_CHIP_REVISION_1_1) ||
|
|
(cpu_is_imx6dl() && imx_get_soc_revision() > IMX_CHIP_REVISION_1_0))
|
|
imx6q_cpuidle_init();
|
|
|
|
if (IS_ENABLED(CONFIG_ARM_IMX6Q_CPUFREQ))
|
|
platform_device_register_simple("imx6q-cpufreq", -1, NULL, 0);
|
|
}
|
|
|
|
static void __init imx6q_map_io(void)
|
|
{
|
|
debug_ll_io_init();
|
|
imx_scu_map_io();
|
|
}
|
|
|
|
static void __init imx6q_init_irq(void)
|
|
{
|
|
imx_gpc_check_dt();
|
|
imx_init_revision_from_anatop();
|
|
imx_init_l2cache();
|
|
imx_src_init();
|
|
irqchip_init();
|
|
imx6_pm_ccm_init("fsl,imx6q-ccm");
|
|
}
|
|
|
|
static const char * const imx6q_dt_compat[] __initconst = {
|
|
"fsl,imx6dl",
|
|
"fsl,imx6q",
|
|
"fsl,imx6qp",
|
|
NULL,
|
|
};
|
|
|
|
DT_MACHINE_START(IMX6Q, "Freescale i.MX6 Quad/DualLite (Device Tree)")
|
|
.l2c_aux_val = 0,
|
|
.l2c_aux_mask = ~0,
|
|
.smp = smp_ops(imx_smp_ops),
|
|
.map_io = imx6q_map_io,
|
|
.init_irq = imx6q_init_irq,
|
|
.init_machine = imx6q_init_machine,
|
|
.init_late = imx6q_init_late,
|
|
.dt_compat = imx6q_dt_compat,
|
|
MACHINE_END
|