mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-16 08:44:21 +08:00
44521afa57
sama5d2 can use the same atmel_pwm_data as sama5d3. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
420 lines
10 KiB
C
420 lines
10 KiB
C
/*
|
|
* Driver for Atmel Pulse Width Modulation Controller
|
|
*
|
|
* Copyright (C) 2013 Atmel Corporation
|
|
* Bo Shen <voice.shen@atmel.com>
|
|
*
|
|
* Licensed under GPLv2.
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/err.h>
|
|
#include <linux/io.h>
|
|
#include <linux/module.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/pwm.h>
|
|
#include <linux/slab.h>
|
|
|
|
/* The following is global registers for PWM controller */
|
|
#define PWM_ENA 0x04
|
|
#define PWM_DIS 0x08
|
|
#define PWM_SR 0x0C
|
|
#define PWM_ISR 0x1C
|
|
/* Bit field in SR */
|
|
#define PWM_SR_ALL_CH_ON 0x0F
|
|
|
|
/* The following register is PWM channel related registers */
|
|
#define PWM_CH_REG_OFFSET 0x200
|
|
#define PWM_CH_REG_SIZE 0x20
|
|
|
|
#define PWM_CMR 0x0
|
|
/* Bit field in CMR */
|
|
#define PWM_CMR_CPOL (1 << 9)
|
|
#define PWM_CMR_UPD_CDTY (1 << 10)
|
|
#define PWM_CMR_CPRE_MSK 0xF
|
|
|
|
/* The following registers for PWM v1 */
|
|
#define PWMV1_CDTY 0x04
|
|
#define PWMV1_CPRD 0x08
|
|
#define PWMV1_CUPD 0x10
|
|
|
|
/* The following registers for PWM v2 */
|
|
#define PWMV2_CDTY 0x04
|
|
#define PWMV2_CDTYUPD 0x08
|
|
#define PWMV2_CPRD 0x0C
|
|
#define PWMV2_CPRDUPD 0x10
|
|
|
|
/*
|
|
* Max value for duty and period
|
|
*
|
|
* Although the duty and period register is 32 bit,
|
|
* however only the LSB 16 bits are significant.
|
|
*/
|
|
#define PWM_MAX_DTY 0xFFFF
|
|
#define PWM_MAX_PRD 0xFFFF
|
|
#define PRD_MAX_PRES 10
|
|
|
|
struct atmel_pwm_registers {
|
|
u8 period;
|
|
u8 period_upd;
|
|
u8 duty;
|
|
u8 duty_upd;
|
|
};
|
|
|
|
struct atmel_pwm_chip {
|
|
struct pwm_chip chip;
|
|
struct clk *clk;
|
|
void __iomem *base;
|
|
const struct atmel_pwm_registers *regs;
|
|
|
|
unsigned int updated_pwms;
|
|
/* ISR is cleared when read, ensure only one thread does that */
|
|
struct mutex isr_lock;
|
|
};
|
|
|
|
static inline struct atmel_pwm_chip *to_atmel_pwm_chip(struct pwm_chip *chip)
|
|
{
|
|
return container_of(chip, struct atmel_pwm_chip, chip);
|
|
}
|
|
|
|
static inline u32 atmel_pwm_readl(struct atmel_pwm_chip *chip,
|
|
unsigned long offset)
|
|
{
|
|
return readl_relaxed(chip->base + offset);
|
|
}
|
|
|
|
static inline void atmel_pwm_writel(struct atmel_pwm_chip *chip,
|
|
unsigned long offset, unsigned long val)
|
|
{
|
|
writel_relaxed(val, chip->base + offset);
|
|
}
|
|
|
|
static inline u32 atmel_pwm_ch_readl(struct atmel_pwm_chip *chip,
|
|
unsigned int ch, unsigned long offset)
|
|
{
|
|
unsigned long base = PWM_CH_REG_OFFSET + ch * PWM_CH_REG_SIZE;
|
|
|
|
return readl_relaxed(chip->base + base + offset);
|
|
}
|
|
|
|
static inline void atmel_pwm_ch_writel(struct atmel_pwm_chip *chip,
|
|
unsigned int ch, unsigned long offset,
|
|
unsigned long val)
|
|
{
|
|
unsigned long base = PWM_CH_REG_OFFSET + ch * PWM_CH_REG_SIZE;
|
|
|
|
writel_relaxed(val, chip->base + base + offset);
|
|
}
|
|
|
|
static int atmel_pwm_calculate_cprd_and_pres(struct pwm_chip *chip,
|
|
const struct pwm_state *state,
|
|
unsigned long *cprd, u32 *pres)
|
|
{
|
|
struct atmel_pwm_chip *atmel_pwm = to_atmel_pwm_chip(chip);
|
|
unsigned long long cycles = state->period;
|
|
|
|
/* Calculate the period cycles and prescale value */
|
|
cycles *= clk_get_rate(atmel_pwm->clk);
|
|
do_div(cycles, NSEC_PER_SEC);
|
|
|
|
for (*pres = 0; cycles > PWM_MAX_PRD; cycles >>= 1)
|
|
(*pres)++;
|
|
|
|
if (*pres > PRD_MAX_PRES) {
|
|
dev_err(chip->dev, "pres exceeds the maximum value\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
*cprd = cycles;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void atmel_pwm_calculate_cdty(const struct pwm_state *state,
|
|
unsigned long cprd, unsigned long *cdty)
|
|
{
|
|
unsigned long long cycles = state->duty_cycle;
|
|
|
|
cycles *= cprd;
|
|
do_div(cycles, state->period);
|
|
*cdty = cprd - cycles;
|
|
}
|
|
|
|
static void atmel_pwm_update_cdty(struct pwm_chip *chip, struct pwm_device *pwm,
|
|
unsigned long cdty)
|
|
{
|
|
struct atmel_pwm_chip *atmel_pwm = to_atmel_pwm_chip(chip);
|
|
u32 val;
|
|
|
|
if (atmel_pwm->regs->duty_upd ==
|
|
atmel_pwm->regs->period_upd) {
|
|
val = atmel_pwm_ch_readl(atmel_pwm, pwm->hwpwm, PWM_CMR);
|
|
val &= ~PWM_CMR_UPD_CDTY;
|
|
atmel_pwm_ch_writel(atmel_pwm, pwm->hwpwm, PWM_CMR, val);
|
|
}
|
|
|
|
atmel_pwm_ch_writel(atmel_pwm, pwm->hwpwm,
|
|
atmel_pwm->regs->duty_upd, cdty);
|
|
}
|
|
|
|
static void atmel_pwm_set_cprd_cdty(struct pwm_chip *chip,
|
|
struct pwm_device *pwm,
|
|
unsigned long cprd, unsigned long cdty)
|
|
{
|
|
struct atmel_pwm_chip *atmel_pwm = to_atmel_pwm_chip(chip);
|
|
|
|
atmel_pwm_ch_writel(atmel_pwm, pwm->hwpwm,
|
|
atmel_pwm->regs->duty, cdty);
|
|
atmel_pwm_ch_writel(atmel_pwm, pwm->hwpwm,
|
|
atmel_pwm->regs->period, cprd);
|
|
}
|
|
|
|
static void atmel_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm,
|
|
bool disable_clk)
|
|
{
|
|
struct atmel_pwm_chip *atmel_pwm = to_atmel_pwm_chip(chip);
|
|
unsigned long timeout = jiffies + 2 * HZ;
|
|
|
|
/*
|
|
* Wait for at least a complete period to have passed before disabling a
|
|
* channel to be sure that CDTY has been updated
|
|
*/
|
|
mutex_lock(&atmel_pwm->isr_lock);
|
|
atmel_pwm->updated_pwms |= atmel_pwm_readl(atmel_pwm, PWM_ISR);
|
|
|
|
while (!(atmel_pwm->updated_pwms & (1 << pwm->hwpwm)) &&
|
|
time_before(jiffies, timeout)) {
|
|
usleep_range(10, 100);
|
|
atmel_pwm->updated_pwms |= atmel_pwm_readl(atmel_pwm, PWM_ISR);
|
|
}
|
|
|
|
mutex_unlock(&atmel_pwm->isr_lock);
|
|
atmel_pwm_writel(atmel_pwm, PWM_DIS, 1 << pwm->hwpwm);
|
|
|
|
/*
|
|
* Wait for the PWM channel disable operation to be effective before
|
|
* stopping the clock.
|
|
*/
|
|
timeout = jiffies + 2 * HZ;
|
|
|
|
while ((atmel_pwm_readl(atmel_pwm, PWM_SR) & (1 << pwm->hwpwm)) &&
|
|
time_before(jiffies, timeout))
|
|
usleep_range(10, 100);
|
|
|
|
if (disable_clk)
|
|
clk_disable(atmel_pwm->clk);
|
|
}
|
|
|
|
static int atmel_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
|
|
struct pwm_state *state)
|
|
{
|
|
struct atmel_pwm_chip *atmel_pwm = to_atmel_pwm_chip(chip);
|
|
struct pwm_state cstate;
|
|
unsigned long cprd, cdty;
|
|
u32 pres, val;
|
|
int ret;
|
|
|
|
pwm_get_state(pwm, &cstate);
|
|
|
|
if (state->enabled) {
|
|
if (cstate.enabled &&
|
|
cstate.polarity == state->polarity &&
|
|
cstate.period == state->period) {
|
|
cprd = atmel_pwm_ch_readl(atmel_pwm, pwm->hwpwm,
|
|
atmel_pwm->regs->period);
|
|
atmel_pwm_calculate_cdty(state, cprd, &cdty);
|
|
atmel_pwm_update_cdty(chip, pwm, cdty);
|
|
return 0;
|
|
}
|
|
|
|
ret = atmel_pwm_calculate_cprd_and_pres(chip, state, &cprd,
|
|
&pres);
|
|
if (ret) {
|
|
dev_err(chip->dev,
|
|
"failed to calculate cprd and prescaler\n");
|
|
return ret;
|
|
}
|
|
|
|
atmel_pwm_calculate_cdty(state, cprd, &cdty);
|
|
|
|
if (cstate.enabled) {
|
|
atmel_pwm_disable(chip, pwm, false);
|
|
} else {
|
|
ret = clk_enable(atmel_pwm->clk);
|
|
if (ret) {
|
|
dev_err(chip->dev, "failed to enable clock\n");
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
/* It is necessary to preserve CPOL, inside CMR */
|
|
val = atmel_pwm_ch_readl(atmel_pwm, pwm->hwpwm, PWM_CMR);
|
|
val = (val & ~PWM_CMR_CPRE_MSK) | (pres & PWM_CMR_CPRE_MSK);
|
|
if (state->polarity == PWM_POLARITY_NORMAL)
|
|
val &= ~PWM_CMR_CPOL;
|
|
else
|
|
val |= PWM_CMR_CPOL;
|
|
atmel_pwm_ch_writel(atmel_pwm, pwm->hwpwm, PWM_CMR, val);
|
|
atmel_pwm_set_cprd_cdty(chip, pwm, cprd, cdty);
|
|
mutex_lock(&atmel_pwm->isr_lock);
|
|
atmel_pwm->updated_pwms |= atmel_pwm_readl(atmel_pwm, PWM_ISR);
|
|
atmel_pwm->updated_pwms &= ~(1 << pwm->hwpwm);
|
|
mutex_unlock(&atmel_pwm->isr_lock);
|
|
atmel_pwm_writel(atmel_pwm, PWM_ENA, 1 << pwm->hwpwm);
|
|
} else if (cstate.enabled) {
|
|
atmel_pwm_disable(chip, pwm, true);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct pwm_ops atmel_pwm_ops = {
|
|
.apply = atmel_pwm_apply,
|
|
.owner = THIS_MODULE,
|
|
};
|
|
|
|
static const struct atmel_pwm_registers atmel_pwm_regs_v1 = {
|
|
.period = PWMV1_CPRD,
|
|
.period_upd = PWMV1_CUPD,
|
|
.duty = PWMV1_CDTY,
|
|
.duty_upd = PWMV1_CUPD,
|
|
};
|
|
|
|
static const struct atmel_pwm_registers atmel_pwm_regs_v2 = {
|
|
.period = PWMV2_CPRD,
|
|
.period_upd = PWMV2_CPRDUPD,
|
|
.duty = PWMV2_CDTY,
|
|
.duty_upd = PWMV2_CDTYUPD,
|
|
};
|
|
|
|
static const struct platform_device_id atmel_pwm_devtypes[] = {
|
|
{
|
|
.name = "at91sam9rl-pwm",
|
|
.driver_data = (kernel_ulong_t)&atmel_pwm_regs_v1,
|
|
}, {
|
|
.name = "sama5d3-pwm",
|
|
.driver_data = (kernel_ulong_t)&atmel_pwm_regs_v2,
|
|
}, {
|
|
/* sentinel */
|
|
},
|
|
};
|
|
MODULE_DEVICE_TABLE(platform, atmel_pwm_devtypes);
|
|
|
|
static const struct of_device_id atmel_pwm_dt_ids[] = {
|
|
{
|
|
.compatible = "atmel,at91sam9rl-pwm",
|
|
.data = &atmel_pwm_regs_v1,
|
|
}, {
|
|
.compatible = "atmel,sama5d3-pwm",
|
|
.data = &atmel_pwm_regs_v2,
|
|
}, {
|
|
.compatible = "atmel,sama5d2-pwm",
|
|
.data = &atmel_pwm_regs_v2,
|
|
}, {
|
|
/* sentinel */
|
|
},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, atmel_pwm_dt_ids);
|
|
|
|
static inline const struct atmel_pwm_registers *
|
|
atmel_pwm_get_driver_data(struct platform_device *pdev)
|
|
{
|
|
const struct platform_device_id *id;
|
|
|
|
if (pdev->dev.of_node)
|
|
return of_device_get_match_data(&pdev->dev);
|
|
|
|
id = platform_get_device_id(pdev);
|
|
|
|
return (struct atmel_pwm_registers *)id->driver_data;
|
|
}
|
|
|
|
static int atmel_pwm_probe(struct platform_device *pdev)
|
|
{
|
|
const struct atmel_pwm_registers *regs;
|
|
struct atmel_pwm_chip *atmel_pwm;
|
|
struct resource *res;
|
|
int ret;
|
|
|
|
regs = atmel_pwm_get_driver_data(pdev);
|
|
if (!regs)
|
|
return -ENODEV;
|
|
|
|
atmel_pwm = devm_kzalloc(&pdev->dev, sizeof(*atmel_pwm), GFP_KERNEL);
|
|
if (!atmel_pwm)
|
|
return -ENOMEM;
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
atmel_pwm->base = devm_ioremap_resource(&pdev->dev, res);
|
|
if (IS_ERR(atmel_pwm->base))
|
|
return PTR_ERR(atmel_pwm->base);
|
|
|
|
atmel_pwm->clk = devm_clk_get(&pdev->dev, NULL);
|
|
if (IS_ERR(atmel_pwm->clk))
|
|
return PTR_ERR(atmel_pwm->clk);
|
|
|
|
ret = clk_prepare(atmel_pwm->clk);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "failed to prepare PWM clock\n");
|
|
return ret;
|
|
}
|
|
|
|
atmel_pwm->chip.dev = &pdev->dev;
|
|
atmel_pwm->chip.ops = &atmel_pwm_ops;
|
|
|
|
if (pdev->dev.of_node) {
|
|
atmel_pwm->chip.of_xlate = of_pwm_xlate_with_flags;
|
|
atmel_pwm->chip.of_pwm_n_cells = 3;
|
|
}
|
|
|
|
atmel_pwm->chip.base = -1;
|
|
atmel_pwm->chip.npwm = 4;
|
|
atmel_pwm->regs = regs;
|
|
atmel_pwm->updated_pwms = 0;
|
|
mutex_init(&atmel_pwm->isr_lock);
|
|
|
|
ret = pwmchip_add(&atmel_pwm->chip);
|
|
if (ret < 0) {
|
|
dev_err(&pdev->dev, "failed to add PWM chip %d\n", ret);
|
|
goto unprepare_clk;
|
|
}
|
|
|
|
platform_set_drvdata(pdev, atmel_pwm);
|
|
|
|
return ret;
|
|
|
|
unprepare_clk:
|
|
clk_unprepare(atmel_pwm->clk);
|
|
return ret;
|
|
}
|
|
|
|
static int atmel_pwm_remove(struct platform_device *pdev)
|
|
{
|
|
struct atmel_pwm_chip *atmel_pwm = platform_get_drvdata(pdev);
|
|
|
|
clk_unprepare(atmel_pwm->clk);
|
|
mutex_destroy(&atmel_pwm->isr_lock);
|
|
|
|
return pwmchip_remove(&atmel_pwm->chip);
|
|
}
|
|
|
|
static struct platform_driver atmel_pwm_driver = {
|
|
.driver = {
|
|
.name = "atmel-pwm",
|
|
.of_match_table = of_match_ptr(atmel_pwm_dt_ids),
|
|
},
|
|
.id_table = atmel_pwm_devtypes,
|
|
.probe = atmel_pwm_probe,
|
|
.remove = atmel_pwm_remove,
|
|
};
|
|
module_platform_driver(atmel_pwm_driver);
|
|
|
|
MODULE_ALIAS("platform:atmel-pwm");
|
|
MODULE_AUTHOR("Bo Shen <voice.shen@atmel.com>");
|
|
MODULE_DESCRIPTION("Atmel PWM driver");
|
|
MODULE_LICENSE("GPL v2");
|