korg/linux
0
0
Fork 0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-12-12 13:34:10 +08:00
Code Issues Packages Projects Releases Wiki Activity
c69bb91c47
linux/drivers/hwmon/spd5118.c
Guenter Roeck 1226a1b2e5 hwmon: (spd5118) Add support for Renesas/ITD SPD5118 hub controllers 
The SPD5118 specification says, in its documentation of the page bits
in the MR11 register:

"
This register only applies to non-volatile memory (1024) Bytes) access of
SPD5 Hub device.
For volatile memory access, this register must be programmed to '000'.
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
"

Renesas/ITD SPD5118 hub controllers take this literally and disable access
to volatile memory if the page selected in MR11 is != 0. Since the BIOS or
ROMMON will access the non-volatile memory and likely select a page != 0,
this means that the driver will not instantiate since it can not identify
the chip. Even if the driver instantiates, access to volatile registers
is blocked after a nvram read operation which selects a page other than 0.

To solve the problem, add initialization code to select page 0 during
probe. Before doing that, use basic validation to ensure that this is
really a SPD5118 device and not some random EEPROM.

Cc: Sasha Kozachuk <skozachuk@google.com>
Cc: John Hamrick <johnham@google.com>
Cc: Chris Sarra <chrissarra@google.com>
Tested-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2024-06-18 20:07:42 -07:00

704 lines
17 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Driver for Jedec 5118 compliant temperature sensors
*
* Derived from https://github.com/Steve-Tech/SPD5118-DKMS
* Originally from T/2 driver at https://t2sde.org/packages/linux
* Copyright (c) 2023 René Rebe, ExactCODE GmbH; Germany.
*
* Copyright (c) 2024 Guenter Roeck
*
* Inspired by ee1004.c and jc42.c.
*
* SPD5118 compliant temperature sensors are typically used on DDR5
* memory modules.
*/
#include <linux/bitops.h>
#include <linux/bits.h>
#include <linux/err.h>
#include <linux/i2c.h>
#include <linux/hwmon.h>
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/nvmem-provider.h>
#include <linux/pm.h>
#include <linux/regmap.h>
#include <linux/units.h>
/* Addresses to scan */
static const unsigned short normal_i2c[] = {
0x50, 0x51, 0x52, 0x53, 0x54, 0x55, 0x56, 0x57, I2C_CLIENT_END };
/* SPD5118 registers. */
#define SPD5118_REG_TYPE 0x00 /* MR0:MR1 */
#define SPD5118_REG_REVISION 0x02 /* MR2 */
#define SPD5118_REG_VENDOR 0x03 /* MR3:MR4 */
#define SPD5118_REG_CAPABILITY 0x05 /* MR5 */
#define SPD5118_REG_I2C_LEGACY_MODE 0x0B /* MR11 */
#define SPD5118_REG_TEMP_CLR 0x13 /* MR19 */
#define SPD5118_REG_ERROR_CLR 0x14 /* MR20 */
#define SPD5118_REG_TEMP_CONFIG 0x1A /* MR26 */
#define SPD5118_REG_TEMP_MAX 0x1c /* MR28:MR29 */
#define SPD5118_REG_TEMP_MIN 0x1e /* MR30:MR31 */
#define SPD5118_REG_TEMP_CRIT 0x20 /* MR32:MR33 */
#define SPD5118_REG_TEMP_LCRIT 0x22 /* MR34:MR35 */
#define SPD5118_REG_TEMP 0x31 /* MR49:MR50 */
#define SPD5118_REG_TEMP_STATUS 0x33 /* MR51 */
#define SPD5118_TEMP_STATUS_HIGH BIT(0)
#define SPD5118_TEMP_STATUS_LOW BIT(1)
#define SPD5118_TEMP_STATUS_CRIT BIT(2)
#define SPD5118_TEMP_STATUS_LCRIT BIT(3)
#define SPD5118_CAP_TS_SUPPORT BIT(1) /* temperature sensor support */
#define SPD5118_TS_DISABLE BIT(0) /* temperature sensor disable */
#define SPD5118_LEGACY_MODE_ADDR BIT(3)
#define SPD5118_LEGACY_PAGE_MASK GENMASK(2, 0)
#define SPD5118_LEGACY_MODE_MASK (SPD5118_LEGACY_MODE_ADDR | SPD5118_LEGACY_PAGE_MASK)
#define SPD5118_NUM_PAGES 8
#define SPD5118_PAGE_SIZE 128
#define SPD5118_PAGE_SHIFT 7
#define SPD5118_PAGE_MASK GENMASK(6, 0)
#define SPD5118_EEPROM_BASE 0x80
#define SPD5118_EEPROM_SIZE (SPD5118_PAGE_SIZE * SPD5118_NUM_PAGES)
/* Temperature unit in millicelsius */
#define SPD5118_TEMP_UNIT (MILLIDEGREE_PER_DEGREE / 4)
/* Representable temperature range in millicelsius */
#define SPD5118_TEMP_RANGE_MIN -256000
#define SPD5118_TEMP_RANGE_MAX 255750
struct spd5118_data {
struct regmap *regmap;
struct mutex nvmem_lock;
};
/* hwmon */
static int spd5118_temp_from_reg(u16 reg)
{
int temp = sign_extend32(reg >> 2, 10);
return temp * SPD5118_TEMP_UNIT;
}
static u16 spd5118_temp_to_reg(long temp)
{
temp = clamp_val(temp, SPD5118_TEMP_RANGE_MIN, SPD5118_TEMP_RANGE_MAX);
return (DIV_ROUND_CLOSEST(temp, SPD5118_TEMP_UNIT) & 0x7ff) << 2;
}
static int spd5118_read_temp(struct regmap *regmap, u32 attr, long *val)
{
int reg, err;
u8 regval[2];
u16 temp;
switch (attr) {
case hwmon_temp_input:
reg = SPD5118_REG_TEMP;
break;
case hwmon_temp_max:
reg = SPD5118_REG_TEMP_MAX;
break;
case hwmon_temp_min:
reg = SPD5118_REG_TEMP_MIN;
break;
case hwmon_temp_crit:
reg = SPD5118_REG_TEMP_CRIT;
break;
case hwmon_temp_lcrit:
reg = SPD5118_REG_TEMP_LCRIT;
break;
default:
return -EOPNOTSUPP;
}
err = regmap_bulk_read(regmap, reg, regval, 2);
if (err)
return err;
temp = (regval[1] << 8) | regval[0];
*val = spd5118_temp_from_reg(temp);
return 0;
}
static int spd5118_read_alarm(struct regmap *regmap, u32 attr, long *val)
{
unsigned int mask, regval;
int err;
switch (attr) {
case hwmon_temp_max_alarm:
mask = SPD5118_TEMP_STATUS_HIGH;
break;
case hwmon_temp_min_alarm:
mask = SPD5118_TEMP_STATUS_LOW;
break;
case hwmon_temp_crit_alarm:
mask = SPD5118_TEMP_STATUS_CRIT;
break;
case hwmon_temp_lcrit_alarm:
mask = SPD5118_TEMP_STATUS_LCRIT;
break;
default:
return -EOPNOTSUPP;
}
err = regmap_read(regmap, SPD5118_REG_TEMP_STATUS, &regval);
if (err < 0)
return err;
*val = !!(regval & mask);
if (*val)
return regmap_write(regmap, SPD5118_REG_TEMP_CLR, mask);
return 0;
}
static int spd5118_read_enable(struct regmap *regmap, long *val)
{
u32 regval;
int err;
err = regmap_read(regmap, SPD5118_REG_TEMP_CONFIG, &regval);
if (err < 0)
return err;
*val = !(regval & SPD5118_TS_DISABLE);
return 0;
}
static int spd5118_read(struct device *dev, enum hwmon_sensor_types type,
u32 attr, int channel, long *val)
{
struct regmap *regmap = dev_get_drvdata(dev);
if (type != hwmon_temp)
return -EOPNOTSUPP;
switch (attr) {
case hwmon_temp_input:
case hwmon_temp_max:
case hwmon_temp_min:
case hwmon_temp_crit:
case hwmon_temp_lcrit:
return spd5118_read_temp(regmap, attr, val);
case hwmon_temp_max_alarm:
case hwmon_temp_min_alarm:
case hwmon_temp_crit_alarm:
case hwmon_temp_lcrit_alarm:
return spd5118_read_alarm(regmap, attr, val);
case hwmon_temp_enable:
return spd5118_read_enable(regmap, val);
default:
return -EOPNOTSUPP;
}
}
static int spd5118_write_temp(struct regmap *regmap, u32 attr, long val)
{
u8 regval[2];
u16 temp;
int reg;
switch (attr) {
case hwmon_temp_max:
reg = SPD5118_REG_TEMP_MAX;
break;
case hwmon_temp_min:
reg = SPD5118_REG_TEMP_MIN;
break;
case hwmon_temp_crit:
reg = SPD5118_REG_TEMP_CRIT;
break;
case hwmon_temp_lcrit:
reg = SPD5118_REG_TEMP_LCRIT;
break;
default:
return -EOPNOTSUPP;
}
temp = spd5118_temp_to_reg(val);
regval[0] = temp & 0xff;
regval[1] = temp >> 8;
return regmap_bulk_write(regmap, reg, regval, 2);
}
static int spd5118_write_enable(struct regmap *regmap, long val)
{
if (val && val != 1)
return -EINVAL;
return regmap_update_bits(regmap, SPD5118_REG_TEMP_CONFIG,
SPD5118_TS_DISABLE,
val ? 0 : SPD5118_TS_DISABLE);
}
static int spd5118_temp_write(struct regmap *regmap, u32 attr, long val)
{
switch (attr) {
case hwmon_temp_max:
case hwmon_temp_min:
case hwmon_temp_crit:
case hwmon_temp_lcrit:
return spd5118_write_temp(regmap, attr, val);
case hwmon_temp_enable:
return spd5118_write_enable(regmap, val);
default:
return -EOPNOTSUPP;
}
}
static int spd5118_write(struct device *dev, enum hwmon_sensor_types type,
u32 attr, int channel, long val)
{
struct regmap *regmap = dev_get_drvdata(dev);
switch (type) {
case hwmon_temp:
return spd5118_temp_write(regmap, attr, val);
default:
return -EOPNOTSUPP;
}
}
static umode_t spd5118_is_visible(const void *_data, enum hwmon_sensor_types type,
u32 attr, int channel)
{
if (type != hwmon_temp)
return 0;
switch (attr) {
case hwmon_temp_input:
return 0444;
case hwmon_temp_min:
case hwmon_temp_max:
case hwmon_temp_lcrit:
case hwmon_temp_crit:
case hwmon_temp_enable:
return 0644;
case hwmon_temp_min_alarm:
case hwmon_temp_max_alarm:
case hwmon_temp_crit_alarm:
case hwmon_temp_lcrit_alarm:
return 0444;
default:
return 0;
}
}
static inline bool spd5118_parity8(u8 w)
{
w ^= w >> 4;
return (0x6996 >> (w & 0xf)) & 1;
}
/*
* Bank and vendor id are 8-bit fields with seven data bits and odd parity.
* Vendor IDs 0 and 0x7f are invalid.
* See Jedec standard JEP106BJ for details and a list of assigned vendor IDs.
*/
static bool spd5118_vendor_valid(u8 bank, u8 id)
{
if (!spd5118_parity8(bank) || !spd5118_parity8(id))
return false;
id &= 0x7f;
return id && id != 0x7f;
}
/* Return 0 if detection is successful, -ENODEV otherwise */
static int spd5118_detect(struct i2c_client *client, struct i2c_board_info *info)
{
struct i2c_adapter *adapter = client->adapter;
int regval;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA |
I2C_FUNC_SMBUS_WORD_DATA))
return -ENODEV;
regval = i2c_smbus_read_word_swapped(client, SPD5118_REG_TYPE);
if (regval != 0x5118)
return -ENODEV;
regval = i2c_smbus_read_word_data(client, SPD5118_REG_VENDOR);
if (regval < 0 || !spd5118_vendor_valid(regval & 0xff, regval >> 8))
return -ENODEV;
regval = i2c_smbus_read_byte_data(client, SPD5118_REG_CAPABILITY);
if (regval < 0)
return -ENODEV;
if (!(regval & SPD5118_CAP_TS_SUPPORT) || (regval & 0xfc))
return -ENODEV;
regval = i2c_smbus_read_byte_data(client, SPD5118_REG_TEMP_CLR);
if (regval)
return -ENODEV;
regval = i2c_smbus_read_byte_data(client, SPD5118_REG_ERROR_CLR);
if (regval)
return -ENODEV;
regval = i2c_smbus_read_byte_data(client, SPD5118_REG_REVISION);
if (regval < 0 || (regval & 0xc1))
return -ENODEV;
regval = i2c_smbus_read_byte_data(client, SPD5118_REG_TEMP_CONFIG);
if (regval < 0)
return -ENODEV;
if (regval & ~SPD5118_TS_DISABLE)
return -ENODEV;
strscpy(info->type, "spd5118", I2C_NAME_SIZE);
return 0;
}
static const struct hwmon_channel_info *spd5118_info[] = {
HWMON_CHANNEL_INFO(chip,
HWMON_C_REGISTER_TZ),
HWMON_CHANNEL_INFO(temp,
HWMON_T_INPUT |
HWMON_T_LCRIT | HWMON_T_LCRIT_ALARM |
HWMON_T_MIN | HWMON_T_MIN_ALARM |
HWMON_T_MAX | HWMON_T_MAX_ALARM |
HWMON_T_CRIT | HWMON_T_CRIT_ALARM |
HWMON_T_ENABLE),
NULL
};
static const struct hwmon_ops spd5118_hwmon_ops = {
.is_visible = spd5118_is_visible,
.read = spd5118_read,
.write = spd5118_write,
};
static const struct hwmon_chip_info spd5118_chip_info = {
.ops = &spd5118_hwmon_ops,
.info = spd5118_info,
};
/* nvmem */
static ssize_t spd5118_nvmem_read_page(struct regmap *regmap, char *buf,
unsigned int offset, size_t count)
{
int addr = (offset >> SPD5118_PAGE_SHIFT) * 0x100 + SPD5118_EEPROM_BASE;
int err;
offset &= SPD5118_PAGE_MASK;
/* Can't cross page boundaries */
if (offset + count > SPD5118_PAGE_SIZE)
count = SPD5118_PAGE_SIZE - offset;
err = regmap_bulk_read(regmap, addr + offset, buf, count);
if (err)
return err;
return count;
}
static int spd5118_nvmem_read(void *priv, unsigned int off, void *val, size_t count)
{
struct spd5118_data *data = priv;
char *buf = val;
int ret;
if (unlikely(!count))
return count;
if (off + count > SPD5118_EEPROM_SIZE)
return -EINVAL;
mutex_lock(&data->nvmem_lock);
while (count) {
ret = spd5118_nvmem_read_page(data->regmap, buf, off, count);
if (ret < 0) {
mutex_unlock(&data->nvmem_lock);
return ret;
}
buf += ret;
off += ret;
count -= ret;
}
mutex_unlock(&data->nvmem_lock);
return 0;
}
static int spd5118_nvmem_init(struct device *dev, struct spd5118_data *data)
{
struct nvmem_config nvmem_config = {
.type = NVMEM_TYPE_EEPROM,
.name = dev_name(dev),
.id = NVMEM_DEVID_NONE,
.dev = dev,
.base_dev = dev,
.read_only = true,
.root_only = false,
.owner = THIS_MODULE,
.compat = true,
.reg_read = spd5118_nvmem_read,
.priv = data,
.stride = 1,
.word_size = 1,
.size = SPD5118_EEPROM_SIZE,
};
struct nvmem_device *nvmem;
nvmem = devm_nvmem_register(dev, &nvmem_config);
return PTR_ERR_OR_ZERO(nvmem);
}
/* regmap */
static bool spd5118_writeable_reg(struct device *dev, unsigned int reg)
{
switch (reg) {
case SPD5118_REG_I2C_LEGACY_MODE:
case SPD5118_REG_TEMP_CLR:
case SPD5118_REG_TEMP_CONFIG:
case SPD5118_REG_TEMP_MAX:
case SPD5118_REG_TEMP_MAX + 1:
case SPD5118_REG_TEMP_MIN:
case SPD5118_REG_TEMP_MIN + 1:
case SPD5118_REG_TEMP_CRIT:
case SPD5118_REG_TEMP_CRIT + 1:
case SPD5118_REG_TEMP_LCRIT:
case SPD5118_REG_TEMP_LCRIT + 1:
return true;
default:
return false;
}
}
static bool spd5118_volatile_reg(struct device *dev, unsigned int reg)
{
switch (reg) {
case SPD5118_REG_TEMP_CLR:
case SPD5118_REG_ERROR_CLR:
case SPD5118_REG_TEMP:
case SPD5118_REG_TEMP + 1:
case SPD5118_REG_TEMP_STATUS:
return true;
default:
return false;
}
}
static const struct regmap_range_cfg spd5118_regmap_range_cfg[] = {
{
.selector_reg = SPD5118_REG_I2C_LEGACY_MODE,
.selector_mask = SPD5118_LEGACY_PAGE_MASK,
.selector_shift = 0,
.window_start = 0,
.window_len = 0x100,
.range_min = 0,
.range_max = 0x7ff,
},
};
static const struct regmap_config spd5118_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
.max_register = 0x7ff,
.writeable_reg = spd5118_writeable_reg,
.volatile_reg = spd5118_volatile_reg,
.cache_type = REGCACHE_MAPLE,
.ranges = spd5118_regmap_range_cfg,
.num_ranges = ARRAY_SIZE(spd5118_regmap_range_cfg),
};
static int spd5118_init(struct i2c_client *client)
{
struct i2c_adapter *adapter = client->adapter;
int err, regval, mode;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA |
I2C_FUNC_SMBUS_WORD_DATA))
return -ENODEV;
regval = i2c_smbus_read_word_swapped(client, SPD5118_REG_TYPE);
if (regval < 0 || (regval && regval != 0x5118))
return -ENODEV;
/*
* If the device type registers return 0, it is possible that the chip
* has a non-zero page selected and takes the specification literally,
* i.e. disables access to volatile registers besides the page register
* if the page is not 0. Try to identify such chips.
*/
if (!regval) {
/* Vendor ID registers must also be 0 */
regval = i2c_smbus_read_word_data(client, SPD5118_REG_VENDOR);
if (regval)
return -ENODEV;
/* The selected page in MR11 must not be 0 */
mode = i2c_smbus_read_byte_data(client, SPD5118_REG_I2C_LEGACY_MODE);
if (mode < 0 || (mode & ~SPD5118_LEGACY_MODE_MASK) ||
!(mode & SPD5118_LEGACY_PAGE_MASK))
return -ENODEV;
err = i2c_smbus_write_byte_data(client, SPD5118_REG_I2C_LEGACY_MODE,
mode & SPD5118_LEGACY_MODE_ADDR);
if (err)
return -ENODEV;
/*
* If the device type registers are still bad after selecting
* page 0, this is not a SPD5118 device. Restore original
* legacy mode register value and abort.
*/
regval = i2c_smbus_read_word_swapped(client, SPD5118_REG_TYPE);
if (regval != 0x5118) {
i2c_smbus_write_byte_data(client, SPD5118_REG_I2C_LEGACY_MODE, mode);
return -ENODEV;
}
}
/* We are reasonably sure that this is really a SPD5118 hub controller */
return 0;
}
static int spd5118_probe(struct i2c_client *client)
{
struct device *dev = &client->dev;
unsigned int regval, revision, vendor, bank;
struct spd5118_data *data;
struct device *hwmon_dev;
struct regmap *regmap;
int err;
err = spd5118_init(client);
if (err)
return err;
data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
if (!data)
return -ENOMEM;
regmap = devm_regmap_init_i2c(client, &spd5118_regmap_config);
if (IS_ERR(regmap))
return dev_err_probe(dev, PTR_ERR(regmap), "regmap init failed\n");
err = regmap_read(regmap, SPD5118_REG_CAPABILITY, &regval);
if (err)
return err;
if (!(regval & SPD5118_CAP_TS_SUPPORT))
return -ENODEV;
err = regmap_read(regmap, SPD5118_REG_REVISION, &revision);
if (err)
return err;
err = regmap_read(regmap, SPD5118_REG_VENDOR, &bank);
if (err)
return err;
err = regmap_read(regmap, SPD5118_REG_VENDOR + 1, &vendor);
if (err)
return err;
if (!spd5118_vendor_valid(bank, vendor))
return -ENODEV;
data->regmap = regmap;
mutex_init(&data->nvmem_lock);
dev_set_drvdata(dev, data);
err = spd5118_nvmem_init(dev, data);
/* Ignore if NVMEM support is disabled */
if (err && err != -EOPNOTSUPP) {
dev_err_probe(dev, err, "failed to register nvmem\n");
return err;
}
hwmon_dev = devm_hwmon_device_register_with_info(dev, "spd5118",
regmap, &spd5118_chip_info,
NULL);
if (IS_ERR(hwmon_dev))
return PTR_ERR(hwmon_dev);
/*
* From JESD300-5B
* MR2 bits [5:4]: Major revision, 1..4
* MR2 bits [3:1]: Minor revision, 0..8? Probably a typo, assume 1..8
*/
dev_info(dev, "DDR5 temperature sensor: vendor 0x%02x:0x%02x revision %d.%d\n",
bank & 0x7f, vendor, ((revision >> 4) & 0x03) + 1, ((revision >> 1) & 0x07) + 1);
return 0;
}
static int spd5118_suspend(struct device *dev)
{
struct spd5118_data *data = dev_get_drvdata(dev);
struct regmap *regmap = data->regmap;
u32 regval;
int err;
/*
* Make sure the configuration register in the regmap cache is current
* before bypassing it.
*/
err = regmap_read(regmap, SPD5118_REG_TEMP_CONFIG, &regval);
if (err < 0)
return err;
regcache_cache_bypass(regmap, true);
regmap_update_bits(regmap, SPD5118_REG_TEMP_CONFIG, SPD5118_TS_DISABLE,
SPD5118_TS_DISABLE);
regcache_cache_bypass(regmap, false);
regcache_cache_only(regmap, true);
regcache_mark_dirty(regmap);
return 0;
}
static int spd5118_resume(struct device *dev)
{
struct spd5118_data *data = dev_get_drvdata(dev);
struct regmap *regmap = data->regmap;
regcache_cache_only(regmap, false);
return regcache_sync(regmap);
}
static DEFINE_SIMPLE_DEV_PM_OPS(spd5118_pm_ops, spd5118_suspend, spd5118_resume);
static const struct i2c_device_id spd5118_id[] = {
{ "spd5118", 0 },
{ }
};
MODULE_DEVICE_TABLE(i2c, spd5118_id);
static const struct of_device_id spd5118_of_ids[] = {
{ .compatible = "jedec,spd5118", },
{ }
};
MODULE_DEVICE_TABLE(of, spd5118_of_ids);
static struct i2c_driver spd5118_driver = {
.class = I2C_CLASS_HWMON,
.driver = {
.name = "spd5118",
.of_match_table = spd5118_of_ids,
.pm = pm_sleep_ptr(&spd5118_pm_ops),
},
.probe = spd5118_probe,
.id_table = spd5118_id,
.detect = IS_ENABLED(CONFIG_SENSORS_SPD5118_DETECT) ? spd5118_detect : NULL,
.address_list = IS_ENABLED(CONFIG_SENSORS_SPD5118_DETECT) ? normal_i2c : NULL,
};
module_i2c_driver(spd5118_driver);
MODULE_AUTHOR("René Rebe <rene@exactcode.de>");
MODULE_AUTHOR("Guenter Roeck <linux@roeck-us.net>");
MODULE_DESCRIPTION("SPD 5118 driver");
MODULE_LICENSE("GPL");
Reference in New Issue View Git Blame Copy Permalink