Zhangfei Gao 6e14a5eeb1 net: phy: resume phydev when going to RESUMING ... With commit be9dad1f9f ("net: phy: suspend phydev when going to HALTED"), an unused PHY device will be put in a low-power mode using BMCR_PDOWN. Some Ethernet drivers might be calling phy_start() and phy_stop() from ndo_open and ndo_close() respectively, while calling phy_connect() and phy_disconnect() from probe and remove. In such a case, the PHY will be powered down during the phy_stop() call, but will fail to be powered up in phy_start(). This patch fixes this scenario. Signed-off-by: Jiancheng Xue <xuejiancheng@huawei.com> Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>		2014-05-16 15:17:58 -04:00
..
amd.c	phylib: Support registering a bunch of drivers	2012-07-09 00:10:56 -07:00
at803x.c	phy/at8031: enable at8031 to work on interrupt mode	2014-03-29 18:20:30 -04:00
bcm7xxx.c	net: phy: bcm7xxx: properly clear AFE_RX_LP_COUNTER	2014-03-26 16:19:24 -04:00
bcm63xx.c	phy: bcm63xx: report Broadcom BCM63xx PHYs as internal	2013-05-27 22:42:50 -07:00
bcm87xx.c	net/phy/bcm87xx: Add MODULE_LICENSE("GPL") to GPL driver	2012-09-22 15:33:46 -04:00
broadcom.c	net: phy: broadcom: extract register definitions	2014-02-14 00:27:58 -05:00
cicada.c	net: phy: cicada: fix checkpath errors	2013-12-18 00:49:01 -05:00
davicom.c	net: phy: davicom: fix checkpath errors	2013-12-18 00:49:01 -05:00
dp83640_reg.h	ptp: Added a clock driver for the National Semiconductor PHYTER.	2011-05-23 13:10:23 -07:00
dp83640.c	net: ptp: move PTP classifier in its own file	2014-04-01 16:43:18 -04:00
et1011c.c
fixed.c	phy: Use pr_<level>	2012-06-11 16:58:24 -07:00
icplus.c	net: phy: icplus: fix checkpath error	2013-12-18 00:49:02 -05:00
Kconfig	net: phy: add Broadcom BCM7xxx internal PHY driver	2014-02-14 00:27:58 -05:00
lxt.c	net: phy: lxt: fix checkpath errors	2013-12-18 00:49:02 -05:00
Makefile	net: phy: add Broadcom BCM7xxx internal PHY driver	2014-02-14 00:27:58 -05:00
marvell.c	net: phy: marvell: provide genphy suspend/resume	2013-12-17 14:42:44 -05:00
mdio_bus.c	net: phy: expose phydev->has_fixups to sysfs	2014-02-12 19:08:49 -05:00
mdio-bitbang.c	Revert "drivers/net/phy/mdio-bitbang.c: Call mdiobus_unregister before mdiobus_free"	2012-11-14 22:32:15 -05:00
mdio-gpio.c	net: mdio-gpio: warn about missing bus alias id	2014-05-09 15:51:19 -04:00
mdio-moxart.c	drivers/net: delete non-required instances of include <linux/init.h>	2014-01-16 11:53:26 -08:00
mdio-mux-gpio.c	drivers/net: delete non-required instances of include <linux/init.h>	2014-01-16 11:53:26 -08:00
mdio-mux-mmioreg.c	drivers/net: delete non-required instances of include <linux/init.h>	2014-01-16 11:53:26 -08:00
mdio-mux.c	netdev/phy: skip disabled mdio-mux nodes	2012-08-20 02:16:00 -07:00
mdio-octeon.c	drivers/net: delete non-required instances of include <linux/init.h>	2014-01-16 11:53:26 -08:00
mdio-sun4i.c	net: sun4i: remove empty MDIO bus reset function	2014-03-28 01:38:02 -04:00
micrel.c	net/phy: micrel: fix bugged test on device tree loading for ksz9021	2014-04-23 14:58:58 -04:00
national.c	phy: Use pr_<level>	2012-06-11 16:58:24 -07:00
phy_device.c	net: phy: Don't call phy_resume if phy_init_hw failed	2014-05-15 22:56:43 -04:00
phy.c	net: phy: resume phydev when going to RESUMING	2014-05-16 15:17:58 -04:00
qsemi.c
realtek.c	PHY: Add RTL8201CP phy_driver to realtek	2013-11-11 14:05:03 -05:00
smsc.c	net: phy: smsc: Fix config_init typo	2012-12-07 14:26:15 -05:00
spi_ks8995.c	net: Micrel KSZ8864RMN 4-port managed switch support	2014-04-03 16:15:29 -04:00
ste10Xp.c	phylib: Support registering a bunch of drivers	2012-07-09 00:10:56 -07:00
vitesse.c	phy: Add Vitesse 8514 phy ID	2013-11-28 18:30:54 -05:00