linux/drivers/net/can/sun4i_can.c
Marc Kleine-Budde 9420e1d495 can: dev: can_get_echo_skb(): extend to return can frame length
In order to implement byte queue limits (bql) in CAN drivers, the length of the
CAN frame needs to be passed into the networking stack after queueing and after
transmission completion.

To avoid to calculate this length twice, extend can_get_echo_skb() to return
that value. Convert all users of this function, too.

Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/r/20210111141930.693847-14-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-01-14 08:43:43 +01:00

860 lines
24 KiB
C

/*
* sun4i_can.c - CAN bus controller driver for Allwinner SUN4I&SUN7I based SoCs
*
* Copyright (C) 2013 Peter Chen
* Copyright (C) 2015 Gerhard Bertelsmann
* All rights reserved.
*
* Parts of this software are based on (derived from) the SJA1000 code by:
* Copyright (C) 2014 Oliver Hartkopp <oliver.hartkopp@volkswagen.de>
* Copyright (C) 2007 Wolfgang Grandegger <wg@grandegger.com>
* Copyright (C) 2002-2007 Volkswagen Group Electronic Research
* Copyright (C) 2003 Matthias Brukner, Trajet Gmbh, Rebenring 33,
* 38106 Braunschweig, GERMANY
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of Volkswagen nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* Alternatively, provided that this notice is retained in full, this
* software may be distributed under the terms of the GNU General
* Public License ("GPL") version 2, in which case the provisions of the
* GPL apply INSTEAD OF those given above.
*
* The provided data structures and external interfaces from this code
* are not restricted to be used by modules with a GPL compatible license.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
* DAMAGE.
*
*/
#include <linux/netdevice.h>
#include <linux/can.h>
#include <linux/can/dev.h>
#include <linux/can/error.h>
#include <linux/can/led.h>
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/platform_device.h>
#define DRV_NAME "sun4i_can"
/* Registers address (physical base address 0x01C2BC00) */
#define SUN4I_REG_MSEL_ADDR 0x0000 /* CAN Mode Select */
#define SUN4I_REG_CMD_ADDR 0x0004 /* CAN Command */
#define SUN4I_REG_STA_ADDR 0x0008 /* CAN Status */
#define SUN4I_REG_INT_ADDR 0x000c /* CAN Interrupt Flag */
#define SUN4I_REG_INTEN_ADDR 0x0010 /* CAN Interrupt Enable */
#define SUN4I_REG_BTIME_ADDR 0x0014 /* CAN Bus Timing 0 */
#define SUN4I_REG_TEWL_ADDR 0x0018 /* CAN Tx Error Warning Limit */
#define SUN4I_REG_ERRC_ADDR 0x001c /* CAN Error Counter */
#define SUN4I_REG_RMCNT_ADDR 0x0020 /* CAN Receive Message Counter */
#define SUN4I_REG_RBUFSA_ADDR 0x0024 /* CAN Receive Buffer Start Address */
#define SUN4I_REG_BUF0_ADDR 0x0040 /* CAN Tx/Rx Buffer 0 */
#define SUN4I_REG_BUF1_ADDR 0x0044 /* CAN Tx/Rx Buffer 1 */
#define SUN4I_REG_BUF2_ADDR 0x0048 /* CAN Tx/Rx Buffer 2 */
#define SUN4I_REG_BUF3_ADDR 0x004c /* CAN Tx/Rx Buffer 3 */
#define SUN4I_REG_BUF4_ADDR 0x0050 /* CAN Tx/Rx Buffer 4 */
#define SUN4I_REG_BUF5_ADDR 0x0054 /* CAN Tx/Rx Buffer 5 */
#define SUN4I_REG_BUF6_ADDR 0x0058 /* CAN Tx/Rx Buffer 6 */
#define SUN4I_REG_BUF7_ADDR 0x005c /* CAN Tx/Rx Buffer 7 */
#define SUN4I_REG_BUF8_ADDR 0x0060 /* CAN Tx/Rx Buffer 8 */
#define SUN4I_REG_BUF9_ADDR 0x0064 /* CAN Tx/Rx Buffer 9 */
#define SUN4I_REG_BUF10_ADDR 0x0068 /* CAN Tx/Rx Buffer 10 */
#define SUN4I_REG_BUF11_ADDR 0x006c /* CAN Tx/Rx Buffer 11 */
#define SUN4I_REG_BUF12_ADDR 0x0070 /* CAN Tx/Rx Buffer 12 */
#define SUN4I_REG_ACPC_ADDR 0x0040 /* CAN Acceptance Code 0 */
#define SUN4I_REG_ACPM_ADDR 0x0044 /* CAN Acceptance Mask 0 */
#define SUN4I_REG_RBUF_RBACK_START_ADDR 0x0180 /* CAN transmit buffer start */
#define SUN4I_REG_RBUF_RBACK_END_ADDR 0x01b0 /* CAN transmit buffer end */
/* Controller Register Description */
/* mode select register (r/w)
* offset:0x0000 default:0x0000_0001
*/
#define SUN4I_MSEL_SLEEP_MODE (0x01 << 4) /* write in reset mode */
#define SUN4I_MSEL_WAKE_UP (0x00 << 4)
#define SUN4I_MSEL_SINGLE_FILTER (0x01 << 3) /* write in reset mode */
#define SUN4I_MSEL_DUAL_FILTERS (0x00 << 3)
#define SUN4I_MSEL_LOOPBACK_MODE BIT(2)
#define SUN4I_MSEL_LISTEN_ONLY_MODE BIT(1)
#define SUN4I_MSEL_RESET_MODE BIT(0)
/* command register (w)
* offset:0x0004 default:0x0000_0000
*/
#define SUN4I_CMD_BUS_OFF_REQ BIT(5)
#define SUN4I_CMD_SELF_RCV_REQ BIT(4)
#define SUN4I_CMD_CLEAR_OR_FLAG BIT(3)
#define SUN4I_CMD_RELEASE_RBUF BIT(2)
#define SUN4I_CMD_ABORT_REQ BIT(1)
#define SUN4I_CMD_TRANS_REQ BIT(0)
/* status register (r)
* offset:0x0008 default:0x0000_003c
*/
#define SUN4I_STA_BIT_ERR (0x00 << 22)
#define SUN4I_STA_FORM_ERR (0x01 << 22)
#define SUN4I_STA_STUFF_ERR (0x02 << 22)
#define SUN4I_STA_OTHER_ERR (0x03 << 22)
#define SUN4I_STA_MASK_ERR (0x03 << 22)
#define SUN4I_STA_ERR_DIR BIT(21)
#define SUN4I_STA_ERR_SEG_CODE (0x1f << 16)
#define SUN4I_STA_START (0x03 << 16)
#define SUN4I_STA_ID28_21 (0x02 << 16)
#define SUN4I_STA_ID20_18 (0x06 << 16)
#define SUN4I_STA_SRTR (0x04 << 16)
#define SUN4I_STA_IDE (0x05 << 16)
#define SUN4I_STA_ID17_13 (0x07 << 16)
#define SUN4I_STA_ID12_5 (0x0f << 16)
#define SUN4I_STA_ID4_0 (0x0e << 16)
#define SUN4I_STA_RTR (0x0c << 16)
#define SUN4I_STA_RB1 (0x0d << 16)
#define SUN4I_STA_RB0 (0x09 << 16)
#define SUN4I_STA_DLEN (0x0b << 16)
#define SUN4I_STA_DATA_FIELD (0x0a << 16)
#define SUN4I_STA_CRC_SEQUENCE (0x08 << 16)
#define SUN4I_STA_CRC_DELIMITER (0x18 << 16)
#define SUN4I_STA_ACK (0x19 << 16)
#define SUN4I_STA_ACK_DELIMITER (0x1b << 16)
#define SUN4I_STA_END (0x1a << 16)
#define SUN4I_STA_INTERMISSION (0x12 << 16)
#define SUN4I_STA_ACTIVE_ERROR (0x11 << 16)
#define SUN4I_STA_PASSIVE_ERROR (0x16 << 16)
#define SUN4I_STA_TOLERATE_DOMINANT_BITS (0x13 << 16)
#define SUN4I_STA_ERROR_DELIMITER (0x17 << 16)
#define SUN4I_STA_OVERLOAD (0x1c << 16)
#define SUN4I_STA_BUS_OFF BIT(7)
#define SUN4I_STA_ERR_STA BIT(6)
#define SUN4I_STA_TRANS_BUSY BIT(5)
#define SUN4I_STA_RCV_BUSY BIT(4)
#define SUN4I_STA_TRANS_OVER BIT(3)
#define SUN4I_STA_TBUF_RDY BIT(2)
#define SUN4I_STA_DATA_ORUN BIT(1)
#define SUN4I_STA_RBUF_RDY BIT(0)
/* interrupt register (r)
* offset:0x000c default:0x0000_0000
*/
#define SUN4I_INT_BUS_ERR BIT(7)
#define SUN4I_INT_ARB_LOST BIT(6)
#define SUN4I_INT_ERR_PASSIVE BIT(5)
#define SUN4I_INT_WAKEUP BIT(4)
#define SUN4I_INT_DATA_OR BIT(3)
#define SUN4I_INT_ERR_WRN BIT(2)
#define SUN4I_INT_TBUF_VLD BIT(1)
#define SUN4I_INT_RBUF_VLD BIT(0)
/* interrupt enable register (r/w)
* offset:0x0010 default:0x0000_0000
*/
#define SUN4I_INTEN_BERR BIT(7)
#define SUN4I_INTEN_ARB_LOST BIT(6)
#define SUN4I_INTEN_ERR_PASSIVE BIT(5)
#define SUN4I_INTEN_WAKEUP BIT(4)
#define SUN4I_INTEN_OR BIT(3)
#define SUN4I_INTEN_ERR_WRN BIT(2)
#define SUN4I_INTEN_TX BIT(1)
#define SUN4I_INTEN_RX BIT(0)
/* error code */
#define SUN4I_ERR_INRCV (0x1 << 5)
#define SUN4I_ERR_INTRANS (0x0 << 5)
/* filter mode */
#define SUN4I_FILTER_CLOSE 0
#define SUN4I_SINGLE_FLTER_MODE 1
#define SUN4I_DUAL_FILTER_MODE 2
/* message buffer flags */
#define SUN4I_MSG_EFF_FLAG BIT(7)
#define SUN4I_MSG_RTR_FLAG BIT(6)
/* max. number of interrupts handled in ISR */
#define SUN4I_CAN_MAX_IRQ 20
#define SUN4I_MODE_MAX_RETRIES 100
struct sun4ican_priv {
struct can_priv can;
void __iomem *base;
struct clk *clk;
spinlock_t cmdreg_lock; /* lock for concurrent cmd register writes */
};
static const struct can_bittiming_const sun4ican_bittiming_const = {
.name = DRV_NAME,
.tseg1_min = 1,
.tseg1_max = 16,
.tseg2_min = 1,
.tseg2_max = 8,
.sjw_max = 4,
.brp_min = 1,
.brp_max = 64,
.brp_inc = 1,
};
static void sun4i_can_write_cmdreg(struct sun4ican_priv *priv, u8 val)
{
unsigned long flags;
spin_lock_irqsave(&priv->cmdreg_lock, flags);
writel(val, priv->base + SUN4I_REG_CMD_ADDR);
spin_unlock_irqrestore(&priv->cmdreg_lock, flags);
}
static int set_normal_mode(struct net_device *dev)
{
struct sun4ican_priv *priv = netdev_priv(dev);
int retry = SUN4I_MODE_MAX_RETRIES;
u32 mod_reg_val = 0;
do {
mod_reg_val = readl(priv->base + SUN4I_REG_MSEL_ADDR);
mod_reg_val &= ~SUN4I_MSEL_RESET_MODE;
writel(mod_reg_val, priv->base + SUN4I_REG_MSEL_ADDR);
} while (retry-- && (mod_reg_val & SUN4I_MSEL_RESET_MODE));
if (readl(priv->base + SUN4I_REG_MSEL_ADDR) & SUN4I_MSEL_RESET_MODE) {
netdev_err(dev,
"setting controller into normal mode failed!\n");
return -ETIMEDOUT;
}
return 0;
}
static int set_reset_mode(struct net_device *dev)
{
struct sun4ican_priv *priv = netdev_priv(dev);
int retry = SUN4I_MODE_MAX_RETRIES;
u32 mod_reg_val = 0;
do {
mod_reg_val = readl(priv->base + SUN4I_REG_MSEL_ADDR);
mod_reg_val |= SUN4I_MSEL_RESET_MODE;
writel(mod_reg_val, priv->base + SUN4I_REG_MSEL_ADDR);
} while (retry-- && !(mod_reg_val & SUN4I_MSEL_RESET_MODE));
if (!(readl(priv->base + SUN4I_REG_MSEL_ADDR) &
SUN4I_MSEL_RESET_MODE)) {
netdev_err(dev, "setting controller into reset mode failed!\n");
return -ETIMEDOUT;
}
return 0;
}
/* bittiming is called in reset_mode only */
static int sun4ican_set_bittiming(struct net_device *dev)
{
struct sun4ican_priv *priv = netdev_priv(dev);
struct can_bittiming *bt = &priv->can.bittiming;
u32 cfg;
cfg = ((bt->brp - 1) & 0x3FF) |
(((bt->sjw - 1) & 0x3) << 14) |
(((bt->prop_seg + bt->phase_seg1 - 1) & 0xf) << 16) |
(((bt->phase_seg2 - 1) & 0x7) << 20);
if (priv->can.ctrlmode & CAN_CTRLMODE_3_SAMPLES)
cfg |= 0x800000;
netdev_dbg(dev, "setting BITTIMING=0x%08x\n", cfg);
writel(cfg, priv->base + SUN4I_REG_BTIME_ADDR);
return 0;
}
static int sun4ican_get_berr_counter(const struct net_device *dev,
struct can_berr_counter *bec)
{
struct sun4ican_priv *priv = netdev_priv(dev);
u32 errors;
int err;
err = clk_prepare_enable(priv->clk);
if (err) {
netdev_err(dev, "could not enable clock\n");
return err;
}
errors = readl(priv->base + SUN4I_REG_ERRC_ADDR);
bec->txerr = errors & 0xFF;
bec->rxerr = (errors >> 16) & 0xFF;
clk_disable_unprepare(priv->clk);
return 0;
}
static int sun4i_can_start(struct net_device *dev)
{
struct sun4ican_priv *priv = netdev_priv(dev);
int err;
u32 mod_reg_val;
/* we need to enter the reset mode */
err = set_reset_mode(dev);
if (err) {
netdev_err(dev, "could not enter reset mode\n");
return err;
}
/* set filters - we accept all */
writel(0x00000000, priv->base + SUN4I_REG_ACPC_ADDR);
writel(0xFFFFFFFF, priv->base + SUN4I_REG_ACPM_ADDR);
/* clear error counters and error code capture */
writel(0, priv->base + SUN4I_REG_ERRC_ADDR);
/* enable interrupts */
if (priv->can.ctrlmode & CAN_CTRLMODE_BERR_REPORTING)
writel(0xFF, priv->base + SUN4I_REG_INTEN_ADDR);
else
writel(0xFF & ~SUN4I_INTEN_BERR,
priv->base + SUN4I_REG_INTEN_ADDR);
/* enter the selected mode */
mod_reg_val = readl(priv->base + SUN4I_REG_MSEL_ADDR);
if (priv->can.ctrlmode & CAN_CTRLMODE_LOOPBACK)
mod_reg_val |= SUN4I_MSEL_LOOPBACK_MODE;
else if (priv->can.ctrlmode & CAN_CTRLMODE_LISTENONLY)
mod_reg_val |= SUN4I_MSEL_LISTEN_ONLY_MODE;
writel(mod_reg_val, priv->base + SUN4I_REG_MSEL_ADDR);
err = sun4ican_set_bittiming(dev);
if (err)
return err;
/* we are ready to enter the normal mode */
err = set_normal_mode(dev);
if (err) {
netdev_err(dev, "could not enter normal mode\n");
return err;
}
priv->can.state = CAN_STATE_ERROR_ACTIVE;
return 0;
}
static int sun4i_can_stop(struct net_device *dev)
{
struct sun4ican_priv *priv = netdev_priv(dev);
int err;
priv->can.state = CAN_STATE_STOPPED;
/* we need to enter reset mode */
err = set_reset_mode(dev);
if (err) {
netdev_err(dev, "could not enter reset mode\n");
return err;
}
/* disable all interrupts */
writel(0, priv->base + SUN4I_REG_INTEN_ADDR);
return 0;
}
static int sun4ican_set_mode(struct net_device *dev, enum can_mode mode)
{
int err;
switch (mode) {
case CAN_MODE_START:
err = sun4i_can_start(dev);
if (err) {
netdev_err(dev, "starting CAN controller failed!\n");
return err;
}
if (netif_queue_stopped(dev))
netif_wake_queue(dev);
break;
default:
return -EOPNOTSUPP;
}
return 0;
}
/* transmit a CAN message
* message layout in the sk_buff should be like this:
* xx xx xx xx ff ll 00 11 22 33 44 55 66 77
* [ can_id ] [flags] [len] [can data (up to 8 bytes]
*/
static netdev_tx_t sun4ican_start_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct sun4ican_priv *priv = netdev_priv(dev);
struct can_frame *cf = (struct can_frame *)skb->data;
u8 dlc;
u32 dreg, msg_flag_n;
canid_t id;
int i;
if (can_dropped_invalid_skb(dev, skb))
return NETDEV_TX_OK;
netif_stop_queue(dev);
id = cf->can_id;
dlc = cf->len;
msg_flag_n = dlc;
if (id & CAN_RTR_FLAG)
msg_flag_n |= SUN4I_MSG_RTR_FLAG;
if (id & CAN_EFF_FLAG) {
msg_flag_n |= SUN4I_MSG_EFF_FLAG;
dreg = SUN4I_REG_BUF5_ADDR;
writel((id >> 21) & 0xFF, priv->base + SUN4I_REG_BUF1_ADDR);
writel((id >> 13) & 0xFF, priv->base + SUN4I_REG_BUF2_ADDR);
writel((id >> 5) & 0xFF, priv->base + SUN4I_REG_BUF3_ADDR);
writel((id << 3) & 0xF8, priv->base + SUN4I_REG_BUF4_ADDR);
} else {
dreg = SUN4I_REG_BUF3_ADDR;
writel((id >> 3) & 0xFF, priv->base + SUN4I_REG_BUF1_ADDR);
writel((id << 5) & 0xE0, priv->base + SUN4I_REG_BUF2_ADDR);
}
for (i = 0; i < dlc; i++)
writel(cf->data[i], priv->base + (dreg + i * 4));
writel(msg_flag_n, priv->base + SUN4I_REG_BUF0_ADDR);
can_put_echo_skb(skb, dev, 0, 0);
if (priv->can.ctrlmode & CAN_CTRLMODE_LOOPBACK)
sun4i_can_write_cmdreg(priv, SUN4I_CMD_SELF_RCV_REQ);
else
sun4i_can_write_cmdreg(priv, SUN4I_CMD_TRANS_REQ);
return NETDEV_TX_OK;
}
static void sun4i_can_rx(struct net_device *dev)
{
struct sun4ican_priv *priv = netdev_priv(dev);
struct net_device_stats *stats = &dev->stats;
struct can_frame *cf;
struct sk_buff *skb;
u8 fi;
u32 dreg;
canid_t id;
int i;
/* create zero'ed CAN frame buffer */
skb = alloc_can_skb(dev, &cf);
if (!skb)
return;
fi = readl(priv->base + SUN4I_REG_BUF0_ADDR);
cf->len = can_cc_dlc2len(fi & 0x0F);
if (fi & SUN4I_MSG_EFF_FLAG) {
dreg = SUN4I_REG_BUF5_ADDR;
id = (readl(priv->base + SUN4I_REG_BUF1_ADDR) << 21) |
(readl(priv->base + SUN4I_REG_BUF2_ADDR) << 13) |
(readl(priv->base + SUN4I_REG_BUF3_ADDR) << 5) |
((readl(priv->base + SUN4I_REG_BUF4_ADDR) >> 3) & 0x1f);
id |= CAN_EFF_FLAG;
} else {
dreg = SUN4I_REG_BUF3_ADDR;
id = (readl(priv->base + SUN4I_REG_BUF1_ADDR) << 3) |
((readl(priv->base + SUN4I_REG_BUF2_ADDR) >> 5) & 0x7);
}
/* remote frame ? */
if (fi & SUN4I_MSG_RTR_FLAG)
id |= CAN_RTR_FLAG;
else
for (i = 0; i < cf->len; i++)
cf->data[i] = readl(priv->base + dreg + i * 4);
cf->can_id = id;
sun4i_can_write_cmdreg(priv, SUN4I_CMD_RELEASE_RBUF);
stats->rx_packets++;
stats->rx_bytes += cf->len;
netif_rx(skb);
can_led_event(dev, CAN_LED_EVENT_RX);
}
static int sun4i_can_err(struct net_device *dev, u8 isrc, u8 status)
{
struct sun4ican_priv *priv = netdev_priv(dev);
struct net_device_stats *stats = &dev->stats;
struct can_frame *cf;
struct sk_buff *skb;
enum can_state state = priv->can.state;
enum can_state rx_state, tx_state;
unsigned int rxerr, txerr, errc;
u32 ecc, alc;
/* we don't skip if alloc fails because we want the stats anyhow */
skb = alloc_can_err_skb(dev, &cf);
errc = readl(priv->base + SUN4I_REG_ERRC_ADDR);
rxerr = (errc >> 16) & 0xFF;
txerr = errc & 0xFF;
if (skb) {
cf->data[6] = txerr;
cf->data[7] = rxerr;
}
if (isrc & SUN4I_INT_DATA_OR) {
/* data overrun interrupt */
netdev_dbg(dev, "data overrun interrupt\n");
if (likely(skb)) {
cf->can_id |= CAN_ERR_CRTL;
cf->data[1] = CAN_ERR_CRTL_RX_OVERFLOW;
}
stats->rx_over_errors++;
stats->rx_errors++;
/* reset the CAN IP by entering reset mode
* ignoring timeout error
*/
set_reset_mode(dev);
set_normal_mode(dev);
/* clear bit */
sun4i_can_write_cmdreg(priv, SUN4I_CMD_CLEAR_OR_FLAG);
}
if (isrc & SUN4I_INT_ERR_WRN) {
/* error warning interrupt */
netdev_dbg(dev, "error warning interrupt\n");
if (status & SUN4I_STA_BUS_OFF)
state = CAN_STATE_BUS_OFF;
else if (status & SUN4I_STA_ERR_STA)
state = CAN_STATE_ERROR_WARNING;
else
state = CAN_STATE_ERROR_ACTIVE;
}
if (isrc & SUN4I_INT_BUS_ERR) {
/* bus error interrupt */
netdev_dbg(dev, "bus error interrupt\n");
priv->can.can_stats.bus_error++;
stats->rx_errors++;
if (likely(skb)) {
ecc = readl(priv->base + SUN4I_REG_STA_ADDR);
cf->can_id |= CAN_ERR_PROT | CAN_ERR_BUSERROR;
switch (ecc & SUN4I_STA_MASK_ERR) {
case SUN4I_STA_BIT_ERR:
cf->data[2] |= CAN_ERR_PROT_BIT;
break;
case SUN4I_STA_FORM_ERR:
cf->data[2] |= CAN_ERR_PROT_FORM;
break;
case SUN4I_STA_STUFF_ERR:
cf->data[2] |= CAN_ERR_PROT_STUFF;
break;
default:
cf->data[3] = (ecc & SUN4I_STA_ERR_SEG_CODE)
>> 16;
break;
}
/* error occurred during transmission? */
if ((ecc & SUN4I_STA_ERR_DIR) == 0)
cf->data[2] |= CAN_ERR_PROT_TX;
}
}
if (isrc & SUN4I_INT_ERR_PASSIVE) {
/* error passive interrupt */
netdev_dbg(dev, "error passive interrupt\n");
if (state == CAN_STATE_ERROR_PASSIVE)
state = CAN_STATE_ERROR_WARNING;
else
state = CAN_STATE_ERROR_PASSIVE;
}
if (isrc & SUN4I_INT_ARB_LOST) {
/* arbitration lost interrupt */
netdev_dbg(dev, "arbitration lost interrupt\n");
alc = readl(priv->base + SUN4I_REG_STA_ADDR);
priv->can.can_stats.arbitration_lost++;
if (likely(skb)) {
cf->can_id |= CAN_ERR_LOSTARB;
cf->data[0] = (alc >> 8) & 0x1f;
}
}
if (state != priv->can.state) {
tx_state = txerr >= rxerr ? state : 0;
rx_state = txerr <= rxerr ? state : 0;
if (likely(skb))
can_change_state(dev, cf, tx_state, rx_state);
else
priv->can.state = state;
if (state == CAN_STATE_BUS_OFF)
can_bus_off(dev);
}
if (likely(skb)) {
stats->rx_packets++;
stats->rx_bytes += cf->len;
netif_rx(skb);
} else {
return -ENOMEM;
}
return 0;
}
static irqreturn_t sun4i_can_interrupt(int irq, void *dev_id)
{
struct net_device *dev = (struct net_device *)dev_id;
struct sun4ican_priv *priv = netdev_priv(dev);
struct net_device_stats *stats = &dev->stats;
u8 isrc, status;
int n = 0;
while ((isrc = readl(priv->base + SUN4I_REG_INT_ADDR)) &&
(n < SUN4I_CAN_MAX_IRQ)) {
n++;
status = readl(priv->base + SUN4I_REG_STA_ADDR);
if (isrc & SUN4I_INT_WAKEUP)
netdev_warn(dev, "wakeup interrupt\n");
if (isrc & SUN4I_INT_TBUF_VLD) {
/* transmission complete interrupt */
stats->tx_bytes +=
readl(priv->base +
SUN4I_REG_RBUF_RBACK_START_ADDR) & 0xf;
stats->tx_packets++;
can_get_echo_skb(dev, 0, NULL);
netif_wake_queue(dev);
can_led_event(dev, CAN_LED_EVENT_TX);
}
if ((isrc & SUN4I_INT_RBUF_VLD) &&
!(isrc & SUN4I_INT_DATA_OR)) {
/* receive interrupt - don't read if overrun occurred */
while (status & SUN4I_STA_RBUF_RDY) {
/* RX buffer is not empty */
sun4i_can_rx(dev);
status = readl(priv->base + SUN4I_REG_STA_ADDR);
}
}
if (isrc &
(SUN4I_INT_DATA_OR | SUN4I_INT_ERR_WRN | SUN4I_INT_BUS_ERR |
SUN4I_INT_ERR_PASSIVE | SUN4I_INT_ARB_LOST)) {
/* error interrupt */
if (sun4i_can_err(dev, isrc, status))
netdev_err(dev, "can't allocate buffer - clearing pending interrupts\n");
}
/* clear interrupts */
writel(isrc, priv->base + SUN4I_REG_INT_ADDR);
readl(priv->base + SUN4I_REG_INT_ADDR);
}
if (n >= SUN4I_CAN_MAX_IRQ)
netdev_dbg(dev, "%d messages handled in ISR", n);
return (n) ? IRQ_HANDLED : IRQ_NONE;
}
static int sun4ican_open(struct net_device *dev)
{
struct sun4ican_priv *priv = netdev_priv(dev);
int err;
/* common open */
err = open_candev(dev);
if (err)
return err;
/* register interrupt handler */
err = request_irq(dev->irq, sun4i_can_interrupt, 0, dev->name, dev);
if (err) {
netdev_err(dev, "request_irq err: %d\n", err);
goto exit_irq;
}
/* turn on clocking for CAN peripheral block */
err = clk_prepare_enable(priv->clk);
if (err) {
netdev_err(dev, "could not enable CAN peripheral clock\n");
goto exit_clock;
}
err = sun4i_can_start(dev);
if (err) {
netdev_err(dev, "could not start CAN peripheral\n");
goto exit_can_start;
}
can_led_event(dev, CAN_LED_EVENT_OPEN);
netif_start_queue(dev);
return 0;
exit_can_start:
clk_disable_unprepare(priv->clk);
exit_clock:
free_irq(dev->irq, dev);
exit_irq:
close_candev(dev);
return err;
}
static int sun4ican_close(struct net_device *dev)
{
struct sun4ican_priv *priv = netdev_priv(dev);
netif_stop_queue(dev);
sun4i_can_stop(dev);
clk_disable_unprepare(priv->clk);
free_irq(dev->irq, dev);
close_candev(dev);
can_led_event(dev, CAN_LED_EVENT_STOP);
return 0;
}
static const struct net_device_ops sun4ican_netdev_ops = {
.ndo_open = sun4ican_open,
.ndo_stop = sun4ican_close,
.ndo_start_xmit = sun4ican_start_xmit,
};
static const struct of_device_id sun4ican_of_match[] = {
{.compatible = "allwinner,sun4i-a10-can"},
{},
};
MODULE_DEVICE_TABLE(of, sun4ican_of_match);
static int sun4ican_remove(struct platform_device *pdev)
{
struct net_device *dev = platform_get_drvdata(pdev);
unregister_netdev(dev);
free_candev(dev);
return 0;
}
static int sun4ican_probe(struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
struct clk *clk;
void __iomem *addr;
int err, irq;
struct net_device *dev;
struct sun4ican_priv *priv;
clk = of_clk_get(np, 0);
if (IS_ERR(clk)) {
dev_err(&pdev->dev, "unable to request clock\n");
err = -ENODEV;
goto exit;
}
irq = platform_get_irq(pdev, 0);
if (irq < 0) {
err = -ENODEV;
goto exit;
}
addr = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(addr)) {
err = PTR_ERR(addr);
goto exit;
}
dev = alloc_candev(sizeof(struct sun4ican_priv), 1);
if (!dev) {
dev_err(&pdev->dev,
"could not allocate memory for CAN device\n");
err = -ENOMEM;
goto exit;
}
dev->netdev_ops = &sun4ican_netdev_ops;
dev->irq = irq;
dev->flags |= IFF_ECHO;
priv = netdev_priv(dev);
priv->can.clock.freq = clk_get_rate(clk);
priv->can.bittiming_const = &sun4ican_bittiming_const;
priv->can.do_set_mode = sun4ican_set_mode;
priv->can.do_get_berr_counter = sun4ican_get_berr_counter;
priv->can.ctrlmode_supported = CAN_CTRLMODE_BERR_REPORTING |
CAN_CTRLMODE_LISTENONLY |
CAN_CTRLMODE_LOOPBACK |
CAN_CTRLMODE_3_SAMPLES;
priv->base = addr;
priv->clk = clk;
spin_lock_init(&priv->cmdreg_lock);
platform_set_drvdata(pdev, dev);
SET_NETDEV_DEV(dev, &pdev->dev);
err = register_candev(dev);
if (err) {
dev_err(&pdev->dev, "registering %s failed (err=%d)\n",
DRV_NAME, err);
goto exit_free;
}
devm_can_led_init(dev);
dev_info(&pdev->dev, "device registered (base=%p, irq=%d)\n",
priv->base, dev->irq);
return 0;
exit_free:
free_candev(dev);
exit:
return err;
}
static struct platform_driver sun4i_can_driver = {
.driver = {
.name = DRV_NAME,
.of_match_table = sun4ican_of_match,
},
.probe = sun4ican_probe,
.remove = sun4ican_remove,
};
module_platform_driver(sun4i_can_driver);
MODULE_AUTHOR("Peter Chen <xingkongcp@gmail.com>");
MODULE_AUTHOR("Gerhard Bertelsmann <info@gerhard-bertelsmann.de>");
MODULE_LICENSE("Dual BSD/GPL");
MODULE_DESCRIPTION("CAN driver for Allwinner SoCs (A10/A20)");