linux/drivers/usb/dwc3/dwc3-omap.c
George Cherian c5a1fbca6f usb: dwc3: dwc3-omap: Fix the crash on module removal
Following crash is seen on dwc3_omap removal
Unable to handle kernel NULL pointer dereference at virtual address 00000018
pgd = ec098000
[00000018] *pgd=ad1f9831, *pte=00000000, *ppte=00000000
Internal error: Oops: 17 [#1] SMP ARM
Modules linked in: usb_f_ss_lb g_zero usb_f_acm u_serial usb_f_ecm u_ether libcomposite configfs snd_usb_audio snd_usbmidi_lib snd_rawmidi snd_hwdep snd_soc_omap snd_pcm_dmaengine snd_soc_core snd_compress snd_pcm snd_tim]
CPU: 0 PID: 1296 Comm: rmmod Tainted: G        W     3.15.0-rc4-02716-g95c4e18-dirty #10
task: ed05a080 ti: ec368000 task.ti: ec368000
PC is at release_resource+0x14/0x7c
LR is at release_resource+0x10/0x7c
pc : [<c0044724>]    lr : [<c0044720>]    psr: 60000013
sp : ec369ec0  ip : 60000013  fp : 00021008
r10: 00000000  r9 : ec368000  r8 : c000e7a4
r7 : 00000081  r6 : bf0062c0  r5 : ed7cd000  r4 : ed7d85c0
r3 : 00000000  r2 : 00000000  r1 : 00000011  r0 : c086d08c
Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment user
Control: 10c5387d  Table: ac098059  DAC: 00000015
Process rmmod (pid: 1296, stack limit = 0xec368248)
Stack: (0xec369ec0 to 0xec36a000)
9ec0: 00000000 00000001 ed7cd000 c034de94 ed7cd010 ed7cd000 00000000 c034e194
9ee0: 00000000 bf0062cc ed7cd010 c03490b0 ed154cc0 ed4c2570 ed2b8410 ed156810
ed156810 bf006d24 c034db9c c034db84 c034c518
9f20: bf006d24 ed156810 bf006d24 c034cd2c bf006d24 bf006d68 00000800 c034c340
9f40: 00000000 c00a9e5c 00000020 00000000 bf006d68 00000800 ec369f4c 33637764
9f60: 616d6f5f 00000070 00000001 ec368000 ed05a080 c000e670 00000001 c0084010
9f80: 00021088 00000800 00021088 00000081 80000010 0000e6f4 00021088 00000800
9fa0: 00021088 c000e5e0 00021088 00000800 000210b8 00000800 e04f6d00 e04f6d00
9fc0: 00021088 00000800 00021088 00000081 00000001 00000000 be91de08 00021008
9fe0: 4d768880 be91dbb4 b6fc5984 4d76888c 80000010 000210b8 00000000 00000000
[<c0044724>] (release_resource) from [<c034de94>] (platform_device_del+0x6c/0x9c)
[<c034de94>] (platform_device_del) from [<c034e194>] (platform_device_unregister+0xc/0x18)
[<c034e194>] (platform_device_unregister) from [<bf0062cc>] (dwc3_omap_remove_core+0xc/0x14 [dwc3_omap])
[<bf0062cc>] (dwc3_omap_remove_core [dwc3_omap]) from [<c03490b0>] (device_for_each_child+0x34/0x74)
[<c03490b0>] (device_for_each_child) from [<bf0062b4>] (dwc3_omap_remove+0x6c/0x78 [dwc3_omap])
[<bf0062b4>] (dwc3_omap_remove [dwc3_omap]) from [<c034db9c>] (platform_drv_remove+0x18/0x1c)
[<c034db9c>] (platform_drv_remove) from [<c034c518>] (__device_release_driver+0x70/0xc8)
[<c034c518>] (__device_release_driver) from [<c034cd2c>] (driver_detach+0xb4/0xb8)
[<c034cd2c>] (driver_detach) from [<c034c340>] (bus_remove_driver+0x4c/0x90)
[<c034c340>] (bus_remove_driver) from [<c00a9e5c>] (SyS_delete_module+0x10c/0x198)
[<c00a9e5c>] (SyS_delete_module) from [<c000e5e0>] (ret_fast_syscall+0x0/0x48)
Code: e1a04000 e59f0068 eb14505e e5943010 (e5932018)
---[ end trace 7e2a8746ff4fc811 ]---
Segmentation fault

[ balbi@ti.com : add CONFIG_OF dependency ]

Signed-off-by: George Cherian <george.cherian@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-06-19 10:06:28 -05:00

664 lines
17 KiB
C

/**
* dwc3-omap.c - OMAP Specific Glue layer
*
* Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com
*
* Authors: Felipe Balbi <balbi@ti.com>,
* Sebastian Andrzej Siewior <bigeasy@linutronix.de>
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 of
* the License as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/platform_data/dwc3-omap.h>
#include <linux/pm_runtime.h>
#include <linux/dma-mapping.h>
#include <linux/ioport.h>
#include <linux/io.h>
#include <linux/of.h>
#include <linux/of_platform.h>
#include <linux/extcon.h>
#include <linux/regulator/consumer.h>
#include <linux/usb/otg.h>
/*
* All these registers belong to OMAP's Wrapper around the
* DesignWare USB3 Core.
*/
#define USBOTGSS_REVISION 0x0000
#define USBOTGSS_SYSCONFIG 0x0010
#define USBOTGSS_IRQ_EOI 0x0020
#define USBOTGSS_EOI_OFFSET 0x0008
#define USBOTGSS_IRQSTATUS_RAW_0 0x0024
#define USBOTGSS_IRQSTATUS_0 0x0028
#define USBOTGSS_IRQENABLE_SET_0 0x002c
#define USBOTGSS_IRQENABLE_CLR_0 0x0030
#define USBOTGSS_IRQ0_OFFSET 0x0004
#define USBOTGSS_IRQSTATUS_RAW_1 0x0030
#define USBOTGSS_IRQSTATUS_1 0x0034
#define USBOTGSS_IRQENABLE_SET_1 0x0038
#define USBOTGSS_IRQENABLE_CLR_1 0x003c
#define USBOTGSS_IRQSTATUS_RAW_2 0x0040
#define USBOTGSS_IRQSTATUS_2 0x0044
#define USBOTGSS_IRQENABLE_SET_2 0x0048
#define USBOTGSS_IRQENABLE_CLR_2 0x004c
#define USBOTGSS_IRQSTATUS_RAW_3 0x0050
#define USBOTGSS_IRQSTATUS_3 0x0054
#define USBOTGSS_IRQENABLE_SET_3 0x0058
#define USBOTGSS_IRQENABLE_CLR_3 0x005c
#define USBOTGSS_IRQSTATUS_EOI_MISC 0x0030
#define USBOTGSS_IRQSTATUS_RAW_MISC 0x0034
#define USBOTGSS_IRQSTATUS_MISC 0x0038
#define USBOTGSS_IRQENABLE_SET_MISC 0x003c
#define USBOTGSS_IRQENABLE_CLR_MISC 0x0040
#define USBOTGSS_IRQMISC_OFFSET 0x03fc
#define USBOTGSS_UTMI_OTG_CTRL 0x0080
#define USBOTGSS_UTMI_OTG_STATUS 0x0084
#define USBOTGSS_UTMI_OTG_OFFSET 0x0480
#define USBOTGSS_TXFIFO_DEPTH 0x0508
#define USBOTGSS_RXFIFO_DEPTH 0x050c
#define USBOTGSS_MMRAM_OFFSET 0x0100
#define USBOTGSS_FLADJ 0x0104
#define USBOTGSS_DEBUG_CFG 0x0108
#define USBOTGSS_DEBUG_DATA 0x010c
#define USBOTGSS_DEV_EBC_EN 0x0110
#define USBOTGSS_DEBUG_OFFSET 0x0600
/* REVISION REGISTER */
#define USBOTGSS_REVISION_XMAJOR(reg) ((reg >> 8) & 0x7)
#define USBOTGSS_REVISION_XMAJOR1 1
#define USBOTGSS_REVISION_XMAJOR2 2
/* SYSCONFIG REGISTER */
#define USBOTGSS_SYSCONFIG_DMADISABLE (1 << 16)
/* IRQ_EOI REGISTER */
#define USBOTGSS_IRQ_EOI_LINE_NUMBER (1 << 0)
/* IRQS0 BITS */
#define USBOTGSS_IRQO_COREIRQ_ST (1 << 0)
/* IRQMISC BITS */
#define USBOTGSS_IRQMISC_DMADISABLECLR (1 << 17)
#define USBOTGSS_IRQMISC_OEVT (1 << 16)
#define USBOTGSS_IRQMISC_DRVVBUS_RISE (1 << 13)
#define USBOTGSS_IRQMISC_CHRGVBUS_RISE (1 << 12)
#define USBOTGSS_IRQMISC_DISCHRGVBUS_RISE (1 << 11)
#define USBOTGSS_IRQMISC_IDPULLUP_RISE (1 << 8)
#define USBOTGSS_IRQMISC_DRVVBUS_FALL (1 << 5)
#define USBOTGSS_IRQMISC_CHRGVBUS_FALL (1 << 4)
#define USBOTGSS_IRQMISC_DISCHRGVBUS_FALL (1 << 3)
#define USBOTGSS_IRQMISC_IDPULLUP_FALL (1 << 0)
/* UTMI_OTG_CTRL REGISTER */
#define USBOTGSS_UTMI_OTG_CTRL_DRVVBUS (1 << 5)
#define USBOTGSS_UTMI_OTG_CTRL_CHRGVBUS (1 << 4)
#define USBOTGSS_UTMI_OTG_CTRL_DISCHRGVBUS (1 << 3)
#define USBOTGSS_UTMI_OTG_CTRL_IDPULLUP (1 << 0)
/* UTMI_OTG_STATUS REGISTER */
#define USBOTGSS_UTMI_OTG_STATUS_SW_MODE (1 << 31)
#define USBOTGSS_UTMI_OTG_STATUS_POWERPRESENT (1 << 9)
#define USBOTGSS_UTMI_OTG_STATUS_TXBITSTUFFENABLE (1 << 8)
#define USBOTGSS_UTMI_OTG_STATUS_IDDIG (1 << 4)
#define USBOTGSS_UTMI_OTG_STATUS_SESSEND (1 << 3)
#define USBOTGSS_UTMI_OTG_STATUS_SESSVALID (1 << 2)
#define USBOTGSS_UTMI_OTG_STATUS_VBUSVALID (1 << 1)
struct dwc3_omap {
struct device *dev;
int irq;
void __iomem *base;
u32 utmi_otg_status;
u32 utmi_otg_offset;
u32 irqmisc_offset;
u32 irq_eoi_offset;
u32 debug_offset;
u32 irq0_offset;
u32 revision;
u32 dma_status:1;
struct extcon_specific_cable_nb extcon_vbus_dev;
struct extcon_specific_cable_nb extcon_id_dev;
struct notifier_block vbus_nb;
struct notifier_block id_nb;
struct regulator *vbus_reg;
};
enum omap_dwc3_vbus_id_status {
OMAP_DWC3_ID_FLOAT,
OMAP_DWC3_ID_GROUND,
OMAP_DWC3_VBUS_OFF,
OMAP_DWC3_VBUS_VALID,
};
static inline u32 dwc3_omap_readl(void __iomem *base, u32 offset)
{
return readl(base + offset);
}
static inline void dwc3_omap_writel(void __iomem *base, u32 offset, u32 value)
{
writel(value, base + offset);
}
static u32 dwc3_omap_read_utmi_status(struct dwc3_omap *omap)
{
return dwc3_omap_readl(omap->base, USBOTGSS_UTMI_OTG_STATUS +
omap->utmi_otg_offset);
}
static void dwc3_omap_write_utmi_status(struct dwc3_omap *omap, u32 value)
{
dwc3_omap_writel(omap->base, USBOTGSS_UTMI_OTG_STATUS +
omap->utmi_otg_offset, value);
}
static u32 dwc3_omap_read_irq0_status(struct dwc3_omap *omap)
{
return dwc3_omap_readl(omap->base, USBOTGSS_IRQSTATUS_0 -
omap->irq0_offset);
}
static void dwc3_omap_write_irq0_status(struct dwc3_omap *omap, u32 value)
{
dwc3_omap_writel(omap->base, USBOTGSS_IRQSTATUS_0 -
omap->irq0_offset, value);
}
static u32 dwc3_omap_read_irqmisc_status(struct dwc3_omap *omap)
{
return dwc3_omap_readl(omap->base, USBOTGSS_IRQSTATUS_MISC +
omap->irqmisc_offset);
}
static void dwc3_omap_write_irqmisc_status(struct dwc3_omap *omap, u32 value)
{
dwc3_omap_writel(omap->base, USBOTGSS_IRQSTATUS_MISC +
omap->irqmisc_offset, value);
}
static void dwc3_omap_write_irqmisc_set(struct dwc3_omap *omap, u32 value)
{
dwc3_omap_writel(omap->base, USBOTGSS_IRQENABLE_SET_MISC +
omap->irqmisc_offset, value);
}
static void dwc3_omap_write_irq0_set(struct dwc3_omap *omap, u32 value)
{
dwc3_omap_writel(omap->base, USBOTGSS_IRQENABLE_SET_0 -
omap->irq0_offset, value);
}
static void dwc3_omap_set_mailbox(struct dwc3_omap *omap,
enum omap_dwc3_vbus_id_status status)
{
int ret;
u32 val;
switch (status) {
case OMAP_DWC3_ID_GROUND:
dev_dbg(omap->dev, "ID GND\n");
if (omap->vbus_reg) {
ret = regulator_enable(omap->vbus_reg);
if (ret) {
dev_dbg(omap->dev, "regulator enable failed\n");
return;
}
}
val = dwc3_omap_read_utmi_status(omap);
val &= ~(USBOTGSS_UTMI_OTG_STATUS_IDDIG
| USBOTGSS_UTMI_OTG_STATUS_VBUSVALID
| USBOTGSS_UTMI_OTG_STATUS_SESSEND);
val |= USBOTGSS_UTMI_OTG_STATUS_SESSVALID
| USBOTGSS_UTMI_OTG_STATUS_POWERPRESENT;
dwc3_omap_write_utmi_status(omap, val);
break;
case OMAP_DWC3_VBUS_VALID:
dev_dbg(omap->dev, "VBUS Connect\n");
val = dwc3_omap_read_utmi_status(omap);
val &= ~USBOTGSS_UTMI_OTG_STATUS_SESSEND;
val |= USBOTGSS_UTMI_OTG_STATUS_IDDIG
| USBOTGSS_UTMI_OTG_STATUS_VBUSVALID
| USBOTGSS_UTMI_OTG_STATUS_SESSVALID
| USBOTGSS_UTMI_OTG_STATUS_POWERPRESENT;
dwc3_omap_write_utmi_status(omap, val);
break;
case OMAP_DWC3_ID_FLOAT:
if (omap->vbus_reg)
regulator_disable(omap->vbus_reg);
case OMAP_DWC3_VBUS_OFF:
dev_dbg(omap->dev, "VBUS Disconnect\n");
val = dwc3_omap_read_utmi_status(omap);
val &= ~(USBOTGSS_UTMI_OTG_STATUS_SESSVALID
| USBOTGSS_UTMI_OTG_STATUS_VBUSVALID
| USBOTGSS_UTMI_OTG_STATUS_POWERPRESENT);
val |= USBOTGSS_UTMI_OTG_STATUS_SESSEND
| USBOTGSS_UTMI_OTG_STATUS_IDDIG;
dwc3_omap_write_utmi_status(omap, val);
break;
default:
dev_dbg(omap->dev, "invalid state\n");
}
}
static irqreturn_t dwc3_omap_interrupt(int irq, void *_omap)
{
struct dwc3_omap *omap = _omap;
u32 reg;
reg = dwc3_omap_read_irqmisc_status(omap);
if (reg & USBOTGSS_IRQMISC_DMADISABLECLR) {
dev_dbg(omap->dev, "DMA Disable was Cleared\n");
omap->dma_status = false;
}
if (reg & USBOTGSS_IRQMISC_OEVT)
dev_dbg(omap->dev, "OTG Event\n");
if (reg & USBOTGSS_IRQMISC_DRVVBUS_RISE)
dev_dbg(omap->dev, "DRVVBUS Rise\n");
if (reg & USBOTGSS_IRQMISC_CHRGVBUS_RISE)
dev_dbg(omap->dev, "CHRGVBUS Rise\n");
if (reg & USBOTGSS_IRQMISC_DISCHRGVBUS_RISE)
dev_dbg(omap->dev, "DISCHRGVBUS Rise\n");
if (reg & USBOTGSS_IRQMISC_IDPULLUP_RISE)
dev_dbg(omap->dev, "IDPULLUP Rise\n");
if (reg & USBOTGSS_IRQMISC_DRVVBUS_FALL)
dev_dbg(omap->dev, "DRVVBUS Fall\n");
if (reg & USBOTGSS_IRQMISC_CHRGVBUS_FALL)
dev_dbg(omap->dev, "CHRGVBUS Fall\n");
if (reg & USBOTGSS_IRQMISC_DISCHRGVBUS_FALL)
dev_dbg(omap->dev, "DISCHRGVBUS Fall\n");
if (reg & USBOTGSS_IRQMISC_IDPULLUP_FALL)
dev_dbg(omap->dev, "IDPULLUP Fall\n");
dwc3_omap_write_irqmisc_status(omap, reg);
reg = dwc3_omap_read_irq0_status(omap);
dwc3_omap_write_irq0_status(omap, reg);
return IRQ_HANDLED;
}
static int dwc3_omap_remove_core(struct device *dev, void *c)
{
struct platform_device *pdev = to_platform_device(dev);
of_device_unregister(pdev);
return 0;
}
static void dwc3_omap_enable_irqs(struct dwc3_omap *omap)
{
u32 reg;
/* enable all IRQs */
reg = USBOTGSS_IRQO_COREIRQ_ST;
dwc3_omap_write_irq0_set(omap, reg);
reg = (USBOTGSS_IRQMISC_OEVT |
USBOTGSS_IRQMISC_DRVVBUS_RISE |
USBOTGSS_IRQMISC_CHRGVBUS_RISE |
USBOTGSS_IRQMISC_DISCHRGVBUS_RISE |
USBOTGSS_IRQMISC_IDPULLUP_RISE |
USBOTGSS_IRQMISC_DRVVBUS_FALL |
USBOTGSS_IRQMISC_CHRGVBUS_FALL |
USBOTGSS_IRQMISC_DISCHRGVBUS_FALL |
USBOTGSS_IRQMISC_IDPULLUP_FALL);
dwc3_omap_write_irqmisc_set(omap, reg);
}
static void dwc3_omap_disable_irqs(struct dwc3_omap *omap)
{
/* disable all IRQs */
dwc3_omap_write_irqmisc_set(omap, 0x00);
dwc3_omap_write_irq0_set(omap, 0x00);
}
static u64 dwc3_omap_dma_mask = DMA_BIT_MASK(32);
static int dwc3_omap_id_notifier(struct notifier_block *nb,
unsigned long event, void *ptr)
{
struct dwc3_omap *omap = container_of(nb, struct dwc3_omap, id_nb);
if (event)
dwc3_omap_set_mailbox(omap, OMAP_DWC3_ID_GROUND);
else
dwc3_omap_set_mailbox(omap, OMAP_DWC3_ID_FLOAT);
return NOTIFY_DONE;
}
static int dwc3_omap_vbus_notifier(struct notifier_block *nb,
unsigned long event, void *ptr)
{
struct dwc3_omap *omap = container_of(nb, struct dwc3_omap, vbus_nb);
if (event)
dwc3_omap_set_mailbox(omap, OMAP_DWC3_VBUS_VALID);
else
dwc3_omap_set_mailbox(omap, OMAP_DWC3_VBUS_OFF);
return NOTIFY_DONE;
}
static int dwc3_omap_probe(struct platform_device *pdev)
{
struct device_node *node = pdev->dev.of_node;
struct dwc3_omap *omap;
struct resource *res;
struct device *dev = &pdev->dev;
struct extcon_dev *edev;
struct regulator *vbus_reg = NULL;
int ret;
int irq;
int utmi_mode = 0;
int x_major;
u32 reg;
void __iomem *base;
if (!node) {
dev_err(dev, "device node not found\n");
return -EINVAL;
}
omap = devm_kzalloc(dev, sizeof(*omap), GFP_KERNEL);
if (!omap) {
dev_err(dev, "not enough memory\n");
return -ENOMEM;
}
platform_set_drvdata(pdev, omap);
irq = platform_get_irq(pdev, 0);
if (irq < 0) {
dev_err(dev, "missing IRQ resource\n");
return -EINVAL;
}
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
base = devm_ioremap_resource(dev, res);
if (IS_ERR(base))
return PTR_ERR(base);
if (of_property_read_bool(node, "vbus-supply")) {
vbus_reg = devm_regulator_get(dev, "vbus");
if (IS_ERR(vbus_reg)) {
dev_err(dev, "vbus init failed\n");
return PTR_ERR(vbus_reg);
}
}
omap->dev = dev;
omap->irq = irq;
omap->base = base;
omap->vbus_reg = vbus_reg;
dev->dma_mask = &dwc3_omap_dma_mask;
pm_runtime_enable(dev);
ret = pm_runtime_get_sync(dev);
if (ret < 0) {
dev_err(dev, "get_sync failed with err %d\n", ret);
goto err0;
}
reg = dwc3_omap_readl(omap->base, USBOTGSS_REVISION);
omap->revision = reg;
x_major = USBOTGSS_REVISION_XMAJOR(reg);
/* Differentiate between OMAP5 and AM437x */
switch (x_major) {
case USBOTGSS_REVISION_XMAJOR1:
case USBOTGSS_REVISION_XMAJOR2:
omap->irq_eoi_offset = 0;
omap->irq0_offset = 0;
omap->irqmisc_offset = 0;
omap->utmi_otg_offset = 0;
omap->debug_offset = 0;
break;
default:
/* Default to the latest revision */
omap->irq_eoi_offset = USBOTGSS_EOI_OFFSET;
omap->irq0_offset = USBOTGSS_IRQ0_OFFSET;
omap->irqmisc_offset = USBOTGSS_IRQMISC_OFFSET;
omap->utmi_otg_offset = USBOTGSS_UTMI_OTG_OFFSET;
omap->debug_offset = USBOTGSS_DEBUG_OFFSET;
break;
}
/* For OMAP5(ES2.0) and AM437x x_major is 2 even though there are
* changes in wrapper registers, Using dt compatible for aegis
*/
if (of_device_is_compatible(node, "ti,am437x-dwc3")) {
omap->irq_eoi_offset = USBOTGSS_EOI_OFFSET;
omap->irq0_offset = USBOTGSS_IRQ0_OFFSET;
omap->irqmisc_offset = USBOTGSS_IRQMISC_OFFSET;
omap->utmi_otg_offset = USBOTGSS_UTMI_OTG_OFFSET;
omap->debug_offset = USBOTGSS_DEBUG_OFFSET;
}
reg = dwc3_omap_read_utmi_status(omap);
of_property_read_u32(node, "utmi-mode", &utmi_mode);
switch (utmi_mode) {
case DWC3_OMAP_UTMI_MODE_SW:
reg |= USBOTGSS_UTMI_OTG_STATUS_SW_MODE;
break;
case DWC3_OMAP_UTMI_MODE_HW:
reg &= ~USBOTGSS_UTMI_OTG_STATUS_SW_MODE;
break;
default:
dev_dbg(dev, "UNKNOWN utmi mode %d\n", utmi_mode);
}
dwc3_omap_write_utmi_status(omap, reg);
/* check the DMA Status */
reg = dwc3_omap_readl(omap->base, USBOTGSS_SYSCONFIG);
omap->dma_status = !!(reg & USBOTGSS_SYSCONFIG_DMADISABLE);
ret = devm_request_irq(dev, omap->irq, dwc3_omap_interrupt, 0,
"dwc3-omap", omap);
if (ret) {
dev_err(dev, "failed to request IRQ #%d --> %d\n",
omap->irq, ret);
goto err1;
}
dwc3_omap_enable_irqs(omap);
if (of_property_read_bool(node, "extcon")) {
edev = extcon_get_edev_by_phandle(dev, 0);
if (IS_ERR(edev)) {
dev_vdbg(dev, "couldn't get extcon device\n");
ret = -EPROBE_DEFER;
goto err2;
}
omap->vbus_nb.notifier_call = dwc3_omap_vbus_notifier;
ret = extcon_register_interest(&omap->extcon_vbus_dev,
edev->name, "USB", &omap->vbus_nb);
if (ret < 0)
dev_vdbg(dev, "failed to register notifier for USB\n");
omap->id_nb.notifier_call = dwc3_omap_id_notifier;
ret = extcon_register_interest(&omap->extcon_id_dev, edev->name,
"USB-HOST", &omap->id_nb);
if (ret < 0)
dev_vdbg(dev,
"failed to register notifier for USB-HOST\n");
if (extcon_get_cable_state(edev, "USB") == true)
dwc3_omap_set_mailbox(omap, OMAP_DWC3_VBUS_VALID);
if (extcon_get_cable_state(edev, "USB-HOST") == true)
dwc3_omap_set_mailbox(omap, OMAP_DWC3_ID_GROUND);
}
ret = of_platform_populate(node, NULL, NULL, dev);
if (ret) {
dev_err(&pdev->dev, "failed to create dwc3 core\n");
goto err3;
}
return 0;
err3:
if (omap->extcon_vbus_dev.edev)
extcon_unregister_interest(&omap->extcon_vbus_dev);
if (omap->extcon_id_dev.edev)
extcon_unregister_interest(&omap->extcon_id_dev);
err2:
dwc3_omap_disable_irqs(omap);
err1:
pm_runtime_put_sync(dev);
err0:
pm_runtime_disable(dev);
return ret;
}
static int dwc3_omap_remove(struct platform_device *pdev)
{
struct dwc3_omap *omap = platform_get_drvdata(pdev);
if (omap->extcon_vbus_dev.edev)
extcon_unregister_interest(&omap->extcon_vbus_dev);
if (omap->extcon_id_dev.edev)
extcon_unregister_interest(&omap->extcon_id_dev);
dwc3_omap_disable_irqs(omap);
pm_runtime_put_sync(&pdev->dev);
pm_runtime_disable(&pdev->dev);
device_for_each_child(&pdev->dev, NULL, dwc3_omap_remove_core);
return 0;
}
static const struct of_device_id of_dwc3_match[] = {
{
.compatible = "ti,dwc3"
},
{
.compatible = "ti,am437x-dwc3"
},
{ },
};
MODULE_DEVICE_TABLE(of, of_dwc3_match);
#ifdef CONFIG_PM_SLEEP
static int dwc3_omap_prepare(struct device *dev)
{
struct dwc3_omap *omap = dev_get_drvdata(dev);
dwc3_omap_disable_irqs(omap);
return 0;
}
static void dwc3_omap_complete(struct device *dev)
{
struct dwc3_omap *omap = dev_get_drvdata(dev);
dwc3_omap_enable_irqs(omap);
}
static int dwc3_omap_suspend(struct device *dev)
{
struct dwc3_omap *omap = dev_get_drvdata(dev);
omap->utmi_otg_status = dwc3_omap_read_utmi_status(omap);
return 0;
}
static int dwc3_omap_resume(struct device *dev)
{
struct dwc3_omap *omap = dev_get_drvdata(dev);
dwc3_omap_write_utmi_status(omap, omap->utmi_otg_status);
pm_runtime_disable(dev);
pm_runtime_set_active(dev);
pm_runtime_enable(dev);
return 0;
}
static const struct dev_pm_ops dwc3_omap_dev_pm_ops = {
.prepare = dwc3_omap_prepare,
.complete = dwc3_omap_complete,
SET_SYSTEM_SLEEP_PM_OPS(dwc3_omap_suspend, dwc3_omap_resume)
};
#define DEV_PM_OPS (&dwc3_omap_dev_pm_ops)
#else
#define DEV_PM_OPS NULL
#endif /* CONFIG_PM_SLEEP */
static struct platform_driver dwc3_omap_driver = {
.probe = dwc3_omap_probe,
.remove = dwc3_omap_remove,
.driver = {
.name = "omap-dwc3",
.of_match_table = of_dwc3_match,
.pm = DEV_PM_OPS,
},
};
module_platform_driver(dwc3_omap_driver);
MODULE_ALIAS("platform:omap-dwc3");
MODULE_AUTHOR("Felipe Balbi <balbi@ti.com>");
MODULE_LICENSE("GPL v2");
MODULE_DESCRIPTION("DesignWare USB3 OMAP Glue Layer");