mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-15 15:04:27 +08:00
25642705b2
Architecturally we should apply a 0x400 offset for these. Not doing
it will break future HW implementations.
The offset of 0 is supposed to remain for "triggers" though not all
sources support both trigger and store EOI, and in P9 specifically,
some sources will treat 0 as a store EOI. But future chips will not.
So this makes us use the properly architected offset which should work
always.
Fixes: 243e25112d
("powerpc/xive: Native exploitation of the XIVE interrupt controller")
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
504 lines
12 KiB
C
504 lines
12 KiB
C
/*
|
|
* Copyright 2017 Benjamin Herrenschmidt, IBM Corporation
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License, version 2, as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
/* File to be included by other .c files */
|
|
|
|
#define XGLUE(a,b) a##b
|
|
#define GLUE(a,b) XGLUE(a,b)
|
|
|
|
static void GLUE(X_PFX,ack_pending)(struct kvmppc_xive_vcpu *xc)
|
|
{
|
|
u8 cppr;
|
|
u16 ack;
|
|
|
|
/* XXX DD1 bug workaround: Check PIPR vs. CPPR first ! */
|
|
|
|
/* Perform the acknowledge OS to register cycle. */
|
|
ack = be16_to_cpu(__x_readw(__x_tima + TM_SPC_ACK_OS_REG));
|
|
|
|
/* Synchronize subsequent queue accesses */
|
|
mb();
|
|
|
|
/* XXX Check grouping level */
|
|
|
|
/* Anything ? */
|
|
if (!((ack >> 8) & TM_QW1_NSR_EO))
|
|
return;
|
|
|
|
/* Grab CPPR of the most favored pending interrupt */
|
|
cppr = ack & 0xff;
|
|
if (cppr < 8)
|
|
xc->pending |= 1 << cppr;
|
|
|
|
#ifdef XIVE_RUNTIME_CHECKS
|
|
/* Check consistency */
|
|
if (cppr >= xc->hw_cppr)
|
|
pr_warn("KVM-XIVE: CPU %d odd ack CPPR, got %d at %d\n",
|
|
smp_processor_id(), cppr, xc->hw_cppr);
|
|
#endif
|
|
|
|
/*
|
|
* Update our image of the HW CPPR. We don't yet modify
|
|
* xc->cppr, this will be done as we scan for interrupts
|
|
* in the queues.
|
|
*/
|
|
xc->hw_cppr = cppr;
|
|
}
|
|
|
|
static u8 GLUE(X_PFX,esb_load)(struct xive_irq_data *xd, u32 offset)
|
|
{
|
|
u64 val;
|
|
|
|
if (xd->flags & XIVE_IRQ_FLAG_SHIFT_BUG)
|
|
offset |= offset << 4;
|
|
|
|
val =__x_readq(__x_eoi_page(xd) + offset);
|
|
#ifdef __LITTLE_ENDIAN__
|
|
val >>= 64-8;
|
|
#endif
|
|
return (u8)val;
|
|
}
|
|
|
|
|
|
static void GLUE(X_PFX,source_eoi)(u32 hw_irq, struct xive_irq_data *xd)
|
|
{
|
|
/* If the XIVE supports the new "store EOI facility, use it */
|
|
if (xd->flags & XIVE_IRQ_FLAG_STORE_EOI)
|
|
__x_writeq(0, __x_eoi_page(xd) + XIVE_ESB_STORE_EOI);
|
|
else if (hw_irq && xd->flags & XIVE_IRQ_FLAG_EOI_FW) {
|
|
opal_int_eoi(hw_irq);
|
|
} else {
|
|
uint64_t eoi_val;
|
|
|
|
/*
|
|
* Otherwise for EOI, we use the special MMIO that does
|
|
* a clear of both P and Q and returns the old Q,
|
|
* except for LSIs where we use the "EOI cycle" special
|
|
* load.
|
|
*
|
|
* This allows us to then do a re-trigger if Q was set
|
|
* rather than synthetizing an interrupt in software
|
|
*
|
|
* For LSIs, using the HW EOI cycle works around a problem
|
|
* on P9 DD1 PHBs where the other ESB accesses don't work
|
|
* properly.
|
|
*/
|
|
if (xd->flags & XIVE_IRQ_FLAG_LSI)
|
|
__x_readq(__x_eoi_page(xd) + XIVE_ESB_LOAD_EOI);
|
|
else {
|
|
eoi_val = GLUE(X_PFX,esb_load)(xd, XIVE_ESB_SET_PQ_00);
|
|
|
|
/* Re-trigger if needed */
|
|
if ((eoi_val & 1) && __x_trig_page(xd))
|
|
__x_writeq(0, __x_trig_page(xd));
|
|
}
|
|
}
|
|
}
|
|
|
|
enum {
|
|
scan_fetch,
|
|
scan_poll,
|
|
scan_eoi,
|
|
};
|
|
|
|
static u32 GLUE(X_PFX,scan_interrupts)(struct kvmppc_xive_vcpu *xc,
|
|
u8 pending, int scan_type)
|
|
{
|
|
u32 hirq = 0;
|
|
u8 prio = 0xff;
|
|
|
|
/* Find highest pending priority */
|
|
while ((xc->mfrr != 0xff || pending != 0) && hirq == 0) {
|
|
struct xive_q *q;
|
|
u32 idx, toggle;
|
|
__be32 *qpage;
|
|
|
|
/*
|
|
* If pending is 0 this will return 0xff which is what
|
|
* we want
|
|
*/
|
|
prio = ffs(pending) - 1;
|
|
|
|
/*
|
|
* If the most favoured prio we found pending is less
|
|
* favored (or equal) than a pending IPI, we return
|
|
* the IPI instead.
|
|
*
|
|
* Note: If pending was 0 and mfrr is 0xff, we will
|
|
* not spurriously take an IPI because mfrr cannot
|
|
* then be smaller than cppr.
|
|
*/
|
|
if (prio >= xc->mfrr && xc->mfrr < xc->cppr) {
|
|
prio = xc->mfrr;
|
|
hirq = XICS_IPI;
|
|
break;
|
|
}
|
|
|
|
/* Don't scan past the guest cppr */
|
|
if (prio >= xc->cppr || prio > 7)
|
|
break;
|
|
|
|
/* Grab queue and pointers */
|
|
q = &xc->queues[prio];
|
|
idx = q->idx;
|
|
toggle = q->toggle;
|
|
|
|
/*
|
|
* Snapshot the queue page. The test further down for EOI
|
|
* must use the same "copy" that was used by __xive_read_eq
|
|
* since qpage can be set concurrently and we don't want
|
|
* to miss an EOI.
|
|
*/
|
|
qpage = READ_ONCE(q->qpage);
|
|
|
|
skip_ipi:
|
|
/*
|
|
* Try to fetch from the queue. Will return 0 for a
|
|
* non-queueing priority (ie, qpage = 0).
|
|
*/
|
|
hirq = __xive_read_eq(qpage, q->msk, &idx, &toggle);
|
|
|
|
/*
|
|
* If this was a signal for an MFFR change done by
|
|
* H_IPI we skip it. Additionally, if we were fetching
|
|
* we EOI it now, thus re-enabling reception of a new
|
|
* such signal.
|
|
*
|
|
* We also need to do that if prio is 0 and we had no
|
|
* page for the queue. In this case, we have non-queued
|
|
* IPI that needs to be EOId.
|
|
*
|
|
* This is safe because if we have another pending MFRR
|
|
* change that wasn't observed above, the Q bit will have
|
|
* been set and another occurrence of the IPI will trigger.
|
|
*/
|
|
if (hirq == XICS_IPI || (prio == 0 && !qpage)) {
|
|
if (scan_type == scan_fetch)
|
|
GLUE(X_PFX,source_eoi)(xc->vp_ipi,
|
|
&xc->vp_ipi_data);
|
|
/* Loop back on same queue with updated idx/toggle */
|
|
#ifdef XIVE_RUNTIME_CHECKS
|
|
WARN_ON(hirq && hirq != XICS_IPI);
|
|
#endif
|
|
if (hirq)
|
|
goto skip_ipi;
|
|
}
|
|
|
|
/* If fetching, update queue pointers */
|
|
if (scan_type == scan_fetch) {
|
|
q->idx = idx;
|
|
q->toggle = toggle;
|
|
}
|
|
|
|
/* Something found, stop searching */
|
|
if (hirq)
|
|
break;
|
|
|
|
/* Clear the pending bit on the now empty queue */
|
|
pending &= ~(1 << prio);
|
|
|
|
/*
|
|
* Check if the queue count needs adjusting due to
|
|
* interrupts being moved away.
|
|
*/
|
|
if (atomic_read(&q->pending_count)) {
|
|
int p = atomic_xchg(&q->pending_count, 0);
|
|
if (p) {
|
|
#ifdef XIVE_RUNTIME_CHECKS
|
|
WARN_ON(p > atomic_read(&q->count));
|
|
#endif
|
|
atomic_sub(p, &q->count);
|
|
}
|
|
}
|
|
}
|
|
|
|
/* If we are just taking a "peek", do nothing else */
|
|
if (scan_type == scan_poll)
|
|
return hirq;
|
|
|
|
/* Update the pending bits */
|
|
xc->pending = pending;
|
|
|
|
/*
|
|
* If this is an EOI that's it, no CPPR adjustment done here,
|
|
* all we needed was cleanup the stale pending bits and check
|
|
* if there's anything left.
|
|
*/
|
|
if (scan_type == scan_eoi)
|
|
return hirq;
|
|
|
|
/*
|
|
* If we found an interrupt, adjust what the guest CPPR should
|
|
* be as if we had just fetched that interrupt from HW.
|
|
*/
|
|
if (hirq)
|
|
xc->cppr = prio;
|
|
/*
|
|
* If it was an IPI the HW CPPR might have been lowered too much
|
|
* as the HW interrupt we use for IPIs is routed to priority 0.
|
|
*
|
|
* We re-sync it here.
|
|
*/
|
|
if (xc->cppr != xc->hw_cppr) {
|
|
xc->hw_cppr = xc->cppr;
|
|
__x_writeb(xc->cppr, __x_tima + TM_QW1_OS + TM_CPPR);
|
|
}
|
|
|
|
return hirq;
|
|
}
|
|
|
|
X_STATIC unsigned long GLUE(X_PFX,h_xirr)(struct kvm_vcpu *vcpu)
|
|
{
|
|
struct kvmppc_xive_vcpu *xc = vcpu->arch.xive_vcpu;
|
|
u8 old_cppr;
|
|
u32 hirq;
|
|
|
|
pr_devel("H_XIRR\n");
|
|
|
|
xc->GLUE(X_STAT_PFX,h_xirr)++;
|
|
|
|
/* First collect pending bits from HW */
|
|
GLUE(X_PFX,ack_pending)(xc);
|
|
|
|
/*
|
|
* Cleanup the old-style bits if needed (they may have been
|
|
* set by pull or an escalation interrupts).
|
|
*/
|
|
if (test_bit(BOOK3S_IRQPRIO_EXTERNAL, &vcpu->arch.pending_exceptions))
|
|
clear_bit(BOOK3S_IRQPRIO_EXTERNAL_LEVEL,
|
|
&vcpu->arch.pending_exceptions);
|
|
|
|
pr_devel(" new pending=0x%02x hw_cppr=%d cppr=%d\n",
|
|
xc->pending, xc->hw_cppr, xc->cppr);
|
|
|
|
/* Grab previous CPPR and reverse map it */
|
|
old_cppr = xive_prio_to_guest(xc->cppr);
|
|
|
|
/* Scan for actual interrupts */
|
|
hirq = GLUE(X_PFX,scan_interrupts)(xc, xc->pending, scan_fetch);
|
|
|
|
pr_devel(" got hirq=0x%x hw_cppr=%d cppr=%d\n",
|
|
hirq, xc->hw_cppr, xc->cppr);
|
|
|
|
#ifdef XIVE_RUNTIME_CHECKS
|
|
/* That should never hit */
|
|
if (hirq & 0xff000000)
|
|
pr_warn("XIVE: Weird guest interrupt number 0x%08x\n", hirq);
|
|
#endif
|
|
|
|
/*
|
|
* XXX We could check if the interrupt is masked here and
|
|
* filter it. If we chose to do so, we would need to do:
|
|
*
|
|
* if (masked) {
|
|
* lock();
|
|
* if (masked) {
|
|
* old_Q = true;
|
|
* hirq = 0;
|
|
* }
|
|
* unlock();
|
|
* }
|
|
*/
|
|
|
|
/* Return interrupt and old CPPR in GPR4 */
|
|
vcpu->arch.gpr[4] = hirq | (old_cppr << 24);
|
|
|
|
return H_SUCCESS;
|
|
}
|
|
|
|
X_STATIC unsigned long GLUE(X_PFX,h_ipoll)(struct kvm_vcpu *vcpu, unsigned long server)
|
|
{
|
|
struct kvmppc_xive_vcpu *xc = vcpu->arch.xive_vcpu;
|
|
u8 pending = xc->pending;
|
|
u32 hirq;
|
|
u8 pipr;
|
|
|
|
pr_devel("H_IPOLL(server=%ld)\n", server);
|
|
|
|
xc->GLUE(X_STAT_PFX,h_ipoll)++;
|
|
|
|
/* Grab the target VCPU if not the current one */
|
|
if (xc->server_num != server) {
|
|
vcpu = kvmppc_xive_find_server(vcpu->kvm, server);
|
|
if (!vcpu)
|
|
return H_PARAMETER;
|
|
xc = vcpu->arch.xive_vcpu;
|
|
|
|
/* Scan all priorities */
|
|
pending = 0xff;
|
|
} else {
|
|
/* Grab pending interrupt if any */
|
|
pipr = __x_readb(__x_tima + TM_QW1_OS + TM_PIPR);
|
|
if (pipr < 8)
|
|
pending |= 1 << pipr;
|
|
}
|
|
|
|
hirq = GLUE(X_PFX,scan_interrupts)(xc, pending, scan_poll);
|
|
|
|
/* Return interrupt and old CPPR in GPR4 */
|
|
vcpu->arch.gpr[4] = hirq | (xc->cppr << 24);
|
|
|
|
return H_SUCCESS;
|
|
}
|
|
|
|
static void GLUE(X_PFX,push_pending_to_hw)(struct kvmppc_xive_vcpu *xc)
|
|
{
|
|
u8 pending, prio;
|
|
|
|
pending = xc->pending;
|
|
if (xc->mfrr != 0xff) {
|
|
if (xc->mfrr < 8)
|
|
pending |= 1 << xc->mfrr;
|
|
else
|
|
pending |= 0x80;
|
|
}
|
|
if (!pending)
|
|
return;
|
|
prio = ffs(pending) - 1;
|
|
|
|
__x_writeb(prio, __x_tima + TM_SPC_SET_OS_PENDING);
|
|
}
|
|
|
|
X_STATIC int GLUE(X_PFX,h_cppr)(struct kvm_vcpu *vcpu, unsigned long cppr)
|
|
{
|
|
struct kvmppc_xive_vcpu *xc = vcpu->arch.xive_vcpu;
|
|
u8 old_cppr;
|
|
|
|
pr_devel("H_CPPR(cppr=%ld)\n", cppr);
|
|
|
|
xc->GLUE(X_STAT_PFX,h_cppr)++;
|
|
|
|
/* Map CPPR */
|
|
cppr = xive_prio_from_guest(cppr);
|
|
|
|
/* Remember old and update SW state */
|
|
old_cppr = xc->cppr;
|
|
xc->cppr = cppr;
|
|
|
|
/*
|
|
* We are masking less, we need to look for pending things
|
|
* to deliver and set VP pending bits accordingly to trigger
|
|
* a new interrupt otherwise we might miss MFRR changes for
|
|
* which we have optimized out sending an IPI signal.
|
|
*/
|
|
if (cppr > old_cppr)
|
|
GLUE(X_PFX,push_pending_to_hw)(xc);
|
|
|
|
/* Apply new CPPR */
|
|
xc->hw_cppr = cppr;
|
|
__x_writeb(cppr, __x_tima + TM_QW1_OS + TM_CPPR);
|
|
|
|
return H_SUCCESS;
|
|
}
|
|
|
|
X_STATIC int GLUE(X_PFX,h_eoi)(struct kvm_vcpu *vcpu, unsigned long xirr)
|
|
{
|
|
struct kvmppc_xive *xive = vcpu->kvm->arch.xive;
|
|
struct kvmppc_xive_src_block *sb;
|
|
struct kvmppc_xive_irq_state *state;
|
|
struct kvmppc_xive_vcpu *xc = vcpu->arch.xive_vcpu;
|
|
struct xive_irq_data *xd;
|
|
u8 new_cppr = xirr >> 24;
|
|
u32 irq = xirr & 0x00ffffff, hw_num;
|
|
u16 src;
|
|
int rc = 0;
|
|
|
|
pr_devel("H_EOI(xirr=%08lx)\n", xirr);
|
|
|
|
xc->GLUE(X_STAT_PFX,h_eoi)++;
|
|
|
|
xc->cppr = xive_prio_from_guest(new_cppr);
|
|
|
|
/*
|
|
* IPIs are synthetized from MFRR and thus don't need
|
|
* any special EOI handling. The underlying interrupt
|
|
* used to signal MFRR changes is EOId when fetched from
|
|
* the queue.
|
|
*/
|
|
if (irq == XICS_IPI || irq == 0)
|
|
goto bail;
|
|
|
|
/* Find interrupt source */
|
|
sb = kvmppc_xive_find_source(xive, irq, &src);
|
|
if (!sb) {
|
|
pr_devel(" source not found !\n");
|
|
rc = H_PARAMETER;
|
|
goto bail;
|
|
}
|
|
state = &sb->irq_state[src];
|
|
kvmppc_xive_select_irq(state, &hw_num, &xd);
|
|
|
|
state->in_eoi = true;
|
|
mb();
|
|
|
|
again:
|
|
if (state->guest_priority == MASKED) {
|
|
arch_spin_lock(&sb->lock);
|
|
if (state->guest_priority != MASKED) {
|
|
arch_spin_unlock(&sb->lock);
|
|
goto again;
|
|
}
|
|
pr_devel(" EOI on saved P...\n");
|
|
|
|
/* Clear old_p, that will cause unmask to perform an EOI */
|
|
state->old_p = false;
|
|
|
|
arch_spin_unlock(&sb->lock);
|
|
} else {
|
|
pr_devel(" EOI on source...\n");
|
|
|
|
/* Perform EOI on the source */
|
|
GLUE(X_PFX,source_eoi)(hw_num, xd);
|
|
|
|
/* If it's an emulated LSI, check level and resend */
|
|
if (state->lsi && state->asserted)
|
|
__x_writeq(0, __x_trig_page(xd));
|
|
|
|
}
|
|
|
|
mb();
|
|
state->in_eoi = false;
|
|
bail:
|
|
|
|
/* Re-evaluate pending IRQs and update HW */
|
|
GLUE(X_PFX,scan_interrupts)(xc, xc->pending, scan_eoi);
|
|
GLUE(X_PFX,push_pending_to_hw)(xc);
|
|
pr_devel(" after scan pending=%02x\n", xc->pending);
|
|
|
|
/* Apply new CPPR */
|
|
xc->hw_cppr = xc->cppr;
|
|
__x_writeb(xc->cppr, __x_tima + TM_QW1_OS + TM_CPPR);
|
|
|
|
return rc;
|
|
}
|
|
|
|
X_STATIC int GLUE(X_PFX,h_ipi)(struct kvm_vcpu *vcpu, unsigned long server,
|
|
unsigned long mfrr)
|
|
{
|
|
struct kvmppc_xive_vcpu *xc = vcpu->arch.xive_vcpu;
|
|
|
|
pr_devel("H_IPI(server=%08lx,mfrr=%ld)\n", server, mfrr);
|
|
|
|
xc->GLUE(X_STAT_PFX,h_ipi)++;
|
|
|
|
/* Find target */
|
|
vcpu = kvmppc_xive_find_server(vcpu->kvm, server);
|
|
if (!vcpu)
|
|
return H_PARAMETER;
|
|
xc = vcpu->arch.xive_vcpu;
|
|
|
|
/* Locklessly write over MFRR */
|
|
xc->mfrr = mfrr;
|
|
|
|
/* Shoot the IPI if most favored than target cppr */
|
|
if (mfrr < xc->cppr)
|
|
__x_writeq(0, __x_trig_page(&xc->vp_ipi_data));
|
|
|
|
return H_SUCCESS;
|
|
}
|