mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-23 19:14:30 +08:00
6e4a2a83f9
Fix a NULL pointer dereference after unbinding the driver, if channel resources were not yet allocated (no call to pl330_alloc_chan_resources()): $ echo 12850000.mdma > /sys/bus/amba/drivers/dma-pl330/unbind [ 13.606533] DMA pl330_control: removing pch: eeab6800, chan: eeab6814, thread: (null) [ 13.614472] Unable to handle kernel NULL pointer dereference at virtual address 0000000c [ 13.622537] pgd = ee284000 [ 13.625228] [0000000c] *pgd=6e1e4831, *pte=00000000, *ppte=00000000 [ 13.631482] Internal error: Oops: 17 [#1] PREEMPT SMP ARM [ 13.636859] Modules linked in: [ 13.639903] CPU: 0 PID: 1 Comm: sh Not tainted 3.17.0-rc3-next-20140904-00004-g7020ffc33ca3-dirty #420 [ 13.649187] task: ee80a800 ti: ee888000 task.ti: ee888000 [ 13.654589] PC is at _stop+0x8/0x2c8 [ 13.658131] LR is at pl330_control+0x70/0x2e8 [ 13.662468] pc : [<c0206028>] lr : [<c020649c>] psr: 60000093 [ 13.662468] sp : ee889e58 ip : 00000001 fp : 000bab70 [ 13.673922] r10: eeab6814 r9 : ee16debc r8 : 00000000 [ 13.679131] r7 : eeab685c r6 : 60000013 r5 : ee16de10 r4 : eeab6800 [ 13.685641] r3 : 00000002 r2 : 00000000 r1 : 00010000 r0 : 00000000 [ 13.692153] Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user [ 13.699357] Control: 10c5387d Table: 6e28404a DAC: 00000015 [ 13.705085] Process sh (pid: 1, stack limit = 0xee888240) [ 13.710466] Stack: (0xee889e58 to 0xee88a000) [ 13.714808] 9e40: 00000002 eeab6800 [ 13.722969] 9e60: ee16de10 eeab6800 ee16de10 60000013 eeab685c c020649c 00000000 c040280c [ 13.731128] 9e80: ee889e80 ee889e80 ee16de18 ee16de10 eeab6880 eeab6814 00200200 eeab68a8 [ 13.739287] 9ea0: 00100100 c0208048 00000000 c0409fc4 eea80800 eea808f8 c0605c440000000e
[ 13.747446] 9ec0:0000000e
eeb3960c eeb39600 c0203c48 eea80800 c0605c44 c0605a8c c023f694 [ 13.755605] 9ee0: ee80a800 eea80834 eea80800 c023f704 ee80a800 eea80800 c0605c44 c023e8ec [ 13.763764] 9f00:0000000e
ee149780 ee29e580 ee889f80 ee29e580 c023e19c0000000e
c01167e4 [ 13.771923] 9f20: c01167a0 00000000 00000000 c0115e88 00000000 00000000 ee0b1a000000000e
[ 13.780082] 9f40: b6f48000 ee889f800000000e
ee888000 b6f48000 c00bfadc 00000000 00000003 [ 13.788241] 9f60: 00000000 00000000 00000000 ee0b1a00 ee0b1a000000000e
b6f48000 c00bfdf4 [ 13.796401] 9f80: 00000000 00000000 ffffffff0000000e
b6f48000 b6edc5d0 00000004 c000e7a4 [ 13.804560] 9fa0: 00000000 c000e6200000000e
b6f48000 00000001 b6f480000000000e
00000000 [ 13.812719] 9fc0:0000000e
b6f48000 b6edc5d0 000000040000000e
b6f4c8c0 000c3470 000bab70 [ 13.820879] 9fe0: 00000000 bed2aa50 b6e18bdc b6e6b52c 60000010 00000001 c0c0c0c0 c0c0c0c0 [ 13.829058] [<c0206028>] (_stop) from [<c020649c>] (pl330_control+0x70/0x2e8) [ 13.836165] [<c020649c>] (pl330_control) from [<c0208048>] (pl330_remove+0xb0/0xdc) [ 13.843800] [<c0208048>] (pl330_remove) from [<c0203c48>] (amba_remove+0x24/0xc0) [ 13.851272] [<c0203c48>] (amba_remove) from [<c023f694>] (__device_release_driver+0x70/0xc4) [ 13.859685] [<c023f694>] (__device_release_driver) from [<c023f704>] (device_release_driver+0x1c/0x28) [ 13.868971] [<c023f704>] (device_release_driver) from [<c023e8ec>] (unbind_store+0x58/0x90) [ 13.877303] [<c023e8ec>] (unbind_store) from [<c023e19c>] (drv_attr_store+0x20/0x2c) [ 13.885036] [<c023e19c>] (drv_attr_store) from [<c01167e4>] (sysfs_kf_write+0x44/0x48) [ 13.892928] [<c01167e4>] (sysfs_kf_write) from [<c0115e88>] (kernfs_fop_write+0xc0/0x17c) [ 13.901090] [<c0115e88>] (kernfs_fop_write) from [<c00bfadc>] (vfs_write+0xa0/0x1a8) [ 13.908812] [<c00bfadc>] (vfs_write) from [<c00bfdf4>] (SyS_write+0x40/0x8c) [ 13.915850] [<c00bfdf4>] (SyS_write) from [<c000e620>] (ret_fast_syscall+0x0/0x30) [ 13.923392] Code: e5813010 e12fff1e e92d40f0 e24dd00c (e590200c) [ 13.929467] ---[ end trace 10064e15a5929cf8 ]--- Terminate the thread and free channel resource only if channel resources were allocated (thread is not NULL). Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Cc: <stable@vger.kernel.org> Fixes:b3040e4067
("DMA: PL330: Add dma api driver") Reviewed-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2816 lines
62 KiB
C
2816 lines
62 KiB
C
/*
|
|
* Copyright (c) 2012 Samsung Electronics Co., Ltd.
|
|
* http://www.samsung.com
|
|
*
|
|
* Copyright (C) 2010 Samsung Electronics Co. Ltd.
|
|
* Jaswinder Singh <jassi.brar@samsung.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/io.h>
|
|
#include <linux/init.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/module.h>
|
|
#include <linux/string.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/dmaengine.h>
|
|
#include <linux/amba/bus.h>
|
|
#include <linux/amba/pl330.h>
|
|
#include <linux/scatterlist.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_dma.h>
|
|
#include <linux/err.h>
|
|
|
|
#include "dmaengine.h"
|
|
#define PL330_MAX_CHAN 8
|
|
#define PL330_MAX_IRQS 32
|
|
#define PL330_MAX_PERI 32
|
|
|
|
enum pl330_cachectrl {
|
|
CCTRL0, /* Noncacheable and nonbufferable */
|
|
CCTRL1, /* Bufferable only */
|
|
CCTRL2, /* Cacheable, but do not allocate */
|
|
CCTRL3, /* Cacheable and bufferable, but do not allocate */
|
|
INVALID1, /* AWCACHE = 0x1000 */
|
|
INVALID2,
|
|
CCTRL6, /* Cacheable write-through, allocate on writes only */
|
|
CCTRL7, /* Cacheable write-back, allocate on writes only */
|
|
};
|
|
|
|
enum pl330_byteswap {
|
|
SWAP_NO,
|
|
SWAP_2,
|
|
SWAP_4,
|
|
SWAP_8,
|
|
SWAP_16,
|
|
};
|
|
|
|
/* Register and Bit field Definitions */
|
|
#define DS 0x0
|
|
#define DS_ST_STOP 0x0
|
|
#define DS_ST_EXEC 0x1
|
|
#define DS_ST_CMISS 0x2
|
|
#define DS_ST_UPDTPC 0x3
|
|
#define DS_ST_WFE 0x4
|
|
#define DS_ST_ATBRR 0x5
|
|
#define DS_ST_QBUSY 0x6
|
|
#define DS_ST_WFP 0x7
|
|
#define DS_ST_KILL 0x8
|
|
#define DS_ST_CMPLT 0x9
|
|
#define DS_ST_FLTCMP 0xe
|
|
#define DS_ST_FAULT 0xf
|
|
|
|
#define DPC 0x4
|
|
#define INTEN 0x20
|
|
#define ES 0x24
|
|
#define INTSTATUS 0x28
|
|
#define INTCLR 0x2c
|
|
#define FSM 0x30
|
|
#define FSC 0x34
|
|
#define FTM 0x38
|
|
|
|
#define _FTC 0x40
|
|
#define FTC(n) (_FTC + (n)*0x4)
|
|
|
|
#define _CS 0x100
|
|
#define CS(n) (_CS + (n)*0x8)
|
|
#define CS_CNS (1 << 21)
|
|
|
|
#define _CPC 0x104
|
|
#define CPC(n) (_CPC + (n)*0x8)
|
|
|
|
#define _SA 0x400
|
|
#define SA(n) (_SA + (n)*0x20)
|
|
|
|
#define _DA 0x404
|
|
#define DA(n) (_DA + (n)*0x20)
|
|
|
|
#define _CC 0x408
|
|
#define CC(n) (_CC + (n)*0x20)
|
|
|
|
#define CC_SRCINC (1 << 0)
|
|
#define CC_DSTINC (1 << 14)
|
|
#define CC_SRCPRI (1 << 8)
|
|
#define CC_DSTPRI (1 << 22)
|
|
#define CC_SRCNS (1 << 9)
|
|
#define CC_DSTNS (1 << 23)
|
|
#define CC_SRCIA (1 << 10)
|
|
#define CC_DSTIA (1 << 24)
|
|
#define CC_SRCBRSTLEN_SHFT 4
|
|
#define CC_DSTBRSTLEN_SHFT 18
|
|
#define CC_SRCBRSTSIZE_SHFT 1
|
|
#define CC_DSTBRSTSIZE_SHFT 15
|
|
#define CC_SRCCCTRL_SHFT 11
|
|
#define CC_SRCCCTRL_MASK 0x7
|
|
#define CC_DSTCCTRL_SHFT 25
|
|
#define CC_DRCCCTRL_MASK 0x7
|
|
#define CC_SWAP_SHFT 28
|
|
|
|
#define _LC0 0x40c
|
|
#define LC0(n) (_LC0 + (n)*0x20)
|
|
|
|
#define _LC1 0x410
|
|
#define LC1(n) (_LC1 + (n)*0x20)
|
|
|
|
#define DBGSTATUS 0xd00
|
|
#define DBG_BUSY (1 << 0)
|
|
|
|
#define DBGCMD 0xd04
|
|
#define DBGINST0 0xd08
|
|
#define DBGINST1 0xd0c
|
|
|
|
#define CR0 0xe00
|
|
#define CR1 0xe04
|
|
#define CR2 0xe08
|
|
#define CR3 0xe0c
|
|
#define CR4 0xe10
|
|
#define CRD 0xe14
|
|
|
|
#define PERIPH_ID 0xfe0
|
|
#define PERIPH_REV_SHIFT 20
|
|
#define PERIPH_REV_MASK 0xf
|
|
#define PERIPH_REV_R0P0 0
|
|
#define PERIPH_REV_R1P0 1
|
|
#define PERIPH_REV_R1P1 2
|
|
|
|
#define CR0_PERIPH_REQ_SET (1 << 0)
|
|
#define CR0_BOOT_EN_SET (1 << 1)
|
|
#define CR0_BOOT_MAN_NS (1 << 2)
|
|
#define CR0_NUM_CHANS_SHIFT 4
|
|
#define CR0_NUM_CHANS_MASK 0x7
|
|
#define CR0_NUM_PERIPH_SHIFT 12
|
|
#define CR0_NUM_PERIPH_MASK 0x1f
|
|
#define CR0_NUM_EVENTS_SHIFT 17
|
|
#define CR0_NUM_EVENTS_MASK 0x1f
|
|
|
|
#define CR1_ICACHE_LEN_SHIFT 0
|
|
#define CR1_ICACHE_LEN_MASK 0x7
|
|
#define CR1_NUM_ICACHELINES_SHIFT 4
|
|
#define CR1_NUM_ICACHELINES_MASK 0xf
|
|
|
|
#define CRD_DATA_WIDTH_SHIFT 0
|
|
#define CRD_DATA_WIDTH_MASK 0x7
|
|
#define CRD_WR_CAP_SHIFT 4
|
|
#define CRD_WR_CAP_MASK 0x7
|
|
#define CRD_WR_Q_DEP_SHIFT 8
|
|
#define CRD_WR_Q_DEP_MASK 0xf
|
|
#define CRD_RD_CAP_SHIFT 12
|
|
#define CRD_RD_CAP_MASK 0x7
|
|
#define CRD_RD_Q_DEP_SHIFT 16
|
|
#define CRD_RD_Q_DEP_MASK 0xf
|
|
#define CRD_DATA_BUFF_SHIFT 20
|
|
#define CRD_DATA_BUFF_MASK 0x3ff
|
|
|
|
#define PART 0x330
|
|
#define DESIGNER 0x41
|
|
#define REVISION 0x0
|
|
#define INTEG_CFG 0x0
|
|
#define PERIPH_ID_VAL ((PART << 0) | (DESIGNER << 12))
|
|
|
|
#define PL330_STATE_STOPPED (1 << 0)
|
|
#define PL330_STATE_EXECUTING (1 << 1)
|
|
#define PL330_STATE_WFE (1 << 2)
|
|
#define PL330_STATE_FAULTING (1 << 3)
|
|
#define PL330_STATE_COMPLETING (1 << 4)
|
|
#define PL330_STATE_WFP (1 << 5)
|
|
#define PL330_STATE_KILLING (1 << 6)
|
|
#define PL330_STATE_FAULT_COMPLETING (1 << 7)
|
|
#define PL330_STATE_CACHEMISS (1 << 8)
|
|
#define PL330_STATE_UPDTPC (1 << 9)
|
|
#define PL330_STATE_ATBARRIER (1 << 10)
|
|
#define PL330_STATE_QUEUEBUSY (1 << 11)
|
|
#define PL330_STATE_INVALID (1 << 15)
|
|
|
|
#define PL330_STABLE_STATES (PL330_STATE_STOPPED | PL330_STATE_EXECUTING \
|
|
| PL330_STATE_WFE | PL330_STATE_FAULTING)
|
|
|
|
#define CMD_DMAADDH 0x54
|
|
#define CMD_DMAEND 0x00
|
|
#define CMD_DMAFLUSHP 0x35
|
|
#define CMD_DMAGO 0xa0
|
|
#define CMD_DMALD 0x04
|
|
#define CMD_DMALDP 0x25
|
|
#define CMD_DMALP 0x20
|
|
#define CMD_DMALPEND 0x28
|
|
#define CMD_DMAKILL 0x01
|
|
#define CMD_DMAMOV 0xbc
|
|
#define CMD_DMANOP 0x18
|
|
#define CMD_DMARMB 0x12
|
|
#define CMD_DMASEV 0x34
|
|
#define CMD_DMAST 0x08
|
|
#define CMD_DMASTP 0x29
|
|
#define CMD_DMASTZ 0x0c
|
|
#define CMD_DMAWFE 0x36
|
|
#define CMD_DMAWFP 0x30
|
|
#define CMD_DMAWMB 0x13
|
|
|
|
#define SZ_DMAADDH 3
|
|
#define SZ_DMAEND 1
|
|
#define SZ_DMAFLUSHP 2
|
|
#define SZ_DMALD 1
|
|
#define SZ_DMALDP 2
|
|
#define SZ_DMALP 2
|
|
#define SZ_DMALPEND 2
|
|
#define SZ_DMAKILL 1
|
|
#define SZ_DMAMOV 6
|
|
#define SZ_DMANOP 1
|
|
#define SZ_DMARMB 1
|
|
#define SZ_DMASEV 2
|
|
#define SZ_DMAST 1
|
|
#define SZ_DMASTP 2
|
|
#define SZ_DMASTZ 1
|
|
#define SZ_DMAWFE 2
|
|
#define SZ_DMAWFP 2
|
|
#define SZ_DMAWMB 1
|
|
#define SZ_DMAGO 6
|
|
|
|
#define BRST_LEN(ccr) ((((ccr) >> CC_SRCBRSTLEN_SHFT) & 0xf) + 1)
|
|
#define BRST_SIZE(ccr) (1 << (((ccr) >> CC_SRCBRSTSIZE_SHFT) & 0x7))
|
|
|
|
#define BYTE_TO_BURST(b, ccr) ((b) / BRST_SIZE(ccr) / BRST_LEN(ccr))
|
|
#define BURST_TO_BYTE(c, ccr) ((c) * BRST_SIZE(ccr) * BRST_LEN(ccr))
|
|
|
|
/*
|
|
* With 256 bytes, we can do more than 2.5MB and 5MB xfers per req
|
|
* at 1byte/burst for P<->M and M<->M respectively.
|
|
* For typical scenario, at 1word/burst, 10MB and 20MB xfers per req
|
|
* should be enough for P<->M and M<->M respectively.
|
|
*/
|
|
#define MCODE_BUFF_PER_REQ 256
|
|
|
|
/* Use this _only_ to wait on transient states */
|
|
#define UNTIL(t, s) while (!(_state(t) & (s))) cpu_relax();
|
|
|
|
#ifdef PL330_DEBUG_MCGEN
|
|
static unsigned cmd_line;
|
|
#define PL330_DBGCMD_DUMP(off, x...) do { \
|
|
printk("%x:", cmd_line); \
|
|
printk(x); \
|
|
cmd_line += off; \
|
|
} while (0)
|
|
#define PL330_DBGMC_START(addr) (cmd_line = addr)
|
|
#else
|
|
#define PL330_DBGCMD_DUMP(off, x...) do {} while (0)
|
|
#define PL330_DBGMC_START(addr) do {} while (0)
|
|
#endif
|
|
|
|
/* The number of default descriptors */
|
|
|
|
#define NR_DEFAULT_DESC 16
|
|
|
|
/* Populated by the PL330 core driver for DMA API driver's info */
|
|
struct pl330_config {
|
|
u32 periph_id;
|
|
#define DMAC_MODE_NS (1 << 0)
|
|
unsigned int mode;
|
|
unsigned int data_bus_width:10; /* In number of bits */
|
|
unsigned int data_buf_dep:10;
|
|
unsigned int num_chan:4;
|
|
unsigned int num_peri:6;
|
|
u32 peri_ns;
|
|
unsigned int num_events:6;
|
|
u32 irq_ns;
|
|
};
|
|
|
|
/**
|
|
* Request Configuration.
|
|
* The PL330 core does not modify this and uses the last
|
|
* working configuration if the request doesn't provide any.
|
|
*
|
|
* The Client may want to provide this info only for the
|
|
* first request and a request with new settings.
|
|
*/
|
|
struct pl330_reqcfg {
|
|
/* Address Incrementing */
|
|
unsigned dst_inc:1;
|
|
unsigned src_inc:1;
|
|
|
|
/*
|
|
* For now, the SRC & DST protection levels
|
|
* and burst size/length are assumed same.
|
|
*/
|
|
bool nonsecure;
|
|
bool privileged;
|
|
bool insnaccess;
|
|
unsigned brst_len:5;
|
|
unsigned brst_size:3; /* in power of 2 */
|
|
|
|
enum pl330_cachectrl dcctl;
|
|
enum pl330_cachectrl scctl;
|
|
enum pl330_byteswap swap;
|
|
struct pl330_config *pcfg;
|
|
};
|
|
|
|
/*
|
|
* One cycle of DMAC operation.
|
|
* There may be more than one xfer in a request.
|
|
*/
|
|
struct pl330_xfer {
|
|
u32 src_addr;
|
|
u32 dst_addr;
|
|
/* Size to xfer */
|
|
u32 bytes;
|
|
};
|
|
|
|
/* The xfer callbacks are made with one of these arguments. */
|
|
enum pl330_op_err {
|
|
/* The all xfers in the request were success. */
|
|
PL330_ERR_NONE,
|
|
/* If req aborted due to global error. */
|
|
PL330_ERR_ABORT,
|
|
/* If req failed due to problem with Channel. */
|
|
PL330_ERR_FAIL,
|
|
};
|
|
|
|
enum dmamov_dst {
|
|
SAR = 0,
|
|
CCR,
|
|
DAR,
|
|
};
|
|
|
|
enum pl330_dst {
|
|
SRC = 0,
|
|
DST,
|
|
};
|
|
|
|
enum pl330_cond {
|
|
SINGLE,
|
|
BURST,
|
|
ALWAYS,
|
|
};
|
|
|
|
struct dma_pl330_desc;
|
|
|
|
struct _pl330_req {
|
|
u32 mc_bus;
|
|
void *mc_cpu;
|
|
struct dma_pl330_desc *desc;
|
|
};
|
|
|
|
/* ToBeDone for tasklet */
|
|
struct _pl330_tbd {
|
|
bool reset_dmac;
|
|
bool reset_mngr;
|
|
u8 reset_chan;
|
|
};
|
|
|
|
/* A DMAC Thread */
|
|
struct pl330_thread {
|
|
u8 id;
|
|
int ev;
|
|
/* If the channel is not yet acquired by any client */
|
|
bool free;
|
|
/* Parent DMAC */
|
|
struct pl330_dmac *dmac;
|
|
/* Only two at a time */
|
|
struct _pl330_req req[2];
|
|
/* Index of the last enqueued request */
|
|
unsigned lstenq;
|
|
/* Index of the last submitted request or -1 if the DMA is stopped */
|
|
int req_running;
|
|
};
|
|
|
|
enum pl330_dmac_state {
|
|
UNINIT,
|
|
INIT,
|
|
DYING,
|
|
};
|
|
|
|
enum desc_status {
|
|
/* In the DMAC pool */
|
|
FREE,
|
|
/*
|
|
* Allocated to some channel during prep_xxx
|
|
* Also may be sitting on the work_list.
|
|
*/
|
|
PREP,
|
|
/*
|
|
* Sitting on the work_list and already submitted
|
|
* to the PL330 core. Not more than two descriptors
|
|
* of a channel can be BUSY at any time.
|
|
*/
|
|
BUSY,
|
|
/*
|
|
* Sitting on the channel work_list but xfer done
|
|
* by PL330 core
|
|
*/
|
|
DONE,
|
|
};
|
|
|
|
struct dma_pl330_chan {
|
|
/* Schedule desc completion */
|
|
struct tasklet_struct task;
|
|
|
|
/* DMA-Engine Channel */
|
|
struct dma_chan chan;
|
|
|
|
/* List of submitted descriptors */
|
|
struct list_head submitted_list;
|
|
/* List of issued descriptors */
|
|
struct list_head work_list;
|
|
/* List of completed descriptors */
|
|
struct list_head completed_list;
|
|
|
|
/* Pointer to the DMAC that manages this channel,
|
|
* NULL if the channel is available to be acquired.
|
|
* As the parent, this DMAC also provides descriptors
|
|
* to the channel.
|
|
*/
|
|
struct pl330_dmac *dmac;
|
|
|
|
/* To protect channel manipulation */
|
|
spinlock_t lock;
|
|
|
|
/*
|
|
* Hardware channel thread of PL330 DMAC. NULL if the channel is
|
|
* available.
|
|
*/
|
|
struct pl330_thread *thread;
|
|
|
|
/* For D-to-M and M-to-D channels */
|
|
int burst_sz; /* the peripheral fifo width */
|
|
int burst_len; /* the number of burst */
|
|
dma_addr_t fifo_addr;
|
|
|
|
/* for cyclic capability */
|
|
bool cyclic;
|
|
};
|
|
|
|
struct pl330_dmac {
|
|
/* DMA-Engine Device */
|
|
struct dma_device ddma;
|
|
|
|
/* Holds info about sg limitations */
|
|
struct device_dma_parameters dma_parms;
|
|
|
|
/* Pool of descriptors available for the DMAC's channels */
|
|
struct list_head desc_pool;
|
|
/* To protect desc_pool manipulation */
|
|
spinlock_t pool_lock;
|
|
|
|
/* Size of MicroCode buffers for each channel. */
|
|
unsigned mcbufsz;
|
|
/* ioremap'ed address of PL330 registers. */
|
|
void __iomem *base;
|
|
/* Populated by the PL330 core driver during pl330_add */
|
|
struct pl330_config pcfg;
|
|
|
|
spinlock_t lock;
|
|
/* Maximum possible events/irqs */
|
|
int events[32];
|
|
/* BUS address of MicroCode buffer */
|
|
dma_addr_t mcode_bus;
|
|
/* CPU address of MicroCode buffer */
|
|
void *mcode_cpu;
|
|
/* List of all Channel threads */
|
|
struct pl330_thread *channels;
|
|
/* Pointer to the MANAGER thread */
|
|
struct pl330_thread *manager;
|
|
/* To handle bad news in interrupt */
|
|
struct tasklet_struct tasks;
|
|
struct _pl330_tbd dmac_tbd;
|
|
/* State of DMAC operation */
|
|
enum pl330_dmac_state state;
|
|
/* Holds list of reqs with due callbacks */
|
|
struct list_head req_done;
|
|
|
|
/* Peripheral channels connected to this DMAC */
|
|
unsigned int num_peripherals;
|
|
struct dma_pl330_chan *peripherals; /* keep at end */
|
|
};
|
|
|
|
struct dma_pl330_desc {
|
|
/* To attach to a queue as child */
|
|
struct list_head node;
|
|
|
|
/* Descriptor for the DMA Engine API */
|
|
struct dma_async_tx_descriptor txd;
|
|
|
|
/* Xfer for PL330 core */
|
|
struct pl330_xfer px;
|
|
|
|
struct pl330_reqcfg rqcfg;
|
|
|
|
enum desc_status status;
|
|
|
|
/* The channel which currently holds this desc */
|
|
struct dma_pl330_chan *pchan;
|
|
|
|
enum dma_transfer_direction rqtype;
|
|
/* Index of peripheral for the xfer. */
|
|
unsigned peri:5;
|
|
/* Hook to attach to DMAC's list of reqs with due callback */
|
|
struct list_head rqd;
|
|
};
|
|
|
|
struct _xfer_spec {
|
|
u32 ccr;
|
|
struct dma_pl330_desc *desc;
|
|
};
|
|
|
|
static inline bool _queue_empty(struct pl330_thread *thrd)
|
|
{
|
|
return thrd->req[0].desc == NULL && thrd->req[1].desc == NULL;
|
|
}
|
|
|
|
static inline bool _queue_full(struct pl330_thread *thrd)
|
|
{
|
|
return thrd->req[0].desc != NULL && thrd->req[1].desc != NULL;
|
|
}
|
|
|
|
static inline bool is_manager(struct pl330_thread *thrd)
|
|
{
|
|
return thrd->dmac->manager == thrd;
|
|
}
|
|
|
|
/* If manager of the thread is in Non-Secure mode */
|
|
static inline bool _manager_ns(struct pl330_thread *thrd)
|
|
{
|
|
return (thrd->dmac->pcfg.mode & DMAC_MODE_NS) ? true : false;
|
|
}
|
|
|
|
static inline u32 get_revision(u32 periph_id)
|
|
{
|
|
return (periph_id >> PERIPH_REV_SHIFT) & PERIPH_REV_MASK;
|
|
}
|
|
|
|
static inline u32 _emit_ADDH(unsigned dry_run, u8 buf[],
|
|
enum pl330_dst da, u16 val)
|
|
{
|
|
if (dry_run)
|
|
return SZ_DMAADDH;
|
|
|
|
buf[0] = CMD_DMAADDH;
|
|
buf[0] |= (da << 1);
|
|
*((u16 *)&buf[1]) = val;
|
|
|
|
PL330_DBGCMD_DUMP(SZ_DMAADDH, "\tDMAADDH %s %u\n",
|
|
da == 1 ? "DA" : "SA", val);
|
|
|
|
return SZ_DMAADDH;
|
|
}
|
|
|
|
static inline u32 _emit_END(unsigned dry_run, u8 buf[])
|
|
{
|
|
if (dry_run)
|
|
return SZ_DMAEND;
|
|
|
|
buf[0] = CMD_DMAEND;
|
|
|
|
PL330_DBGCMD_DUMP(SZ_DMAEND, "\tDMAEND\n");
|
|
|
|
return SZ_DMAEND;
|
|
}
|
|
|
|
static inline u32 _emit_FLUSHP(unsigned dry_run, u8 buf[], u8 peri)
|
|
{
|
|
if (dry_run)
|
|
return SZ_DMAFLUSHP;
|
|
|
|
buf[0] = CMD_DMAFLUSHP;
|
|
|
|
peri &= 0x1f;
|
|
peri <<= 3;
|
|
buf[1] = peri;
|
|
|
|
PL330_DBGCMD_DUMP(SZ_DMAFLUSHP, "\tDMAFLUSHP %u\n", peri >> 3);
|
|
|
|
return SZ_DMAFLUSHP;
|
|
}
|
|
|
|
static inline u32 _emit_LD(unsigned dry_run, u8 buf[], enum pl330_cond cond)
|
|
{
|
|
if (dry_run)
|
|
return SZ_DMALD;
|
|
|
|
buf[0] = CMD_DMALD;
|
|
|
|
if (cond == SINGLE)
|
|
buf[0] |= (0 << 1) | (1 << 0);
|
|
else if (cond == BURST)
|
|
buf[0] |= (1 << 1) | (1 << 0);
|
|
|
|
PL330_DBGCMD_DUMP(SZ_DMALD, "\tDMALD%c\n",
|
|
cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'A'));
|
|
|
|
return SZ_DMALD;
|
|
}
|
|
|
|
static inline u32 _emit_LDP(unsigned dry_run, u8 buf[],
|
|
enum pl330_cond cond, u8 peri)
|
|
{
|
|
if (dry_run)
|
|
return SZ_DMALDP;
|
|
|
|
buf[0] = CMD_DMALDP;
|
|
|
|
if (cond == BURST)
|
|
buf[0] |= (1 << 1);
|
|
|
|
peri &= 0x1f;
|
|
peri <<= 3;
|
|
buf[1] = peri;
|
|
|
|
PL330_DBGCMD_DUMP(SZ_DMALDP, "\tDMALDP%c %u\n",
|
|
cond == SINGLE ? 'S' : 'B', peri >> 3);
|
|
|
|
return SZ_DMALDP;
|
|
}
|
|
|
|
static inline u32 _emit_LP(unsigned dry_run, u8 buf[],
|
|
unsigned loop, u8 cnt)
|
|
{
|
|
if (dry_run)
|
|
return SZ_DMALP;
|
|
|
|
buf[0] = CMD_DMALP;
|
|
|
|
if (loop)
|
|
buf[0] |= (1 << 1);
|
|
|
|
cnt--; /* DMAC increments by 1 internally */
|
|
buf[1] = cnt;
|
|
|
|
PL330_DBGCMD_DUMP(SZ_DMALP, "\tDMALP_%c %u\n", loop ? '1' : '0', cnt);
|
|
|
|
return SZ_DMALP;
|
|
}
|
|
|
|
struct _arg_LPEND {
|
|
enum pl330_cond cond;
|
|
bool forever;
|
|
unsigned loop;
|
|
u8 bjump;
|
|
};
|
|
|
|
static inline u32 _emit_LPEND(unsigned dry_run, u8 buf[],
|
|
const struct _arg_LPEND *arg)
|
|
{
|
|
enum pl330_cond cond = arg->cond;
|
|
bool forever = arg->forever;
|
|
unsigned loop = arg->loop;
|
|
u8 bjump = arg->bjump;
|
|
|
|
if (dry_run)
|
|
return SZ_DMALPEND;
|
|
|
|
buf[0] = CMD_DMALPEND;
|
|
|
|
if (loop)
|
|
buf[0] |= (1 << 2);
|
|
|
|
if (!forever)
|
|
buf[0] |= (1 << 4);
|
|
|
|
if (cond == SINGLE)
|
|
buf[0] |= (0 << 1) | (1 << 0);
|
|
else if (cond == BURST)
|
|
buf[0] |= (1 << 1) | (1 << 0);
|
|
|
|
buf[1] = bjump;
|
|
|
|
PL330_DBGCMD_DUMP(SZ_DMALPEND, "\tDMALP%s%c_%c bjmpto_%x\n",
|
|
forever ? "FE" : "END",
|
|
cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'A'),
|
|
loop ? '1' : '0',
|
|
bjump);
|
|
|
|
return SZ_DMALPEND;
|
|
}
|
|
|
|
static inline u32 _emit_KILL(unsigned dry_run, u8 buf[])
|
|
{
|
|
if (dry_run)
|
|
return SZ_DMAKILL;
|
|
|
|
buf[0] = CMD_DMAKILL;
|
|
|
|
return SZ_DMAKILL;
|
|
}
|
|
|
|
static inline u32 _emit_MOV(unsigned dry_run, u8 buf[],
|
|
enum dmamov_dst dst, u32 val)
|
|
{
|
|
if (dry_run)
|
|
return SZ_DMAMOV;
|
|
|
|
buf[0] = CMD_DMAMOV;
|
|
buf[1] = dst;
|
|
*((u32 *)&buf[2]) = val;
|
|
|
|
PL330_DBGCMD_DUMP(SZ_DMAMOV, "\tDMAMOV %s 0x%x\n",
|
|
dst == SAR ? "SAR" : (dst == DAR ? "DAR" : "CCR"), val);
|
|
|
|
return SZ_DMAMOV;
|
|
}
|
|
|
|
static inline u32 _emit_NOP(unsigned dry_run, u8 buf[])
|
|
{
|
|
if (dry_run)
|
|
return SZ_DMANOP;
|
|
|
|
buf[0] = CMD_DMANOP;
|
|
|
|
PL330_DBGCMD_DUMP(SZ_DMANOP, "\tDMANOP\n");
|
|
|
|
return SZ_DMANOP;
|
|
}
|
|
|
|
static inline u32 _emit_RMB(unsigned dry_run, u8 buf[])
|
|
{
|
|
if (dry_run)
|
|
return SZ_DMARMB;
|
|
|
|
buf[0] = CMD_DMARMB;
|
|
|
|
PL330_DBGCMD_DUMP(SZ_DMARMB, "\tDMARMB\n");
|
|
|
|
return SZ_DMARMB;
|
|
}
|
|
|
|
static inline u32 _emit_SEV(unsigned dry_run, u8 buf[], u8 ev)
|
|
{
|
|
if (dry_run)
|
|
return SZ_DMASEV;
|
|
|
|
buf[0] = CMD_DMASEV;
|
|
|
|
ev &= 0x1f;
|
|
ev <<= 3;
|
|
buf[1] = ev;
|
|
|
|
PL330_DBGCMD_DUMP(SZ_DMASEV, "\tDMASEV %u\n", ev >> 3);
|
|
|
|
return SZ_DMASEV;
|
|
}
|
|
|
|
static inline u32 _emit_ST(unsigned dry_run, u8 buf[], enum pl330_cond cond)
|
|
{
|
|
if (dry_run)
|
|
return SZ_DMAST;
|
|
|
|
buf[0] = CMD_DMAST;
|
|
|
|
if (cond == SINGLE)
|
|
buf[0] |= (0 << 1) | (1 << 0);
|
|
else if (cond == BURST)
|
|
buf[0] |= (1 << 1) | (1 << 0);
|
|
|
|
PL330_DBGCMD_DUMP(SZ_DMAST, "\tDMAST%c\n",
|
|
cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'A'));
|
|
|
|
return SZ_DMAST;
|
|
}
|
|
|
|
static inline u32 _emit_STP(unsigned dry_run, u8 buf[],
|
|
enum pl330_cond cond, u8 peri)
|
|
{
|
|
if (dry_run)
|
|
return SZ_DMASTP;
|
|
|
|
buf[0] = CMD_DMASTP;
|
|
|
|
if (cond == BURST)
|
|
buf[0] |= (1 << 1);
|
|
|
|
peri &= 0x1f;
|
|
peri <<= 3;
|
|
buf[1] = peri;
|
|
|
|
PL330_DBGCMD_DUMP(SZ_DMASTP, "\tDMASTP%c %u\n",
|
|
cond == SINGLE ? 'S' : 'B', peri >> 3);
|
|
|
|
return SZ_DMASTP;
|
|
}
|
|
|
|
static inline u32 _emit_STZ(unsigned dry_run, u8 buf[])
|
|
{
|
|
if (dry_run)
|
|
return SZ_DMASTZ;
|
|
|
|
buf[0] = CMD_DMASTZ;
|
|
|
|
PL330_DBGCMD_DUMP(SZ_DMASTZ, "\tDMASTZ\n");
|
|
|
|
return SZ_DMASTZ;
|
|
}
|
|
|
|
static inline u32 _emit_WFE(unsigned dry_run, u8 buf[], u8 ev,
|
|
unsigned invalidate)
|
|
{
|
|
if (dry_run)
|
|
return SZ_DMAWFE;
|
|
|
|
buf[0] = CMD_DMAWFE;
|
|
|
|
ev &= 0x1f;
|
|
ev <<= 3;
|
|
buf[1] = ev;
|
|
|
|
if (invalidate)
|
|
buf[1] |= (1 << 1);
|
|
|
|
PL330_DBGCMD_DUMP(SZ_DMAWFE, "\tDMAWFE %u%s\n",
|
|
ev >> 3, invalidate ? ", I" : "");
|
|
|
|
return SZ_DMAWFE;
|
|
}
|
|
|
|
static inline u32 _emit_WFP(unsigned dry_run, u8 buf[],
|
|
enum pl330_cond cond, u8 peri)
|
|
{
|
|
if (dry_run)
|
|
return SZ_DMAWFP;
|
|
|
|
buf[0] = CMD_DMAWFP;
|
|
|
|
if (cond == SINGLE)
|
|
buf[0] |= (0 << 1) | (0 << 0);
|
|
else if (cond == BURST)
|
|
buf[0] |= (1 << 1) | (0 << 0);
|
|
else
|
|
buf[0] |= (0 << 1) | (1 << 0);
|
|
|
|
peri &= 0x1f;
|
|
peri <<= 3;
|
|
buf[1] = peri;
|
|
|
|
PL330_DBGCMD_DUMP(SZ_DMAWFP, "\tDMAWFP%c %u\n",
|
|
cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'P'), peri >> 3);
|
|
|
|
return SZ_DMAWFP;
|
|
}
|
|
|
|
static inline u32 _emit_WMB(unsigned dry_run, u8 buf[])
|
|
{
|
|
if (dry_run)
|
|
return SZ_DMAWMB;
|
|
|
|
buf[0] = CMD_DMAWMB;
|
|
|
|
PL330_DBGCMD_DUMP(SZ_DMAWMB, "\tDMAWMB\n");
|
|
|
|
return SZ_DMAWMB;
|
|
}
|
|
|
|
struct _arg_GO {
|
|
u8 chan;
|
|
u32 addr;
|
|
unsigned ns;
|
|
};
|
|
|
|
static inline u32 _emit_GO(unsigned dry_run, u8 buf[],
|
|
const struct _arg_GO *arg)
|
|
{
|
|
u8 chan = arg->chan;
|
|
u32 addr = arg->addr;
|
|
unsigned ns = arg->ns;
|
|
|
|
if (dry_run)
|
|
return SZ_DMAGO;
|
|
|
|
buf[0] = CMD_DMAGO;
|
|
buf[0] |= (ns << 1);
|
|
|
|
buf[1] = chan & 0x7;
|
|
|
|
*((u32 *)&buf[2]) = addr;
|
|
|
|
return SZ_DMAGO;
|
|
}
|
|
|
|
#define msecs_to_loops(t) (loops_per_jiffy / 1000 * HZ * t)
|
|
|
|
/* Returns Time-Out */
|
|
static bool _until_dmac_idle(struct pl330_thread *thrd)
|
|
{
|
|
void __iomem *regs = thrd->dmac->base;
|
|
unsigned long loops = msecs_to_loops(5);
|
|
|
|
do {
|
|
/* Until Manager is Idle */
|
|
if (!(readl(regs + DBGSTATUS) & DBG_BUSY))
|
|
break;
|
|
|
|
cpu_relax();
|
|
} while (--loops);
|
|
|
|
if (!loops)
|
|
return true;
|
|
|
|
return false;
|
|
}
|
|
|
|
static inline void _execute_DBGINSN(struct pl330_thread *thrd,
|
|
u8 insn[], bool as_manager)
|
|
{
|
|
void __iomem *regs = thrd->dmac->base;
|
|
u32 val;
|
|
|
|
val = (insn[0] << 16) | (insn[1] << 24);
|
|
if (!as_manager) {
|
|
val |= (1 << 0);
|
|
val |= (thrd->id << 8); /* Channel Number */
|
|
}
|
|
writel(val, regs + DBGINST0);
|
|
|
|
val = *((u32 *)&insn[2]);
|
|
writel(val, regs + DBGINST1);
|
|
|
|
/* If timed out due to halted state-machine */
|
|
if (_until_dmac_idle(thrd)) {
|
|
dev_err(thrd->dmac->ddma.dev, "DMAC halted!\n");
|
|
return;
|
|
}
|
|
|
|
/* Get going */
|
|
writel(0, regs + DBGCMD);
|
|
}
|
|
|
|
static inline u32 _state(struct pl330_thread *thrd)
|
|
{
|
|
void __iomem *regs = thrd->dmac->base;
|
|
u32 val;
|
|
|
|
if (is_manager(thrd))
|
|
val = readl(regs + DS) & 0xf;
|
|
else
|
|
val = readl(regs + CS(thrd->id)) & 0xf;
|
|
|
|
switch (val) {
|
|
case DS_ST_STOP:
|
|
return PL330_STATE_STOPPED;
|
|
case DS_ST_EXEC:
|
|
return PL330_STATE_EXECUTING;
|
|
case DS_ST_CMISS:
|
|
return PL330_STATE_CACHEMISS;
|
|
case DS_ST_UPDTPC:
|
|
return PL330_STATE_UPDTPC;
|
|
case DS_ST_WFE:
|
|
return PL330_STATE_WFE;
|
|
case DS_ST_FAULT:
|
|
return PL330_STATE_FAULTING;
|
|
case DS_ST_ATBRR:
|
|
if (is_manager(thrd))
|
|
return PL330_STATE_INVALID;
|
|
else
|
|
return PL330_STATE_ATBARRIER;
|
|
case DS_ST_QBUSY:
|
|
if (is_manager(thrd))
|
|
return PL330_STATE_INVALID;
|
|
else
|
|
return PL330_STATE_QUEUEBUSY;
|
|
case DS_ST_WFP:
|
|
if (is_manager(thrd))
|
|
return PL330_STATE_INVALID;
|
|
else
|
|
return PL330_STATE_WFP;
|
|
case DS_ST_KILL:
|
|
if (is_manager(thrd))
|
|
return PL330_STATE_INVALID;
|
|
else
|
|
return PL330_STATE_KILLING;
|
|
case DS_ST_CMPLT:
|
|
if (is_manager(thrd))
|
|
return PL330_STATE_INVALID;
|
|
else
|
|
return PL330_STATE_COMPLETING;
|
|
case DS_ST_FLTCMP:
|
|
if (is_manager(thrd))
|
|
return PL330_STATE_INVALID;
|
|
else
|
|
return PL330_STATE_FAULT_COMPLETING;
|
|
default:
|
|
return PL330_STATE_INVALID;
|
|
}
|
|
}
|
|
|
|
static void _stop(struct pl330_thread *thrd)
|
|
{
|
|
void __iomem *regs = thrd->dmac->base;
|
|
u8 insn[6] = {0, 0, 0, 0, 0, 0};
|
|
|
|
if (_state(thrd) == PL330_STATE_FAULT_COMPLETING)
|
|
UNTIL(thrd, PL330_STATE_FAULTING | PL330_STATE_KILLING);
|
|
|
|
/* Return if nothing needs to be done */
|
|
if (_state(thrd) == PL330_STATE_COMPLETING
|
|
|| _state(thrd) == PL330_STATE_KILLING
|
|
|| _state(thrd) == PL330_STATE_STOPPED)
|
|
return;
|
|
|
|
_emit_KILL(0, insn);
|
|
|
|
/* Stop generating interrupts for SEV */
|
|
writel(readl(regs + INTEN) & ~(1 << thrd->ev), regs + INTEN);
|
|
|
|
_execute_DBGINSN(thrd, insn, is_manager(thrd));
|
|
}
|
|
|
|
/* Start doing req 'idx' of thread 'thrd' */
|
|
static bool _trigger(struct pl330_thread *thrd)
|
|
{
|
|
void __iomem *regs = thrd->dmac->base;
|
|
struct _pl330_req *req;
|
|
struct dma_pl330_desc *desc;
|
|
struct _arg_GO go;
|
|
unsigned ns;
|
|
u8 insn[6] = {0, 0, 0, 0, 0, 0};
|
|
int idx;
|
|
|
|
/* Return if already ACTIVE */
|
|
if (_state(thrd) != PL330_STATE_STOPPED)
|
|
return true;
|
|
|
|
idx = 1 - thrd->lstenq;
|
|
if (thrd->req[idx].desc != NULL) {
|
|
req = &thrd->req[idx];
|
|
} else {
|
|
idx = thrd->lstenq;
|
|
if (thrd->req[idx].desc != NULL)
|
|
req = &thrd->req[idx];
|
|
else
|
|
req = NULL;
|
|
}
|
|
|
|
/* Return if no request */
|
|
if (!req)
|
|
return true;
|
|
|
|
desc = req->desc;
|
|
|
|
ns = desc->rqcfg.nonsecure ? 1 : 0;
|
|
|
|
/* See 'Abort Sources' point-4 at Page 2-25 */
|
|
if (_manager_ns(thrd) && !ns)
|
|
dev_info(thrd->dmac->ddma.dev, "%s:%d Recipe for ABORT!\n",
|
|
__func__, __LINE__);
|
|
|
|
go.chan = thrd->id;
|
|
go.addr = req->mc_bus;
|
|
go.ns = ns;
|
|
_emit_GO(0, insn, &go);
|
|
|
|
/* Set to generate interrupts for SEV */
|
|
writel(readl(regs + INTEN) | (1 << thrd->ev), regs + INTEN);
|
|
|
|
/* Only manager can execute GO */
|
|
_execute_DBGINSN(thrd, insn, true);
|
|
|
|
thrd->req_running = idx;
|
|
|
|
return true;
|
|
}
|
|
|
|
static bool _start(struct pl330_thread *thrd)
|
|
{
|
|
switch (_state(thrd)) {
|
|
case PL330_STATE_FAULT_COMPLETING:
|
|
UNTIL(thrd, PL330_STATE_FAULTING | PL330_STATE_KILLING);
|
|
|
|
if (_state(thrd) == PL330_STATE_KILLING)
|
|
UNTIL(thrd, PL330_STATE_STOPPED)
|
|
|
|
case PL330_STATE_FAULTING:
|
|
_stop(thrd);
|
|
|
|
case PL330_STATE_KILLING:
|
|
case PL330_STATE_COMPLETING:
|
|
UNTIL(thrd, PL330_STATE_STOPPED)
|
|
|
|
case PL330_STATE_STOPPED:
|
|
return _trigger(thrd);
|
|
|
|
case PL330_STATE_WFP:
|
|
case PL330_STATE_QUEUEBUSY:
|
|
case PL330_STATE_ATBARRIER:
|
|
case PL330_STATE_UPDTPC:
|
|
case PL330_STATE_CACHEMISS:
|
|
case PL330_STATE_EXECUTING:
|
|
return true;
|
|
|
|
case PL330_STATE_WFE: /* For RESUME, nothing yet */
|
|
default:
|
|
return false;
|
|
}
|
|
}
|
|
|
|
static inline int _ldst_memtomem(unsigned dry_run, u8 buf[],
|
|
const struct _xfer_spec *pxs, int cyc)
|
|
{
|
|
int off = 0;
|
|
struct pl330_config *pcfg = pxs->desc->rqcfg.pcfg;
|
|
|
|
/* check lock-up free version */
|
|
if (get_revision(pcfg->periph_id) >= PERIPH_REV_R1P0) {
|
|
while (cyc--) {
|
|
off += _emit_LD(dry_run, &buf[off], ALWAYS);
|
|
off += _emit_ST(dry_run, &buf[off], ALWAYS);
|
|
}
|
|
} else {
|
|
while (cyc--) {
|
|
off += _emit_LD(dry_run, &buf[off], ALWAYS);
|
|
off += _emit_RMB(dry_run, &buf[off]);
|
|
off += _emit_ST(dry_run, &buf[off], ALWAYS);
|
|
off += _emit_WMB(dry_run, &buf[off]);
|
|
}
|
|
}
|
|
|
|
return off;
|
|
}
|
|
|
|
static inline int _ldst_devtomem(unsigned dry_run, u8 buf[],
|
|
const struct _xfer_spec *pxs, int cyc)
|
|
{
|
|
int off = 0;
|
|
|
|
while (cyc--) {
|
|
off += _emit_WFP(dry_run, &buf[off], SINGLE, pxs->desc->peri);
|
|
off += _emit_LDP(dry_run, &buf[off], SINGLE, pxs->desc->peri);
|
|
off += _emit_ST(dry_run, &buf[off], ALWAYS);
|
|
off += _emit_FLUSHP(dry_run, &buf[off], pxs->desc->peri);
|
|
}
|
|
|
|
return off;
|
|
}
|
|
|
|
static inline int _ldst_memtodev(unsigned dry_run, u8 buf[],
|
|
const struct _xfer_spec *pxs, int cyc)
|
|
{
|
|
int off = 0;
|
|
|
|
while (cyc--) {
|
|
off += _emit_WFP(dry_run, &buf[off], SINGLE, pxs->desc->peri);
|
|
off += _emit_LD(dry_run, &buf[off], ALWAYS);
|
|
off += _emit_STP(dry_run, &buf[off], SINGLE, pxs->desc->peri);
|
|
off += _emit_FLUSHP(dry_run, &buf[off], pxs->desc->peri);
|
|
}
|
|
|
|
return off;
|
|
}
|
|
|
|
static int _bursts(unsigned dry_run, u8 buf[],
|
|
const struct _xfer_spec *pxs, int cyc)
|
|
{
|
|
int off = 0;
|
|
|
|
switch (pxs->desc->rqtype) {
|
|
case DMA_MEM_TO_DEV:
|
|
off += _ldst_memtodev(dry_run, &buf[off], pxs, cyc);
|
|
break;
|
|
case DMA_DEV_TO_MEM:
|
|
off += _ldst_devtomem(dry_run, &buf[off], pxs, cyc);
|
|
break;
|
|
case DMA_MEM_TO_MEM:
|
|
off += _ldst_memtomem(dry_run, &buf[off], pxs, cyc);
|
|
break;
|
|
default:
|
|
off += 0x40000000; /* Scare off the Client */
|
|
break;
|
|
}
|
|
|
|
return off;
|
|
}
|
|
|
|
/* Returns bytes consumed and updates bursts */
|
|
static inline int _loop(unsigned dry_run, u8 buf[],
|
|
unsigned long *bursts, const struct _xfer_spec *pxs)
|
|
{
|
|
int cyc, cycmax, szlp, szlpend, szbrst, off;
|
|
unsigned lcnt0, lcnt1, ljmp0, ljmp1;
|
|
struct _arg_LPEND lpend;
|
|
|
|
/* Max iterations possible in DMALP is 256 */
|
|
if (*bursts >= 256*256) {
|
|
lcnt1 = 256;
|
|
lcnt0 = 256;
|
|
cyc = *bursts / lcnt1 / lcnt0;
|
|
} else if (*bursts > 256) {
|
|
lcnt1 = 256;
|
|
lcnt0 = *bursts / lcnt1;
|
|
cyc = 1;
|
|
} else {
|
|
lcnt1 = *bursts;
|
|
lcnt0 = 0;
|
|
cyc = 1;
|
|
}
|
|
|
|
szlp = _emit_LP(1, buf, 0, 0);
|
|
szbrst = _bursts(1, buf, pxs, 1);
|
|
|
|
lpend.cond = ALWAYS;
|
|
lpend.forever = false;
|
|
lpend.loop = 0;
|
|
lpend.bjump = 0;
|
|
szlpend = _emit_LPEND(1, buf, &lpend);
|
|
|
|
if (lcnt0) {
|
|
szlp *= 2;
|
|
szlpend *= 2;
|
|
}
|
|
|
|
/*
|
|
* Max bursts that we can unroll due to limit on the
|
|
* size of backward jump that can be encoded in DMALPEND
|
|
* which is 8-bits and hence 255
|
|
*/
|
|
cycmax = (255 - (szlp + szlpend)) / szbrst;
|
|
|
|
cyc = (cycmax < cyc) ? cycmax : cyc;
|
|
|
|
off = 0;
|
|
|
|
if (lcnt0) {
|
|
off += _emit_LP(dry_run, &buf[off], 0, lcnt0);
|
|
ljmp0 = off;
|
|
}
|
|
|
|
off += _emit_LP(dry_run, &buf[off], 1, lcnt1);
|
|
ljmp1 = off;
|
|
|
|
off += _bursts(dry_run, &buf[off], pxs, cyc);
|
|
|
|
lpend.cond = ALWAYS;
|
|
lpend.forever = false;
|
|
lpend.loop = 1;
|
|
lpend.bjump = off - ljmp1;
|
|
off += _emit_LPEND(dry_run, &buf[off], &lpend);
|
|
|
|
if (lcnt0) {
|
|
lpend.cond = ALWAYS;
|
|
lpend.forever = false;
|
|
lpend.loop = 0;
|
|
lpend.bjump = off - ljmp0;
|
|
off += _emit_LPEND(dry_run, &buf[off], &lpend);
|
|
}
|
|
|
|
*bursts = lcnt1 * cyc;
|
|
if (lcnt0)
|
|
*bursts *= lcnt0;
|
|
|
|
return off;
|
|
}
|
|
|
|
static inline int _setup_loops(unsigned dry_run, u8 buf[],
|
|
const struct _xfer_spec *pxs)
|
|
{
|
|
struct pl330_xfer *x = &pxs->desc->px;
|
|
u32 ccr = pxs->ccr;
|
|
unsigned long c, bursts = BYTE_TO_BURST(x->bytes, ccr);
|
|
int off = 0;
|
|
|
|
while (bursts) {
|
|
c = bursts;
|
|
off += _loop(dry_run, &buf[off], &c, pxs);
|
|
bursts -= c;
|
|
}
|
|
|
|
return off;
|
|
}
|
|
|
|
static inline int _setup_xfer(unsigned dry_run, u8 buf[],
|
|
const struct _xfer_spec *pxs)
|
|
{
|
|
struct pl330_xfer *x = &pxs->desc->px;
|
|
int off = 0;
|
|
|
|
/* DMAMOV SAR, x->src_addr */
|
|
off += _emit_MOV(dry_run, &buf[off], SAR, x->src_addr);
|
|
/* DMAMOV DAR, x->dst_addr */
|
|
off += _emit_MOV(dry_run, &buf[off], DAR, x->dst_addr);
|
|
|
|
/* Setup Loop(s) */
|
|
off += _setup_loops(dry_run, &buf[off], pxs);
|
|
|
|
return off;
|
|
}
|
|
|
|
/*
|
|
* A req is a sequence of one or more xfer units.
|
|
* Returns the number of bytes taken to setup the MC for the req.
|
|
*/
|
|
static int _setup_req(unsigned dry_run, struct pl330_thread *thrd,
|
|
unsigned index, struct _xfer_spec *pxs)
|
|
{
|
|
struct _pl330_req *req = &thrd->req[index];
|
|
struct pl330_xfer *x;
|
|
u8 *buf = req->mc_cpu;
|
|
int off = 0;
|
|
|
|
PL330_DBGMC_START(req->mc_bus);
|
|
|
|
/* DMAMOV CCR, ccr */
|
|
off += _emit_MOV(dry_run, &buf[off], CCR, pxs->ccr);
|
|
|
|
x = &pxs->desc->px;
|
|
/* Error if xfer length is not aligned at burst size */
|
|
if (x->bytes % (BRST_SIZE(pxs->ccr) * BRST_LEN(pxs->ccr)))
|
|
return -EINVAL;
|
|
|
|
off += _setup_xfer(dry_run, &buf[off], pxs);
|
|
|
|
/* DMASEV peripheral/event */
|
|
off += _emit_SEV(dry_run, &buf[off], thrd->ev);
|
|
/* DMAEND */
|
|
off += _emit_END(dry_run, &buf[off]);
|
|
|
|
return off;
|
|
}
|
|
|
|
static inline u32 _prepare_ccr(const struct pl330_reqcfg *rqc)
|
|
{
|
|
u32 ccr = 0;
|
|
|
|
if (rqc->src_inc)
|
|
ccr |= CC_SRCINC;
|
|
|
|
if (rqc->dst_inc)
|
|
ccr |= CC_DSTINC;
|
|
|
|
/* We set same protection levels for Src and DST for now */
|
|
if (rqc->privileged)
|
|
ccr |= CC_SRCPRI | CC_DSTPRI;
|
|
if (rqc->nonsecure)
|
|
ccr |= CC_SRCNS | CC_DSTNS;
|
|
if (rqc->insnaccess)
|
|
ccr |= CC_SRCIA | CC_DSTIA;
|
|
|
|
ccr |= (((rqc->brst_len - 1) & 0xf) << CC_SRCBRSTLEN_SHFT);
|
|
ccr |= (((rqc->brst_len - 1) & 0xf) << CC_DSTBRSTLEN_SHFT);
|
|
|
|
ccr |= (rqc->brst_size << CC_SRCBRSTSIZE_SHFT);
|
|
ccr |= (rqc->brst_size << CC_DSTBRSTSIZE_SHFT);
|
|
|
|
ccr |= (rqc->scctl << CC_SRCCCTRL_SHFT);
|
|
ccr |= (rqc->dcctl << CC_DSTCCTRL_SHFT);
|
|
|
|
ccr |= (rqc->swap << CC_SWAP_SHFT);
|
|
|
|
return ccr;
|
|
}
|
|
|
|
/*
|
|
* Submit a list of xfers after which the client wants notification.
|
|
* Client is not notified after each xfer unit, just once after all
|
|
* xfer units are done or some error occurs.
|
|
*/
|
|
static int pl330_submit_req(struct pl330_thread *thrd,
|
|
struct dma_pl330_desc *desc)
|
|
{
|
|
struct pl330_dmac *pl330 = thrd->dmac;
|
|
struct _xfer_spec xs;
|
|
unsigned long flags;
|
|
unsigned idx;
|
|
u32 ccr;
|
|
int ret = 0;
|
|
|
|
if (pl330->state == DYING
|
|
|| pl330->dmac_tbd.reset_chan & (1 << thrd->id)) {
|
|
dev_info(thrd->dmac->ddma.dev, "%s:%d\n",
|
|
__func__, __LINE__);
|
|
return -EAGAIN;
|
|
}
|
|
|
|
/* If request for non-existing peripheral */
|
|
if (desc->rqtype != DMA_MEM_TO_MEM &&
|
|
desc->peri >= pl330->pcfg.num_peri) {
|
|
dev_info(thrd->dmac->ddma.dev,
|
|
"%s:%d Invalid peripheral(%u)!\n",
|
|
__func__, __LINE__, desc->peri);
|
|
return -EINVAL;
|
|
}
|
|
|
|
spin_lock_irqsave(&pl330->lock, flags);
|
|
|
|
if (_queue_full(thrd)) {
|
|
ret = -EAGAIN;
|
|
goto xfer_exit;
|
|
}
|
|
|
|
/* Prefer Secure Channel */
|
|
if (!_manager_ns(thrd))
|
|
desc->rqcfg.nonsecure = 0;
|
|
else
|
|
desc->rqcfg.nonsecure = 1;
|
|
|
|
ccr = _prepare_ccr(&desc->rqcfg);
|
|
|
|
idx = thrd->req[0].desc == NULL ? 0 : 1;
|
|
|
|
xs.ccr = ccr;
|
|
xs.desc = desc;
|
|
|
|
/* First dry run to check if req is acceptable */
|
|
ret = _setup_req(1, thrd, idx, &xs);
|
|
if (ret < 0)
|
|
goto xfer_exit;
|
|
|
|
if (ret > pl330->mcbufsz / 2) {
|
|
dev_info(pl330->ddma.dev, "%s:%d Trying increasing mcbufsz\n",
|
|
__func__, __LINE__);
|
|
ret = -ENOMEM;
|
|
goto xfer_exit;
|
|
}
|
|
|
|
/* Hook the request */
|
|
thrd->lstenq = idx;
|
|
thrd->req[idx].desc = desc;
|
|
_setup_req(0, thrd, idx, &xs);
|
|
|
|
ret = 0;
|
|
|
|
xfer_exit:
|
|
spin_unlock_irqrestore(&pl330->lock, flags);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void dma_pl330_rqcb(struct dma_pl330_desc *desc, enum pl330_op_err err)
|
|
{
|
|
struct dma_pl330_chan *pch;
|
|
unsigned long flags;
|
|
|
|
if (!desc)
|
|
return;
|
|
|
|
pch = desc->pchan;
|
|
|
|
/* If desc aborted */
|
|
if (!pch)
|
|
return;
|
|
|
|
spin_lock_irqsave(&pch->lock, flags);
|
|
|
|
desc->status = DONE;
|
|
|
|
spin_unlock_irqrestore(&pch->lock, flags);
|
|
|
|
tasklet_schedule(&pch->task);
|
|
}
|
|
|
|
static void pl330_dotask(unsigned long data)
|
|
{
|
|
struct pl330_dmac *pl330 = (struct pl330_dmac *) data;
|
|
unsigned long flags;
|
|
int i;
|
|
|
|
spin_lock_irqsave(&pl330->lock, flags);
|
|
|
|
/* The DMAC itself gone nuts */
|
|
if (pl330->dmac_tbd.reset_dmac) {
|
|
pl330->state = DYING;
|
|
/* Reset the manager too */
|
|
pl330->dmac_tbd.reset_mngr = true;
|
|
/* Clear the reset flag */
|
|
pl330->dmac_tbd.reset_dmac = false;
|
|
}
|
|
|
|
if (pl330->dmac_tbd.reset_mngr) {
|
|
_stop(pl330->manager);
|
|
/* Reset all channels */
|
|
pl330->dmac_tbd.reset_chan = (1 << pl330->pcfg.num_chan) - 1;
|
|
/* Clear the reset flag */
|
|
pl330->dmac_tbd.reset_mngr = false;
|
|
}
|
|
|
|
for (i = 0; i < pl330->pcfg.num_chan; i++) {
|
|
|
|
if (pl330->dmac_tbd.reset_chan & (1 << i)) {
|
|
struct pl330_thread *thrd = &pl330->channels[i];
|
|
void __iomem *regs = pl330->base;
|
|
enum pl330_op_err err;
|
|
|
|
_stop(thrd);
|
|
|
|
if (readl(regs + FSC) & (1 << thrd->id))
|
|
err = PL330_ERR_FAIL;
|
|
else
|
|
err = PL330_ERR_ABORT;
|
|
|
|
spin_unlock_irqrestore(&pl330->lock, flags);
|
|
dma_pl330_rqcb(thrd->req[1 - thrd->lstenq].desc, err);
|
|
dma_pl330_rqcb(thrd->req[thrd->lstenq].desc, err);
|
|
spin_lock_irqsave(&pl330->lock, flags);
|
|
|
|
thrd->req[0].desc = NULL;
|
|
thrd->req[1].desc = NULL;
|
|
thrd->req_running = -1;
|
|
|
|
/* Clear the reset flag */
|
|
pl330->dmac_tbd.reset_chan &= ~(1 << i);
|
|
}
|
|
}
|
|
|
|
spin_unlock_irqrestore(&pl330->lock, flags);
|
|
|
|
return;
|
|
}
|
|
|
|
/* Returns 1 if state was updated, 0 otherwise */
|
|
static int pl330_update(struct pl330_dmac *pl330)
|
|
{
|
|
struct dma_pl330_desc *descdone, *tmp;
|
|
unsigned long flags;
|
|
void __iomem *regs;
|
|
u32 val;
|
|
int id, ev, ret = 0;
|
|
|
|
regs = pl330->base;
|
|
|
|
spin_lock_irqsave(&pl330->lock, flags);
|
|
|
|
val = readl(regs + FSM) & 0x1;
|
|
if (val)
|
|
pl330->dmac_tbd.reset_mngr = true;
|
|
else
|
|
pl330->dmac_tbd.reset_mngr = false;
|
|
|
|
val = readl(regs + FSC) & ((1 << pl330->pcfg.num_chan) - 1);
|
|
pl330->dmac_tbd.reset_chan |= val;
|
|
if (val) {
|
|
int i = 0;
|
|
while (i < pl330->pcfg.num_chan) {
|
|
if (val & (1 << i)) {
|
|
dev_info(pl330->ddma.dev,
|
|
"Reset Channel-%d\t CS-%x FTC-%x\n",
|
|
i, readl(regs + CS(i)),
|
|
readl(regs + FTC(i)));
|
|
_stop(&pl330->channels[i]);
|
|
}
|
|
i++;
|
|
}
|
|
}
|
|
|
|
/* Check which event happened i.e, thread notified */
|
|
val = readl(regs + ES);
|
|
if (pl330->pcfg.num_events < 32
|
|
&& val & ~((1 << pl330->pcfg.num_events) - 1)) {
|
|
pl330->dmac_tbd.reset_dmac = true;
|
|
dev_err(pl330->ddma.dev, "%s:%d Unexpected!\n", __func__,
|
|
__LINE__);
|
|
ret = 1;
|
|
goto updt_exit;
|
|
}
|
|
|
|
for (ev = 0; ev < pl330->pcfg.num_events; ev++) {
|
|
if (val & (1 << ev)) { /* Event occurred */
|
|
struct pl330_thread *thrd;
|
|
u32 inten = readl(regs + INTEN);
|
|
int active;
|
|
|
|
/* Clear the event */
|
|
if (inten & (1 << ev))
|
|
writel(1 << ev, regs + INTCLR);
|
|
|
|
ret = 1;
|
|
|
|
id = pl330->events[ev];
|
|
|
|
thrd = &pl330->channels[id];
|
|
|
|
active = thrd->req_running;
|
|
if (active == -1) /* Aborted */
|
|
continue;
|
|
|
|
/* Detach the req */
|
|
descdone = thrd->req[active].desc;
|
|
thrd->req[active].desc = NULL;
|
|
|
|
/* Get going again ASAP */
|
|
_start(thrd);
|
|
|
|
/* For now, just make a list of callbacks to be done */
|
|
list_add_tail(&descdone->rqd, &pl330->req_done);
|
|
}
|
|
}
|
|
|
|
/* Now that we are in no hurry, do the callbacks */
|
|
list_for_each_entry_safe(descdone, tmp, &pl330->req_done, rqd) {
|
|
list_del(&descdone->rqd);
|
|
spin_unlock_irqrestore(&pl330->lock, flags);
|
|
dma_pl330_rqcb(descdone, PL330_ERR_NONE);
|
|
spin_lock_irqsave(&pl330->lock, flags);
|
|
}
|
|
|
|
updt_exit:
|
|
spin_unlock_irqrestore(&pl330->lock, flags);
|
|
|
|
if (pl330->dmac_tbd.reset_dmac
|
|
|| pl330->dmac_tbd.reset_mngr
|
|
|| pl330->dmac_tbd.reset_chan) {
|
|
ret = 1;
|
|
tasklet_schedule(&pl330->tasks);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
/* Reserve an event */
|
|
static inline int _alloc_event(struct pl330_thread *thrd)
|
|
{
|
|
struct pl330_dmac *pl330 = thrd->dmac;
|
|
int ev;
|
|
|
|
for (ev = 0; ev < pl330->pcfg.num_events; ev++)
|
|
if (pl330->events[ev] == -1) {
|
|
pl330->events[ev] = thrd->id;
|
|
return ev;
|
|
}
|
|
|
|
return -1;
|
|
}
|
|
|
|
static bool _chan_ns(const struct pl330_dmac *pl330, int i)
|
|
{
|
|
return pl330->pcfg.irq_ns & (1 << i);
|
|
}
|
|
|
|
/* Upon success, returns IdentityToken for the
|
|
* allocated channel, NULL otherwise.
|
|
*/
|
|
static struct pl330_thread *pl330_request_channel(struct pl330_dmac *pl330)
|
|
{
|
|
struct pl330_thread *thrd = NULL;
|
|
unsigned long flags;
|
|
int chans, i;
|
|
|
|
if (pl330->state == DYING)
|
|
return NULL;
|
|
|
|
chans = pl330->pcfg.num_chan;
|
|
|
|
spin_lock_irqsave(&pl330->lock, flags);
|
|
|
|
for (i = 0; i < chans; i++) {
|
|
thrd = &pl330->channels[i];
|
|
if ((thrd->free) && (!_manager_ns(thrd) ||
|
|
_chan_ns(pl330, i))) {
|
|
thrd->ev = _alloc_event(thrd);
|
|
if (thrd->ev >= 0) {
|
|
thrd->free = false;
|
|
thrd->lstenq = 1;
|
|
thrd->req[0].desc = NULL;
|
|
thrd->req[1].desc = NULL;
|
|
thrd->req_running = -1;
|
|
break;
|
|
}
|
|
}
|
|
thrd = NULL;
|
|
}
|
|
|
|
spin_unlock_irqrestore(&pl330->lock, flags);
|
|
|
|
return thrd;
|
|
}
|
|
|
|
/* Release an event */
|
|
static inline void _free_event(struct pl330_thread *thrd, int ev)
|
|
{
|
|
struct pl330_dmac *pl330 = thrd->dmac;
|
|
|
|
/* If the event is valid and was held by the thread */
|
|
if (ev >= 0 && ev < pl330->pcfg.num_events
|
|
&& pl330->events[ev] == thrd->id)
|
|
pl330->events[ev] = -1;
|
|
}
|
|
|
|
static void pl330_release_channel(struct pl330_thread *thrd)
|
|
{
|
|
struct pl330_dmac *pl330;
|
|
unsigned long flags;
|
|
|
|
if (!thrd || thrd->free)
|
|
return;
|
|
|
|
_stop(thrd);
|
|
|
|
dma_pl330_rqcb(thrd->req[1 - thrd->lstenq].desc, PL330_ERR_ABORT);
|
|
dma_pl330_rqcb(thrd->req[thrd->lstenq].desc, PL330_ERR_ABORT);
|
|
|
|
pl330 = thrd->dmac;
|
|
|
|
spin_lock_irqsave(&pl330->lock, flags);
|
|
_free_event(thrd, thrd->ev);
|
|
thrd->free = true;
|
|
spin_unlock_irqrestore(&pl330->lock, flags);
|
|
}
|
|
|
|
/* Initialize the structure for PL330 configuration, that can be used
|
|
* by the client driver the make best use of the DMAC
|
|
*/
|
|
static void read_dmac_config(struct pl330_dmac *pl330)
|
|
{
|
|
void __iomem *regs = pl330->base;
|
|
u32 val;
|
|
|
|
val = readl(regs + CRD) >> CRD_DATA_WIDTH_SHIFT;
|
|
val &= CRD_DATA_WIDTH_MASK;
|
|
pl330->pcfg.data_bus_width = 8 * (1 << val);
|
|
|
|
val = readl(regs + CRD) >> CRD_DATA_BUFF_SHIFT;
|
|
val &= CRD_DATA_BUFF_MASK;
|
|
pl330->pcfg.data_buf_dep = val + 1;
|
|
|
|
val = readl(regs + CR0) >> CR0_NUM_CHANS_SHIFT;
|
|
val &= CR0_NUM_CHANS_MASK;
|
|
val += 1;
|
|
pl330->pcfg.num_chan = val;
|
|
|
|
val = readl(regs + CR0);
|
|
if (val & CR0_PERIPH_REQ_SET) {
|
|
val = (val >> CR0_NUM_PERIPH_SHIFT) & CR0_NUM_PERIPH_MASK;
|
|
val += 1;
|
|
pl330->pcfg.num_peri = val;
|
|
pl330->pcfg.peri_ns = readl(regs + CR4);
|
|
} else {
|
|
pl330->pcfg.num_peri = 0;
|
|
}
|
|
|
|
val = readl(regs + CR0);
|
|
if (val & CR0_BOOT_MAN_NS)
|
|
pl330->pcfg.mode |= DMAC_MODE_NS;
|
|
else
|
|
pl330->pcfg.mode &= ~DMAC_MODE_NS;
|
|
|
|
val = readl(regs + CR0) >> CR0_NUM_EVENTS_SHIFT;
|
|
val &= CR0_NUM_EVENTS_MASK;
|
|
val += 1;
|
|
pl330->pcfg.num_events = val;
|
|
|
|
pl330->pcfg.irq_ns = readl(regs + CR3);
|
|
}
|
|
|
|
static inline void _reset_thread(struct pl330_thread *thrd)
|
|
{
|
|
struct pl330_dmac *pl330 = thrd->dmac;
|
|
|
|
thrd->req[0].mc_cpu = pl330->mcode_cpu
|
|
+ (thrd->id * pl330->mcbufsz);
|
|
thrd->req[0].mc_bus = pl330->mcode_bus
|
|
+ (thrd->id * pl330->mcbufsz);
|
|
thrd->req[0].desc = NULL;
|
|
|
|
thrd->req[1].mc_cpu = thrd->req[0].mc_cpu
|
|
+ pl330->mcbufsz / 2;
|
|
thrd->req[1].mc_bus = thrd->req[0].mc_bus
|
|
+ pl330->mcbufsz / 2;
|
|
thrd->req[1].desc = NULL;
|
|
|
|
thrd->req_running = -1;
|
|
}
|
|
|
|
static int dmac_alloc_threads(struct pl330_dmac *pl330)
|
|
{
|
|
int chans = pl330->pcfg.num_chan;
|
|
struct pl330_thread *thrd;
|
|
int i;
|
|
|
|
/* Allocate 1 Manager and 'chans' Channel threads */
|
|
pl330->channels = kzalloc((1 + chans) * sizeof(*thrd),
|
|
GFP_KERNEL);
|
|
if (!pl330->channels)
|
|
return -ENOMEM;
|
|
|
|
/* Init Channel threads */
|
|
for (i = 0; i < chans; i++) {
|
|
thrd = &pl330->channels[i];
|
|
thrd->id = i;
|
|
thrd->dmac = pl330;
|
|
_reset_thread(thrd);
|
|
thrd->free = true;
|
|
}
|
|
|
|
/* MANAGER is indexed at the end */
|
|
thrd = &pl330->channels[chans];
|
|
thrd->id = chans;
|
|
thrd->dmac = pl330;
|
|
thrd->free = false;
|
|
pl330->manager = thrd;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dmac_alloc_resources(struct pl330_dmac *pl330)
|
|
{
|
|
int chans = pl330->pcfg.num_chan;
|
|
int ret;
|
|
|
|
/*
|
|
* Alloc MicroCode buffer for 'chans' Channel threads.
|
|
* A channel's buffer offset is (Channel_Id * MCODE_BUFF_PERCHAN)
|
|
*/
|
|
pl330->mcode_cpu = dma_alloc_coherent(pl330->ddma.dev,
|
|
chans * pl330->mcbufsz,
|
|
&pl330->mcode_bus, GFP_KERNEL);
|
|
if (!pl330->mcode_cpu) {
|
|
dev_err(pl330->ddma.dev, "%s:%d Can't allocate memory!\n",
|
|
__func__, __LINE__);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
ret = dmac_alloc_threads(pl330);
|
|
if (ret) {
|
|
dev_err(pl330->ddma.dev, "%s:%d Can't to create channels for DMAC!\n",
|
|
__func__, __LINE__);
|
|
dma_free_coherent(pl330->ddma.dev,
|
|
chans * pl330->mcbufsz,
|
|
pl330->mcode_cpu, pl330->mcode_bus);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pl330_add(struct pl330_dmac *pl330)
|
|
{
|
|
void __iomem *regs;
|
|
int i, ret;
|
|
|
|
regs = pl330->base;
|
|
|
|
/* Check if we can handle this DMAC */
|
|
if ((pl330->pcfg.periph_id & 0xfffff) != PERIPH_ID_VAL) {
|
|
dev_err(pl330->ddma.dev, "PERIPH_ID 0x%x !\n",
|
|
pl330->pcfg.periph_id);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Read the configuration of the DMAC */
|
|
read_dmac_config(pl330);
|
|
|
|
if (pl330->pcfg.num_events == 0) {
|
|
dev_err(pl330->ddma.dev, "%s:%d Can't work without events!\n",
|
|
__func__, __LINE__);
|
|
return -EINVAL;
|
|
}
|
|
|
|
spin_lock_init(&pl330->lock);
|
|
|
|
INIT_LIST_HEAD(&pl330->req_done);
|
|
|
|
/* Use default MC buffer size if not provided */
|
|
if (!pl330->mcbufsz)
|
|
pl330->mcbufsz = MCODE_BUFF_PER_REQ * 2;
|
|
|
|
/* Mark all events as free */
|
|
for (i = 0; i < pl330->pcfg.num_events; i++)
|
|
pl330->events[i] = -1;
|
|
|
|
/* Allocate resources needed by the DMAC */
|
|
ret = dmac_alloc_resources(pl330);
|
|
if (ret) {
|
|
dev_err(pl330->ddma.dev, "Unable to create channels for DMAC\n");
|
|
return ret;
|
|
}
|
|
|
|
tasklet_init(&pl330->tasks, pl330_dotask, (unsigned long) pl330);
|
|
|
|
pl330->state = INIT;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dmac_free_threads(struct pl330_dmac *pl330)
|
|
{
|
|
struct pl330_thread *thrd;
|
|
int i;
|
|
|
|
/* Release Channel threads */
|
|
for (i = 0; i < pl330->pcfg.num_chan; i++) {
|
|
thrd = &pl330->channels[i];
|
|
pl330_release_channel(thrd);
|
|
}
|
|
|
|
/* Free memory */
|
|
kfree(pl330->channels);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void pl330_del(struct pl330_dmac *pl330)
|
|
{
|
|
pl330->state = UNINIT;
|
|
|
|
tasklet_kill(&pl330->tasks);
|
|
|
|
/* Free DMAC resources */
|
|
dmac_free_threads(pl330);
|
|
|
|
dma_free_coherent(pl330->ddma.dev,
|
|
pl330->pcfg.num_chan * pl330->mcbufsz, pl330->mcode_cpu,
|
|
pl330->mcode_bus);
|
|
}
|
|
|
|
/* forward declaration */
|
|
static struct amba_driver pl330_driver;
|
|
|
|
static inline struct dma_pl330_chan *
|
|
to_pchan(struct dma_chan *ch)
|
|
{
|
|
if (!ch)
|
|
return NULL;
|
|
|
|
return container_of(ch, struct dma_pl330_chan, chan);
|
|
}
|
|
|
|
static inline struct dma_pl330_desc *
|
|
to_desc(struct dma_async_tx_descriptor *tx)
|
|
{
|
|
return container_of(tx, struct dma_pl330_desc, txd);
|
|
}
|
|
|
|
static inline void fill_queue(struct dma_pl330_chan *pch)
|
|
{
|
|
struct dma_pl330_desc *desc;
|
|
int ret;
|
|
|
|
list_for_each_entry(desc, &pch->work_list, node) {
|
|
|
|
/* If already submitted */
|
|
if (desc->status == BUSY)
|
|
continue;
|
|
|
|
ret = pl330_submit_req(pch->thread, desc);
|
|
if (!ret) {
|
|
desc->status = BUSY;
|
|
} else if (ret == -EAGAIN) {
|
|
/* QFull or DMAC Dying */
|
|
break;
|
|
} else {
|
|
/* Unacceptable request */
|
|
desc->status = DONE;
|
|
dev_err(pch->dmac->ddma.dev, "%s:%d Bad Desc(%d)\n",
|
|
__func__, __LINE__, desc->txd.cookie);
|
|
tasklet_schedule(&pch->task);
|
|
}
|
|
}
|
|
}
|
|
|
|
static void pl330_tasklet(unsigned long data)
|
|
{
|
|
struct dma_pl330_chan *pch = (struct dma_pl330_chan *)data;
|
|
struct dma_pl330_desc *desc, *_dt;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&pch->lock, flags);
|
|
|
|
/* Pick up ripe tomatoes */
|
|
list_for_each_entry_safe(desc, _dt, &pch->work_list, node)
|
|
if (desc->status == DONE) {
|
|
if (!pch->cyclic)
|
|
dma_cookie_complete(&desc->txd);
|
|
list_move_tail(&desc->node, &pch->completed_list);
|
|
}
|
|
|
|
/* Try to submit a req imm. next to the last completed cookie */
|
|
fill_queue(pch);
|
|
|
|
/* Make sure the PL330 Channel thread is active */
|
|
spin_lock(&pch->thread->dmac->lock);
|
|
_start(pch->thread);
|
|
spin_unlock(&pch->thread->dmac->lock);
|
|
|
|
while (!list_empty(&pch->completed_list)) {
|
|
dma_async_tx_callback callback;
|
|
void *callback_param;
|
|
|
|
desc = list_first_entry(&pch->completed_list,
|
|
struct dma_pl330_desc, node);
|
|
|
|
callback = desc->txd.callback;
|
|
callback_param = desc->txd.callback_param;
|
|
|
|
if (pch->cyclic) {
|
|
desc->status = PREP;
|
|
list_move_tail(&desc->node, &pch->work_list);
|
|
} else {
|
|
desc->status = FREE;
|
|
list_move_tail(&desc->node, &pch->dmac->desc_pool);
|
|
}
|
|
|
|
dma_descriptor_unmap(&desc->txd);
|
|
|
|
if (callback) {
|
|
spin_unlock_irqrestore(&pch->lock, flags);
|
|
callback(callback_param);
|
|
spin_lock_irqsave(&pch->lock, flags);
|
|
}
|
|
}
|
|
spin_unlock_irqrestore(&pch->lock, flags);
|
|
}
|
|
|
|
bool pl330_filter(struct dma_chan *chan, void *param)
|
|
{
|
|
u8 *peri_id;
|
|
|
|
if (chan->device->dev->driver != &pl330_driver.drv)
|
|
return false;
|
|
|
|
peri_id = chan->private;
|
|
return *peri_id == (unsigned long)param;
|
|
}
|
|
EXPORT_SYMBOL(pl330_filter);
|
|
|
|
static struct dma_chan *of_dma_pl330_xlate(struct of_phandle_args *dma_spec,
|
|
struct of_dma *ofdma)
|
|
{
|
|
int count = dma_spec->args_count;
|
|
struct pl330_dmac *pl330 = ofdma->of_dma_data;
|
|
unsigned int chan_id;
|
|
|
|
if (!pl330)
|
|
return NULL;
|
|
|
|
if (count != 1)
|
|
return NULL;
|
|
|
|
chan_id = dma_spec->args[0];
|
|
if (chan_id >= pl330->num_peripherals)
|
|
return NULL;
|
|
|
|
return dma_get_slave_channel(&pl330->peripherals[chan_id].chan);
|
|
}
|
|
|
|
static int pl330_alloc_chan_resources(struct dma_chan *chan)
|
|
{
|
|
struct dma_pl330_chan *pch = to_pchan(chan);
|
|
struct pl330_dmac *pl330 = pch->dmac;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&pch->lock, flags);
|
|
|
|
dma_cookie_init(chan);
|
|
pch->cyclic = false;
|
|
|
|
pch->thread = pl330_request_channel(pl330);
|
|
if (!pch->thread) {
|
|
spin_unlock_irqrestore(&pch->lock, flags);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
tasklet_init(&pch->task, pl330_tasklet, (unsigned long) pch);
|
|
|
|
spin_unlock_irqrestore(&pch->lock, flags);
|
|
|
|
return 1;
|
|
}
|
|
|
|
static int pl330_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd, unsigned long arg)
|
|
{
|
|
struct dma_pl330_chan *pch = to_pchan(chan);
|
|
struct dma_pl330_desc *desc;
|
|
unsigned long flags;
|
|
struct pl330_dmac *pl330 = pch->dmac;
|
|
struct dma_slave_config *slave_config;
|
|
LIST_HEAD(list);
|
|
|
|
switch (cmd) {
|
|
case DMA_TERMINATE_ALL:
|
|
spin_lock_irqsave(&pch->lock, flags);
|
|
|
|
spin_lock(&pl330->lock);
|
|
_stop(pch->thread);
|
|
spin_unlock(&pl330->lock);
|
|
|
|
pch->thread->req[0].desc = NULL;
|
|
pch->thread->req[1].desc = NULL;
|
|
pch->thread->req_running = -1;
|
|
|
|
/* Mark all desc done */
|
|
list_for_each_entry(desc, &pch->submitted_list, node) {
|
|
desc->status = FREE;
|
|
dma_cookie_complete(&desc->txd);
|
|
}
|
|
|
|
list_for_each_entry(desc, &pch->work_list , node) {
|
|
desc->status = FREE;
|
|
dma_cookie_complete(&desc->txd);
|
|
}
|
|
|
|
list_for_each_entry(desc, &pch->completed_list , node) {
|
|
desc->status = FREE;
|
|
dma_cookie_complete(&desc->txd);
|
|
}
|
|
|
|
list_splice_tail_init(&pch->submitted_list, &pl330->desc_pool);
|
|
list_splice_tail_init(&pch->work_list, &pl330->desc_pool);
|
|
list_splice_tail_init(&pch->completed_list, &pl330->desc_pool);
|
|
spin_unlock_irqrestore(&pch->lock, flags);
|
|
break;
|
|
case DMA_SLAVE_CONFIG:
|
|
slave_config = (struct dma_slave_config *)arg;
|
|
|
|
if (slave_config->direction == DMA_MEM_TO_DEV) {
|
|
if (slave_config->dst_addr)
|
|
pch->fifo_addr = slave_config->dst_addr;
|
|
if (slave_config->dst_addr_width)
|
|
pch->burst_sz = __ffs(slave_config->dst_addr_width);
|
|
if (slave_config->dst_maxburst)
|
|
pch->burst_len = slave_config->dst_maxburst;
|
|
} else if (slave_config->direction == DMA_DEV_TO_MEM) {
|
|
if (slave_config->src_addr)
|
|
pch->fifo_addr = slave_config->src_addr;
|
|
if (slave_config->src_addr_width)
|
|
pch->burst_sz = __ffs(slave_config->src_addr_width);
|
|
if (slave_config->src_maxburst)
|
|
pch->burst_len = slave_config->src_maxburst;
|
|
}
|
|
break;
|
|
default:
|
|
dev_err(pch->dmac->ddma.dev, "Not supported command.\n");
|
|
return -ENXIO;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void pl330_free_chan_resources(struct dma_chan *chan)
|
|
{
|
|
struct dma_pl330_chan *pch = to_pchan(chan);
|
|
unsigned long flags;
|
|
|
|
tasklet_kill(&pch->task);
|
|
|
|
spin_lock_irqsave(&pch->lock, flags);
|
|
|
|
pl330_release_channel(pch->thread);
|
|
pch->thread = NULL;
|
|
|
|
if (pch->cyclic)
|
|
list_splice_tail_init(&pch->work_list, &pch->dmac->desc_pool);
|
|
|
|
spin_unlock_irqrestore(&pch->lock, flags);
|
|
}
|
|
|
|
static enum dma_status
|
|
pl330_tx_status(struct dma_chan *chan, dma_cookie_t cookie,
|
|
struct dma_tx_state *txstate)
|
|
{
|
|
return dma_cookie_status(chan, cookie, txstate);
|
|
}
|
|
|
|
static void pl330_issue_pending(struct dma_chan *chan)
|
|
{
|
|
struct dma_pl330_chan *pch = to_pchan(chan);
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&pch->lock, flags);
|
|
list_splice_tail_init(&pch->submitted_list, &pch->work_list);
|
|
spin_unlock_irqrestore(&pch->lock, flags);
|
|
|
|
pl330_tasklet((unsigned long)pch);
|
|
}
|
|
|
|
/*
|
|
* We returned the last one of the circular list of descriptor(s)
|
|
* from prep_xxx, so the argument to submit corresponds to the last
|
|
* descriptor of the list.
|
|
*/
|
|
static dma_cookie_t pl330_tx_submit(struct dma_async_tx_descriptor *tx)
|
|
{
|
|
struct dma_pl330_desc *desc, *last = to_desc(tx);
|
|
struct dma_pl330_chan *pch = to_pchan(tx->chan);
|
|
dma_cookie_t cookie;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&pch->lock, flags);
|
|
|
|
/* Assign cookies to all nodes */
|
|
while (!list_empty(&last->node)) {
|
|
desc = list_entry(last->node.next, struct dma_pl330_desc, node);
|
|
if (pch->cyclic) {
|
|
desc->txd.callback = last->txd.callback;
|
|
desc->txd.callback_param = last->txd.callback_param;
|
|
}
|
|
|
|
dma_cookie_assign(&desc->txd);
|
|
|
|
list_move_tail(&desc->node, &pch->submitted_list);
|
|
}
|
|
|
|
cookie = dma_cookie_assign(&last->txd);
|
|
list_add_tail(&last->node, &pch->submitted_list);
|
|
spin_unlock_irqrestore(&pch->lock, flags);
|
|
|
|
return cookie;
|
|
}
|
|
|
|
static inline void _init_desc(struct dma_pl330_desc *desc)
|
|
{
|
|
desc->rqcfg.swap = SWAP_NO;
|
|
desc->rqcfg.scctl = CCTRL0;
|
|
desc->rqcfg.dcctl = CCTRL0;
|
|
desc->txd.tx_submit = pl330_tx_submit;
|
|
|
|
INIT_LIST_HEAD(&desc->node);
|
|
}
|
|
|
|
/* Returns the number of descriptors added to the DMAC pool */
|
|
static int add_desc(struct pl330_dmac *pl330, gfp_t flg, int count)
|
|
{
|
|
struct dma_pl330_desc *desc;
|
|
unsigned long flags;
|
|
int i;
|
|
|
|
desc = kcalloc(count, sizeof(*desc), flg);
|
|
if (!desc)
|
|
return 0;
|
|
|
|
spin_lock_irqsave(&pl330->pool_lock, flags);
|
|
|
|
for (i = 0; i < count; i++) {
|
|
_init_desc(&desc[i]);
|
|
list_add_tail(&desc[i].node, &pl330->desc_pool);
|
|
}
|
|
|
|
spin_unlock_irqrestore(&pl330->pool_lock, flags);
|
|
|
|
return count;
|
|
}
|
|
|
|
static struct dma_pl330_desc *pluck_desc(struct pl330_dmac *pl330)
|
|
{
|
|
struct dma_pl330_desc *desc = NULL;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&pl330->pool_lock, flags);
|
|
|
|
if (!list_empty(&pl330->desc_pool)) {
|
|
desc = list_entry(pl330->desc_pool.next,
|
|
struct dma_pl330_desc, node);
|
|
|
|
list_del_init(&desc->node);
|
|
|
|
desc->status = PREP;
|
|
desc->txd.callback = NULL;
|
|
}
|
|
|
|
spin_unlock_irqrestore(&pl330->pool_lock, flags);
|
|
|
|
return desc;
|
|
}
|
|
|
|
static struct dma_pl330_desc *pl330_get_desc(struct dma_pl330_chan *pch)
|
|
{
|
|
struct pl330_dmac *pl330 = pch->dmac;
|
|
u8 *peri_id = pch->chan.private;
|
|
struct dma_pl330_desc *desc;
|
|
|
|
/* Pluck one desc from the pool of DMAC */
|
|
desc = pluck_desc(pl330);
|
|
|
|
/* If the DMAC pool is empty, alloc new */
|
|
if (!desc) {
|
|
if (!add_desc(pl330, GFP_ATOMIC, 1))
|
|
return NULL;
|
|
|
|
/* Try again */
|
|
desc = pluck_desc(pl330);
|
|
if (!desc) {
|
|
dev_err(pch->dmac->ddma.dev,
|
|
"%s:%d ALERT!\n", __func__, __LINE__);
|
|
return NULL;
|
|
}
|
|
}
|
|
|
|
/* Initialize the descriptor */
|
|
desc->pchan = pch;
|
|
desc->txd.cookie = 0;
|
|
async_tx_ack(&desc->txd);
|
|
|
|
desc->peri = peri_id ? pch->chan.chan_id : 0;
|
|
desc->rqcfg.pcfg = &pch->dmac->pcfg;
|
|
|
|
dma_async_tx_descriptor_init(&desc->txd, &pch->chan);
|
|
|
|
return desc;
|
|
}
|
|
|
|
static inline void fill_px(struct pl330_xfer *px,
|
|
dma_addr_t dst, dma_addr_t src, size_t len)
|
|
{
|
|
px->bytes = len;
|
|
px->dst_addr = dst;
|
|
px->src_addr = src;
|
|
}
|
|
|
|
static struct dma_pl330_desc *
|
|
__pl330_prep_dma_memcpy(struct dma_pl330_chan *pch, dma_addr_t dst,
|
|
dma_addr_t src, size_t len)
|
|
{
|
|
struct dma_pl330_desc *desc = pl330_get_desc(pch);
|
|
|
|
if (!desc) {
|
|
dev_err(pch->dmac->ddma.dev, "%s:%d Unable to fetch desc\n",
|
|
__func__, __LINE__);
|
|
return NULL;
|
|
}
|
|
|
|
/*
|
|
* Ideally we should lookout for reqs bigger than
|
|
* those that can be programmed with 256 bytes of
|
|
* MC buffer, but considering a req size is seldom
|
|
* going to be word-unaligned and more than 200MB,
|
|
* we take it easy.
|
|
* Also, should the limit is reached we'd rather
|
|
* have the platform increase MC buffer size than
|
|
* complicating this API driver.
|
|
*/
|
|
fill_px(&desc->px, dst, src, len);
|
|
|
|
return desc;
|
|
}
|
|
|
|
/* Call after fixing burst size */
|
|
static inline int get_burst_len(struct dma_pl330_desc *desc, size_t len)
|
|
{
|
|
struct dma_pl330_chan *pch = desc->pchan;
|
|
struct pl330_dmac *pl330 = pch->dmac;
|
|
int burst_len;
|
|
|
|
burst_len = pl330->pcfg.data_bus_width / 8;
|
|
burst_len *= pl330->pcfg.data_buf_dep;
|
|
burst_len >>= desc->rqcfg.brst_size;
|
|
|
|
/* src/dst_burst_len can't be more than 16 */
|
|
if (burst_len > 16)
|
|
burst_len = 16;
|
|
|
|
while (burst_len > 1) {
|
|
if (!(len % (burst_len << desc->rqcfg.brst_size)))
|
|
break;
|
|
burst_len--;
|
|
}
|
|
|
|
return burst_len;
|
|
}
|
|
|
|
static struct dma_async_tx_descriptor *pl330_prep_dma_cyclic(
|
|
struct dma_chan *chan, dma_addr_t dma_addr, size_t len,
|
|
size_t period_len, enum dma_transfer_direction direction,
|
|
unsigned long flags)
|
|
{
|
|
struct dma_pl330_desc *desc = NULL, *first = NULL;
|
|
struct dma_pl330_chan *pch = to_pchan(chan);
|
|
struct pl330_dmac *pl330 = pch->dmac;
|
|
unsigned int i;
|
|
dma_addr_t dst;
|
|
dma_addr_t src;
|
|
|
|
if (len % period_len != 0)
|
|
return NULL;
|
|
|
|
if (!is_slave_direction(direction)) {
|
|
dev_err(pch->dmac->ddma.dev, "%s:%d Invalid dma direction\n",
|
|
__func__, __LINE__);
|
|
return NULL;
|
|
}
|
|
|
|
for (i = 0; i < len / period_len; i++) {
|
|
desc = pl330_get_desc(pch);
|
|
if (!desc) {
|
|
dev_err(pch->dmac->ddma.dev, "%s:%d Unable to fetch desc\n",
|
|
__func__, __LINE__);
|
|
|
|
if (!first)
|
|
return NULL;
|
|
|
|
spin_lock_irqsave(&pl330->pool_lock, flags);
|
|
|
|
while (!list_empty(&first->node)) {
|
|
desc = list_entry(first->node.next,
|
|
struct dma_pl330_desc, node);
|
|
list_move_tail(&desc->node, &pl330->desc_pool);
|
|
}
|
|
|
|
list_move_tail(&first->node, &pl330->desc_pool);
|
|
|
|
spin_unlock_irqrestore(&pl330->pool_lock, flags);
|
|
|
|
return NULL;
|
|
}
|
|
|
|
switch (direction) {
|
|
case DMA_MEM_TO_DEV:
|
|
desc->rqcfg.src_inc = 1;
|
|
desc->rqcfg.dst_inc = 0;
|
|
src = dma_addr;
|
|
dst = pch->fifo_addr;
|
|
break;
|
|
case DMA_DEV_TO_MEM:
|
|
desc->rqcfg.src_inc = 0;
|
|
desc->rqcfg.dst_inc = 1;
|
|
src = pch->fifo_addr;
|
|
dst = dma_addr;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
desc->rqtype = direction;
|
|
desc->rqcfg.brst_size = pch->burst_sz;
|
|
desc->rqcfg.brst_len = 1;
|
|
fill_px(&desc->px, dst, src, period_len);
|
|
|
|
if (!first)
|
|
first = desc;
|
|
else
|
|
list_add_tail(&desc->node, &first->node);
|
|
|
|
dma_addr += period_len;
|
|
}
|
|
|
|
if (!desc)
|
|
return NULL;
|
|
|
|
pch->cyclic = true;
|
|
desc->txd.flags = flags;
|
|
|
|
return &desc->txd;
|
|
}
|
|
|
|
static struct dma_async_tx_descriptor *
|
|
pl330_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dst,
|
|
dma_addr_t src, size_t len, unsigned long flags)
|
|
{
|
|
struct dma_pl330_desc *desc;
|
|
struct dma_pl330_chan *pch = to_pchan(chan);
|
|
struct pl330_dmac *pl330 = pch->dmac;
|
|
int burst;
|
|
|
|
if (unlikely(!pch || !len))
|
|
return NULL;
|
|
|
|
desc = __pl330_prep_dma_memcpy(pch, dst, src, len);
|
|
if (!desc)
|
|
return NULL;
|
|
|
|
desc->rqcfg.src_inc = 1;
|
|
desc->rqcfg.dst_inc = 1;
|
|
desc->rqtype = DMA_MEM_TO_MEM;
|
|
|
|
/* Select max possible burst size */
|
|
burst = pl330->pcfg.data_bus_width / 8;
|
|
|
|
while (burst > 1) {
|
|
if (!(len % burst))
|
|
break;
|
|
burst /= 2;
|
|
}
|
|
|
|
desc->rqcfg.brst_size = 0;
|
|
while (burst != (1 << desc->rqcfg.brst_size))
|
|
desc->rqcfg.brst_size++;
|
|
|
|
desc->rqcfg.brst_len = get_burst_len(desc, len);
|
|
|
|
desc->txd.flags = flags;
|
|
|
|
return &desc->txd;
|
|
}
|
|
|
|
static void __pl330_giveback_desc(struct pl330_dmac *pl330,
|
|
struct dma_pl330_desc *first)
|
|
{
|
|
unsigned long flags;
|
|
struct dma_pl330_desc *desc;
|
|
|
|
if (!first)
|
|
return;
|
|
|
|
spin_lock_irqsave(&pl330->pool_lock, flags);
|
|
|
|
while (!list_empty(&first->node)) {
|
|
desc = list_entry(first->node.next,
|
|
struct dma_pl330_desc, node);
|
|
list_move_tail(&desc->node, &pl330->desc_pool);
|
|
}
|
|
|
|
list_move_tail(&first->node, &pl330->desc_pool);
|
|
|
|
spin_unlock_irqrestore(&pl330->pool_lock, flags);
|
|
}
|
|
|
|
static struct dma_async_tx_descriptor *
|
|
pl330_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
|
|
unsigned int sg_len, enum dma_transfer_direction direction,
|
|
unsigned long flg, void *context)
|
|
{
|
|
struct dma_pl330_desc *first, *desc = NULL;
|
|
struct dma_pl330_chan *pch = to_pchan(chan);
|
|
struct scatterlist *sg;
|
|
int i;
|
|
dma_addr_t addr;
|
|
|
|
if (unlikely(!pch || !sgl || !sg_len))
|
|
return NULL;
|
|
|
|
addr = pch->fifo_addr;
|
|
|
|
first = NULL;
|
|
|
|
for_each_sg(sgl, sg, sg_len, i) {
|
|
|
|
desc = pl330_get_desc(pch);
|
|
if (!desc) {
|
|
struct pl330_dmac *pl330 = pch->dmac;
|
|
|
|
dev_err(pch->dmac->ddma.dev,
|
|
"%s:%d Unable to fetch desc\n",
|
|
__func__, __LINE__);
|
|
__pl330_giveback_desc(pl330, first);
|
|
|
|
return NULL;
|
|
}
|
|
|
|
if (!first)
|
|
first = desc;
|
|
else
|
|
list_add_tail(&desc->node, &first->node);
|
|
|
|
if (direction == DMA_MEM_TO_DEV) {
|
|
desc->rqcfg.src_inc = 1;
|
|
desc->rqcfg.dst_inc = 0;
|
|
fill_px(&desc->px,
|
|
addr, sg_dma_address(sg), sg_dma_len(sg));
|
|
} else {
|
|
desc->rqcfg.src_inc = 0;
|
|
desc->rqcfg.dst_inc = 1;
|
|
fill_px(&desc->px,
|
|
sg_dma_address(sg), addr, sg_dma_len(sg));
|
|
}
|
|
|
|
desc->rqcfg.brst_size = pch->burst_sz;
|
|
desc->rqcfg.brst_len = 1;
|
|
desc->rqtype = direction;
|
|
}
|
|
|
|
/* Return the last desc in the chain */
|
|
desc->txd.flags = flg;
|
|
return &desc->txd;
|
|
}
|
|
|
|
static irqreturn_t pl330_irq_handler(int irq, void *data)
|
|
{
|
|
if (pl330_update(data))
|
|
return IRQ_HANDLED;
|
|
else
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
#define PL330_DMA_BUSWIDTHS \
|
|
BIT(DMA_SLAVE_BUSWIDTH_UNDEFINED) | \
|
|
BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) | \
|
|
BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) | \
|
|
BIT(DMA_SLAVE_BUSWIDTH_4_BYTES) | \
|
|
BIT(DMA_SLAVE_BUSWIDTH_8_BYTES)
|
|
|
|
static int pl330_dma_device_slave_caps(struct dma_chan *dchan,
|
|
struct dma_slave_caps *caps)
|
|
{
|
|
caps->src_addr_widths = PL330_DMA_BUSWIDTHS;
|
|
caps->dstn_addr_widths = PL330_DMA_BUSWIDTHS;
|
|
caps->directions = BIT(DMA_DEV_TO_MEM) | BIT(DMA_MEM_TO_DEV);
|
|
caps->cmd_pause = false;
|
|
caps->cmd_terminate = true;
|
|
caps->residue_granularity = DMA_RESIDUE_GRANULARITY_DESCRIPTOR;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
pl330_probe(struct amba_device *adev, const struct amba_id *id)
|
|
{
|
|
struct dma_pl330_platdata *pdat;
|
|
struct pl330_config *pcfg;
|
|
struct pl330_dmac *pl330;
|
|
struct dma_pl330_chan *pch, *_p;
|
|
struct dma_device *pd;
|
|
struct resource *res;
|
|
int i, ret, irq;
|
|
int num_chan;
|
|
|
|
pdat = dev_get_platdata(&adev->dev);
|
|
|
|
ret = dma_set_mask_and_coherent(&adev->dev, DMA_BIT_MASK(32));
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Allocate a new DMAC and its Channels */
|
|
pl330 = devm_kzalloc(&adev->dev, sizeof(*pl330), GFP_KERNEL);
|
|
if (!pl330) {
|
|
dev_err(&adev->dev, "unable to allocate mem\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
pl330->mcbufsz = pdat ? pdat->mcbuf_sz : 0;
|
|
|
|
res = &adev->res;
|
|
pl330->base = devm_ioremap_resource(&adev->dev, res);
|
|
if (IS_ERR(pl330->base))
|
|
return PTR_ERR(pl330->base);
|
|
|
|
amba_set_drvdata(adev, pl330);
|
|
|
|
for (i = 0; i < AMBA_NR_IRQS; i++) {
|
|
irq = adev->irq[i];
|
|
if (irq) {
|
|
ret = devm_request_irq(&adev->dev, irq,
|
|
pl330_irq_handler, 0,
|
|
dev_name(&adev->dev), pl330);
|
|
if (ret)
|
|
return ret;
|
|
} else {
|
|
break;
|
|
}
|
|
}
|
|
|
|
pcfg = &pl330->pcfg;
|
|
|
|
pcfg->periph_id = adev->periphid;
|
|
ret = pl330_add(pl330);
|
|
if (ret)
|
|
return ret;
|
|
|
|
INIT_LIST_HEAD(&pl330->desc_pool);
|
|
spin_lock_init(&pl330->pool_lock);
|
|
|
|
/* Create a descriptor pool of default size */
|
|
if (!add_desc(pl330, GFP_KERNEL, NR_DEFAULT_DESC))
|
|
dev_warn(&adev->dev, "unable to allocate desc\n");
|
|
|
|
pd = &pl330->ddma;
|
|
INIT_LIST_HEAD(&pd->channels);
|
|
|
|
/* Initialize channel parameters */
|
|
if (pdat)
|
|
num_chan = max_t(int, pdat->nr_valid_peri, pcfg->num_chan);
|
|
else
|
|
num_chan = max_t(int, pcfg->num_peri, pcfg->num_chan);
|
|
|
|
pl330->num_peripherals = num_chan;
|
|
|
|
pl330->peripherals = kzalloc(num_chan * sizeof(*pch), GFP_KERNEL);
|
|
if (!pl330->peripherals) {
|
|
ret = -ENOMEM;
|
|
dev_err(&adev->dev, "unable to allocate pl330->peripherals\n");
|
|
goto probe_err2;
|
|
}
|
|
|
|
for (i = 0; i < num_chan; i++) {
|
|
pch = &pl330->peripherals[i];
|
|
if (!adev->dev.of_node)
|
|
pch->chan.private = pdat ? &pdat->peri_id[i] : NULL;
|
|
else
|
|
pch->chan.private = adev->dev.of_node;
|
|
|
|
INIT_LIST_HEAD(&pch->submitted_list);
|
|
INIT_LIST_HEAD(&pch->work_list);
|
|
INIT_LIST_HEAD(&pch->completed_list);
|
|
spin_lock_init(&pch->lock);
|
|
pch->thread = NULL;
|
|
pch->chan.device = pd;
|
|
pch->dmac = pl330;
|
|
|
|
/* Add the channel to the DMAC list */
|
|
list_add_tail(&pch->chan.device_node, &pd->channels);
|
|
}
|
|
|
|
pd->dev = &adev->dev;
|
|
if (pdat) {
|
|
pd->cap_mask = pdat->cap_mask;
|
|
} else {
|
|
dma_cap_set(DMA_MEMCPY, pd->cap_mask);
|
|
if (pcfg->num_peri) {
|
|
dma_cap_set(DMA_SLAVE, pd->cap_mask);
|
|
dma_cap_set(DMA_CYCLIC, pd->cap_mask);
|
|
dma_cap_set(DMA_PRIVATE, pd->cap_mask);
|
|
}
|
|
}
|
|
|
|
pd->device_alloc_chan_resources = pl330_alloc_chan_resources;
|
|
pd->device_free_chan_resources = pl330_free_chan_resources;
|
|
pd->device_prep_dma_memcpy = pl330_prep_dma_memcpy;
|
|
pd->device_prep_dma_cyclic = pl330_prep_dma_cyclic;
|
|
pd->device_tx_status = pl330_tx_status;
|
|
pd->device_prep_slave_sg = pl330_prep_slave_sg;
|
|
pd->device_control = pl330_control;
|
|
pd->device_issue_pending = pl330_issue_pending;
|
|
pd->device_slave_caps = pl330_dma_device_slave_caps;
|
|
|
|
ret = dma_async_device_register(pd);
|
|
if (ret) {
|
|
dev_err(&adev->dev, "unable to register DMAC\n");
|
|
goto probe_err3;
|
|
}
|
|
|
|
if (adev->dev.of_node) {
|
|
ret = of_dma_controller_register(adev->dev.of_node,
|
|
of_dma_pl330_xlate, pl330);
|
|
if (ret) {
|
|
dev_err(&adev->dev,
|
|
"unable to register DMA to the generic DT DMA helpers\n");
|
|
}
|
|
}
|
|
|
|
adev->dev.dma_parms = &pl330->dma_parms;
|
|
|
|
/*
|
|
* This is the limit for transfers with a buswidth of 1, larger
|
|
* buswidths will have larger limits.
|
|
*/
|
|
ret = dma_set_max_seg_size(&adev->dev, 1900800);
|
|
if (ret)
|
|
dev_err(&adev->dev, "unable to set the seg size\n");
|
|
|
|
|
|
dev_info(&adev->dev,
|
|
"Loaded driver for PL330 DMAC-%d\n", adev->periphid);
|
|
dev_info(&adev->dev,
|
|
"\tDBUFF-%ux%ubytes Num_Chans-%u Num_Peri-%u Num_Events-%u\n",
|
|
pcfg->data_buf_dep, pcfg->data_bus_width / 8, pcfg->num_chan,
|
|
pcfg->num_peri, pcfg->num_events);
|
|
|
|
return 0;
|
|
probe_err3:
|
|
/* Idle the DMAC */
|
|
list_for_each_entry_safe(pch, _p, &pl330->ddma.channels,
|
|
chan.device_node) {
|
|
|
|
/* Remove the channel */
|
|
list_del(&pch->chan.device_node);
|
|
|
|
/* Flush the channel */
|
|
if (pch->thread) {
|
|
pl330_control(&pch->chan, DMA_TERMINATE_ALL, 0);
|
|
pl330_free_chan_resources(&pch->chan);
|
|
}
|
|
}
|
|
probe_err2:
|
|
pl330_del(pl330);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int pl330_remove(struct amba_device *adev)
|
|
{
|
|
struct pl330_dmac *pl330 = amba_get_drvdata(adev);
|
|
struct dma_pl330_chan *pch, *_p;
|
|
|
|
if (adev->dev.of_node)
|
|
of_dma_controller_free(adev->dev.of_node);
|
|
|
|
dma_async_device_unregister(&pl330->ddma);
|
|
|
|
/* Idle the DMAC */
|
|
list_for_each_entry_safe(pch, _p, &pl330->ddma.channels,
|
|
chan.device_node) {
|
|
|
|
/* Remove the channel */
|
|
list_del(&pch->chan.device_node);
|
|
|
|
/* Flush the channel */
|
|
if (pch->thread) {
|
|
pl330_control(&pch->chan, DMA_TERMINATE_ALL, 0);
|
|
pl330_free_chan_resources(&pch->chan);
|
|
}
|
|
}
|
|
|
|
pl330_del(pl330);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct amba_id pl330_ids[] = {
|
|
{
|
|
.id = 0x00041330,
|
|
.mask = 0x000fffff,
|
|
},
|
|
{ 0, 0 },
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(amba, pl330_ids);
|
|
|
|
static struct amba_driver pl330_driver = {
|
|
.drv = {
|
|
.owner = THIS_MODULE,
|
|
.name = "dma-pl330",
|
|
},
|
|
.id_table = pl330_ids,
|
|
.probe = pl330_probe,
|
|
.remove = pl330_remove,
|
|
};
|
|
|
|
module_amba_driver(pl330_driver);
|
|
|
|
MODULE_AUTHOR("Jaswinder Singh <jassi.brar@samsung.com>");
|
|
MODULE_DESCRIPTION("API Driver for PL330 DMAC");
|
|
MODULE_LICENSE("GPL");
|