linux/drivers/media/i2c/m5mols/m5mols_capture.c
Laurent Pinchart 39ad9bbe5c [media] m5mols: Replace missing header
The include/media/s5p_fimc.h header has been removed in commit
49b2f4c56f ("exynos4-is: Remove support
for non-dt platforms"). This broke compilation of the m5mols driver.

Include the include/media/exynos-fimc.h header instead, which contains
the S5P_FIMC_TX_END_NOTIFY definition required by the driver.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-25 17:00:01 -03:00

159 lines
4.2 KiB
C

/*
* The Capture code for Fujitsu M-5MOLS ISP
*
* Copyright (C) 2011 Samsung Electronics Co., Ltd.
* Author: HeungJun Kim <riverful.kim@samsung.com>
*
* Copyright (C) 2009 Samsung Electronics Co., Ltd.
* Author: Dongsoo Nathaniel Kim <dongsoo45.kim@samsung.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#include <linux/i2c.h>
#include <linux/slab.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/gpio.h>
#include <linux/regulator/consumer.h>
#include <linux/videodev2.h>
#include <media/v4l2-ctrls.h>
#include <media/v4l2-device.h>
#include <media/v4l2-subdev.h>
#include <media/m5mols.h>
#include <media/exynos-fimc.h>
#include "m5mols.h"
#include "m5mols_reg.h"
/**
* m5mols_read_rational - I2C read of a rational number
*
* Read numerator and denominator from registers @addr_num and @addr_den
* respectively and return the division result in @val.
*/
static int m5mols_read_rational(struct v4l2_subdev *sd, u32 addr_num,
u32 addr_den, u32 *val)
{
u32 num, den;
int ret = m5mols_read_u32(sd, addr_num, &num);
if (!ret)
ret = m5mols_read_u32(sd, addr_den, &den);
if (ret)
return ret;
*val = den == 0 ? 0 : num / den;
return ret;
}
/**
* m5mols_capture_info - Gather captured image information
*
* For now it gathers only EXIF information and file size.
*/
static int m5mols_capture_info(struct m5mols_info *info)
{
struct m5mols_exif *exif = &info->cap.exif;
struct v4l2_subdev *sd = &info->sd;
int ret;
ret = m5mols_read_rational(sd, EXIF_INFO_EXPTIME_NU,
EXIF_INFO_EXPTIME_DE, &exif->exposure_time);
if (ret)
return ret;
ret = m5mols_read_rational(sd, EXIF_INFO_TV_NU, EXIF_INFO_TV_DE,
&exif->shutter_speed);
if (ret)
return ret;
ret = m5mols_read_rational(sd, EXIF_INFO_AV_NU, EXIF_INFO_AV_DE,
&exif->aperture);
if (ret)
return ret;
ret = m5mols_read_rational(sd, EXIF_INFO_BV_NU, EXIF_INFO_BV_DE,
&exif->brightness);
if (ret)
return ret;
ret = m5mols_read_rational(sd, EXIF_INFO_EBV_NU, EXIF_INFO_EBV_DE,
&exif->exposure_bias);
if (ret)
return ret;
ret = m5mols_read_u16(sd, EXIF_INFO_ISO, &exif->iso_speed);
if (!ret)
ret = m5mols_read_u16(sd, EXIF_INFO_FLASH, &exif->flash);
if (!ret)
ret = m5mols_read_u16(sd, EXIF_INFO_SDR, &exif->sdr);
if (!ret)
ret = m5mols_read_u16(sd, EXIF_INFO_QVAL, &exif->qval);
if (ret)
return ret;
if (!ret)
ret = m5mols_read_u32(sd, CAPC_IMAGE_SIZE, &info->cap.main);
if (!ret)
ret = m5mols_read_u32(sd, CAPC_THUMB_SIZE, &info->cap.thumb);
if (!ret)
info->cap.total = info->cap.main + info->cap.thumb;
return ret;
}
int m5mols_start_capture(struct m5mols_info *info)
{
unsigned int framesize = info->cap.buf_size - M5MOLS_JPEG_TAGS_SIZE;
struct v4l2_subdev *sd = &info->sd;
int ret;
/*
* Synchronize the controls, set the capture frame resolution and color
* format. The frame capture is initiated during switching from Monitor
* to Capture mode.
*/
ret = m5mols_set_mode(info, REG_MONITOR);
if (!ret)
ret = m5mols_restore_controls(info);
if (!ret)
ret = m5mols_write(sd, CAPP_YUVOUT_MAIN, REG_JPEG);
if (!ret)
ret = m5mols_write(sd, CAPP_MAIN_IMAGE_SIZE, info->resolution);
if (!ret)
ret = m5mols_write(sd, CAPP_JPEG_SIZE_MAX, framesize);
if (!ret)
ret = m5mols_set_mode(info, REG_CAPTURE);
if (!ret)
/* Wait until a frame is captured to ISP internal memory */
ret = m5mols_wait_interrupt(sd, REG_INT_CAPTURE, 2000);
if (ret)
return ret;
/*
* Initiate the captured data transfer to a MIPI-CSI receiver.
*/
ret = m5mols_write(sd, CAPC_SEL_FRAME, 1);
if (!ret)
ret = m5mols_write(sd, CAPC_START, REG_CAP_START_MAIN);
if (!ret) {
bool captured = false;
unsigned int size;
/* Wait for the capture completion interrupt */
ret = m5mols_wait_interrupt(sd, REG_INT_CAPTURE, 2000);
if (!ret) {
captured = true;
ret = m5mols_capture_info(info);
}
size = captured ? info->cap.main : 0;
v4l2_dbg(1, m5mols_debug, sd, "%s: size: %d, thumb.: %d B\n",
__func__, size, info->cap.thumb);
v4l2_subdev_notify(sd, S5P_FIMC_TX_END_NOTIFY, &size);
}
return ret;
}