korg/linux
0
0
Fork 0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-11-15 08:14:15 +08:00
Code Issues Packages Projects Releases Wiki Activity
c86e0209dc
linux/arch/powerpc/kernel/head_8xx.S
Christophe Leroy 1e35eba405 powerpc/8xx: Fix pinned TLBs with CONFIG_STRICT_KERNEL_RWX 
As spotted and explained in commit c12ab8dbc4 ("powerpc/8xx: Fix
Oops with STRICT_KERNEL_RWX without DEBUG_RODATA_TEST"), the selection
of STRICT_KERNEL_RWX without selecting DEBUG_RODATA_TEST has spotted
the lack of the DIRTY bit in the pinned kernel data TLBs.

This problem should have been detected a lot earlier if things had
been working as expected. But due to an incredible level of chance or
mishap, this went undetected because of a set of bugs: In fact the
DTLBs were not pinned, because instead of setting the reserve bit
in MD_CTR, it was set in MI_CTR that is the register for ITLBs.

But then, another huge bug was there: the physical address was
reset to 0 at the boundary between RO and RW areas, leading to the
same physical space being mapped at both 0xc0000000 and 0xc8000000.
This had by miracle no consequence until now because the entry was
not really pinned so it was overwritten soon enough to go undetected.

Of course, now that we really pin the DTLBs, it must be fixed as well.

Fixes: f76c8f6d25 ("powerpc/8xx: Add function to set pinned TLBs")
Cc: stable@vger.kernel.org # v5.8+
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Depends-on: c12ab8dbc4 ("powerpc/8xx: Fix Oops with STRICT_KERNEL_RWX without DEBUG_RODATA_TEST")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/a21e9a057fe2d247a535aff0d157a54eefee017a.1636963688.git.christophe.leroy@csgroup.eu
2021-11-16 21:37:10 +11:00

790 lines
22 KiB
ArmAsm
Raw Blame History

/* SPDX-License-Identifier: GPL-2.0-or-later */
/*
* PowerPC version
* Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
* Rewritten by Cort Dougan (cort@cs.nmt.edu) for PReP
* Copyright (C) 1996 Cort Dougan <cort@cs.nmt.edu>
* Low-level exception handlers and MMU support
* rewritten by Paul Mackerras.
* Copyright (C) 1996 Paul Mackerras.
* MPC8xx modifications by Dan Malek
* Copyright (C) 1997 Dan Malek (dmalek@jlc.net).
*
* This file contains low-level support and setup for PowerPC 8xx
* embedded processors, including trap and interrupt dispatch.
*/
#include <linux/init.h>
#include <linux/magic.h>
#include <linux/pgtable.h>
#include <linux/sizes.h>
#include <asm/processor.h>
#include <asm/page.h>
#include <asm/mmu.h>
#include <asm/cache.h>
#include <asm/cputable.h>
#include <asm/thread_info.h>
#include <asm/ppc_asm.h>
#include <asm/asm-offsets.h>
#include <asm/ptrace.h>
#include <asm/export.h>
#include <asm/code-patching-asm.h>
#include <asm/interrupt.h>
/*
* Value for the bits that have fixed value in RPN entries.
* Also used for tagging DAR for DTLBerror.
*/
#define RPN_PATTERN 0x00f0
#include "head_32.h"
.macro compare_to_kernel_boundary scratch, addr
#if CONFIG_TASK_SIZE <= 0x80000000 && CONFIG_PAGE_OFFSET >= 0x80000000
/* By simply checking Address >= 0x80000000, we know if its a kernel address */
not. \scratch, \addr
#else
rlwinm \scratch, \addr, 16, 0xfff8
cmpli cr0, \scratch, PAGE_OFFSET@h
#endif
.endm
#define PAGE_SHIFT_512K 19
#define PAGE_SHIFT_8M 23
__HEAD
_ENTRY(_stext);
_ENTRY(_start);
/* MPC8xx
* This port was done on an MBX board with an 860. Right now I only
* support an ELF compressed (zImage) boot from EPPC-Bug because the
* code there loads up some registers before calling us:
* r3: ptr to board info data
* r4: initrd_start or if no initrd then 0
* r5: initrd_end - unused if r4 is 0
* r6: Start of command line string
* r7: End of command line string
*
* I decided to use conditional compilation instead of checking PVR and
* adding more processor specific branches around code I don't need.
* Since this is an embedded processor, I also appreciate any memory
* savings I can get.
*
* The MPC8xx does not have any BATs, but it supports large page sizes.
* We first initialize the MMU to support 8M byte pages, then load one
* entry into each of the instruction and data TLBs to map the first
* 8M 1:1. I also mapped an additional I/O space 1:1 so we can get to
* the "internal" processor registers before MMU_init is called.
*
* -- Dan
*/
.globl __start
__start:
mr r31,r3 /* save device tree ptr */
/* We have to turn on the MMU right away so we get cache modes
* set correctly.
*/
bl initial_mmu
/* We now have the lower 8 Meg mapped into TLB entries, and the caches
* ready to work.
*/
turn_on_mmu:
mfmsr r0
ori r0,r0,MSR_DR|MSR_IR
mtspr SPRN_SRR1,r0
lis r0,start_here@h
ori r0,r0,start_here@l
mtspr SPRN_SRR0,r0
rfi /* enables MMU */
#ifdef CONFIG_PERF_EVENTS
.align 4
.globl itlb_miss_counter
itlb_miss_counter:
.space 4
.globl dtlb_miss_counter
dtlb_miss_counter:
.space 4
.globl instruction_counter
instruction_counter:
.space 4
#endif
/* System reset */
EXCEPTION(INTERRUPT_SYSTEM_RESET, Reset, system_reset_exception)
/* Machine check */
START_EXCEPTION(INTERRUPT_MACHINE_CHECK, MachineCheck)
EXCEPTION_PROLOG INTERRUPT_MACHINE_CHECK MachineCheck handle_dar_dsisr=1
prepare_transfer_to_handler
bl machine_check_exception
b interrupt_return
/* External interrupt */
EXCEPTION(INTERRUPT_EXTERNAL, HardwareInterrupt, do_IRQ)
/* Alignment exception */
START_EXCEPTION(INTERRUPT_ALIGNMENT, Alignment)
EXCEPTION_PROLOG INTERRUPT_ALIGNMENT Alignment handle_dar_dsisr=1
prepare_transfer_to_handler
bl alignment_exception
REST_NVGPRS(r1)
b interrupt_return
/* Program check exception */
START_EXCEPTION(INTERRUPT_PROGRAM, ProgramCheck)
EXCEPTION_PROLOG INTERRUPT_PROGRAM ProgramCheck
prepare_transfer_to_handler
bl program_check_exception
REST_NVGPRS(r1)
b interrupt_return
/* Decrementer */
EXCEPTION(INTERRUPT_DECREMENTER, Decrementer, timer_interrupt)
/* System call */
START_EXCEPTION(INTERRUPT_SYSCALL, SystemCall)
SYSCALL_ENTRY INTERRUPT_SYSCALL
/* Single step - not used on 601 */
EXCEPTION(INTERRUPT_TRACE, SingleStep, single_step_exception)
/* On the MPC8xx, this is a software emulation interrupt. It occurs
* for all unimplemented and illegal instructions.
*/
START_EXCEPTION(INTERRUPT_SOFT_EMU_8xx, SoftEmu)
EXCEPTION_PROLOG INTERRUPT_SOFT_EMU_8xx SoftEmu
prepare_transfer_to_handler
bl emulation_assist_interrupt
REST_NVGPRS(r1)
b interrupt_return
/*
* For the MPC8xx, this is a software tablewalk to load the instruction
* TLB. The task switch loads the M_TWB register with the pointer to the first
* level table.
* If we discover there is no second level table (value is zero) or if there
* is an invalid pte, we load that into the TLB, which causes another fault
* into the TLB Error interrupt where we can handle such problems.
* We have to use the MD_xxx registers for the tablewalk because the
* equivalent MI_xxx registers only perform the attribute functions.
*/
#ifdef CONFIG_8xx_CPU15
#define INVALIDATE_ADJACENT_PAGES_CPU15(addr, tmp) \
addi tmp, addr, PAGE_SIZE; \
tlbie tmp; \
addi tmp, addr, -PAGE_SIZE; \
tlbie tmp
#else
#define INVALIDATE_ADJACENT_PAGES_CPU15(addr, tmp)
#endif
START_EXCEPTION(INTERRUPT_INST_TLB_MISS_8xx, InstructionTLBMiss)
mtspr SPRN_SPRG_SCRATCH2, r10
mtspr SPRN_M_TW, r11
/* If we are faulting a kernel address, we have to use the
* kernel page tables.
*/
mfspr r10, SPRN_SRR0 /* Get effective address of fault */
INVALIDATE_ADJACENT_PAGES_CPU15(r10, r11)
mtspr SPRN_MD_EPN, r10
#ifdef CONFIG_MODULES
mfcr r11
compare_to_kernel_boundary r10, r10
#endif
mfspr r10, SPRN_M_TWB /* Get level 1 table */
#ifdef CONFIG_MODULES
blt+ 3f
rlwinm r10, r10, 0, 20, 31
oris r10, r10, (swapper_pg_dir - PAGE_OFFSET)@ha
3:
mtcr r11
#endif
lwz r11, (swapper_pg_dir-PAGE_OFFSET)@l(r10) /* Get level 1 entry */
mtspr SPRN_MD_TWC, r11
mfspr r10, SPRN_MD_TWC
lwz r10, 0(r10) /* Get the pte */
rlwimi r11, r10, 0, _PAGE_GUARDED | _PAGE_ACCESSED
rlwimi r11, r10, 32 - 9, _PMD_PAGE_512K
mtspr SPRN_MI_TWC, r11
/* The Linux PTE won't go exactly into the MMU TLB.
* Software indicator bits 20 and 23 must be clear.
* Software indicator bits 22, 24, 25, 26, and 27 must be
* set. All other Linux PTE bits control the behavior
* of the MMU.
*/
rlwinm r10, r10, 0, ~0x0f00 /* Clear bits 20-23 */
rlwimi r10, r10, 4, 0x0400 /* Copy _PAGE_EXEC into bit 21 */
ori r10, r10, RPN_PATTERN | 0x200 /* Set 22 and 24-27 */
mtspr SPRN_MI_RPN, r10 /* Update TLB entry */
/* Restore registers */
0: mfspr r10, SPRN_SPRG_SCRATCH2
mfspr r11, SPRN_M_TW
rfi
patch_site 0b, patch__itlbmiss_exit_1
#ifdef CONFIG_PERF_EVENTS
patch_site 0f, patch__itlbmiss_perf
0: lwz r10, (itlb_miss_counter - PAGE_OFFSET)@l(0)
addi r10, r10, 1
stw r10, (itlb_miss_counter - PAGE_OFFSET)@l(0)
mfspr r10, SPRN_SPRG_SCRATCH2
mfspr r11, SPRN_M_TW
rfi
#endif
START_EXCEPTION(INTERRUPT_DATA_TLB_MISS_8xx, DataStoreTLBMiss)
mtspr SPRN_SPRG_SCRATCH2, r10
mtspr SPRN_M_TW, r11
mfcr r11
/* If we are faulting a kernel address, we have to use the
* kernel page tables.
*/
mfspr r10, SPRN_MD_EPN
compare_to_kernel_boundary r10, r10
mfspr r10, SPRN_M_TWB /* Get level 1 table */
blt+ 3f
rlwinm r10, r10, 0, 20, 31
oris r10, r10, (swapper_pg_dir - PAGE_OFFSET)@ha
3:
mtcr r11
lwz r11, (swapper_pg_dir-PAGE_OFFSET)@l(r10) /* Get level 1 entry */
mtspr SPRN_MD_TWC, r11
mfspr r10, SPRN_MD_TWC
lwz r10, 0(r10) /* Get the pte */
/* Insert Guarded and Accessed flags into the TWC from the Linux PTE.
* It is bit 27 of both the Linux PTE and the TWC (at least
* I got that right :-). It will be better when we can put
* this into the Linux pgd/pmd and load it in the operation
* above.
*/
rlwimi r11, r10, 0, _PAGE_GUARDED | _PAGE_ACCESSED
rlwimi r11, r10, 32 - 9, _PMD_PAGE_512K
mtspr SPRN_MD_TWC, r11
/* The Linux PTE won't go exactly into the MMU TLB.
* Software indicator bits 24, 25, 26, and 27 must be
* set. All other Linux PTE bits control the behavior
* of the MMU.
*/
li r11, RPN_PATTERN
rlwimi r10, r11, 0, 24, 27 /* Set 24-27 */
mtspr SPRN_MD_RPN, r10 /* Update TLB entry */
mtspr SPRN_DAR, r11 /* Tag DAR */
/* Restore registers */
0: mfspr r10, SPRN_SPRG_SCRATCH2
mfspr r11, SPRN_M_TW
rfi
patch_site 0b, patch__dtlbmiss_exit_1
#ifdef CONFIG_PERF_EVENTS
patch_site 0f, patch__dtlbmiss_perf
0: lwz r10, (dtlb_miss_counter - PAGE_OFFSET)@l(0)
addi r10, r10, 1
stw r10, (dtlb_miss_counter - PAGE_OFFSET)@l(0)
mfspr r10, SPRN_SPRG_SCRATCH2
mfspr r11, SPRN_M_TW
rfi
#endif
/* This is an instruction TLB error on the MPC8xx. This could be due
* to many reasons, such as executing guarded memory or illegal instruction
* addresses. There is nothing to do but handle a big time error fault.
*/
START_EXCEPTION(INTERRUPT_INST_TLB_ERROR_8xx, InstructionTLBError)
/* 0x400 is InstructionAccess exception, needed by bad_page_fault() */
EXCEPTION_PROLOG INTERRUPT_INST_STORAGE InstructionTLBError
andis. r5,r9,DSISR_SRR1_MATCH_32S@h /* Filter relevant SRR1 bits */
andis. r10,r9,SRR1_ISI_NOPT@h
beq+ .Litlbie
tlbie r12
.Litlbie:
stw r12, _DAR(r11)
stw r5, _DSISR(r11)
prepare_transfer_to_handler
bl do_page_fault
b interrupt_return
/* This is the data TLB error on the MPC8xx. This could be due to
* many reasons, including a dirty update to a pte. We bail out to
* a higher level function that can handle it.
*/
START_EXCEPTION(INTERRUPT_DATA_TLB_ERROR_8xx, DataTLBError)
EXCEPTION_PROLOG_0 handle_dar_dsisr=1
mfspr r11, SPRN_DAR
cmpwi cr1, r11, RPN_PATTERN
beq- cr1, FixupDAR /* must be a buggy dcbX, icbi insn. */
DARFixed:/* Return from dcbx instruction bug workaround */
EXCEPTION_PROLOG_1
/* 0x300 is DataAccess exception, needed by bad_page_fault() */
EXCEPTION_PROLOG_2 INTERRUPT_DATA_STORAGE DataTLBError handle_dar_dsisr=1
lwz r4, _DAR(r11)
lwz r5, _DSISR(r11)
andis. r10,r5,DSISR_NOHPTE@h
beq+ .Ldtlbie
tlbie r4
.Ldtlbie:
prepare_transfer_to_handler
bl do_page_fault
b interrupt_return
#ifdef CONFIG_VMAP_STACK
vmap_stack_overflow_exception
#endif
/* On the MPC8xx, these next four traps are used for development
* support of breakpoints and such. Someday I will get around to
* using them.
*/
START_EXCEPTION(INTERRUPT_DATA_BREAKPOINT_8xx, DataBreakpoint)
EXCEPTION_PROLOG_0 handle_dar_dsisr=1
mfspr r11, SPRN_SRR0
cmplwi cr1, r11, (.Ldtlbie - PAGE_OFFSET)@l
cmplwi cr7, r11, (.Litlbie - PAGE_OFFSET)@l
cror 4*cr1+eq, 4*cr1+eq, 4*cr7+eq
bne cr1, 1f
mtcr r10
mfspr r10, SPRN_SPRG_SCRATCH0
mfspr r11, SPRN_SPRG_SCRATCH1
rfi
1: EXCEPTION_PROLOG_1
EXCEPTION_PROLOG_2 INTERRUPT_DATA_BREAKPOINT_8xx DataBreakpoint handle_dar_dsisr=1
mfspr r4,SPRN_BAR
stw r4,_DAR(r11)
prepare_transfer_to_handler
bl do_break
REST_NVGPRS(r1)
b interrupt_return
#ifdef CONFIG_PERF_EVENTS
START_EXCEPTION(INTERRUPT_INST_BREAKPOINT_8xx, InstructionBreakpoint)
mtspr SPRN_SPRG_SCRATCH0, r10
lwz r10, (instruction_counter - PAGE_OFFSET)@l(0)
addi r10, r10, -1
stw r10, (instruction_counter - PAGE_OFFSET)@l(0)
lis r10, 0xffff
ori r10, r10, 0x01
mtspr SPRN_COUNTA, r10
mfspr r10, SPRN_SPRG_SCRATCH0
rfi
#else
EXCEPTION(INTERRUPT_INST_BREAKPOINT_8xx, Trap_1d, unknown_exception)
#endif
EXCEPTION(0x1e00, Trap_1e, unknown_exception)
EXCEPTION(0x1f00, Trap_1f, unknown_exception)
__HEAD
. = 0x2000
/* This is the procedure to calculate the data EA for buggy dcbx,dcbi instructions
* by decoding the registers used by the dcbx instruction and adding them.
* DAR is set to the calculated address.
*/
FixupDAR:/* Entry point for dcbx workaround. */
mtspr SPRN_M_TW, r10
/* fetch instruction from memory. */
mfspr r10, SPRN_SRR0
mtspr SPRN_MD_EPN, r10
rlwinm r11, r10, 16, 0xfff8
cmpli cr1, r11, PAGE_OFFSET@h
mfspr r11, SPRN_M_TWB /* Get level 1 table */
blt+ cr1, 3f
/* create physical page address from effective address */
tophys(r11, r10)
mfspr r11, SPRN_M_TWB /* Get level 1 table */
rlwinm r11, r11, 0, 20, 31
oris r11, r11, (swapper_pg_dir - PAGE_OFFSET)@ha
3:
lwz r11, (swapper_pg_dir-PAGE_OFFSET)@l(r11) /* Get the level 1 entry */
mtspr SPRN_MD_TWC, r11
mtcrf 0x01, r11
mfspr r11, SPRN_MD_TWC
lwz r11, 0(r11) /* Get the pte */
bt 28,200f /* bit 28 = Large page (8M) */
/* concat physical page address(r11) and page offset(r10) */
rlwimi r11, r10, 0, 32 - PAGE_SHIFT, 31
201: lwz r11,0(r11)
/* Check if it really is a dcbx instruction. */
/* dcbt and dcbtst does not generate DTLB Misses/Errors,
* no need to include them here */
xoris r10, r11, 0x7c00 /* check if major OP code is 31 */
rlwinm r10, r10, 0, 21, 5
cmpwi cr1, r10, 2028 /* Is dcbz? */
beq+ cr1, 142f
cmpwi cr1, r10, 940 /* Is dcbi? */
beq+ cr1, 142f
cmpwi cr1, r10, 108 /* Is dcbst? */
beq+ cr1, 144f /* Fix up store bit! */
cmpwi cr1, r10, 172 /* Is dcbf? */
beq+ cr1, 142f
cmpwi cr1, r10, 1964 /* Is icbi? */
beq+ cr1, 142f
141: mfspr r10,SPRN_M_TW
b DARFixed /* Nope, go back to normal TLB processing */
200:
/* concat physical page address(r11) and page offset(r10) */
rlwimi r11, r10, 0, 32 - PAGE_SHIFT_8M, 31
b 201b
144: mfspr r10, SPRN_DSISR
rlwinm r10, r10,0,7,5 /* Clear store bit for buggy dcbst insn */
mtspr SPRN_DSISR, r10
142: /* continue, it was a dcbx, dcbi instruction. */
mfctr r10
mtdar r10 /* save ctr reg in DAR */
rlwinm r10, r11, 24, 24, 28 /* offset into jump table for reg RB */
addi r10, r10, 150f@l /* add start of table */
mtctr r10 /* load ctr with jump address */
xor r10, r10, r10 /* sum starts at zero */
bctr /* jump into table */
150:
add r10, r10, r0 ;b 151f
add r10, r10, r1 ;b 151f
add r10, r10, r2 ;b 151f
add r10, r10, r3 ;b 151f
add r10, r10, r4 ;b 151f
add r10, r10, r5 ;b 151f
add r10, r10, r6 ;b 151f
add r10, r10, r7 ;b 151f
add r10, r10, r8 ;b 151f
add r10, r10, r9 ;b 151f
mtctr r11 ;b 154f /* r10 needs special handling */
mtctr r11 ;b 153f /* r11 needs special handling */
add r10, r10, r12 ;b 151f
add r10, r10, r13 ;b 151f
add r10, r10, r14 ;b 151f
add r10, r10, r15 ;b 151f
add r10, r10, r16 ;b 151f
add r10, r10, r17 ;b 151f
add r10, r10, r18 ;b 151f
add r10, r10, r19 ;b 151f
add r10, r10, r20 ;b 151f
add r10, r10, r21 ;b 151f
add r10, r10, r22 ;b 151f
add r10, r10, r23 ;b 151f
add r10, r10, r24 ;b 151f
add r10, r10, r25 ;b 151f
add r10, r10, r26 ;b 151f
add r10, r10, r27 ;b 151f
add r10, r10, r28 ;b 151f
add r10, r10, r29 ;b 151f
add r10, r10, r30 ;b 151f
add r10, r10, r31
151:
rlwinm r11,r11,19,24,28 /* offset into jump table for reg RA */
cmpwi cr1, r11, 0
beq cr1, 152f /* if reg RA is zero, don't add it */
addi r11, r11, 150b@l /* add start of table */
mtctr r11 /* load ctr with jump address */
rlwinm r11,r11,0,16,10 /* make sure we don't execute this more than once */
bctr /* jump into table */
152:
mfdar r11
mtctr r11 /* restore ctr reg from DAR */
mfspr r11, SPRN_SPRG_THREAD
stw r10, DAR(r11)
mfspr r10, SPRN_DSISR
stw r10, DSISR(r11)
mfspr r10,SPRN_M_TW
b DARFixed /* Go back to normal TLB handling */
/* special handling for r10,r11 since these are modified already */
153: mfspr r11, SPRN_SPRG_SCRATCH1 /* load r11 from SPRN_SPRG_SCRATCH1 */
add r10, r10, r11 /* add it */
mfctr r11 /* restore r11 */
b 151b
154: mfspr r11, SPRN_SPRG_SCRATCH0 /* load r10 from SPRN_SPRG_SCRATCH0 */
add r10, r10, r11 /* add it */
mfctr r11 /* restore r11 */
b 151b
/*
* This is where the main kernel code starts.
*/
start_here:
/* ptr to current */
lis r2,init_task@h
ori r2,r2,init_task@l
/* ptr to phys current thread */
tophys(r4,r2)
addi r4,r4,THREAD /* init task's THREAD */
mtspr SPRN_SPRG_THREAD,r4
/* stack */
lis r1,init_thread_union@ha
addi r1,r1,init_thread_union@l
lis r0, STACK_END_MAGIC@h
ori r0, r0, STACK_END_MAGIC@l
stw r0, 0(r1)
li r0,0
stwu r0,THREAD_SIZE-STACK_FRAME_OVERHEAD(r1)
lis r6, swapper_pg_dir@ha
tophys(r6,r6)
mtspr SPRN_M_TWB, r6
bl early_init /* We have to do this with MMU on */
/*
* Decide what sort of machine this is and initialize the MMU.
*/
#ifdef CONFIG_KASAN
bl kasan_early_init
#endif
li r3,0
mr r4,r31
bl machine_init
bl MMU_init
/*
* Go back to running unmapped so we can load up new values
* and change to using our exception vectors.
* On the 8xx, all we have to do is invalidate the TLB to clear
* the old 8M byte TLB mappings and load the page table base register.
*/
/* The right way to do this would be to track it down through
* init's THREAD like the context switch code does, but this is
* easier......until someone changes init's static structures.
*/
lis r4,2f@h
ori r4,r4,2f@l
tophys(r4,r4)
li r3,MSR_KERNEL & ~(MSR_IR|MSR_DR)
mtspr SPRN_SRR0,r4
mtspr SPRN_SRR1,r3
rfi
/* Load up the kernel context */
2:
#ifdef CONFIG_PIN_TLB_IMMR
lis r0, MD_TWAM@h
oris r0, r0, 0x1f00
mtspr SPRN_MD_CTR, r0
LOAD_REG_IMMEDIATE(r0, VIRT_IMMR_BASE | MD_EVALID)
tlbie r0
mtspr SPRN_MD_EPN, r0
LOAD_REG_IMMEDIATE(r0, MD_SVALID | MD_PS512K | MD_GUARDED)
mtspr SPRN_MD_TWC, r0
mfspr r0, SPRN_IMMR
rlwinm r0, r0, 0, 0xfff80000
ori r0, r0, 0xf0 | _PAGE_DIRTY | _PAGE_SPS | _PAGE_SH | \
_PAGE_NO_CACHE | _PAGE_PRESENT
mtspr SPRN_MD_RPN, r0
lis r0, (MD_TWAM | MD_RSV4I)@h
mtspr SPRN_MD_CTR, r0
#endif
#if !defined(CONFIG_PIN_TLB_DATA) && !defined(CONFIG_PIN_TLB_IMMR)
lis r0, MD_TWAM@h
mtspr SPRN_MD_CTR, r0
#endif
tlbia /* Clear all TLB entries */
sync /* wait for tlbia/tlbie to finish */
/* set up the PTE pointers for the Abatron bdiGDB.
*/
lis r5, abatron_pteptrs@h
ori r5, r5, abatron_pteptrs@l
stw r5, 0xf0(0) /* Must match your Abatron config file */
tophys(r5,r5)
lis r6, swapper_pg_dir@h
ori r6, r6, swapper_pg_dir@l
stw r6, 0(r5)
/* Now turn on the MMU for real! */
li r4,MSR_KERNEL
lis r3,start_kernel@h
ori r3,r3,start_kernel@l
mtspr SPRN_SRR0,r3
mtspr SPRN_SRR1,r4
rfi /* enable MMU and jump to start_kernel */
/* Set up the initial MMU state so we can do the first level of
* kernel initialization. This maps the first 8 MBytes of memory 1:1
* virtual to physical. Also, set the cache mode since that is defined
* by TLB entries and perform any additional mapping (like of the IMMR).
* If configured to pin some TLBs, we pin the first 8 Mbytes of kernel,
* 24 Mbytes of data, and the 512k IMMR space. Anything not covered by
* these mappings is mapped by page tables.
*/
initial_mmu:
li r8, 0
mtspr SPRN_MI_CTR, r8 /* remove PINNED ITLB entries */
lis r10, MD_TWAM@h
mtspr SPRN_MD_CTR, r10 /* remove PINNED DTLB entries */
tlbia /* Invalidate all TLB entries */
lis r8, MI_APG_INIT@h /* Set protection modes */
ori r8, r8, MI_APG_INIT@l
mtspr SPRN_MI_AP, r8
lis r8, MD_APG_INIT@h
ori r8, r8, MD_APG_INIT@l
mtspr SPRN_MD_AP, r8
/* Map the lower RAM (up to 32 Mbytes) into the ITLB and DTLB */
lis r8, MI_RSV4I@h
ori r8, r8, 0x1c00
oris r12, r10, MD_RSV4I@h
ori r12, r12, 0x1c00
li r9, 4 /* up to 4 pages of 8M */
mtctr r9
lis r9, KERNELBASE@h /* Create vaddr for TLB */
li r10, MI_PS8MEG | _PMD_ACCESSED | MI_SVALID
li r11, MI_BOOTINIT /* Create RPN for address 0 */
1:
mtspr SPRN_MI_CTR, r8 /* Set instruction MMU control */
addi r8, r8, 0x100
ori r0, r9, MI_EVALID /* Mark it valid */
mtspr SPRN_MI_EPN, r0
mtspr SPRN_MI_TWC, r10
mtspr SPRN_MI_RPN, r11 /* Store TLB entry */
mtspr SPRN_MD_CTR, r12
addi r12, r12, 0x100
mtspr SPRN_MD_EPN, r0
mtspr SPRN_MD_TWC, r10
mtspr SPRN_MD_RPN, r11
addis r9, r9, 0x80
addis r11, r11, 0x80
bdnz 1b
/* Since the cache is enabled according to the information we
* just loaded into the TLB, invalidate and enable the caches here.
* We should probably check/set other modes....later.
*/
lis r8, IDC_INVALL@h
mtspr SPRN_IC_CST, r8
mtspr SPRN_DC_CST, r8
lis r8, IDC_ENABLE@h
mtspr SPRN_IC_CST, r8
mtspr SPRN_DC_CST, r8
/* Disable debug mode entry on breakpoints */
mfspr r8, SPRN_DER
#ifdef CONFIG_PERF_EVENTS
rlwinm r8, r8, 0, ~0xc
#else
rlwinm r8, r8, 0, ~0x8
#endif
mtspr SPRN_DER, r8
blr
_GLOBAL(mmu_pin_tlb)
lis r9, (1f - PAGE_OFFSET)@h
ori r9, r9, (1f - PAGE_OFFSET)@l
mfmsr r10
mflr r11
li r12, MSR_KERNEL & ~(MSR_IR | MSR_DR | MSR_RI)
rlwinm r0, r10, 0, ~MSR_RI
rlwinm r0, r0, 0, ~MSR_EE
mtmsr r0
isync
.align 4
mtspr SPRN_SRR0, r9
mtspr SPRN_SRR1, r12
rfi
1:
li r5, 0
lis r6, MD_TWAM@h
mtspr SPRN_MI_CTR, r5
mtspr SPRN_MD_CTR, r6
tlbia
LOAD_REG_IMMEDIATE(r5, 28 << 8)
LOAD_REG_IMMEDIATE(r6, PAGE_OFFSET)
LOAD_REG_IMMEDIATE(r7, MI_SVALID | MI_PS8MEG | _PMD_ACCESSED)
LOAD_REG_IMMEDIATE(r8, 0xf0 | _PAGE_RO | _PAGE_SPS | _PAGE_SH | _PAGE_PRESENT)
LOAD_REG_ADDR(r9, _sinittext)
li r0, 4
mtctr r0
2: ori r0, r6, MI_EVALID
mtspr SPRN_MI_CTR, r5
mtspr SPRN_MI_EPN, r0
mtspr SPRN_MI_TWC, r7
mtspr SPRN_MI_RPN, r8
addi r5, r5, 0x100
addis r6, r6, SZ_8M@h
addis r8, r8, SZ_8M@h
cmplw r6, r9
bdnzt lt, 2b
lis r0, MI_RSV4I@h
mtspr SPRN_MI_CTR, r0
LOAD_REG_IMMEDIATE(r5, 28 << 8 | MD_TWAM)
#ifdef CONFIG_PIN_TLB_DATA
LOAD_REG_IMMEDIATE(r6, PAGE_OFFSET)
LOAD_REG_IMMEDIATE(r7, MI_SVALID | MI_PS8MEG | _PMD_ACCESSED)
li r8, 0
#ifdef CONFIG_PIN_TLB_IMMR
li r0, 3
#else
li r0, 4
#endif
mtctr r0
cmpwi r4, 0
beq 4f
LOAD_REG_ADDR(r9, _sinittext)
2: ori r0, r6, MD_EVALID
ori r12, r8, 0xf0 | _PAGE_RO | _PAGE_SPS | _PAGE_SH | _PAGE_PRESENT
mtspr SPRN_MD_CTR, r5
mtspr SPRN_MD_EPN, r0
mtspr SPRN_MD_TWC, r7
mtspr SPRN_MD_RPN, r12
addi r5, r5, 0x100
addis r6, r6, SZ_8M@h
addis r8, r8, SZ_8M@h
cmplw r6, r9
bdnzt lt, 2b
4:
2: ori r0, r6, MD_EVALID
ori r12, r8, 0xf0 | _PAGE_DIRTY | _PAGE_SPS | _PAGE_SH | _PAGE_PRESENT
mtspr SPRN_MD_CTR, r5
mtspr SPRN_MD_EPN, r0
mtspr SPRN_MD_TWC, r7
mtspr SPRN_MD_RPN, r12
addi r5, r5, 0x100
addis r6, r6, SZ_8M@h
addis r8, r8, SZ_8M@h
cmplw r6, r3
bdnzt lt, 2b
#endif
#ifdef CONFIG_PIN_TLB_IMMR
LOAD_REG_IMMEDIATE(r0, VIRT_IMMR_BASE | MD_EVALID)
LOAD_REG_IMMEDIATE(r7, MD_SVALID | MD_PS512K | MD_GUARDED | _PMD_ACCESSED)
mfspr r8, SPRN_IMMR
rlwinm r8, r8, 0, 0xfff80000
ori r8, r8, 0xf0 | _PAGE_DIRTY | _PAGE_SPS | _PAGE_SH | \
_PAGE_NO_CACHE | _PAGE_PRESENT
mtspr SPRN_MD_CTR, r5
mtspr SPRN_MD_EPN, r0
mtspr SPRN_MD_TWC, r7
mtspr SPRN_MD_RPN, r8
#endif
#if defined(CONFIG_PIN_TLB_IMMR) || defined(CONFIG_PIN_TLB_DATA)
lis r0, (MD_RSV4I | MD_TWAM)@h
mtspr SPRN_MD_CTR, r0
#endif
mtspr SPRN_SRR1, r10
mtspr SPRN_SRR0, r11
rfi
Reference in New Issue View Git Blame Copy Permalink