linux/Documentation/hwmon/sht4x.rst
Randy Dunlap 276281b8e8 hwmon: sht4x: update Documentation for Malformed table
Make top and bottom border lines match.

Documentation/hwmon/sht4x.rst:42: WARNING: Malformed table.
Text in column margin in table line 4.

Fixes: 505c254937 ("hwmon: Add sht4x Temperature and Humidity Sensor Driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Navin Sankar Velliangiri <navin@linumiz.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: linux-hwmon@vger.kernel.org
Link: https://lore.kernel.org/r/20210727232054.7426-1-rdunlap@infradead.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-08-17 14:54:14 -07:00

46 lines
1.3 KiB
ReStructuredText

.. SPDX-License-Identifier: GPL-2.0
Kernel driver sht4x
===================
Supported Chips:
* Sensirion SHT4X
Prefix: 'sht4x'
Addresses scanned: None
Datasheet:
English: https://www.sensirion.com/fileadmin/user_upload/customers/sensirion/Dokumente/2_Humidity_Sensors/Datasheets/Sensirion_Humidity_Sensors_SHT4x_Datasheet.pdf
Author: Navin Sankar Velliangiri <navin@linumiz.com>
Description
-----------
This driver implements support for the Sensirion SHT4x chip, a humidity
and temperature sensor. Temperature is measured in degree celsius, relative
humidity is expressed as a percentage. In sysfs interface, all values are
scaled by 1000, i.e. the value for 31.5 degrees celsius is 31500.
Usage Notes
-----------
The device communicates with the I2C protocol. Sensors can have the I2C
address 0x44. See Documentation/i2c/instantiating-devices.rst for methods
to instantiate the device.
Sysfs entries
-------------
=============== ============================================
temp1_input Measured temperature in millidegrees Celcius
humidity1_input Measured humidity in %H
update_interval The minimum interval for polling the sensor,
in milliseconds. Writable. Must be at least
2000.
=============== ============================================