linux/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
Rob Herring abe60a3a7a ARM: dts: Kill off skeleton{64}.dtsi
Remove the usage of skeleton.dtsi in the remaining dts files. It was
deprecated since commit 9c0da3cc61 ("ARM: dts: explicitly mark
skeleton.dtsi as deprecated"). This will make adding a unit-address to
memory nodes easier.

The main tricky part to removing skeleton.dtsi is we could end up with
no /memory node at all when a bootloader depends on one being present. I
hacked up dtc to check for this condition.

Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Antoine Tenart <antoine.tenart@bootlin.com>
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Vladimir Zapolskiy <vz@mleia.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Tested-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-01-30 17:30:31 +01:00

135 lines
2.3 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
* Copyright (C) 2017 Rafał Miłecki <rafal@milecki.pl>
*/
/dts-v1/;
#include "bcm47081.dtsi"
/ {
compatible = "tplink,archer-c5-v2", "brcm,bcm47081", "brcm,bcm4708";
model = "TP-LINK Archer C5 V2";
chosen {
bootargs = "earlycon";
};
memory {
device_type = "memory";
reg = <0x00000000 0x08000000>;
};
leds {
compatible = "gpio-leds";
2ghz {
label = "bcm53xx:green:2ghz";
gpios = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
};
lan {
label = "bcm53xx:green:lan";
gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
};
usb2-port1 {
label = "bcm53xx:green:usb2-port1";
gpios = <&chipcommon 2 GPIO_ACTIVE_HIGH>;
trigger-sources = <&ohci_port1>, <&ehci_port1>;
linux,default-trigger = "usbport";
};
power {
label = "bcm53xx:green:power";
gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "default-on";
};
wan-green {
label = "bcm53xx:green:wan";
gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
};
wps {
label = "bcm53xx:green:wps";
gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
};
wan-amber {
label = "bcm53xx:amber:wan";
gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>;
};
5ghz {
label = "bcm53xx:green:5ghz";
gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
};
usb2-port2 {
label = "bcm53xx:green:usb2-port2";
gpios = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
trigger-sources = <&ohci_port2>, <&ehci_port2>;
linux,default-trigger = "usbport";
};
};
gpio-keys {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
rfkill {
label = "WiFi";
linux,code = <KEY_RFKILL>;
gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
};
restart {
label = "Reset";
linux,code = <KEY_RESTART>;
gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
};
};
};
&spi_nor {
status = "okay";
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
boot@0 {
label = "boot";
reg = <0x000000 0x040000>;
read-only;
};
os-image@100000 {
label = "os-image";
reg = <0x040000 0x200000>;
compatible = "brcm,trx";
};
rootfs@240000 {
label = "rootfs";
reg = <0x240000 0xc00000>;
};
nvram@ff0000 {
label = "nvram";
reg = <0xff0000 0x010000>;
};
};
};
&usb2 {
vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
};
&usb3_phy {
status = "okay";
};