linux/drivers/input
Marek Vasut c6ac8f0b4c Input: ili210x - add ili251x firmware update support
The ili251x firmware can be updated, this is used when switching between
different modes of operation of the touch surface, e.g. glove operation.
This patch implements the firmware update mechanism triggered by a write
into an sysfs attribute.

The firmware itself is distributed as an intel hex file with non-standard
types. The first two lines are of type 0xad, which indicates the start of
DataFlash payload, that is always at address 0xf000 on the ili251x, so it
can be dropped, and 0xac which indicates the position of firmware info in
the Application payload, that is always at address 0x2020 on the ili251x
and we do not care. The rest of the firmware is data of type 0x00, and we
care about that. To convert the firmware hex file into something usable
by the kernel, remove the first two lines and then use ihex2fw:

 $ tail -n +3 input.hex > temp.hex
 $ ./tools/firmware/ihex2fw temp.hex firmware/ilitek/ili251x.bin

To trigger the firmware update, place firmware file ilitek/ili251x.bin
into /lib/firmware/, write into firmware_update sysfs attribute and wait
about 30-40 seconds. The firmware update is slow. Afterward, verify the
firmware_version and mode sysfs attributes to check whether the firmware
got updated and the controller switched back to application (AP) mode by
reading out 'mode' attribute in sysfs.

Note that the content of firmware_version, e.g. 0600.0005.abcd.aa04 can
be matched to the content of the firmware hex file. The first four bytes,
0x06 0x00 0x00 0x05 can be found at ^:102030 00 05000006, the next four
bytes 0xab 0xcd 0xaa 0x04 at ^:10F000 00 nnnnnnnn ABCDAA04.

Note that the protocol differs considerably between the ili2xxx devices,
this patch therefore implements this functionality only for ili251x that
I can test.

Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20210831202506.181927-3-marex@denx.de
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-10-16 22:29:35 -07:00
..
gameport treewide: replace '---help---' in Kconfig files with 'help' 2020-06-14 01:57:21 +09:00
joystick Input: analog - fix invalid snprintf() call 2021-10-05 13:28:41 -07:00
keyboard Input: tm2-touchkey - allow changing keycodes from userspace 2021-10-15 20:26:30 -07:00
misc Input: pm8941-pwrkey - respect reboot_mode for warm reset 2021-10-16 21:31:07 -07:00
mouse Linux 5.13 2021-07-18 18:56:58 -07:00
rmi4 Input: synaptics-rmi4 - use new structure for SPI transfer delays 2020-12-10 23:39:16 -08:00
serio Revert "Input: serio - make write method mandatory" 2021-07-20 21:48:35 -07:00
tablet Input: aiptek - convert sysfs sprintf/snprintf family to sysfs_emit 2021-02-22 21:22:50 -08:00
touchscreen Input: ili210x - add ili251x firmware update support 2021-10-16 22:29:35 -07:00
apm-power.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 2019-06-19 17:09:55 +02:00
evbug.c Input: evbug - remove an empty comment block 2021-05-24 21:06:39 -07:00
evdev.c Input: evdev - per-client waitgroups 2020-10-06 18:34:15 -07:00
ff-core.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 156 2019-05-30 11:26:35 -07:00
ff-memless.c Input: ff-memless - kill timer in destroy() 2019-11-15 11:45:03 -08:00
input-compat.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 2019-06-19 17:09:55 +02:00
input-compat.h treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 2019-06-19 17:09:55 +02:00
input-leds.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 2019-06-19 17:09:55 +02:00
input-mt.c Input: MT - avoid comma separated statements 2020-08-25 10:26:05 -07:00
input-poller.c Input: use input_device_enabled() 2020-12-02 22:10:33 -08:00
input-poller.h Input: add support for polling to input devices 2019-08-20 12:04:07 -07:00
input.c Input: Add "inhibited" property 2020-12-02 22:10:35 -08:00
joydev.c Input: joydev - prevent use of not validated data in JSIOCSBTNMAP ioctl 2021-07-04 23:02:10 -07:00
Kconfig Input: remove input_polled_dev implementation 2020-12-02 12:35:14 -08:00
Makefile Input: touchscreen - move helper functions to core 2021-03-25 11:14:09 -07:00
matrix-keymap.c Input: matrix-keymap - switch to use device_property_count_u32() 2019-08-12 00:03:13 -07:00
mousedev.c *: convert stream-like files -> stream_open, even if they use noop_llseek 2019-07-14 16:09:19 +03:00
sparse-keymap.c Input: Use fallthrough pseudo-keyword 2020-07-07 11:25:54 -07:00
touchscreen.c Input: touchscreen - broaden use-cases described in comments 2021-03-25 11:14:09 -07:00