mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-19 10:14:23 +08:00
3d1ff755e3
The perf userspace tools can't handle dashes or spaces in PMU names, which conflicts with the current naming scheme in the arm perf backend. This prevents these PMUs from being accessed by name from the perf tools. Additionally the ARMv6 pmus are named "v6", which does not fully distinguish them in the sys/bus/event_source namespace. This patch renames the PMUs consistently to a lower case form with underscores, e.g. "armv6_1176", "armv7_cortex_a9". This is both readily accepted by today's perf tool, and far easier to type than the (apparently unused) convention in use previously. The OProfile name conversion code is updated to handle this. Due to a copy-paste error involving two "xscale1" entries, "xscale2" has never been matched by the name OProfile name mapping. While we're updating names, this is corrected. Acked-by: Will Deacon <will.deacon@arm.com> Tested-by: Christopher Covington <cov@codeaurora.org> Signed-off-by: Mark Rutland <mark.rutland@arm.com> [sachin: fixed missing semicolons in armv6 backend] Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
754 lines
20 KiB
C
754 lines
20 KiB
C
/*
|
|
* ARMv5 [xscale] Performance counter handling code.
|
|
*
|
|
* Copyright (C) 2010, ARM Ltd., Will Deacon <will.deacon@arm.com>
|
|
*
|
|
* Based on the previous xscale OProfile code.
|
|
*
|
|
* There are two variants of the xscale PMU that we support:
|
|
* - xscale1pmu: 2 event counters and a cycle counter
|
|
* - xscale2pmu: 4 event counters and a cycle counter
|
|
* The two variants share event definitions, but have different
|
|
* PMU structures.
|
|
*/
|
|
|
|
#ifdef CONFIG_CPU_XSCALE
|
|
enum xscale_perf_types {
|
|
XSCALE_PERFCTR_ICACHE_MISS = 0x00,
|
|
XSCALE_PERFCTR_ICACHE_NO_DELIVER = 0x01,
|
|
XSCALE_PERFCTR_DATA_STALL = 0x02,
|
|
XSCALE_PERFCTR_ITLB_MISS = 0x03,
|
|
XSCALE_PERFCTR_DTLB_MISS = 0x04,
|
|
XSCALE_PERFCTR_BRANCH = 0x05,
|
|
XSCALE_PERFCTR_BRANCH_MISS = 0x06,
|
|
XSCALE_PERFCTR_INSTRUCTION = 0x07,
|
|
XSCALE_PERFCTR_DCACHE_FULL_STALL = 0x08,
|
|
XSCALE_PERFCTR_DCACHE_FULL_STALL_CONTIG = 0x09,
|
|
XSCALE_PERFCTR_DCACHE_ACCESS = 0x0A,
|
|
XSCALE_PERFCTR_DCACHE_MISS = 0x0B,
|
|
XSCALE_PERFCTR_DCACHE_WRITE_BACK = 0x0C,
|
|
XSCALE_PERFCTR_PC_CHANGED = 0x0D,
|
|
XSCALE_PERFCTR_BCU_REQUEST = 0x10,
|
|
XSCALE_PERFCTR_BCU_FULL = 0x11,
|
|
XSCALE_PERFCTR_BCU_DRAIN = 0x12,
|
|
XSCALE_PERFCTR_BCU_ECC_NO_ELOG = 0x14,
|
|
XSCALE_PERFCTR_BCU_1_BIT_ERR = 0x15,
|
|
XSCALE_PERFCTR_RMW = 0x16,
|
|
/* XSCALE_PERFCTR_CCNT is not hardware defined */
|
|
XSCALE_PERFCTR_CCNT = 0xFE,
|
|
XSCALE_PERFCTR_UNUSED = 0xFF,
|
|
};
|
|
|
|
enum xscale_counters {
|
|
XSCALE_CYCLE_COUNTER = 0,
|
|
XSCALE_COUNTER0,
|
|
XSCALE_COUNTER1,
|
|
XSCALE_COUNTER2,
|
|
XSCALE_COUNTER3,
|
|
};
|
|
|
|
static const unsigned xscale_perf_map[PERF_COUNT_HW_MAX] = {
|
|
PERF_MAP_ALL_UNSUPPORTED,
|
|
[PERF_COUNT_HW_CPU_CYCLES] = XSCALE_PERFCTR_CCNT,
|
|
[PERF_COUNT_HW_INSTRUCTIONS] = XSCALE_PERFCTR_INSTRUCTION,
|
|
[PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = XSCALE_PERFCTR_BRANCH,
|
|
[PERF_COUNT_HW_BRANCH_MISSES] = XSCALE_PERFCTR_BRANCH_MISS,
|
|
[PERF_COUNT_HW_STALLED_CYCLES_FRONTEND] = XSCALE_PERFCTR_ICACHE_NO_DELIVER,
|
|
};
|
|
|
|
static const unsigned xscale_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
|
|
[PERF_COUNT_HW_CACHE_OP_MAX]
|
|
[PERF_COUNT_HW_CACHE_RESULT_MAX] = {
|
|
PERF_CACHE_MAP_ALL_UNSUPPORTED,
|
|
|
|
[C(L1D)][C(OP_READ)][C(RESULT_ACCESS)] = XSCALE_PERFCTR_DCACHE_ACCESS,
|
|
[C(L1D)][C(OP_READ)][C(RESULT_MISS)] = XSCALE_PERFCTR_DCACHE_MISS,
|
|
[C(L1D)][C(OP_WRITE)][C(RESULT_ACCESS)] = XSCALE_PERFCTR_DCACHE_ACCESS,
|
|
[C(L1D)][C(OP_WRITE)][C(RESULT_MISS)] = XSCALE_PERFCTR_DCACHE_MISS,
|
|
|
|
[C(L1I)][C(OP_READ)][C(RESULT_MISS)] = XSCALE_PERFCTR_ICACHE_MISS,
|
|
|
|
[C(DTLB)][C(OP_READ)][C(RESULT_MISS)] = XSCALE_PERFCTR_DTLB_MISS,
|
|
[C(DTLB)][C(OP_WRITE)][C(RESULT_MISS)] = XSCALE_PERFCTR_DTLB_MISS,
|
|
|
|
[C(ITLB)][C(OP_READ)][C(RESULT_MISS)] = XSCALE_PERFCTR_ITLB_MISS,
|
|
[C(ITLB)][C(OP_WRITE)][C(RESULT_MISS)] = XSCALE_PERFCTR_ITLB_MISS,
|
|
};
|
|
|
|
#define XSCALE_PMU_ENABLE 0x001
|
|
#define XSCALE_PMN_RESET 0x002
|
|
#define XSCALE_CCNT_RESET 0x004
|
|
#define XSCALE_PMU_RESET (CCNT_RESET | PMN_RESET)
|
|
#define XSCALE_PMU_CNT64 0x008
|
|
|
|
#define XSCALE1_OVERFLOWED_MASK 0x700
|
|
#define XSCALE1_CCOUNT_OVERFLOW 0x400
|
|
#define XSCALE1_COUNT0_OVERFLOW 0x100
|
|
#define XSCALE1_COUNT1_OVERFLOW 0x200
|
|
#define XSCALE1_CCOUNT_INT_EN 0x040
|
|
#define XSCALE1_COUNT0_INT_EN 0x010
|
|
#define XSCALE1_COUNT1_INT_EN 0x020
|
|
#define XSCALE1_COUNT0_EVT_SHFT 12
|
|
#define XSCALE1_COUNT0_EVT_MASK (0xff << XSCALE1_COUNT0_EVT_SHFT)
|
|
#define XSCALE1_COUNT1_EVT_SHFT 20
|
|
#define XSCALE1_COUNT1_EVT_MASK (0xff << XSCALE1_COUNT1_EVT_SHFT)
|
|
|
|
static inline u32
|
|
xscale1pmu_read_pmnc(void)
|
|
{
|
|
u32 val;
|
|
asm volatile("mrc p14, 0, %0, c0, c0, 0" : "=r" (val));
|
|
return val;
|
|
}
|
|
|
|
static inline void
|
|
xscale1pmu_write_pmnc(u32 val)
|
|
{
|
|
/* upper 4bits and 7, 11 are write-as-0 */
|
|
val &= 0xffff77f;
|
|
asm volatile("mcr p14, 0, %0, c0, c0, 0" : : "r" (val));
|
|
}
|
|
|
|
static inline int
|
|
xscale1_pmnc_counter_has_overflowed(unsigned long pmnc,
|
|
enum xscale_counters counter)
|
|
{
|
|
int ret = 0;
|
|
|
|
switch (counter) {
|
|
case XSCALE_CYCLE_COUNTER:
|
|
ret = pmnc & XSCALE1_CCOUNT_OVERFLOW;
|
|
break;
|
|
case XSCALE_COUNTER0:
|
|
ret = pmnc & XSCALE1_COUNT0_OVERFLOW;
|
|
break;
|
|
case XSCALE_COUNTER1:
|
|
ret = pmnc & XSCALE1_COUNT1_OVERFLOW;
|
|
break;
|
|
default:
|
|
WARN_ONCE(1, "invalid counter number (%d)\n", counter);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static irqreturn_t
|
|
xscale1pmu_handle_irq(int irq_num, void *dev)
|
|
{
|
|
unsigned long pmnc;
|
|
struct perf_sample_data data;
|
|
struct arm_pmu *cpu_pmu = (struct arm_pmu *)dev;
|
|
struct pmu_hw_events *cpuc = cpu_pmu->get_hw_events();
|
|
struct pt_regs *regs;
|
|
int idx;
|
|
|
|
/*
|
|
* NOTE: there's an A stepping erratum that states if an overflow
|
|
* bit already exists and another occurs, the previous
|
|
* Overflow bit gets cleared. There's no workaround.
|
|
* Fixed in B stepping or later.
|
|
*/
|
|
pmnc = xscale1pmu_read_pmnc();
|
|
|
|
/*
|
|
* Write the value back to clear the overflow flags. Overflow
|
|
* flags remain in pmnc for use below. We also disable the PMU
|
|
* while we process the interrupt.
|
|
*/
|
|
xscale1pmu_write_pmnc(pmnc & ~XSCALE_PMU_ENABLE);
|
|
|
|
if (!(pmnc & XSCALE1_OVERFLOWED_MASK))
|
|
return IRQ_NONE;
|
|
|
|
regs = get_irq_regs();
|
|
|
|
for (idx = 0; idx < cpu_pmu->num_events; ++idx) {
|
|
struct perf_event *event = cpuc->events[idx];
|
|
struct hw_perf_event *hwc;
|
|
|
|
if (!event)
|
|
continue;
|
|
|
|
if (!xscale1_pmnc_counter_has_overflowed(pmnc, idx))
|
|
continue;
|
|
|
|
hwc = &event->hw;
|
|
armpmu_event_update(event);
|
|
perf_sample_data_init(&data, 0, hwc->last_period);
|
|
if (!armpmu_event_set_period(event))
|
|
continue;
|
|
|
|
if (perf_event_overflow(event, &data, regs))
|
|
cpu_pmu->disable(event);
|
|
}
|
|
|
|
irq_work_run();
|
|
|
|
/*
|
|
* Re-enable the PMU.
|
|
*/
|
|
pmnc = xscale1pmu_read_pmnc() | XSCALE_PMU_ENABLE;
|
|
xscale1pmu_write_pmnc(pmnc);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static void xscale1pmu_enable_event(struct perf_event *event)
|
|
{
|
|
unsigned long val, mask, evt, flags;
|
|
struct arm_pmu *cpu_pmu = to_arm_pmu(event->pmu);
|
|
struct hw_perf_event *hwc = &event->hw;
|
|
struct pmu_hw_events *events = cpu_pmu->get_hw_events();
|
|
int idx = hwc->idx;
|
|
|
|
switch (idx) {
|
|
case XSCALE_CYCLE_COUNTER:
|
|
mask = 0;
|
|
evt = XSCALE1_CCOUNT_INT_EN;
|
|
break;
|
|
case XSCALE_COUNTER0:
|
|
mask = XSCALE1_COUNT0_EVT_MASK;
|
|
evt = (hwc->config_base << XSCALE1_COUNT0_EVT_SHFT) |
|
|
XSCALE1_COUNT0_INT_EN;
|
|
break;
|
|
case XSCALE_COUNTER1:
|
|
mask = XSCALE1_COUNT1_EVT_MASK;
|
|
evt = (hwc->config_base << XSCALE1_COUNT1_EVT_SHFT) |
|
|
XSCALE1_COUNT1_INT_EN;
|
|
break;
|
|
default:
|
|
WARN_ONCE(1, "invalid counter number (%d)\n", idx);
|
|
return;
|
|
}
|
|
|
|
raw_spin_lock_irqsave(&events->pmu_lock, flags);
|
|
val = xscale1pmu_read_pmnc();
|
|
val &= ~mask;
|
|
val |= evt;
|
|
xscale1pmu_write_pmnc(val);
|
|
raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
|
|
}
|
|
|
|
static void xscale1pmu_disable_event(struct perf_event *event)
|
|
{
|
|
unsigned long val, mask, evt, flags;
|
|
struct arm_pmu *cpu_pmu = to_arm_pmu(event->pmu);
|
|
struct hw_perf_event *hwc = &event->hw;
|
|
struct pmu_hw_events *events = cpu_pmu->get_hw_events();
|
|
int idx = hwc->idx;
|
|
|
|
switch (idx) {
|
|
case XSCALE_CYCLE_COUNTER:
|
|
mask = XSCALE1_CCOUNT_INT_EN;
|
|
evt = 0;
|
|
break;
|
|
case XSCALE_COUNTER0:
|
|
mask = XSCALE1_COUNT0_INT_EN | XSCALE1_COUNT0_EVT_MASK;
|
|
evt = XSCALE_PERFCTR_UNUSED << XSCALE1_COUNT0_EVT_SHFT;
|
|
break;
|
|
case XSCALE_COUNTER1:
|
|
mask = XSCALE1_COUNT1_INT_EN | XSCALE1_COUNT1_EVT_MASK;
|
|
evt = XSCALE_PERFCTR_UNUSED << XSCALE1_COUNT1_EVT_SHFT;
|
|
break;
|
|
default:
|
|
WARN_ONCE(1, "invalid counter number (%d)\n", idx);
|
|
return;
|
|
}
|
|
|
|
raw_spin_lock_irqsave(&events->pmu_lock, flags);
|
|
val = xscale1pmu_read_pmnc();
|
|
val &= ~mask;
|
|
val |= evt;
|
|
xscale1pmu_write_pmnc(val);
|
|
raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
|
|
}
|
|
|
|
static int
|
|
xscale1pmu_get_event_idx(struct pmu_hw_events *cpuc,
|
|
struct perf_event *event)
|
|
{
|
|
struct hw_perf_event *hwc = &event->hw;
|
|
if (XSCALE_PERFCTR_CCNT == hwc->config_base) {
|
|
if (test_and_set_bit(XSCALE_CYCLE_COUNTER, cpuc->used_mask))
|
|
return -EAGAIN;
|
|
|
|
return XSCALE_CYCLE_COUNTER;
|
|
} else {
|
|
if (!test_and_set_bit(XSCALE_COUNTER1, cpuc->used_mask))
|
|
return XSCALE_COUNTER1;
|
|
|
|
if (!test_and_set_bit(XSCALE_COUNTER0, cpuc->used_mask))
|
|
return XSCALE_COUNTER0;
|
|
|
|
return -EAGAIN;
|
|
}
|
|
}
|
|
|
|
static void xscale1pmu_start(struct arm_pmu *cpu_pmu)
|
|
{
|
|
unsigned long flags, val;
|
|
struct pmu_hw_events *events = cpu_pmu->get_hw_events();
|
|
|
|
raw_spin_lock_irqsave(&events->pmu_lock, flags);
|
|
val = xscale1pmu_read_pmnc();
|
|
val |= XSCALE_PMU_ENABLE;
|
|
xscale1pmu_write_pmnc(val);
|
|
raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
|
|
}
|
|
|
|
static void xscale1pmu_stop(struct arm_pmu *cpu_pmu)
|
|
{
|
|
unsigned long flags, val;
|
|
struct pmu_hw_events *events = cpu_pmu->get_hw_events();
|
|
|
|
raw_spin_lock_irqsave(&events->pmu_lock, flags);
|
|
val = xscale1pmu_read_pmnc();
|
|
val &= ~XSCALE_PMU_ENABLE;
|
|
xscale1pmu_write_pmnc(val);
|
|
raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
|
|
}
|
|
|
|
static inline u32 xscale1pmu_read_counter(struct perf_event *event)
|
|
{
|
|
struct hw_perf_event *hwc = &event->hw;
|
|
int counter = hwc->idx;
|
|
u32 val = 0;
|
|
|
|
switch (counter) {
|
|
case XSCALE_CYCLE_COUNTER:
|
|
asm volatile("mrc p14, 0, %0, c1, c0, 0" : "=r" (val));
|
|
break;
|
|
case XSCALE_COUNTER0:
|
|
asm volatile("mrc p14, 0, %0, c2, c0, 0" : "=r" (val));
|
|
break;
|
|
case XSCALE_COUNTER1:
|
|
asm volatile("mrc p14, 0, %0, c3, c0, 0" : "=r" (val));
|
|
break;
|
|
}
|
|
|
|
return val;
|
|
}
|
|
|
|
static inline void xscale1pmu_write_counter(struct perf_event *event, u32 val)
|
|
{
|
|
struct hw_perf_event *hwc = &event->hw;
|
|
int counter = hwc->idx;
|
|
|
|
switch (counter) {
|
|
case XSCALE_CYCLE_COUNTER:
|
|
asm volatile("mcr p14, 0, %0, c1, c0, 0" : : "r" (val));
|
|
break;
|
|
case XSCALE_COUNTER0:
|
|
asm volatile("mcr p14, 0, %0, c2, c0, 0" : : "r" (val));
|
|
break;
|
|
case XSCALE_COUNTER1:
|
|
asm volatile("mcr p14, 0, %0, c3, c0, 0" : : "r" (val));
|
|
break;
|
|
}
|
|
}
|
|
|
|
static int xscale_map_event(struct perf_event *event)
|
|
{
|
|
return armpmu_map_event(event, &xscale_perf_map,
|
|
&xscale_perf_cache_map, 0xFF);
|
|
}
|
|
|
|
static int xscale1pmu_init(struct arm_pmu *cpu_pmu)
|
|
{
|
|
cpu_pmu->name = "armv5_xscale1";
|
|
cpu_pmu->handle_irq = xscale1pmu_handle_irq;
|
|
cpu_pmu->enable = xscale1pmu_enable_event;
|
|
cpu_pmu->disable = xscale1pmu_disable_event;
|
|
cpu_pmu->read_counter = xscale1pmu_read_counter;
|
|
cpu_pmu->write_counter = xscale1pmu_write_counter;
|
|
cpu_pmu->get_event_idx = xscale1pmu_get_event_idx;
|
|
cpu_pmu->start = xscale1pmu_start;
|
|
cpu_pmu->stop = xscale1pmu_stop;
|
|
cpu_pmu->map_event = xscale_map_event;
|
|
cpu_pmu->num_events = 3;
|
|
cpu_pmu->max_period = (1LLU << 32) - 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
#define XSCALE2_OVERFLOWED_MASK 0x01f
|
|
#define XSCALE2_CCOUNT_OVERFLOW 0x001
|
|
#define XSCALE2_COUNT0_OVERFLOW 0x002
|
|
#define XSCALE2_COUNT1_OVERFLOW 0x004
|
|
#define XSCALE2_COUNT2_OVERFLOW 0x008
|
|
#define XSCALE2_COUNT3_OVERFLOW 0x010
|
|
#define XSCALE2_CCOUNT_INT_EN 0x001
|
|
#define XSCALE2_COUNT0_INT_EN 0x002
|
|
#define XSCALE2_COUNT1_INT_EN 0x004
|
|
#define XSCALE2_COUNT2_INT_EN 0x008
|
|
#define XSCALE2_COUNT3_INT_EN 0x010
|
|
#define XSCALE2_COUNT0_EVT_SHFT 0
|
|
#define XSCALE2_COUNT0_EVT_MASK (0xff << XSCALE2_COUNT0_EVT_SHFT)
|
|
#define XSCALE2_COUNT1_EVT_SHFT 8
|
|
#define XSCALE2_COUNT1_EVT_MASK (0xff << XSCALE2_COUNT1_EVT_SHFT)
|
|
#define XSCALE2_COUNT2_EVT_SHFT 16
|
|
#define XSCALE2_COUNT2_EVT_MASK (0xff << XSCALE2_COUNT2_EVT_SHFT)
|
|
#define XSCALE2_COUNT3_EVT_SHFT 24
|
|
#define XSCALE2_COUNT3_EVT_MASK (0xff << XSCALE2_COUNT3_EVT_SHFT)
|
|
|
|
static inline u32
|
|
xscale2pmu_read_pmnc(void)
|
|
{
|
|
u32 val;
|
|
asm volatile("mrc p14, 0, %0, c0, c1, 0" : "=r" (val));
|
|
/* bits 1-2 and 4-23 are read-unpredictable */
|
|
return val & 0xff000009;
|
|
}
|
|
|
|
static inline void
|
|
xscale2pmu_write_pmnc(u32 val)
|
|
{
|
|
/* bits 4-23 are write-as-0, 24-31 are write ignored */
|
|
val &= 0xf;
|
|
asm volatile("mcr p14, 0, %0, c0, c1, 0" : : "r" (val));
|
|
}
|
|
|
|
static inline u32
|
|
xscale2pmu_read_overflow_flags(void)
|
|
{
|
|
u32 val;
|
|
asm volatile("mrc p14, 0, %0, c5, c1, 0" : "=r" (val));
|
|
return val;
|
|
}
|
|
|
|
static inline void
|
|
xscale2pmu_write_overflow_flags(u32 val)
|
|
{
|
|
asm volatile("mcr p14, 0, %0, c5, c1, 0" : : "r" (val));
|
|
}
|
|
|
|
static inline u32
|
|
xscale2pmu_read_event_select(void)
|
|
{
|
|
u32 val;
|
|
asm volatile("mrc p14, 0, %0, c8, c1, 0" : "=r" (val));
|
|
return val;
|
|
}
|
|
|
|
static inline void
|
|
xscale2pmu_write_event_select(u32 val)
|
|
{
|
|
asm volatile("mcr p14, 0, %0, c8, c1, 0" : : "r"(val));
|
|
}
|
|
|
|
static inline u32
|
|
xscale2pmu_read_int_enable(void)
|
|
{
|
|
u32 val;
|
|
asm volatile("mrc p14, 0, %0, c4, c1, 0" : "=r" (val));
|
|
return val;
|
|
}
|
|
|
|
static void
|
|
xscale2pmu_write_int_enable(u32 val)
|
|
{
|
|
asm volatile("mcr p14, 0, %0, c4, c1, 0" : : "r" (val));
|
|
}
|
|
|
|
static inline int
|
|
xscale2_pmnc_counter_has_overflowed(unsigned long of_flags,
|
|
enum xscale_counters counter)
|
|
{
|
|
int ret = 0;
|
|
|
|
switch (counter) {
|
|
case XSCALE_CYCLE_COUNTER:
|
|
ret = of_flags & XSCALE2_CCOUNT_OVERFLOW;
|
|
break;
|
|
case XSCALE_COUNTER0:
|
|
ret = of_flags & XSCALE2_COUNT0_OVERFLOW;
|
|
break;
|
|
case XSCALE_COUNTER1:
|
|
ret = of_flags & XSCALE2_COUNT1_OVERFLOW;
|
|
break;
|
|
case XSCALE_COUNTER2:
|
|
ret = of_flags & XSCALE2_COUNT2_OVERFLOW;
|
|
break;
|
|
case XSCALE_COUNTER3:
|
|
ret = of_flags & XSCALE2_COUNT3_OVERFLOW;
|
|
break;
|
|
default:
|
|
WARN_ONCE(1, "invalid counter number (%d)\n", counter);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static irqreturn_t
|
|
xscale2pmu_handle_irq(int irq_num, void *dev)
|
|
{
|
|
unsigned long pmnc, of_flags;
|
|
struct perf_sample_data data;
|
|
struct arm_pmu *cpu_pmu = (struct arm_pmu *)dev;
|
|
struct pmu_hw_events *cpuc = cpu_pmu->get_hw_events();
|
|
struct pt_regs *regs;
|
|
int idx;
|
|
|
|
/* Disable the PMU. */
|
|
pmnc = xscale2pmu_read_pmnc();
|
|
xscale2pmu_write_pmnc(pmnc & ~XSCALE_PMU_ENABLE);
|
|
|
|
/* Check the overflow flag register. */
|
|
of_flags = xscale2pmu_read_overflow_flags();
|
|
if (!(of_flags & XSCALE2_OVERFLOWED_MASK))
|
|
return IRQ_NONE;
|
|
|
|
/* Clear the overflow bits. */
|
|
xscale2pmu_write_overflow_flags(of_flags);
|
|
|
|
regs = get_irq_regs();
|
|
|
|
for (idx = 0; idx < cpu_pmu->num_events; ++idx) {
|
|
struct perf_event *event = cpuc->events[idx];
|
|
struct hw_perf_event *hwc;
|
|
|
|
if (!event)
|
|
continue;
|
|
|
|
if (!xscale2_pmnc_counter_has_overflowed(of_flags, idx))
|
|
continue;
|
|
|
|
hwc = &event->hw;
|
|
armpmu_event_update(event);
|
|
perf_sample_data_init(&data, 0, hwc->last_period);
|
|
if (!armpmu_event_set_period(event))
|
|
continue;
|
|
|
|
if (perf_event_overflow(event, &data, regs))
|
|
cpu_pmu->disable(event);
|
|
}
|
|
|
|
irq_work_run();
|
|
|
|
/*
|
|
* Re-enable the PMU.
|
|
*/
|
|
pmnc = xscale2pmu_read_pmnc() | XSCALE_PMU_ENABLE;
|
|
xscale2pmu_write_pmnc(pmnc);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static void xscale2pmu_enable_event(struct perf_event *event)
|
|
{
|
|
unsigned long flags, ien, evtsel;
|
|
struct arm_pmu *cpu_pmu = to_arm_pmu(event->pmu);
|
|
struct hw_perf_event *hwc = &event->hw;
|
|
struct pmu_hw_events *events = cpu_pmu->get_hw_events();
|
|
int idx = hwc->idx;
|
|
|
|
ien = xscale2pmu_read_int_enable();
|
|
evtsel = xscale2pmu_read_event_select();
|
|
|
|
switch (idx) {
|
|
case XSCALE_CYCLE_COUNTER:
|
|
ien |= XSCALE2_CCOUNT_INT_EN;
|
|
break;
|
|
case XSCALE_COUNTER0:
|
|
ien |= XSCALE2_COUNT0_INT_EN;
|
|
evtsel &= ~XSCALE2_COUNT0_EVT_MASK;
|
|
evtsel |= hwc->config_base << XSCALE2_COUNT0_EVT_SHFT;
|
|
break;
|
|
case XSCALE_COUNTER1:
|
|
ien |= XSCALE2_COUNT1_INT_EN;
|
|
evtsel &= ~XSCALE2_COUNT1_EVT_MASK;
|
|
evtsel |= hwc->config_base << XSCALE2_COUNT1_EVT_SHFT;
|
|
break;
|
|
case XSCALE_COUNTER2:
|
|
ien |= XSCALE2_COUNT2_INT_EN;
|
|
evtsel &= ~XSCALE2_COUNT2_EVT_MASK;
|
|
evtsel |= hwc->config_base << XSCALE2_COUNT2_EVT_SHFT;
|
|
break;
|
|
case XSCALE_COUNTER3:
|
|
ien |= XSCALE2_COUNT3_INT_EN;
|
|
evtsel &= ~XSCALE2_COUNT3_EVT_MASK;
|
|
evtsel |= hwc->config_base << XSCALE2_COUNT3_EVT_SHFT;
|
|
break;
|
|
default:
|
|
WARN_ONCE(1, "invalid counter number (%d)\n", idx);
|
|
return;
|
|
}
|
|
|
|
raw_spin_lock_irqsave(&events->pmu_lock, flags);
|
|
xscale2pmu_write_event_select(evtsel);
|
|
xscale2pmu_write_int_enable(ien);
|
|
raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
|
|
}
|
|
|
|
static void xscale2pmu_disable_event(struct perf_event *event)
|
|
{
|
|
unsigned long flags, ien, evtsel, of_flags;
|
|
struct arm_pmu *cpu_pmu = to_arm_pmu(event->pmu);
|
|
struct hw_perf_event *hwc = &event->hw;
|
|
struct pmu_hw_events *events = cpu_pmu->get_hw_events();
|
|
int idx = hwc->idx;
|
|
|
|
ien = xscale2pmu_read_int_enable();
|
|
evtsel = xscale2pmu_read_event_select();
|
|
|
|
switch (idx) {
|
|
case XSCALE_CYCLE_COUNTER:
|
|
ien &= ~XSCALE2_CCOUNT_INT_EN;
|
|
of_flags = XSCALE2_CCOUNT_OVERFLOW;
|
|
break;
|
|
case XSCALE_COUNTER0:
|
|
ien &= ~XSCALE2_COUNT0_INT_EN;
|
|
evtsel &= ~XSCALE2_COUNT0_EVT_MASK;
|
|
evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT0_EVT_SHFT;
|
|
of_flags = XSCALE2_COUNT0_OVERFLOW;
|
|
break;
|
|
case XSCALE_COUNTER1:
|
|
ien &= ~XSCALE2_COUNT1_INT_EN;
|
|
evtsel &= ~XSCALE2_COUNT1_EVT_MASK;
|
|
evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT1_EVT_SHFT;
|
|
of_flags = XSCALE2_COUNT1_OVERFLOW;
|
|
break;
|
|
case XSCALE_COUNTER2:
|
|
ien &= ~XSCALE2_COUNT2_INT_EN;
|
|
evtsel &= ~XSCALE2_COUNT2_EVT_MASK;
|
|
evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT2_EVT_SHFT;
|
|
of_flags = XSCALE2_COUNT2_OVERFLOW;
|
|
break;
|
|
case XSCALE_COUNTER3:
|
|
ien &= ~XSCALE2_COUNT3_INT_EN;
|
|
evtsel &= ~XSCALE2_COUNT3_EVT_MASK;
|
|
evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT3_EVT_SHFT;
|
|
of_flags = XSCALE2_COUNT3_OVERFLOW;
|
|
break;
|
|
default:
|
|
WARN_ONCE(1, "invalid counter number (%d)\n", idx);
|
|
return;
|
|
}
|
|
|
|
raw_spin_lock_irqsave(&events->pmu_lock, flags);
|
|
xscale2pmu_write_event_select(evtsel);
|
|
xscale2pmu_write_int_enable(ien);
|
|
xscale2pmu_write_overflow_flags(of_flags);
|
|
raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
|
|
}
|
|
|
|
static int
|
|
xscale2pmu_get_event_idx(struct pmu_hw_events *cpuc,
|
|
struct perf_event *event)
|
|
{
|
|
int idx = xscale1pmu_get_event_idx(cpuc, event);
|
|
if (idx >= 0)
|
|
goto out;
|
|
|
|
if (!test_and_set_bit(XSCALE_COUNTER3, cpuc->used_mask))
|
|
idx = XSCALE_COUNTER3;
|
|
else if (!test_and_set_bit(XSCALE_COUNTER2, cpuc->used_mask))
|
|
idx = XSCALE_COUNTER2;
|
|
out:
|
|
return idx;
|
|
}
|
|
|
|
static void xscale2pmu_start(struct arm_pmu *cpu_pmu)
|
|
{
|
|
unsigned long flags, val;
|
|
struct pmu_hw_events *events = cpu_pmu->get_hw_events();
|
|
|
|
raw_spin_lock_irqsave(&events->pmu_lock, flags);
|
|
val = xscale2pmu_read_pmnc() & ~XSCALE_PMU_CNT64;
|
|
val |= XSCALE_PMU_ENABLE;
|
|
xscale2pmu_write_pmnc(val);
|
|
raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
|
|
}
|
|
|
|
static void xscale2pmu_stop(struct arm_pmu *cpu_pmu)
|
|
{
|
|
unsigned long flags, val;
|
|
struct pmu_hw_events *events = cpu_pmu->get_hw_events();
|
|
|
|
raw_spin_lock_irqsave(&events->pmu_lock, flags);
|
|
val = xscale2pmu_read_pmnc();
|
|
val &= ~XSCALE_PMU_ENABLE;
|
|
xscale2pmu_write_pmnc(val);
|
|
raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
|
|
}
|
|
|
|
static inline u32 xscale2pmu_read_counter(struct perf_event *event)
|
|
{
|
|
struct hw_perf_event *hwc = &event->hw;
|
|
int counter = hwc->idx;
|
|
u32 val = 0;
|
|
|
|
switch (counter) {
|
|
case XSCALE_CYCLE_COUNTER:
|
|
asm volatile("mrc p14, 0, %0, c1, c1, 0" : "=r" (val));
|
|
break;
|
|
case XSCALE_COUNTER0:
|
|
asm volatile("mrc p14, 0, %0, c0, c2, 0" : "=r" (val));
|
|
break;
|
|
case XSCALE_COUNTER1:
|
|
asm volatile("mrc p14, 0, %0, c1, c2, 0" : "=r" (val));
|
|
break;
|
|
case XSCALE_COUNTER2:
|
|
asm volatile("mrc p14, 0, %0, c2, c2, 0" : "=r" (val));
|
|
break;
|
|
case XSCALE_COUNTER3:
|
|
asm volatile("mrc p14, 0, %0, c3, c2, 0" : "=r" (val));
|
|
break;
|
|
}
|
|
|
|
return val;
|
|
}
|
|
|
|
static inline void xscale2pmu_write_counter(struct perf_event *event, u32 val)
|
|
{
|
|
struct hw_perf_event *hwc = &event->hw;
|
|
int counter = hwc->idx;
|
|
|
|
switch (counter) {
|
|
case XSCALE_CYCLE_COUNTER:
|
|
asm volatile("mcr p14, 0, %0, c1, c1, 0" : : "r" (val));
|
|
break;
|
|
case XSCALE_COUNTER0:
|
|
asm volatile("mcr p14, 0, %0, c0, c2, 0" : : "r" (val));
|
|
break;
|
|
case XSCALE_COUNTER1:
|
|
asm volatile("mcr p14, 0, %0, c1, c2, 0" : : "r" (val));
|
|
break;
|
|
case XSCALE_COUNTER2:
|
|
asm volatile("mcr p14, 0, %0, c2, c2, 0" : : "r" (val));
|
|
break;
|
|
case XSCALE_COUNTER3:
|
|
asm volatile("mcr p14, 0, %0, c3, c2, 0" : : "r" (val));
|
|
break;
|
|
}
|
|
}
|
|
|
|
static int xscale2pmu_init(struct arm_pmu *cpu_pmu)
|
|
{
|
|
cpu_pmu->name = "armv5_xscale2";
|
|
cpu_pmu->handle_irq = xscale2pmu_handle_irq;
|
|
cpu_pmu->enable = xscale2pmu_enable_event;
|
|
cpu_pmu->disable = xscale2pmu_disable_event;
|
|
cpu_pmu->read_counter = xscale2pmu_read_counter;
|
|
cpu_pmu->write_counter = xscale2pmu_write_counter;
|
|
cpu_pmu->get_event_idx = xscale2pmu_get_event_idx;
|
|
cpu_pmu->start = xscale2pmu_start;
|
|
cpu_pmu->stop = xscale2pmu_stop;
|
|
cpu_pmu->map_event = xscale_map_event;
|
|
cpu_pmu->num_events = 5;
|
|
cpu_pmu->max_period = (1LLU << 32) - 1;
|
|
|
|
return 0;
|
|
}
|
|
#else
|
|
static inline int xscale1pmu_init(struct arm_pmu *cpu_pmu)
|
|
{
|
|
return -ENODEV;
|
|
}
|
|
|
|
static inline int xscale2pmu_init(struct arm_pmu *cpu_pmu)
|
|
{
|
|
return -ENODEV;
|
|
}
|
|
#endif /* CONFIG_CPU_XSCALE */
|