mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-15 08:14:15 +08:00
e72421a085
Don't duplicate swapper_pg_dir[] in each platform's head.S Define it in mm/pgtable.c Define MAX_PTRS_PER_PGD because on book3s/64 PTRS_PER_PGD is not a constant. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/5e3f1b8a4695c33ccc80aa3870e016bef32b85e1.1623063174.git.christophe.leroy@csgroup.eu
704 lines
20 KiB
ArmAsm
704 lines
20 KiB
ArmAsm
/* SPDX-License-Identifier: GPL-2.0-or-later */
|
|
/*
|
|
* Copyright (c) 1995-1996 Gary Thomas <gdt@linuxppc.org>
|
|
* Initial PowerPC version.
|
|
* Copyright (c) 1996 Cort Dougan <cort@cs.nmt.edu>
|
|
* Rewritten for PReP
|
|
* Copyright (c) 1996 Paul Mackerras <paulus@cs.anu.edu.au>
|
|
* Low-level exception handers, MMU support, and rewrite.
|
|
* Copyright (c) 1997 Dan Malek <dmalek@jlc.net>
|
|
* PowerPC 8xx modifications.
|
|
* Copyright (c) 1998-1999 TiVo, Inc.
|
|
* PowerPC 403GCX modifications.
|
|
* Copyright (c) 1999 Grant Erickson <grant@lcse.umn.edu>
|
|
* PowerPC 403GCX/405GP modifications.
|
|
* Copyright 2000 MontaVista Software Inc.
|
|
* PPC405 modifications
|
|
* PowerPC 403GCX/405GP modifications.
|
|
* Author: MontaVista Software, Inc.
|
|
* frank_rowand@mvista.com or source@mvista.com
|
|
* debbie_chu@mvista.com
|
|
*
|
|
* Module name: head_4xx.S
|
|
*
|
|
* Description:
|
|
* Kernel execution entry point code.
|
|
*/
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/pgtable.h>
|
|
#include <asm/processor.h>
|
|
#include <asm/page.h>
|
|
#include <asm/mmu.h>
|
|
#include <asm/cputable.h>
|
|
#include <asm/thread_info.h>
|
|
#include <asm/ppc_asm.h>
|
|
#include <asm/asm-offsets.h>
|
|
#include <asm/ptrace.h>
|
|
#include <asm/export.h>
|
|
|
|
#include "head_32.h"
|
|
|
|
/* As with the other PowerPC ports, it is expected that when code
|
|
* execution begins here, the following registers contain valid, yet
|
|
* optional, information:
|
|
*
|
|
* r3 - Board info structure pointer (DRAM, frequency, MAC address, etc.)
|
|
* r4 - Starting address of the init RAM disk
|
|
* r5 - Ending address of the init RAM disk
|
|
* r6 - Start of kernel command line string (e.g. "mem=96m")
|
|
* r7 - End of kernel command line string
|
|
*
|
|
* This is all going to change RSN when we add bi_recs....... -- Dan
|
|
*/
|
|
__HEAD
|
|
_ENTRY(_stext);
|
|
_ENTRY(_start);
|
|
|
|
mr r31,r3 /* save device tree ptr */
|
|
|
|
/* We have to turn on the MMU right away so we get cache modes
|
|
* set correctly.
|
|
*/
|
|
bl initial_mmu
|
|
|
|
/* We now have the lower 16 Meg mapped into TLB entries, and the caches
|
|
* ready to work.
|
|
*/
|
|
turn_on_mmu:
|
|
lis r0,MSR_KERNEL@h
|
|
ori r0,r0,MSR_KERNEL@l
|
|
mtspr SPRN_SRR1,r0
|
|
lis r0,start_here@h
|
|
ori r0,r0,start_here@l
|
|
mtspr SPRN_SRR0,r0
|
|
rfi /* enables MMU */
|
|
b . /* prevent prefetch past rfi */
|
|
|
|
/*
|
|
* This area is used for temporarily saving registers during the
|
|
* critical exception prolog.
|
|
*/
|
|
. = 0xc0
|
|
crit_save:
|
|
_ENTRY(crit_r10)
|
|
.space 4
|
|
_ENTRY(crit_r11)
|
|
.space 4
|
|
_ENTRY(crit_srr0)
|
|
.space 4
|
|
_ENTRY(crit_srr1)
|
|
.space 4
|
|
_ENTRY(crit_r1)
|
|
.space 4
|
|
_ENTRY(crit_dear)
|
|
.space 4
|
|
_ENTRY(crit_esr)
|
|
.space 4
|
|
|
|
/*
|
|
* Exception prolog for critical exceptions. This is a little different
|
|
* from the normal exception prolog above since a critical exception
|
|
* can potentially occur at any point during normal exception processing.
|
|
* Thus we cannot use the same SPRG registers as the normal prolog above.
|
|
* Instead we use a couple of words of memory at low physical addresses.
|
|
* This is OK since we don't support SMP on these processors.
|
|
*/
|
|
.macro CRITICAL_EXCEPTION_PROLOG trapno name
|
|
stw r10,crit_r10@l(0) /* save two registers to work with */
|
|
stw r11,crit_r11@l(0)
|
|
mfspr r10,SPRN_SRR0
|
|
mfspr r11,SPRN_SRR1
|
|
stw r10,crit_srr0@l(0)
|
|
stw r11,crit_srr1@l(0)
|
|
mfspr r10,SPRN_DEAR
|
|
mfspr r11,SPRN_ESR
|
|
stw r10,crit_dear@l(0)
|
|
stw r11,crit_esr@l(0)
|
|
mfcr r10 /* save CR in r10 for now */
|
|
mfspr r11,SPRN_SRR3 /* check whether user or kernel */
|
|
andi. r11,r11,MSR_PR
|
|
lis r11,(critirq_ctx-PAGE_OFFSET)@ha
|
|
lwz r11,(critirq_ctx-PAGE_OFFSET)@l(r11)
|
|
beq 1f
|
|
/* COMING FROM USER MODE */
|
|
mfspr r11,SPRN_SPRG_THREAD /* if from user, start at top of */
|
|
lwz r11,TASK_STACK-THREAD(r11) /* this thread's kernel stack */
|
|
1: stw r1,crit_r1@l(0)
|
|
addi r1,r11,THREAD_SIZE-INT_FRAME_SIZE /* Alloc an excpt frm */
|
|
LOAD_REG_IMMEDIATE(r11, MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)) /* re-enable MMU */
|
|
mtspr SPRN_SRR1, r11
|
|
lis r11, 1f@h
|
|
ori r11, r11, 1f@l
|
|
mtspr SPRN_SRR0, r11
|
|
rfi
|
|
|
|
.text
|
|
1:
|
|
\name\()_virt:
|
|
lwz r11,crit_r1@l(0)
|
|
stw r11,GPR1(r1)
|
|
stw r11,0(r1)
|
|
mr r11,r1
|
|
stw r10,_CCR(r11) /* save various registers */
|
|
stw r12,GPR12(r11)
|
|
stw r9,GPR9(r11)
|
|
mflr r10
|
|
stw r10,_LINK(r11)
|
|
lis r9,PAGE_OFFSET@ha
|
|
lwz r10,crit_r10@l(r9)
|
|
lwz r12,crit_r11@l(r9)
|
|
stw r10,GPR10(r11)
|
|
stw r12,GPR11(r11)
|
|
lwz r12,crit_dear@l(r9)
|
|
lwz r9,crit_esr@l(r9)
|
|
stw r12,_DEAR(r11) /* since they may have had stuff */
|
|
stw r9,_ESR(r11) /* exception was taken */
|
|
mfspr r12,SPRN_SRR2
|
|
mfspr r9,SPRN_SRR3
|
|
rlwinm r9,r9,0,14,12 /* clear MSR_WE (necessary?) */
|
|
COMMON_EXCEPTION_PROLOG_END \trapno + 2
|
|
_ASM_NOKPROBE_SYMBOL(\name\()_virt)
|
|
.endm
|
|
|
|
/*
|
|
* State at this point:
|
|
* r9 saved in stack frame, now saved SRR3 & ~MSR_WE
|
|
* r10 saved in crit_r10 and in stack frame, trashed
|
|
* r11 saved in crit_r11 and in stack frame,
|
|
* now phys stack/exception frame pointer
|
|
* r12 saved in stack frame, now saved SRR2
|
|
* CR saved in stack frame, CR0.EQ = !SRR3.PR
|
|
* LR, DEAR, ESR in stack frame
|
|
* r1 saved in stack frame, now virt stack/excframe pointer
|
|
* r0, r3-r8 saved in stack frame
|
|
*/
|
|
|
|
/*
|
|
* Exception vectors.
|
|
*/
|
|
#define CRITICAL_EXCEPTION(n, label, hdlr) \
|
|
START_EXCEPTION(n, label); \
|
|
CRITICAL_EXCEPTION_PROLOG n label; \
|
|
prepare_transfer_to_handler; \
|
|
bl hdlr; \
|
|
b ret_from_crit_exc
|
|
|
|
/*
|
|
* 0x0100 - Critical Interrupt Exception
|
|
*/
|
|
CRITICAL_EXCEPTION(0x0100, CriticalInterrupt, unknown_exception)
|
|
|
|
/*
|
|
* 0x0200 - Machine Check Exception
|
|
*/
|
|
CRITICAL_EXCEPTION(0x0200, MachineCheck, machine_check_exception)
|
|
|
|
/*
|
|
* 0x0300 - Data Storage Exception
|
|
* This happens for just a few reasons. U0 set (but we don't do that),
|
|
* or zone protection fault (user violation, write to protected page).
|
|
* The other Data TLB exceptions bail out to this point
|
|
* if they can't resolve the lightweight TLB fault.
|
|
*/
|
|
START_EXCEPTION(0x0300, DataStorage)
|
|
EXCEPTION_PROLOG 0x300 DataStorage handle_dar_dsisr=1
|
|
prepare_transfer_to_handler
|
|
bl do_page_fault
|
|
b interrupt_return
|
|
|
|
/*
|
|
* 0x0400 - Instruction Storage Exception
|
|
* This is caused by a fetch from non-execute or guarded pages.
|
|
*/
|
|
START_EXCEPTION(0x0400, InstructionAccess)
|
|
EXCEPTION_PROLOG 0x400 InstructionAccess
|
|
li r5,0
|
|
stw r5, _ESR(r11) /* Zero ESR */
|
|
stw r12, _DEAR(r11) /* SRR0 as DEAR */
|
|
prepare_transfer_to_handler
|
|
bl do_page_fault
|
|
b interrupt_return
|
|
|
|
/* 0x0500 - External Interrupt Exception */
|
|
EXCEPTION(0x0500, HardwareInterrupt, do_IRQ)
|
|
|
|
/* 0x0600 - Alignment Exception */
|
|
START_EXCEPTION(0x0600, Alignment)
|
|
EXCEPTION_PROLOG 0x600 Alignment handle_dar_dsisr=1
|
|
prepare_transfer_to_handler
|
|
bl alignment_exception
|
|
REST_NVGPRS(r1)
|
|
b interrupt_return
|
|
|
|
/* 0x0700 - Program Exception */
|
|
START_EXCEPTION(0x0700, ProgramCheck)
|
|
EXCEPTION_PROLOG 0x700 ProgramCheck handle_dar_dsisr=1
|
|
prepare_transfer_to_handler
|
|
bl program_check_exception
|
|
REST_NVGPRS(r1)
|
|
b interrupt_return
|
|
|
|
EXCEPTION(0x0800, Trap_08, unknown_exception)
|
|
EXCEPTION(0x0900, Trap_09, unknown_exception)
|
|
EXCEPTION(0x0A00, Trap_0A, unknown_exception)
|
|
EXCEPTION(0x0B00, Trap_0B, unknown_exception)
|
|
|
|
/* 0x0C00 - System Call Exception */
|
|
START_EXCEPTION(0x0C00, SystemCall)
|
|
SYSCALL_ENTRY 0xc00
|
|
/* Trap_0D is commented out to get more space for system call exception */
|
|
|
|
/* EXCEPTION(0x0D00, Trap_0D, unknown_exception) */
|
|
EXCEPTION(0x0E00, Trap_0E, unknown_exception)
|
|
EXCEPTION(0x0F00, Trap_0F, unknown_exception)
|
|
|
|
/* 0x1000 - Programmable Interval Timer (PIT) Exception */
|
|
START_EXCEPTION(0x1000, DecrementerTrap)
|
|
b Decrementer
|
|
|
|
/* 0x1010 - Fixed Interval Timer (FIT) Exception */
|
|
START_EXCEPTION(0x1010, FITExceptionTrap)
|
|
b FITException
|
|
|
|
/* 0x1020 - Watchdog Timer (WDT) Exception */
|
|
START_EXCEPTION(0x1020, WDTExceptionTrap)
|
|
b WDTException
|
|
|
|
/* 0x1100 - Data TLB Miss Exception
|
|
* As the name implies, translation is not in the MMU, so search the
|
|
* page tables and fix it. The only purpose of this function is to
|
|
* load TLB entries from the page table if they exist.
|
|
*/
|
|
START_EXCEPTION(0x1100, DTLBMiss)
|
|
mtspr SPRN_SPRG_SCRATCH5, r10 /* Save some working registers */
|
|
mtspr SPRN_SPRG_SCRATCH6, r11
|
|
mtspr SPRN_SPRG_SCRATCH3, r12
|
|
mtspr SPRN_SPRG_SCRATCH4, r9
|
|
mfcr r12
|
|
mfspr r9, SPRN_PID
|
|
rlwimi r12, r9, 0, 0xff
|
|
mfspr r10, SPRN_DEAR /* Get faulting address */
|
|
|
|
/* If we are faulting a kernel address, we have to use the
|
|
* kernel page tables.
|
|
*/
|
|
lis r11, PAGE_OFFSET@h
|
|
cmplw r10, r11
|
|
blt+ 3f
|
|
lis r11, swapper_pg_dir@h
|
|
ori r11, r11, swapper_pg_dir@l
|
|
li r9, 0
|
|
mtspr SPRN_PID, r9 /* TLB will have 0 TID */
|
|
b 4f
|
|
|
|
/* Get the PGD for the current thread.
|
|
*/
|
|
3:
|
|
mfspr r11,SPRN_SPRG_THREAD
|
|
lwz r11,PGDIR(r11)
|
|
4:
|
|
tophys(r11, r11)
|
|
rlwimi r11, r10, 12, 20, 29 /* Create L1 (pgdir/pmd) address */
|
|
lwz r11, 0(r11) /* Get L1 entry */
|
|
andi. r9, r11, _PMD_PRESENT /* Check if it points to a PTE page */
|
|
beq 2f /* Bail if no table */
|
|
|
|
rlwimi r11, r10, 22, 20, 29 /* Compute PTE address */
|
|
lwz r11, 0(r11) /* Get Linux PTE */
|
|
li r9, _PAGE_PRESENT | _PAGE_ACCESSED
|
|
andc. r9, r9, r11 /* Check permission */
|
|
bne 5f
|
|
|
|
rlwinm r9, r11, 1, _PAGE_RW /* dirty => rw */
|
|
and r9, r9, r11 /* hwwrite = dirty & rw */
|
|
rlwimi r11, r9, 0, _PAGE_RW /* replace rw by hwwrite */
|
|
|
|
/* Create TLB tag. This is the faulting address plus a static
|
|
* set of bits. These are size, valid, E, U0.
|
|
*/
|
|
li r9, 0x00c0
|
|
rlwimi r10, r9, 0, 20, 31
|
|
|
|
b finish_tlb_load
|
|
|
|
2: /* Check for possible large-page pmd entry */
|
|
rlwinm. r9, r11, 2, 22, 24
|
|
beq 5f
|
|
|
|
/* Create TLB tag. This is the faulting address, plus a static
|
|
* set of bits (valid, E, U0) plus the size from the PMD.
|
|
*/
|
|
ori r9, r9, 0x40
|
|
rlwimi r10, r9, 0, 20, 31
|
|
|
|
b finish_tlb_load
|
|
|
|
5:
|
|
/* The bailout. Restore registers to pre-exception conditions
|
|
* and call the heavyweights to help us out.
|
|
*/
|
|
mtspr SPRN_PID, r12
|
|
mtcrf 0x80, r12
|
|
mfspr r9, SPRN_SPRG_SCRATCH4
|
|
mfspr r12, SPRN_SPRG_SCRATCH3
|
|
mfspr r11, SPRN_SPRG_SCRATCH6
|
|
mfspr r10, SPRN_SPRG_SCRATCH5
|
|
b DataStorage
|
|
|
|
/* 0x1200 - Instruction TLB Miss Exception
|
|
* Nearly the same as above, except we get our information from different
|
|
* registers and bailout to a different point.
|
|
*/
|
|
START_EXCEPTION(0x1200, ITLBMiss)
|
|
mtspr SPRN_SPRG_SCRATCH5, r10 /* Save some working registers */
|
|
mtspr SPRN_SPRG_SCRATCH6, r11
|
|
mtspr SPRN_SPRG_SCRATCH3, r12
|
|
mtspr SPRN_SPRG_SCRATCH4, r9
|
|
mfcr r12
|
|
mfspr r9, SPRN_PID
|
|
rlwimi r12, r9, 0, 0xff
|
|
mfspr r10, SPRN_SRR0 /* Get faulting address */
|
|
|
|
/* If we are faulting a kernel address, we have to use the
|
|
* kernel page tables.
|
|
*/
|
|
lis r11, PAGE_OFFSET@h
|
|
cmplw r10, r11
|
|
blt+ 3f
|
|
lis r11, swapper_pg_dir@h
|
|
ori r11, r11, swapper_pg_dir@l
|
|
li r9, 0
|
|
mtspr SPRN_PID, r9 /* TLB will have 0 TID */
|
|
b 4f
|
|
|
|
/* Get the PGD for the current thread.
|
|
*/
|
|
3:
|
|
mfspr r11,SPRN_SPRG_THREAD
|
|
lwz r11,PGDIR(r11)
|
|
4:
|
|
tophys(r11, r11)
|
|
rlwimi r11, r10, 12, 20, 29 /* Create L1 (pgdir/pmd) address */
|
|
lwz r11, 0(r11) /* Get L1 entry */
|
|
andi. r9, r11, _PMD_PRESENT /* Check if it points to a PTE page */
|
|
beq 2f /* Bail if no table */
|
|
|
|
rlwimi r11, r10, 22, 20, 29 /* Compute PTE address */
|
|
lwz r11, 0(r11) /* Get Linux PTE */
|
|
li r9, _PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_EXEC
|
|
andc. r9, r9, r11 /* Check permission */
|
|
bne 5f
|
|
|
|
rlwinm r9, r11, 1, _PAGE_RW /* dirty => rw */
|
|
and r9, r9, r11 /* hwwrite = dirty & rw */
|
|
rlwimi r11, r9, 0, _PAGE_RW /* replace rw by hwwrite */
|
|
|
|
/* Create TLB tag. This is the faulting address plus a static
|
|
* set of bits. These are size, valid, E, U0.
|
|
*/
|
|
li r9, 0x00c0
|
|
rlwimi r10, r9, 0, 20, 31
|
|
|
|
b finish_tlb_load
|
|
|
|
2: /* Check for possible large-page pmd entry */
|
|
rlwinm. r9, r11, 2, 22, 24
|
|
beq 5f
|
|
|
|
/* Create TLB tag. This is the faulting address, plus a static
|
|
* set of bits (valid, E, U0) plus the size from the PMD.
|
|
*/
|
|
ori r9, r9, 0x40
|
|
rlwimi r10, r9, 0, 20, 31
|
|
|
|
b finish_tlb_load
|
|
|
|
5:
|
|
/* The bailout. Restore registers to pre-exception conditions
|
|
* and call the heavyweights to help us out.
|
|
*/
|
|
mtspr SPRN_PID, r12
|
|
mtcrf 0x80, r12
|
|
mfspr r9, SPRN_SPRG_SCRATCH4
|
|
mfspr r12, SPRN_SPRG_SCRATCH3
|
|
mfspr r11, SPRN_SPRG_SCRATCH6
|
|
mfspr r10, SPRN_SPRG_SCRATCH5
|
|
b InstructionAccess
|
|
|
|
EXCEPTION(0x1300, Trap_13, unknown_exception)
|
|
EXCEPTION(0x1400, Trap_14, unknown_exception)
|
|
EXCEPTION(0x1500, Trap_15, unknown_exception)
|
|
EXCEPTION(0x1600, Trap_16, unknown_exception)
|
|
EXCEPTION(0x1700, Trap_17, unknown_exception)
|
|
EXCEPTION(0x1800, Trap_18, unknown_exception)
|
|
EXCEPTION(0x1900, Trap_19, unknown_exception)
|
|
EXCEPTION(0x1A00, Trap_1A, unknown_exception)
|
|
EXCEPTION(0x1B00, Trap_1B, unknown_exception)
|
|
EXCEPTION(0x1C00, Trap_1C, unknown_exception)
|
|
EXCEPTION(0x1D00, Trap_1D, unknown_exception)
|
|
EXCEPTION(0x1E00, Trap_1E, unknown_exception)
|
|
EXCEPTION(0x1F00, Trap_1F, unknown_exception)
|
|
|
|
/* Check for a single step debug exception while in an exception
|
|
* handler before state has been saved. This is to catch the case
|
|
* where an instruction that we are trying to single step causes
|
|
* an exception (eg ITLB/DTLB miss) and thus the first instruction of
|
|
* the exception handler generates a single step debug exception.
|
|
*
|
|
* If we get a debug trap on the first instruction of an exception handler,
|
|
* we reset the MSR_DE in the _exception handler's_ MSR (the debug trap is
|
|
* a critical exception, so we are using SPRN_CSRR1 to manipulate the MSR).
|
|
* The exception handler was handling a non-critical interrupt, so it will
|
|
* save (and later restore) the MSR via SPRN_SRR1, which will still have
|
|
* the MSR_DE bit set.
|
|
*/
|
|
/* 0x2000 - Debug Exception */
|
|
START_EXCEPTION(0x2000, DebugTrap)
|
|
CRITICAL_EXCEPTION_PROLOG 0x2000 DebugTrap
|
|
|
|
/*
|
|
* If this is a single step or branch-taken exception in an
|
|
* exception entry sequence, it was probably meant to apply to
|
|
* the code where the exception occurred (since exception entry
|
|
* doesn't turn off DE automatically). We simulate the effect
|
|
* of turning off DE on entry to an exception handler by turning
|
|
* off DE in the SRR3 value and clearing the debug status.
|
|
*/
|
|
mfspr r10,SPRN_DBSR /* check single-step/branch taken */
|
|
andis. r10,r10,DBSR_IC@h
|
|
beq+ 2f
|
|
|
|
andi. r10,r9,MSR_IR|MSR_PR /* check supervisor + MMU off */
|
|
beq 1f /* branch and fix it up */
|
|
|
|
mfspr r10,SPRN_SRR2 /* Faulting instruction address */
|
|
cmplwi r10,0x2100
|
|
bgt+ 2f /* address above exception vectors */
|
|
|
|
/* here it looks like we got an inappropriate debug exception. */
|
|
1: rlwinm r9,r9,0,~MSR_DE /* clear DE in the SRR3 value */
|
|
lis r10,DBSR_IC@h /* clear the IC event */
|
|
mtspr SPRN_DBSR,r10
|
|
/* restore state and get out */
|
|
lwz r10,_CCR(r11)
|
|
lwz r0,GPR0(r11)
|
|
lwz r1,GPR1(r11)
|
|
mtcrf 0x80,r10
|
|
mtspr SPRN_SRR2,r12
|
|
mtspr SPRN_SRR3,r9
|
|
lwz r9,GPR9(r11)
|
|
lwz r12,GPR12(r11)
|
|
lwz r10,crit_r10@l(0)
|
|
lwz r11,crit_r11@l(0)
|
|
rfci
|
|
b .
|
|
|
|
/* continue normal handling for a critical exception... */
|
|
2: mfspr r4,SPRN_DBSR
|
|
stw r4,_ESR(r11) /* DebugException takes DBSR in _ESR */
|
|
prepare_transfer_to_handler
|
|
bl DebugException
|
|
b ret_from_crit_exc
|
|
|
|
/* Programmable Interval Timer (PIT) Exception. (from 0x1000) */
|
|
__HEAD
|
|
Decrementer:
|
|
EXCEPTION_PROLOG 0x1000 Decrementer
|
|
lis r0,TSR_PIS@h
|
|
mtspr SPRN_TSR,r0 /* Clear the PIT exception */
|
|
prepare_transfer_to_handler
|
|
bl timer_interrupt
|
|
b interrupt_return
|
|
|
|
/* Fixed Interval Timer (FIT) Exception. (from 0x1010) */
|
|
__HEAD
|
|
FITException:
|
|
EXCEPTION_PROLOG 0x1010 FITException
|
|
prepare_transfer_to_handler
|
|
bl unknown_exception
|
|
b interrupt_return
|
|
|
|
/* Watchdog Timer (WDT) Exception. (from 0x1020) */
|
|
__HEAD
|
|
WDTException:
|
|
CRITICAL_EXCEPTION_PROLOG 0x1020 WDTException
|
|
prepare_transfer_to_handler
|
|
bl WatchdogException
|
|
b ret_from_crit_exc
|
|
|
|
/* Other PowerPC processors, namely those derived from the 6xx-series
|
|
* have vectors from 0x2100 through 0x2F00 defined, but marked as reserved.
|
|
* However, for the 4xx-series processors these are neither defined nor
|
|
* reserved.
|
|
*/
|
|
|
|
__HEAD
|
|
/* Damn, I came up one instruction too many to fit into the
|
|
* exception space :-). Both the instruction and data TLB
|
|
* miss get to this point to load the TLB.
|
|
* r10 - TLB_TAG value
|
|
* r11 - Linux PTE
|
|
* r9 - available to use
|
|
* PID - loaded with proper value when we get here
|
|
* Upon exit, we reload everything and RFI.
|
|
* Actually, it will fit now, but oh well.....a common place
|
|
* to load the TLB.
|
|
*/
|
|
tlb_4xx_index:
|
|
.long 0
|
|
finish_tlb_load:
|
|
/*
|
|
* Clear out the software-only bits in the PTE to generate the
|
|
* TLB_DATA value. These are the bottom 2 bits of the RPM, the
|
|
* top 3 bits of the zone field, and M.
|
|
*/
|
|
li r9, 0x0ce2
|
|
andc r11, r11, r9
|
|
|
|
/* load the next available TLB index. */
|
|
lwz r9, tlb_4xx_index@l(0)
|
|
addi r9, r9, 1
|
|
andi. r9, r9, PPC40X_TLB_SIZE - 1
|
|
stw r9, tlb_4xx_index@l(0)
|
|
|
|
tlbwe r11, r9, TLB_DATA /* Load TLB LO */
|
|
tlbwe r10, r9, TLB_TAG /* Load TLB HI */
|
|
|
|
/* Done...restore registers and get out of here.
|
|
*/
|
|
mtspr SPRN_PID, r12
|
|
mtcrf 0x80, r12
|
|
mfspr r9, SPRN_SPRG_SCRATCH4
|
|
mfspr r12, SPRN_SPRG_SCRATCH3
|
|
mfspr r11, SPRN_SPRG_SCRATCH6
|
|
mfspr r10, SPRN_SPRG_SCRATCH5
|
|
rfi /* Should sync shadow TLBs */
|
|
b . /* prevent prefetch past rfi */
|
|
|
|
/* This is where the main kernel code starts.
|
|
*/
|
|
start_here:
|
|
|
|
/* ptr to current */
|
|
lis r2,init_task@h
|
|
ori r2,r2,init_task@l
|
|
|
|
/* ptr to phys current thread */
|
|
tophys(r4,r2)
|
|
addi r4,r4,THREAD /* init task's THREAD */
|
|
mtspr SPRN_SPRG_THREAD,r4
|
|
|
|
/* stack */
|
|
lis r1,init_thread_union@ha
|
|
addi r1,r1,init_thread_union@l
|
|
li r0,0
|
|
stwu r0,THREAD_SIZE-STACK_FRAME_OVERHEAD(r1)
|
|
|
|
bl early_init /* We have to do this with MMU on */
|
|
|
|
/*
|
|
* Decide what sort of machine this is and initialize the MMU.
|
|
*/
|
|
#ifdef CONFIG_KASAN
|
|
bl kasan_early_init
|
|
#endif
|
|
li r3,0
|
|
mr r4,r31
|
|
bl machine_init
|
|
bl MMU_init
|
|
|
|
/* Go back to running unmapped so we can load up new values
|
|
* and change to using our exception vectors.
|
|
* On the 4xx, all we have to do is invalidate the TLB to clear
|
|
* the old 16M byte TLB mappings.
|
|
*/
|
|
lis r4,2f@h
|
|
ori r4,r4,2f@l
|
|
tophys(r4,r4)
|
|
lis r3,(MSR_KERNEL & ~(MSR_IR|MSR_DR))@h
|
|
ori r3,r3,(MSR_KERNEL & ~(MSR_IR|MSR_DR))@l
|
|
mtspr SPRN_SRR0,r4
|
|
mtspr SPRN_SRR1,r3
|
|
rfi
|
|
b . /* prevent prefetch past rfi */
|
|
|
|
/* Load up the kernel context */
|
|
2:
|
|
sync /* Flush to memory before changing TLB */
|
|
tlbia
|
|
isync /* Flush shadow TLBs */
|
|
|
|
/* set up the PTE pointers for the Abatron bdiGDB.
|
|
*/
|
|
lis r6, swapper_pg_dir@h
|
|
ori r6, r6, swapper_pg_dir@l
|
|
lis r5, abatron_pteptrs@h
|
|
ori r5, r5, abatron_pteptrs@l
|
|
stw r5, 0xf0(0) /* Must match your Abatron config file */
|
|
tophys(r5,r5)
|
|
stw r6, 0(r5)
|
|
|
|
/* Now turn on the MMU for real! */
|
|
lis r4,MSR_KERNEL@h
|
|
ori r4,r4,MSR_KERNEL@l
|
|
lis r3,start_kernel@h
|
|
ori r3,r3,start_kernel@l
|
|
mtspr SPRN_SRR0,r3
|
|
mtspr SPRN_SRR1,r4
|
|
rfi /* enable MMU and jump to start_kernel */
|
|
b . /* prevent prefetch past rfi */
|
|
|
|
/* Set up the initial MMU state so we can do the first level of
|
|
* kernel initialization. This maps the first 16 MBytes of memory 1:1
|
|
* virtual to physical and more importantly sets the cache mode.
|
|
*/
|
|
initial_mmu:
|
|
tlbia /* Invalidate all TLB entries */
|
|
isync
|
|
|
|
/* We should still be executing code at physical address 0x0000xxxx
|
|
* at this point. However, start_here is at virtual address
|
|
* 0xC000xxxx. So, set up a TLB mapping to cover this once
|
|
* translation is enabled.
|
|
*/
|
|
|
|
lis r3,KERNELBASE@h /* Load the kernel virtual address */
|
|
ori r3,r3,KERNELBASE@l
|
|
tophys(r4,r3) /* Load the kernel physical address */
|
|
|
|
iccci r0,r3 /* Invalidate the i-cache before use */
|
|
|
|
/* Load the kernel PID.
|
|
*/
|
|
li r0,0
|
|
mtspr SPRN_PID,r0
|
|
sync
|
|
|
|
/* Configure and load one entry into TLB slots 63 */
|
|
clrrwi r4,r4,10 /* Mask off the real page number */
|
|
ori r4,r4,(TLB_WR | TLB_EX) /* Set the write and execute bits */
|
|
|
|
clrrwi r3,r3,10 /* Mask off the effective page number */
|
|
ori r3,r3,(TLB_VALID | TLB_PAGESZ(PAGESZ_16M))
|
|
|
|
li r0,63 /* TLB slot 63 */
|
|
|
|
tlbwe r4,r0,TLB_DATA /* Load the data portion of the entry */
|
|
tlbwe r3,r0,TLB_TAG /* Load the tag portion of the entry */
|
|
|
|
isync
|
|
|
|
/* Establish the exception vector base
|
|
*/
|
|
lis r4,KERNELBASE@h /* EVPR only uses the high 16-bits */
|
|
tophys(r0,r4) /* Use the physical address */
|
|
mtspr SPRN_EVPR,r0
|
|
|
|
blr
|
|
|
|
_GLOBAL(abort)
|
|
mfspr r13,SPRN_DBCR0
|
|
oris r13,r13,DBCR0_RST_SYSTEM@h
|
|
mtspr SPRN_DBCR0,r13
|