mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-18 09:44:18 +08:00
459ad68893
Spurious NCQ completion detection implemented in ahci was incorrect.
On AHCI receving and processing FISes and raising interrupts are not
interlocked and spurious interrupts are expected.
For example, if an interrupt occurs while interrupt handler is running
and the running interrupt handler handles the event the new IRQ
indicated, after IRQ handler finishes, it will be executed again
because IRQ pending bit is set by the new interrupt but there won't be
anything to process.
Please read the following message for more information.
http://article.gmane.org/gmane.linux.ide/26012
This patch...
* Removes all spurious IRQ whining from ahci. Spurious NCQ completion
detection was completely wrong. Spurious D2H Register FIS taught us
that some early drives send spurious D2H Register FIS with I bit set
while NCQ commands are in progress but none of recent drives does
that and even the ones which show such behavior can do NCQ fine.
* Kills all NCQ blacklist entries which were added because of spurious
NCQ completions. I tracked down each commit and verified all
removed ones are actually added because of spurious completions.
WD740ADFD-00NLR1 wasn't deleted but moved upward because the drive
not only had spurious NCQ completions but also is slow on sequential
data transfers if NCQ is enabled.
Maxtor 7V300F0 was added by 0e3dbc01d5
from Alan Cox. I can only find evidences that the drive only had
troubles with spuruious completions by searching the mailing list.
This entry needs to be verified and removed if it doesn't have other
NCQ related problems.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2309 lines
62 KiB
C
2309 lines
62 KiB
C
/*
|
|
* ahci.c - AHCI SATA support
|
|
*
|
|
* Maintained by: Jeff Garzik <jgarzik@pobox.com>
|
|
* Please ALWAYS copy linux-ide@vger.kernel.org
|
|
* on emails.
|
|
*
|
|
* Copyright 2004-2005 Red Hat, Inc.
|
|
*
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2, or (at your option)
|
|
* any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; see the file COPYING. If not, write to
|
|
* the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*
|
|
*
|
|
* libata documentation is available via 'make {ps|pdf}docs',
|
|
* as Documentation/DocBook/libata.*
|
|
*
|
|
* AHCI hardware documentation:
|
|
* http://www.intel.com/technology/serialata/pdf/rev1_0.pdf
|
|
* http://www.intel.com/technology/serialata/pdf/rev1_1.pdf
|
|
*
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/init.h>
|
|
#include <linux/blkdev.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/device.h>
|
|
#include <linux/dmi.h>
|
|
#include <scsi/scsi_host.h>
|
|
#include <scsi/scsi_cmnd.h>
|
|
#include <linux/libata.h>
|
|
|
|
#define DRV_NAME "ahci"
|
|
#define DRV_VERSION "3.0"
|
|
|
|
static int ahci_enable_alpm(struct ata_port *ap,
|
|
enum link_pm policy);
|
|
static void ahci_disable_alpm(struct ata_port *ap);
|
|
|
|
enum {
|
|
AHCI_PCI_BAR = 5,
|
|
AHCI_MAX_PORTS = 32,
|
|
AHCI_MAX_SG = 168, /* hardware max is 64K */
|
|
AHCI_DMA_BOUNDARY = 0xffffffff,
|
|
AHCI_USE_CLUSTERING = 1,
|
|
AHCI_MAX_CMDS = 32,
|
|
AHCI_CMD_SZ = 32,
|
|
AHCI_CMD_SLOT_SZ = AHCI_MAX_CMDS * AHCI_CMD_SZ,
|
|
AHCI_RX_FIS_SZ = 256,
|
|
AHCI_CMD_TBL_CDB = 0x40,
|
|
AHCI_CMD_TBL_HDR_SZ = 0x80,
|
|
AHCI_CMD_TBL_SZ = AHCI_CMD_TBL_HDR_SZ + (AHCI_MAX_SG * 16),
|
|
AHCI_CMD_TBL_AR_SZ = AHCI_CMD_TBL_SZ * AHCI_MAX_CMDS,
|
|
AHCI_PORT_PRIV_DMA_SZ = AHCI_CMD_SLOT_SZ + AHCI_CMD_TBL_AR_SZ +
|
|
AHCI_RX_FIS_SZ,
|
|
AHCI_IRQ_ON_SG = (1 << 31),
|
|
AHCI_CMD_ATAPI = (1 << 5),
|
|
AHCI_CMD_WRITE = (1 << 6),
|
|
AHCI_CMD_PREFETCH = (1 << 7),
|
|
AHCI_CMD_RESET = (1 << 8),
|
|
AHCI_CMD_CLR_BUSY = (1 << 10),
|
|
|
|
RX_FIS_D2H_REG = 0x40, /* offset of D2H Register FIS data */
|
|
RX_FIS_SDB = 0x58, /* offset of SDB FIS data */
|
|
RX_FIS_UNK = 0x60, /* offset of Unknown FIS data */
|
|
|
|
board_ahci = 0,
|
|
board_ahci_vt8251 = 1,
|
|
board_ahci_ign_iferr = 2,
|
|
board_ahci_sb600 = 3,
|
|
board_ahci_mv = 4,
|
|
|
|
/* global controller registers */
|
|
HOST_CAP = 0x00, /* host capabilities */
|
|
HOST_CTL = 0x04, /* global host control */
|
|
HOST_IRQ_STAT = 0x08, /* interrupt status */
|
|
HOST_PORTS_IMPL = 0x0c, /* bitmap of implemented ports */
|
|
HOST_VERSION = 0x10, /* AHCI spec. version compliancy */
|
|
|
|
/* HOST_CTL bits */
|
|
HOST_RESET = (1 << 0), /* reset controller; self-clear */
|
|
HOST_IRQ_EN = (1 << 1), /* global IRQ enable */
|
|
HOST_AHCI_EN = (1 << 31), /* AHCI enabled */
|
|
|
|
/* HOST_CAP bits */
|
|
HOST_CAP_SSC = (1 << 14), /* Slumber capable */
|
|
HOST_CAP_PMP = (1 << 17), /* Port Multiplier support */
|
|
HOST_CAP_CLO = (1 << 24), /* Command List Override support */
|
|
HOST_CAP_ALPM = (1 << 26), /* Aggressive Link PM support */
|
|
HOST_CAP_SSS = (1 << 27), /* Staggered Spin-up */
|
|
HOST_CAP_SNTF = (1 << 29), /* SNotification register */
|
|
HOST_CAP_NCQ = (1 << 30), /* Native Command Queueing */
|
|
HOST_CAP_64 = (1 << 31), /* PCI DAC (64-bit DMA) support */
|
|
|
|
/* registers for each SATA port */
|
|
PORT_LST_ADDR = 0x00, /* command list DMA addr */
|
|
PORT_LST_ADDR_HI = 0x04, /* command list DMA addr hi */
|
|
PORT_FIS_ADDR = 0x08, /* FIS rx buf addr */
|
|
PORT_FIS_ADDR_HI = 0x0c, /* FIS rx buf addr hi */
|
|
PORT_IRQ_STAT = 0x10, /* interrupt status */
|
|
PORT_IRQ_MASK = 0x14, /* interrupt enable/disable mask */
|
|
PORT_CMD = 0x18, /* port command */
|
|
PORT_TFDATA = 0x20, /* taskfile data */
|
|
PORT_SIG = 0x24, /* device TF signature */
|
|
PORT_CMD_ISSUE = 0x38, /* command issue */
|
|
PORT_SCR_STAT = 0x28, /* SATA phy register: SStatus */
|
|
PORT_SCR_CTL = 0x2c, /* SATA phy register: SControl */
|
|
PORT_SCR_ERR = 0x30, /* SATA phy register: SError */
|
|
PORT_SCR_ACT = 0x34, /* SATA phy register: SActive */
|
|
PORT_SCR_NTF = 0x3c, /* SATA phy register: SNotification */
|
|
|
|
/* PORT_IRQ_{STAT,MASK} bits */
|
|
PORT_IRQ_COLD_PRES = (1 << 31), /* cold presence detect */
|
|
PORT_IRQ_TF_ERR = (1 << 30), /* task file error */
|
|
PORT_IRQ_HBUS_ERR = (1 << 29), /* host bus fatal error */
|
|
PORT_IRQ_HBUS_DATA_ERR = (1 << 28), /* host bus data error */
|
|
PORT_IRQ_IF_ERR = (1 << 27), /* interface fatal error */
|
|
PORT_IRQ_IF_NONFATAL = (1 << 26), /* interface non-fatal error */
|
|
PORT_IRQ_OVERFLOW = (1 << 24), /* xfer exhausted available S/G */
|
|
PORT_IRQ_BAD_PMP = (1 << 23), /* incorrect port multiplier */
|
|
|
|
PORT_IRQ_PHYRDY = (1 << 22), /* PhyRdy changed */
|
|
PORT_IRQ_DEV_ILCK = (1 << 7), /* device interlock */
|
|
PORT_IRQ_CONNECT = (1 << 6), /* port connect change status */
|
|
PORT_IRQ_SG_DONE = (1 << 5), /* descriptor processed */
|
|
PORT_IRQ_UNK_FIS = (1 << 4), /* unknown FIS rx'd */
|
|
PORT_IRQ_SDB_FIS = (1 << 3), /* Set Device Bits FIS rx'd */
|
|
PORT_IRQ_DMAS_FIS = (1 << 2), /* DMA Setup FIS rx'd */
|
|
PORT_IRQ_PIOS_FIS = (1 << 1), /* PIO Setup FIS rx'd */
|
|
PORT_IRQ_D2H_REG_FIS = (1 << 0), /* D2H Register FIS rx'd */
|
|
|
|
PORT_IRQ_FREEZE = PORT_IRQ_HBUS_ERR |
|
|
PORT_IRQ_IF_ERR |
|
|
PORT_IRQ_CONNECT |
|
|
PORT_IRQ_PHYRDY |
|
|
PORT_IRQ_UNK_FIS |
|
|
PORT_IRQ_BAD_PMP,
|
|
PORT_IRQ_ERROR = PORT_IRQ_FREEZE |
|
|
PORT_IRQ_TF_ERR |
|
|
PORT_IRQ_HBUS_DATA_ERR,
|
|
DEF_PORT_IRQ = PORT_IRQ_ERROR | PORT_IRQ_SG_DONE |
|
|
PORT_IRQ_SDB_FIS | PORT_IRQ_DMAS_FIS |
|
|
PORT_IRQ_PIOS_FIS | PORT_IRQ_D2H_REG_FIS,
|
|
|
|
/* PORT_CMD bits */
|
|
PORT_CMD_ASP = (1 << 27), /* Aggressive Slumber/Partial */
|
|
PORT_CMD_ALPE = (1 << 26), /* Aggressive Link PM enable */
|
|
PORT_CMD_ATAPI = (1 << 24), /* Device is ATAPI */
|
|
PORT_CMD_PMP = (1 << 17), /* PMP attached */
|
|
PORT_CMD_LIST_ON = (1 << 15), /* cmd list DMA engine running */
|
|
PORT_CMD_FIS_ON = (1 << 14), /* FIS DMA engine running */
|
|
PORT_CMD_FIS_RX = (1 << 4), /* Enable FIS receive DMA engine */
|
|
PORT_CMD_CLO = (1 << 3), /* Command list override */
|
|
PORT_CMD_POWER_ON = (1 << 2), /* Power up device */
|
|
PORT_CMD_SPIN_UP = (1 << 1), /* Spin up device */
|
|
PORT_CMD_START = (1 << 0), /* Enable port DMA engine */
|
|
|
|
PORT_CMD_ICC_MASK = (0xf << 28), /* i/f ICC state mask */
|
|
PORT_CMD_ICC_ACTIVE = (0x1 << 28), /* Put i/f in active state */
|
|
PORT_CMD_ICC_PARTIAL = (0x2 << 28), /* Put i/f in partial state */
|
|
PORT_CMD_ICC_SLUMBER = (0x6 << 28), /* Put i/f in slumber state */
|
|
|
|
/* hpriv->flags bits */
|
|
AHCI_HFLAG_NO_NCQ = (1 << 0),
|
|
AHCI_HFLAG_IGN_IRQ_IF_ERR = (1 << 1), /* ignore IRQ_IF_ERR */
|
|
AHCI_HFLAG_IGN_SERR_INTERNAL = (1 << 2), /* ignore SERR_INTERNAL */
|
|
AHCI_HFLAG_32BIT_ONLY = (1 << 3), /* force 32bit */
|
|
AHCI_HFLAG_MV_PATA = (1 << 4), /* PATA port */
|
|
AHCI_HFLAG_NO_MSI = (1 << 5), /* no PCI MSI */
|
|
AHCI_HFLAG_NO_PMP = (1 << 6), /* no PMP */
|
|
AHCI_HFLAG_NO_HOTPLUG = (1 << 7), /* ignore PxSERR.DIAG.N */
|
|
|
|
/* ap->flags bits */
|
|
|
|
AHCI_FLAG_COMMON = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
|
|
ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA |
|
|
ATA_FLAG_ACPI_SATA | ATA_FLAG_AN |
|
|
ATA_FLAG_IPM,
|
|
AHCI_LFLAG_COMMON = ATA_LFLAG_SKIP_D2H_BSY,
|
|
|
|
ICH_MAP = 0x90, /* ICH MAP register */
|
|
};
|
|
|
|
struct ahci_cmd_hdr {
|
|
u32 opts;
|
|
u32 status;
|
|
u32 tbl_addr;
|
|
u32 tbl_addr_hi;
|
|
u32 reserved[4];
|
|
};
|
|
|
|
struct ahci_sg {
|
|
u32 addr;
|
|
u32 addr_hi;
|
|
u32 reserved;
|
|
u32 flags_size;
|
|
};
|
|
|
|
struct ahci_host_priv {
|
|
unsigned int flags; /* AHCI_HFLAG_* */
|
|
u32 cap; /* cap to use */
|
|
u32 port_map; /* port map to use */
|
|
u32 saved_cap; /* saved initial cap */
|
|
u32 saved_port_map; /* saved initial port_map */
|
|
};
|
|
|
|
struct ahci_port_priv {
|
|
struct ata_link *active_link;
|
|
struct ahci_cmd_hdr *cmd_slot;
|
|
dma_addr_t cmd_slot_dma;
|
|
void *cmd_tbl;
|
|
dma_addr_t cmd_tbl_dma;
|
|
void *rx_fis;
|
|
dma_addr_t rx_fis_dma;
|
|
/* for NCQ spurious interrupt analysis */
|
|
unsigned int ncq_saw_d2h:1;
|
|
unsigned int ncq_saw_dmas:1;
|
|
unsigned int ncq_saw_sdb:1;
|
|
u32 intr_mask; /* interrupts to enable */
|
|
};
|
|
|
|
static int ahci_scr_read(struct ata_port *ap, unsigned int sc_reg, u32 *val);
|
|
static int ahci_scr_write(struct ata_port *ap, unsigned int sc_reg, u32 val);
|
|
static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
|
|
static unsigned int ahci_qc_issue(struct ata_queued_cmd *qc);
|
|
static void ahci_irq_clear(struct ata_port *ap);
|
|
static int ahci_port_start(struct ata_port *ap);
|
|
static void ahci_port_stop(struct ata_port *ap);
|
|
static void ahci_tf_read(struct ata_port *ap, struct ata_taskfile *tf);
|
|
static void ahci_qc_prep(struct ata_queued_cmd *qc);
|
|
static u8 ahci_check_status(struct ata_port *ap);
|
|
static void ahci_freeze(struct ata_port *ap);
|
|
static void ahci_thaw(struct ata_port *ap);
|
|
static void ahci_pmp_attach(struct ata_port *ap);
|
|
static void ahci_pmp_detach(struct ata_port *ap);
|
|
static void ahci_error_handler(struct ata_port *ap);
|
|
static void ahci_vt8251_error_handler(struct ata_port *ap);
|
|
static void ahci_p5wdh_error_handler(struct ata_port *ap);
|
|
static void ahci_post_internal_cmd(struct ata_queued_cmd *qc);
|
|
static int ahci_port_resume(struct ata_port *ap);
|
|
static unsigned int ahci_fill_sg(struct ata_queued_cmd *qc, void *cmd_tbl);
|
|
static void ahci_fill_cmd_slot(struct ahci_port_priv *pp, unsigned int tag,
|
|
u32 opts);
|
|
#ifdef CONFIG_PM
|
|
static int ahci_port_suspend(struct ata_port *ap, pm_message_t mesg);
|
|
static int ahci_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg);
|
|
static int ahci_pci_device_resume(struct pci_dev *pdev);
|
|
#endif
|
|
|
|
static struct class_device_attribute *ahci_shost_attrs[] = {
|
|
&class_device_attr_link_power_management_policy,
|
|
NULL
|
|
};
|
|
|
|
static struct scsi_host_template ahci_sht = {
|
|
.module = THIS_MODULE,
|
|
.name = DRV_NAME,
|
|
.ioctl = ata_scsi_ioctl,
|
|
.queuecommand = ata_scsi_queuecmd,
|
|
.change_queue_depth = ata_scsi_change_queue_depth,
|
|
.can_queue = AHCI_MAX_CMDS - 1,
|
|
.this_id = ATA_SHT_THIS_ID,
|
|
.sg_tablesize = AHCI_MAX_SG,
|
|
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
|
|
.emulated = ATA_SHT_EMULATED,
|
|
.use_clustering = AHCI_USE_CLUSTERING,
|
|
.proc_name = DRV_NAME,
|
|
.dma_boundary = AHCI_DMA_BOUNDARY,
|
|
.slave_configure = ata_scsi_slave_config,
|
|
.slave_destroy = ata_scsi_slave_destroy,
|
|
.bios_param = ata_std_bios_param,
|
|
.shost_attrs = ahci_shost_attrs,
|
|
};
|
|
|
|
static const struct ata_port_operations ahci_ops = {
|
|
.check_status = ahci_check_status,
|
|
.check_altstatus = ahci_check_status,
|
|
.dev_select = ata_noop_dev_select,
|
|
|
|
.tf_read = ahci_tf_read,
|
|
|
|
.qc_defer = sata_pmp_qc_defer_cmd_switch,
|
|
.qc_prep = ahci_qc_prep,
|
|
.qc_issue = ahci_qc_issue,
|
|
|
|
.irq_clear = ahci_irq_clear,
|
|
|
|
.scr_read = ahci_scr_read,
|
|
.scr_write = ahci_scr_write,
|
|
|
|
.freeze = ahci_freeze,
|
|
.thaw = ahci_thaw,
|
|
|
|
.error_handler = ahci_error_handler,
|
|
.post_internal_cmd = ahci_post_internal_cmd,
|
|
|
|
.pmp_attach = ahci_pmp_attach,
|
|
.pmp_detach = ahci_pmp_detach,
|
|
|
|
#ifdef CONFIG_PM
|
|
.port_suspend = ahci_port_suspend,
|
|
.port_resume = ahci_port_resume,
|
|
#endif
|
|
.enable_pm = ahci_enable_alpm,
|
|
.disable_pm = ahci_disable_alpm,
|
|
|
|
.port_start = ahci_port_start,
|
|
.port_stop = ahci_port_stop,
|
|
};
|
|
|
|
static const struct ata_port_operations ahci_vt8251_ops = {
|
|
.check_status = ahci_check_status,
|
|
.check_altstatus = ahci_check_status,
|
|
.dev_select = ata_noop_dev_select,
|
|
|
|
.tf_read = ahci_tf_read,
|
|
|
|
.qc_defer = sata_pmp_qc_defer_cmd_switch,
|
|
.qc_prep = ahci_qc_prep,
|
|
.qc_issue = ahci_qc_issue,
|
|
|
|
.irq_clear = ahci_irq_clear,
|
|
|
|
.scr_read = ahci_scr_read,
|
|
.scr_write = ahci_scr_write,
|
|
|
|
.freeze = ahci_freeze,
|
|
.thaw = ahci_thaw,
|
|
|
|
.error_handler = ahci_vt8251_error_handler,
|
|
.post_internal_cmd = ahci_post_internal_cmd,
|
|
|
|
.pmp_attach = ahci_pmp_attach,
|
|
.pmp_detach = ahci_pmp_detach,
|
|
|
|
#ifdef CONFIG_PM
|
|
.port_suspend = ahci_port_suspend,
|
|
.port_resume = ahci_port_resume,
|
|
#endif
|
|
|
|
.port_start = ahci_port_start,
|
|
.port_stop = ahci_port_stop,
|
|
};
|
|
|
|
static const struct ata_port_operations ahci_p5wdh_ops = {
|
|
.check_status = ahci_check_status,
|
|
.check_altstatus = ahci_check_status,
|
|
.dev_select = ata_noop_dev_select,
|
|
|
|
.tf_read = ahci_tf_read,
|
|
|
|
.qc_defer = sata_pmp_qc_defer_cmd_switch,
|
|
.qc_prep = ahci_qc_prep,
|
|
.qc_issue = ahci_qc_issue,
|
|
|
|
.irq_clear = ahci_irq_clear,
|
|
|
|
.scr_read = ahci_scr_read,
|
|
.scr_write = ahci_scr_write,
|
|
|
|
.freeze = ahci_freeze,
|
|
.thaw = ahci_thaw,
|
|
|
|
.error_handler = ahci_p5wdh_error_handler,
|
|
.post_internal_cmd = ahci_post_internal_cmd,
|
|
|
|
.pmp_attach = ahci_pmp_attach,
|
|
.pmp_detach = ahci_pmp_detach,
|
|
|
|
#ifdef CONFIG_PM
|
|
.port_suspend = ahci_port_suspend,
|
|
.port_resume = ahci_port_resume,
|
|
#endif
|
|
|
|
.port_start = ahci_port_start,
|
|
.port_stop = ahci_port_stop,
|
|
};
|
|
|
|
#define AHCI_HFLAGS(flags) .private_data = (void *)(flags)
|
|
|
|
static const struct ata_port_info ahci_port_info[] = {
|
|
/* board_ahci */
|
|
{
|
|
.flags = AHCI_FLAG_COMMON,
|
|
.link_flags = AHCI_LFLAG_COMMON,
|
|
.pio_mask = 0x1f, /* pio0-4 */
|
|
.udma_mask = ATA_UDMA6,
|
|
.port_ops = &ahci_ops,
|
|
},
|
|
/* board_ahci_vt8251 */
|
|
{
|
|
AHCI_HFLAGS (AHCI_HFLAG_NO_NCQ | AHCI_HFLAG_NO_PMP),
|
|
.flags = AHCI_FLAG_COMMON,
|
|
.link_flags = AHCI_LFLAG_COMMON | ATA_LFLAG_HRST_TO_RESUME,
|
|
.pio_mask = 0x1f, /* pio0-4 */
|
|
.udma_mask = ATA_UDMA6,
|
|
.port_ops = &ahci_vt8251_ops,
|
|
},
|
|
/* board_ahci_ign_iferr */
|
|
{
|
|
AHCI_HFLAGS (AHCI_HFLAG_IGN_IRQ_IF_ERR),
|
|
.flags = AHCI_FLAG_COMMON,
|
|
.link_flags = AHCI_LFLAG_COMMON,
|
|
.pio_mask = 0x1f, /* pio0-4 */
|
|
.udma_mask = ATA_UDMA6,
|
|
.port_ops = &ahci_ops,
|
|
},
|
|
/* board_ahci_sb600 */
|
|
{
|
|
AHCI_HFLAGS (AHCI_HFLAG_IGN_SERR_INTERNAL |
|
|
AHCI_HFLAG_32BIT_ONLY | AHCI_HFLAG_NO_PMP),
|
|
.flags = AHCI_FLAG_COMMON,
|
|
.link_flags = AHCI_LFLAG_COMMON,
|
|
.pio_mask = 0x1f, /* pio0-4 */
|
|
.udma_mask = ATA_UDMA6,
|
|
.port_ops = &ahci_ops,
|
|
},
|
|
/* board_ahci_mv */
|
|
{
|
|
AHCI_HFLAGS (AHCI_HFLAG_NO_NCQ | AHCI_HFLAG_NO_MSI |
|
|
AHCI_HFLAG_MV_PATA),
|
|
.flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
|
|
ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA,
|
|
.link_flags = AHCI_LFLAG_COMMON,
|
|
.pio_mask = 0x1f, /* pio0-4 */
|
|
.udma_mask = ATA_UDMA6,
|
|
.port_ops = &ahci_ops,
|
|
},
|
|
};
|
|
|
|
static const struct pci_device_id ahci_pci_tbl[] = {
|
|
/* Intel */
|
|
{ PCI_VDEVICE(INTEL, 0x2652), board_ahci }, /* ICH6 */
|
|
{ PCI_VDEVICE(INTEL, 0x2653), board_ahci }, /* ICH6M */
|
|
{ PCI_VDEVICE(INTEL, 0x27c1), board_ahci }, /* ICH7 */
|
|
{ PCI_VDEVICE(INTEL, 0x27c5), board_ahci }, /* ICH7M */
|
|
{ PCI_VDEVICE(INTEL, 0x27c3), board_ahci }, /* ICH7R */
|
|
{ PCI_VDEVICE(AL, 0x5288), board_ahci_ign_iferr }, /* ULi M5288 */
|
|
{ PCI_VDEVICE(INTEL, 0x2681), board_ahci }, /* ESB2 */
|
|
{ PCI_VDEVICE(INTEL, 0x2682), board_ahci }, /* ESB2 */
|
|
{ PCI_VDEVICE(INTEL, 0x2683), board_ahci }, /* ESB2 */
|
|
{ PCI_VDEVICE(INTEL, 0x27c6), board_ahci }, /* ICH7-M DH */
|
|
{ PCI_VDEVICE(INTEL, 0x2821), board_ahci }, /* ICH8 */
|
|
{ PCI_VDEVICE(INTEL, 0x2822), board_ahci }, /* ICH8 */
|
|
{ PCI_VDEVICE(INTEL, 0x2824), board_ahci }, /* ICH8 */
|
|
{ PCI_VDEVICE(INTEL, 0x2829), board_ahci }, /* ICH8M */
|
|
{ PCI_VDEVICE(INTEL, 0x282a), board_ahci }, /* ICH8M */
|
|
{ PCI_VDEVICE(INTEL, 0x2922), board_ahci }, /* ICH9 */
|
|
{ PCI_VDEVICE(INTEL, 0x2923), board_ahci }, /* ICH9 */
|
|
{ PCI_VDEVICE(INTEL, 0x2924), board_ahci }, /* ICH9 */
|
|
{ PCI_VDEVICE(INTEL, 0x2925), board_ahci }, /* ICH9 */
|
|
{ PCI_VDEVICE(INTEL, 0x2927), board_ahci }, /* ICH9 */
|
|
{ PCI_VDEVICE(INTEL, 0x2929), board_ahci }, /* ICH9M */
|
|
{ PCI_VDEVICE(INTEL, 0x292a), board_ahci }, /* ICH9M */
|
|
{ PCI_VDEVICE(INTEL, 0x292b), board_ahci }, /* ICH9M */
|
|
{ PCI_VDEVICE(INTEL, 0x292c), board_ahci }, /* ICH9M */
|
|
{ PCI_VDEVICE(INTEL, 0x292f), board_ahci }, /* ICH9M */
|
|
{ PCI_VDEVICE(INTEL, 0x294d), board_ahci }, /* ICH9 */
|
|
{ PCI_VDEVICE(INTEL, 0x294e), board_ahci }, /* ICH9M */
|
|
{ PCI_VDEVICE(INTEL, 0x502a), board_ahci }, /* Tolapai */
|
|
{ PCI_VDEVICE(INTEL, 0x502b), board_ahci }, /* Tolapai */
|
|
|
|
/* JMicron 360/1/3/5/6, match class to avoid IDE function */
|
|
{ PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
|
|
PCI_CLASS_STORAGE_SATA_AHCI, 0xffffff, board_ahci_ign_iferr },
|
|
|
|
/* ATI */
|
|
{ PCI_VDEVICE(ATI, 0x4380), board_ahci_sb600 }, /* ATI SB600 */
|
|
{ PCI_VDEVICE(ATI, 0x4390), board_ahci_sb600 }, /* ATI SB700/800 */
|
|
{ PCI_VDEVICE(ATI, 0x4391), board_ahci_sb600 }, /* ATI SB700/800 */
|
|
{ PCI_VDEVICE(ATI, 0x4392), board_ahci_sb600 }, /* ATI SB700/800 */
|
|
{ PCI_VDEVICE(ATI, 0x4393), board_ahci_sb600 }, /* ATI SB700/800 */
|
|
{ PCI_VDEVICE(ATI, 0x4394), board_ahci_sb600 }, /* ATI SB700/800 */
|
|
{ PCI_VDEVICE(ATI, 0x4395), board_ahci_sb600 }, /* ATI SB700/800 */
|
|
|
|
/* VIA */
|
|
{ PCI_VDEVICE(VIA, 0x3349), board_ahci_vt8251 }, /* VIA VT8251 */
|
|
{ PCI_VDEVICE(VIA, 0x6287), board_ahci_vt8251 }, /* VIA VT8251 */
|
|
|
|
/* NVIDIA */
|
|
{ PCI_VDEVICE(NVIDIA, 0x044c), board_ahci }, /* MCP65 */
|
|
{ PCI_VDEVICE(NVIDIA, 0x044d), board_ahci }, /* MCP65 */
|
|
{ PCI_VDEVICE(NVIDIA, 0x044e), board_ahci }, /* MCP65 */
|
|
{ PCI_VDEVICE(NVIDIA, 0x044f), board_ahci }, /* MCP65 */
|
|
{ PCI_VDEVICE(NVIDIA, 0x045c), board_ahci }, /* MCP65 */
|
|
{ PCI_VDEVICE(NVIDIA, 0x045d), board_ahci }, /* MCP65 */
|
|
{ PCI_VDEVICE(NVIDIA, 0x045e), board_ahci }, /* MCP65 */
|
|
{ PCI_VDEVICE(NVIDIA, 0x045f), board_ahci }, /* MCP65 */
|
|
{ PCI_VDEVICE(NVIDIA, 0x0550), board_ahci }, /* MCP67 */
|
|
{ PCI_VDEVICE(NVIDIA, 0x0551), board_ahci }, /* MCP67 */
|
|
{ PCI_VDEVICE(NVIDIA, 0x0552), board_ahci }, /* MCP67 */
|
|
{ PCI_VDEVICE(NVIDIA, 0x0553), board_ahci }, /* MCP67 */
|
|
{ PCI_VDEVICE(NVIDIA, 0x0554), board_ahci }, /* MCP67 */
|
|
{ PCI_VDEVICE(NVIDIA, 0x0555), board_ahci }, /* MCP67 */
|
|
{ PCI_VDEVICE(NVIDIA, 0x0556), board_ahci }, /* MCP67 */
|
|
{ PCI_VDEVICE(NVIDIA, 0x0557), board_ahci }, /* MCP67 */
|
|
{ PCI_VDEVICE(NVIDIA, 0x0558), board_ahci }, /* MCP67 */
|
|
{ PCI_VDEVICE(NVIDIA, 0x0559), board_ahci }, /* MCP67 */
|
|
{ PCI_VDEVICE(NVIDIA, 0x055a), board_ahci }, /* MCP67 */
|
|
{ PCI_VDEVICE(NVIDIA, 0x055b), board_ahci }, /* MCP67 */
|
|
{ PCI_VDEVICE(NVIDIA, 0x07f0), board_ahci }, /* MCP73 */
|
|
{ PCI_VDEVICE(NVIDIA, 0x07f1), board_ahci }, /* MCP73 */
|
|
{ PCI_VDEVICE(NVIDIA, 0x07f2), board_ahci }, /* MCP73 */
|
|
{ PCI_VDEVICE(NVIDIA, 0x07f3), board_ahci }, /* MCP73 */
|
|
{ PCI_VDEVICE(NVIDIA, 0x07f4), board_ahci }, /* MCP73 */
|
|
{ PCI_VDEVICE(NVIDIA, 0x07f5), board_ahci }, /* MCP73 */
|
|
{ PCI_VDEVICE(NVIDIA, 0x07f6), board_ahci }, /* MCP73 */
|
|
{ PCI_VDEVICE(NVIDIA, 0x07f7), board_ahci }, /* MCP73 */
|
|
{ PCI_VDEVICE(NVIDIA, 0x07f8), board_ahci }, /* MCP73 */
|
|
{ PCI_VDEVICE(NVIDIA, 0x07f9), board_ahci }, /* MCP73 */
|
|
{ PCI_VDEVICE(NVIDIA, 0x07fa), board_ahci }, /* MCP73 */
|
|
{ PCI_VDEVICE(NVIDIA, 0x07fb), board_ahci }, /* MCP73 */
|
|
{ PCI_VDEVICE(NVIDIA, 0x0ad0), board_ahci }, /* MCP77 */
|
|
{ PCI_VDEVICE(NVIDIA, 0x0ad1), board_ahci }, /* MCP77 */
|
|
{ PCI_VDEVICE(NVIDIA, 0x0ad2), board_ahci }, /* MCP77 */
|
|
{ PCI_VDEVICE(NVIDIA, 0x0ad3), board_ahci }, /* MCP77 */
|
|
{ PCI_VDEVICE(NVIDIA, 0x0ad4), board_ahci }, /* MCP77 */
|
|
{ PCI_VDEVICE(NVIDIA, 0x0ad5), board_ahci }, /* MCP77 */
|
|
{ PCI_VDEVICE(NVIDIA, 0x0ad6), board_ahci }, /* MCP77 */
|
|
{ PCI_VDEVICE(NVIDIA, 0x0ad7), board_ahci }, /* MCP77 */
|
|
{ PCI_VDEVICE(NVIDIA, 0x0ad8), board_ahci }, /* MCP77 */
|
|
{ PCI_VDEVICE(NVIDIA, 0x0ad9), board_ahci }, /* MCP77 */
|
|
{ PCI_VDEVICE(NVIDIA, 0x0ada), board_ahci }, /* MCP77 */
|
|
{ PCI_VDEVICE(NVIDIA, 0x0adb), board_ahci }, /* MCP77 */
|
|
{ PCI_VDEVICE(NVIDIA, 0x0ab4), board_ahci }, /* MCP79 */
|
|
{ PCI_VDEVICE(NVIDIA, 0x0ab5), board_ahci }, /* MCP79 */
|
|
{ PCI_VDEVICE(NVIDIA, 0x0ab6), board_ahci }, /* MCP79 */
|
|
{ PCI_VDEVICE(NVIDIA, 0x0ab7), board_ahci }, /* MCP79 */
|
|
{ PCI_VDEVICE(NVIDIA, 0x0ab8), board_ahci }, /* MCP79 */
|
|
{ PCI_VDEVICE(NVIDIA, 0x0ab9), board_ahci }, /* MCP79 */
|
|
{ PCI_VDEVICE(NVIDIA, 0x0aba), board_ahci }, /* MCP79 */
|
|
{ PCI_VDEVICE(NVIDIA, 0x0abb), board_ahci }, /* MCP79 */
|
|
{ PCI_VDEVICE(NVIDIA, 0x0abc), board_ahci }, /* MCP79 */
|
|
{ PCI_VDEVICE(NVIDIA, 0x0abd), board_ahci }, /* MCP79 */
|
|
{ PCI_VDEVICE(NVIDIA, 0x0abe), board_ahci }, /* MCP79 */
|
|
{ PCI_VDEVICE(NVIDIA, 0x0abf), board_ahci }, /* MCP79 */
|
|
|
|
/* SiS */
|
|
{ PCI_VDEVICE(SI, 0x1184), board_ahci }, /* SiS 966 */
|
|
{ PCI_VDEVICE(SI, 0x1185), board_ahci }, /* SiS 966 */
|
|
{ PCI_VDEVICE(SI, 0x0186), board_ahci }, /* SiS 968 */
|
|
|
|
/* Marvell */
|
|
{ PCI_VDEVICE(MARVELL, 0x6145), board_ahci_mv }, /* 6145 */
|
|
|
|
/* Generic, PCI class code for AHCI */
|
|
{ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
|
|
PCI_CLASS_STORAGE_SATA_AHCI, 0xffffff, board_ahci },
|
|
|
|
{ } /* terminate list */
|
|
};
|
|
|
|
|
|
static struct pci_driver ahci_pci_driver = {
|
|
.name = DRV_NAME,
|
|
.id_table = ahci_pci_tbl,
|
|
.probe = ahci_init_one,
|
|
.remove = ata_pci_remove_one,
|
|
#ifdef CONFIG_PM
|
|
.suspend = ahci_pci_device_suspend,
|
|
.resume = ahci_pci_device_resume,
|
|
#endif
|
|
};
|
|
|
|
|
|
static inline int ahci_nr_ports(u32 cap)
|
|
{
|
|
return (cap & 0x1f) + 1;
|
|
}
|
|
|
|
static inline void __iomem *__ahci_port_base(struct ata_host *host,
|
|
unsigned int port_no)
|
|
{
|
|
void __iomem *mmio = host->iomap[AHCI_PCI_BAR];
|
|
|
|
return mmio + 0x100 + (port_no * 0x80);
|
|
}
|
|
|
|
static inline void __iomem *ahci_port_base(struct ata_port *ap)
|
|
{
|
|
return __ahci_port_base(ap->host, ap->port_no);
|
|
}
|
|
|
|
/**
|
|
* ahci_save_initial_config - Save and fixup initial config values
|
|
* @pdev: target PCI device
|
|
* @hpriv: host private area to store config values
|
|
*
|
|
* Some registers containing configuration info might be setup by
|
|
* BIOS and might be cleared on reset. This function saves the
|
|
* initial values of those registers into @hpriv such that they
|
|
* can be restored after controller reset.
|
|
*
|
|
* If inconsistent, config values are fixed up by this function.
|
|
*
|
|
* LOCKING:
|
|
* None.
|
|
*/
|
|
static void ahci_save_initial_config(struct pci_dev *pdev,
|
|
struct ahci_host_priv *hpriv)
|
|
{
|
|
void __iomem *mmio = pcim_iomap_table(pdev)[AHCI_PCI_BAR];
|
|
u32 cap, port_map;
|
|
int i;
|
|
|
|
/* Values prefixed with saved_ are written back to host after
|
|
* reset. Values without are used for driver operation.
|
|
*/
|
|
hpriv->saved_cap = cap = readl(mmio + HOST_CAP);
|
|
hpriv->saved_port_map = port_map = readl(mmio + HOST_PORTS_IMPL);
|
|
|
|
/* some chips have errata preventing 64bit use */
|
|
if ((cap & HOST_CAP_64) && (hpriv->flags & AHCI_HFLAG_32BIT_ONLY)) {
|
|
dev_printk(KERN_INFO, &pdev->dev,
|
|
"controller can't do 64bit DMA, forcing 32bit\n");
|
|
cap &= ~HOST_CAP_64;
|
|
}
|
|
|
|
if ((cap & HOST_CAP_NCQ) && (hpriv->flags & AHCI_HFLAG_NO_NCQ)) {
|
|
dev_printk(KERN_INFO, &pdev->dev,
|
|
"controller can't do NCQ, turning off CAP_NCQ\n");
|
|
cap &= ~HOST_CAP_NCQ;
|
|
}
|
|
|
|
if ((cap && HOST_CAP_PMP) && (hpriv->flags & AHCI_HFLAG_NO_PMP)) {
|
|
dev_printk(KERN_INFO, &pdev->dev,
|
|
"controller can't do PMP, turning off CAP_PMP\n");
|
|
cap &= ~HOST_CAP_PMP;
|
|
}
|
|
|
|
/*
|
|
* Temporary Marvell 6145 hack: PATA port presence
|
|
* is asserted through the standard AHCI port
|
|
* presence register, as bit 4 (counting from 0)
|
|
*/
|
|
if (hpriv->flags & AHCI_HFLAG_MV_PATA) {
|
|
dev_printk(KERN_ERR, &pdev->dev,
|
|
"MV_AHCI HACK: port_map %x -> %x\n",
|
|
hpriv->port_map,
|
|
hpriv->port_map & 0xf);
|
|
|
|
port_map &= 0xf;
|
|
}
|
|
|
|
/* cross check port_map and cap.n_ports */
|
|
if (port_map) {
|
|
u32 tmp_port_map = port_map;
|
|
int n_ports = ahci_nr_ports(cap);
|
|
|
|
for (i = 0; i < AHCI_MAX_PORTS && n_ports; i++) {
|
|
if (tmp_port_map & (1 << i)) {
|
|
n_ports--;
|
|
tmp_port_map &= ~(1 << i);
|
|
}
|
|
}
|
|
|
|
/* If n_ports and port_map are inconsistent, whine and
|
|
* clear port_map and let it be generated from n_ports.
|
|
*/
|
|
if (n_ports || tmp_port_map) {
|
|
dev_printk(KERN_WARNING, &pdev->dev,
|
|
"nr_ports (%u) and implemented port map "
|
|
"(0x%x) don't match, using nr_ports\n",
|
|
ahci_nr_ports(cap), port_map);
|
|
port_map = 0;
|
|
}
|
|
}
|
|
|
|
/* fabricate port_map from cap.nr_ports */
|
|
if (!port_map) {
|
|
port_map = (1 << ahci_nr_ports(cap)) - 1;
|
|
dev_printk(KERN_WARNING, &pdev->dev,
|
|
"forcing PORTS_IMPL to 0x%x\n", port_map);
|
|
|
|
/* write the fixed up value to the PI register */
|
|
hpriv->saved_port_map = port_map;
|
|
}
|
|
|
|
/* record values to use during operation */
|
|
hpriv->cap = cap;
|
|
hpriv->port_map = port_map;
|
|
}
|
|
|
|
/**
|
|
* ahci_restore_initial_config - Restore initial config
|
|
* @host: target ATA host
|
|
*
|
|
* Restore initial config stored by ahci_save_initial_config().
|
|
*
|
|
* LOCKING:
|
|
* None.
|
|
*/
|
|
static void ahci_restore_initial_config(struct ata_host *host)
|
|
{
|
|
struct ahci_host_priv *hpriv = host->private_data;
|
|
void __iomem *mmio = host->iomap[AHCI_PCI_BAR];
|
|
|
|
writel(hpriv->saved_cap, mmio + HOST_CAP);
|
|
writel(hpriv->saved_port_map, mmio + HOST_PORTS_IMPL);
|
|
(void) readl(mmio + HOST_PORTS_IMPL); /* flush */
|
|
}
|
|
|
|
static unsigned ahci_scr_offset(struct ata_port *ap, unsigned int sc_reg)
|
|
{
|
|
static const int offset[] = {
|
|
[SCR_STATUS] = PORT_SCR_STAT,
|
|
[SCR_CONTROL] = PORT_SCR_CTL,
|
|
[SCR_ERROR] = PORT_SCR_ERR,
|
|
[SCR_ACTIVE] = PORT_SCR_ACT,
|
|
[SCR_NOTIFICATION] = PORT_SCR_NTF,
|
|
};
|
|
struct ahci_host_priv *hpriv = ap->host->private_data;
|
|
|
|
if (sc_reg < ARRAY_SIZE(offset) &&
|
|
(sc_reg != SCR_NOTIFICATION || (hpriv->cap & HOST_CAP_SNTF)))
|
|
return offset[sc_reg];
|
|
return 0;
|
|
}
|
|
|
|
static int ahci_scr_read(struct ata_port *ap, unsigned int sc_reg, u32 *val)
|
|
{
|
|
void __iomem *port_mmio = ahci_port_base(ap);
|
|
int offset = ahci_scr_offset(ap, sc_reg);
|
|
|
|
if (offset) {
|
|
*val = readl(port_mmio + offset);
|
|
return 0;
|
|
}
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int ahci_scr_write(struct ata_port *ap, unsigned int sc_reg, u32 val)
|
|
{
|
|
void __iomem *port_mmio = ahci_port_base(ap);
|
|
int offset = ahci_scr_offset(ap, sc_reg);
|
|
|
|
if (offset) {
|
|
writel(val, port_mmio + offset);
|
|
return 0;
|
|
}
|
|
return -EINVAL;
|
|
}
|
|
|
|
static void ahci_start_engine(struct ata_port *ap)
|
|
{
|
|
void __iomem *port_mmio = ahci_port_base(ap);
|
|
u32 tmp;
|
|
|
|
/* start DMA */
|
|
tmp = readl(port_mmio + PORT_CMD);
|
|
tmp |= PORT_CMD_START;
|
|
writel(tmp, port_mmio + PORT_CMD);
|
|
readl(port_mmio + PORT_CMD); /* flush */
|
|
}
|
|
|
|
static int ahci_stop_engine(struct ata_port *ap)
|
|
{
|
|
void __iomem *port_mmio = ahci_port_base(ap);
|
|
u32 tmp;
|
|
|
|
tmp = readl(port_mmio + PORT_CMD);
|
|
|
|
/* check if the HBA is idle */
|
|
if ((tmp & (PORT_CMD_START | PORT_CMD_LIST_ON)) == 0)
|
|
return 0;
|
|
|
|
/* setting HBA to idle */
|
|
tmp &= ~PORT_CMD_START;
|
|
writel(tmp, port_mmio + PORT_CMD);
|
|
|
|
/* wait for engine to stop. This could be as long as 500 msec */
|
|
tmp = ata_wait_register(port_mmio + PORT_CMD,
|
|
PORT_CMD_LIST_ON, PORT_CMD_LIST_ON, 1, 500);
|
|
if (tmp & PORT_CMD_LIST_ON)
|
|
return -EIO;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void ahci_start_fis_rx(struct ata_port *ap)
|
|
{
|
|
void __iomem *port_mmio = ahci_port_base(ap);
|
|
struct ahci_host_priv *hpriv = ap->host->private_data;
|
|
struct ahci_port_priv *pp = ap->private_data;
|
|
u32 tmp;
|
|
|
|
/* set FIS registers */
|
|
if (hpriv->cap & HOST_CAP_64)
|
|
writel((pp->cmd_slot_dma >> 16) >> 16,
|
|
port_mmio + PORT_LST_ADDR_HI);
|
|
writel(pp->cmd_slot_dma & 0xffffffff, port_mmio + PORT_LST_ADDR);
|
|
|
|
if (hpriv->cap & HOST_CAP_64)
|
|
writel((pp->rx_fis_dma >> 16) >> 16,
|
|
port_mmio + PORT_FIS_ADDR_HI);
|
|
writel(pp->rx_fis_dma & 0xffffffff, port_mmio + PORT_FIS_ADDR);
|
|
|
|
/* enable FIS reception */
|
|
tmp = readl(port_mmio + PORT_CMD);
|
|
tmp |= PORT_CMD_FIS_RX;
|
|
writel(tmp, port_mmio + PORT_CMD);
|
|
|
|
/* flush */
|
|
readl(port_mmio + PORT_CMD);
|
|
}
|
|
|
|
static int ahci_stop_fis_rx(struct ata_port *ap)
|
|
{
|
|
void __iomem *port_mmio = ahci_port_base(ap);
|
|
u32 tmp;
|
|
|
|
/* disable FIS reception */
|
|
tmp = readl(port_mmio + PORT_CMD);
|
|
tmp &= ~PORT_CMD_FIS_RX;
|
|
writel(tmp, port_mmio + PORT_CMD);
|
|
|
|
/* wait for completion, spec says 500ms, give it 1000 */
|
|
tmp = ata_wait_register(port_mmio + PORT_CMD, PORT_CMD_FIS_ON,
|
|
PORT_CMD_FIS_ON, 10, 1000);
|
|
if (tmp & PORT_CMD_FIS_ON)
|
|
return -EBUSY;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void ahci_power_up(struct ata_port *ap)
|
|
{
|
|
struct ahci_host_priv *hpriv = ap->host->private_data;
|
|
void __iomem *port_mmio = ahci_port_base(ap);
|
|
u32 cmd;
|
|
|
|
cmd = readl(port_mmio + PORT_CMD) & ~PORT_CMD_ICC_MASK;
|
|
|
|
/* spin up device */
|
|
if (hpriv->cap & HOST_CAP_SSS) {
|
|
cmd |= PORT_CMD_SPIN_UP;
|
|
writel(cmd, port_mmio + PORT_CMD);
|
|
}
|
|
|
|
/* wake up link */
|
|
writel(cmd | PORT_CMD_ICC_ACTIVE, port_mmio + PORT_CMD);
|
|
}
|
|
|
|
static void ahci_disable_alpm(struct ata_port *ap)
|
|
{
|
|
struct ahci_host_priv *hpriv = ap->host->private_data;
|
|
void __iomem *port_mmio = ahci_port_base(ap);
|
|
u32 cmd;
|
|
struct ahci_port_priv *pp = ap->private_data;
|
|
|
|
/* IPM bits should be disabled by libata-core */
|
|
/* get the existing command bits */
|
|
cmd = readl(port_mmio + PORT_CMD);
|
|
|
|
/* disable ALPM and ASP */
|
|
cmd &= ~PORT_CMD_ASP;
|
|
cmd &= ~PORT_CMD_ALPE;
|
|
|
|
/* force the interface back to active */
|
|
cmd |= PORT_CMD_ICC_ACTIVE;
|
|
|
|
/* write out new cmd value */
|
|
writel(cmd, port_mmio + PORT_CMD);
|
|
cmd = readl(port_mmio + PORT_CMD);
|
|
|
|
/* wait 10ms to be sure we've come out of any low power state */
|
|
msleep(10);
|
|
|
|
/* clear out any PhyRdy stuff from interrupt status */
|
|
writel(PORT_IRQ_PHYRDY, port_mmio + PORT_IRQ_STAT);
|
|
|
|
/* go ahead and clean out PhyRdy Change from Serror too */
|
|
ahci_scr_write(ap, SCR_ERROR, ((1 << 16) | (1 << 18)));
|
|
|
|
/*
|
|
* Clear flag to indicate that we should ignore all PhyRdy
|
|
* state changes
|
|
*/
|
|
hpriv->flags &= ~AHCI_HFLAG_NO_HOTPLUG;
|
|
|
|
/*
|
|
* Enable interrupts on Phy Ready.
|
|
*/
|
|
pp->intr_mask |= PORT_IRQ_PHYRDY;
|
|
writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK);
|
|
|
|
/*
|
|
* don't change the link pm policy - we can be called
|
|
* just to turn of link pm temporarily
|
|
*/
|
|
}
|
|
|
|
static int ahci_enable_alpm(struct ata_port *ap,
|
|
enum link_pm policy)
|
|
{
|
|
struct ahci_host_priv *hpriv = ap->host->private_data;
|
|
void __iomem *port_mmio = ahci_port_base(ap);
|
|
u32 cmd;
|
|
struct ahci_port_priv *pp = ap->private_data;
|
|
u32 asp;
|
|
|
|
/* Make sure the host is capable of link power management */
|
|
if (!(hpriv->cap & HOST_CAP_ALPM))
|
|
return -EINVAL;
|
|
|
|
switch (policy) {
|
|
case MAX_PERFORMANCE:
|
|
case NOT_AVAILABLE:
|
|
/*
|
|
* if we came here with NOT_AVAILABLE,
|
|
* it just means this is the first time we
|
|
* have tried to enable - default to max performance,
|
|
* and let the user go to lower power modes on request.
|
|
*/
|
|
ahci_disable_alpm(ap);
|
|
return 0;
|
|
case MIN_POWER:
|
|
/* configure HBA to enter SLUMBER */
|
|
asp = PORT_CMD_ASP;
|
|
break;
|
|
case MEDIUM_POWER:
|
|
/* configure HBA to enter PARTIAL */
|
|
asp = 0;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
/*
|
|
* Disable interrupts on Phy Ready. This keeps us from
|
|
* getting woken up due to spurious phy ready interrupts
|
|
* TBD - Hot plug should be done via polling now, is
|
|
* that even supported?
|
|
*/
|
|
pp->intr_mask &= ~PORT_IRQ_PHYRDY;
|
|
writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK);
|
|
|
|
/*
|
|
* Set a flag to indicate that we should ignore all PhyRdy
|
|
* state changes since these can happen now whenever we
|
|
* change link state
|
|
*/
|
|
hpriv->flags |= AHCI_HFLAG_NO_HOTPLUG;
|
|
|
|
/* get the existing command bits */
|
|
cmd = readl(port_mmio + PORT_CMD);
|
|
|
|
/*
|
|
* Set ASP based on Policy
|
|
*/
|
|
cmd |= asp;
|
|
|
|
/*
|
|
* Setting this bit will instruct the HBA to aggressively
|
|
* enter a lower power link state when it's appropriate and
|
|
* based on the value set above for ASP
|
|
*/
|
|
cmd |= PORT_CMD_ALPE;
|
|
|
|
/* write out new cmd value */
|
|
writel(cmd, port_mmio + PORT_CMD);
|
|
cmd = readl(port_mmio + PORT_CMD);
|
|
|
|
/* IPM bits should be set by libata-core */
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
static void ahci_power_down(struct ata_port *ap)
|
|
{
|
|
struct ahci_host_priv *hpriv = ap->host->private_data;
|
|
void __iomem *port_mmio = ahci_port_base(ap);
|
|
u32 cmd, scontrol;
|
|
|
|
if (!(hpriv->cap & HOST_CAP_SSS))
|
|
return;
|
|
|
|
/* put device into listen mode, first set PxSCTL.DET to 0 */
|
|
scontrol = readl(port_mmio + PORT_SCR_CTL);
|
|
scontrol &= ~0xf;
|
|
writel(scontrol, port_mmio + PORT_SCR_CTL);
|
|
|
|
/* then set PxCMD.SUD to 0 */
|
|
cmd = readl(port_mmio + PORT_CMD) & ~PORT_CMD_ICC_MASK;
|
|
cmd &= ~PORT_CMD_SPIN_UP;
|
|
writel(cmd, port_mmio + PORT_CMD);
|
|
}
|
|
#endif
|
|
|
|
static void ahci_start_port(struct ata_port *ap)
|
|
{
|
|
/* enable FIS reception */
|
|
ahci_start_fis_rx(ap);
|
|
|
|
/* enable DMA */
|
|
ahci_start_engine(ap);
|
|
}
|
|
|
|
static int ahci_deinit_port(struct ata_port *ap, const char **emsg)
|
|
{
|
|
int rc;
|
|
|
|
/* disable DMA */
|
|
rc = ahci_stop_engine(ap);
|
|
if (rc) {
|
|
*emsg = "failed to stop engine";
|
|
return rc;
|
|
}
|
|
|
|
/* disable FIS reception */
|
|
rc = ahci_stop_fis_rx(ap);
|
|
if (rc) {
|
|
*emsg = "failed stop FIS RX";
|
|
return rc;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ahci_reset_controller(struct ata_host *host)
|
|
{
|
|
struct pci_dev *pdev = to_pci_dev(host->dev);
|
|
void __iomem *mmio = host->iomap[AHCI_PCI_BAR];
|
|
u32 tmp;
|
|
|
|
/* we must be in AHCI mode, before using anything
|
|
* AHCI-specific, such as HOST_RESET.
|
|
*/
|
|
tmp = readl(mmio + HOST_CTL);
|
|
if (!(tmp & HOST_AHCI_EN)) {
|
|
tmp |= HOST_AHCI_EN;
|
|
writel(tmp, mmio + HOST_CTL);
|
|
}
|
|
|
|
/* global controller reset */
|
|
if ((tmp & HOST_RESET) == 0) {
|
|
writel(tmp | HOST_RESET, mmio + HOST_CTL);
|
|
readl(mmio + HOST_CTL); /* flush */
|
|
}
|
|
|
|
/* reset must complete within 1 second, or
|
|
* the hardware should be considered fried.
|
|
*/
|
|
ssleep(1);
|
|
|
|
tmp = readl(mmio + HOST_CTL);
|
|
if (tmp & HOST_RESET) {
|
|
dev_printk(KERN_ERR, host->dev,
|
|
"controller reset failed (0x%x)\n", tmp);
|
|
return -EIO;
|
|
}
|
|
|
|
/* turn on AHCI mode */
|
|
writel(HOST_AHCI_EN, mmio + HOST_CTL);
|
|
(void) readl(mmio + HOST_CTL); /* flush */
|
|
|
|
/* some registers might be cleared on reset. restore initial values */
|
|
ahci_restore_initial_config(host);
|
|
|
|
if (pdev->vendor == PCI_VENDOR_ID_INTEL) {
|
|
u16 tmp16;
|
|
|
|
/* configure PCS */
|
|
pci_read_config_word(pdev, 0x92, &tmp16);
|
|
tmp16 |= 0xf;
|
|
pci_write_config_word(pdev, 0x92, tmp16);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void ahci_port_init(struct pci_dev *pdev, struct ata_port *ap,
|
|
int port_no, void __iomem *mmio,
|
|
void __iomem *port_mmio)
|
|
{
|
|
const char *emsg = NULL;
|
|
int rc;
|
|
u32 tmp;
|
|
|
|
/* make sure port is not active */
|
|
rc = ahci_deinit_port(ap, &emsg);
|
|
if (rc)
|
|
dev_printk(KERN_WARNING, &pdev->dev,
|
|
"%s (%d)\n", emsg, rc);
|
|
|
|
/* clear SError */
|
|
tmp = readl(port_mmio + PORT_SCR_ERR);
|
|
VPRINTK("PORT_SCR_ERR 0x%x\n", tmp);
|
|
writel(tmp, port_mmio + PORT_SCR_ERR);
|
|
|
|
/* clear port IRQ */
|
|
tmp = readl(port_mmio + PORT_IRQ_STAT);
|
|
VPRINTK("PORT_IRQ_STAT 0x%x\n", tmp);
|
|
if (tmp)
|
|
writel(tmp, port_mmio + PORT_IRQ_STAT);
|
|
|
|
writel(1 << port_no, mmio + HOST_IRQ_STAT);
|
|
}
|
|
|
|
static void ahci_init_controller(struct ata_host *host)
|
|
{
|
|
struct ahci_host_priv *hpriv = host->private_data;
|
|
struct pci_dev *pdev = to_pci_dev(host->dev);
|
|
void __iomem *mmio = host->iomap[AHCI_PCI_BAR];
|
|
int i;
|
|
void __iomem *port_mmio;
|
|
u32 tmp;
|
|
|
|
if (hpriv->flags & AHCI_HFLAG_MV_PATA) {
|
|
port_mmio = __ahci_port_base(host, 4);
|
|
|
|
writel(0, port_mmio + PORT_IRQ_MASK);
|
|
|
|
/* clear port IRQ */
|
|
tmp = readl(port_mmio + PORT_IRQ_STAT);
|
|
VPRINTK("PORT_IRQ_STAT 0x%x\n", tmp);
|
|
if (tmp)
|
|
writel(tmp, port_mmio + PORT_IRQ_STAT);
|
|
}
|
|
|
|
for (i = 0; i < host->n_ports; i++) {
|
|
struct ata_port *ap = host->ports[i];
|
|
|
|
port_mmio = ahci_port_base(ap);
|
|
if (ata_port_is_dummy(ap))
|
|
continue;
|
|
|
|
ahci_port_init(pdev, ap, i, mmio, port_mmio);
|
|
}
|
|
|
|
tmp = readl(mmio + HOST_CTL);
|
|
VPRINTK("HOST_CTL 0x%x\n", tmp);
|
|
writel(tmp | HOST_IRQ_EN, mmio + HOST_CTL);
|
|
tmp = readl(mmio + HOST_CTL);
|
|
VPRINTK("HOST_CTL 0x%x\n", tmp);
|
|
}
|
|
|
|
static unsigned int ahci_dev_classify(struct ata_port *ap)
|
|
{
|
|
void __iomem *port_mmio = ahci_port_base(ap);
|
|
struct ata_taskfile tf;
|
|
u32 tmp;
|
|
|
|
tmp = readl(port_mmio + PORT_SIG);
|
|
tf.lbah = (tmp >> 24) & 0xff;
|
|
tf.lbam = (tmp >> 16) & 0xff;
|
|
tf.lbal = (tmp >> 8) & 0xff;
|
|
tf.nsect = (tmp) & 0xff;
|
|
|
|
return ata_dev_classify(&tf);
|
|
}
|
|
|
|
static void ahci_fill_cmd_slot(struct ahci_port_priv *pp, unsigned int tag,
|
|
u32 opts)
|
|
{
|
|
dma_addr_t cmd_tbl_dma;
|
|
|
|
cmd_tbl_dma = pp->cmd_tbl_dma + tag * AHCI_CMD_TBL_SZ;
|
|
|
|
pp->cmd_slot[tag].opts = cpu_to_le32(opts);
|
|
pp->cmd_slot[tag].status = 0;
|
|
pp->cmd_slot[tag].tbl_addr = cpu_to_le32(cmd_tbl_dma & 0xffffffff);
|
|
pp->cmd_slot[tag].tbl_addr_hi = cpu_to_le32((cmd_tbl_dma >> 16) >> 16);
|
|
}
|
|
|
|
static int ahci_kick_engine(struct ata_port *ap, int force_restart)
|
|
{
|
|
void __iomem *port_mmio = ap->ioaddr.cmd_addr;
|
|
struct ahci_host_priv *hpriv = ap->host->private_data;
|
|
u32 tmp;
|
|
int busy, rc;
|
|
|
|
/* do we need to kick the port? */
|
|
busy = ahci_check_status(ap) & (ATA_BUSY | ATA_DRQ);
|
|
if (!busy && !force_restart)
|
|
return 0;
|
|
|
|
/* stop engine */
|
|
rc = ahci_stop_engine(ap);
|
|
if (rc)
|
|
goto out_restart;
|
|
|
|
/* need to do CLO? */
|
|
if (!busy) {
|
|
rc = 0;
|
|
goto out_restart;
|
|
}
|
|
|
|
if (!(hpriv->cap & HOST_CAP_CLO)) {
|
|
rc = -EOPNOTSUPP;
|
|
goto out_restart;
|
|
}
|
|
|
|
/* perform CLO */
|
|
tmp = readl(port_mmio + PORT_CMD);
|
|
tmp |= PORT_CMD_CLO;
|
|
writel(tmp, port_mmio + PORT_CMD);
|
|
|
|
rc = 0;
|
|
tmp = ata_wait_register(port_mmio + PORT_CMD,
|
|
PORT_CMD_CLO, PORT_CMD_CLO, 1, 500);
|
|
if (tmp & PORT_CMD_CLO)
|
|
rc = -EIO;
|
|
|
|
/* restart engine */
|
|
out_restart:
|
|
ahci_start_engine(ap);
|
|
return rc;
|
|
}
|
|
|
|
static int ahci_exec_polled_cmd(struct ata_port *ap, int pmp,
|
|
struct ata_taskfile *tf, int is_cmd, u16 flags,
|
|
unsigned long timeout_msec)
|
|
{
|
|
const u32 cmd_fis_len = 5; /* five dwords */
|
|
struct ahci_port_priv *pp = ap->private_data;
|
|
void __iomem *port_mmio = ahci_port_base(ap);
|
|
u8 *fis = pp->cmd_tbl;
|
|
u32 tmp;
|
|
|
|
/* prep the command */
|
|
ata_tf_to_fis(tf, pmp, is_cmd, fis);
|
|
ahci_fill_cmd_slot(pp, 0, cmd_fis_len | flags | (pmp << 12));
|
|
|
|
/* issue & wait */
|
|
writel(1, port_mmio + PORT_CMD_ISSUE);
|
|
|
|
if (timeout_msec) {
|
|
tmp = ata_wait_register(port_mmio + PORT_CMD_ISSUE, 0x1, 0x1,
|
|
1, timeout_msec);
|
|
if (tmp & 0x1) {
|
|
ahci_kick_engine(ap, 1);
|
|
return -EBUSY;
|
|
}
|
|
} else
|
|
readl(port_mmio + PORT_CMD_ISSUE); /* flush */
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ahci_do_softreset(struct ata_link *link, unsigned int *class,
|
|
int pmp, unsigned long deadline)
|
|
{
|
|
struct ata_port *ap = link->ap;
|
|
const char *reason = NULL;
|
|
unsigned long now, msecs;
|
|
struct ata_taskfile tf;
|
|
int rc;
|
|
|
|
DPRINTK("ENTER\n");
|
|
|
|
if (ata_link_offline(link)) {
|
|
DPRINTK("PHY reports no device\n");
|
|
*class = ATA_DEV_NONE;
|
|
return 0;
|
|
}
|
|
|
|
/* prepare for SRST (AHCI-1.1 10.4.1) */
|
|
rc = ahci_kick_engine(ap, 1);
|
|
if (rc && rc != -EOPNOTSUPP)
|
|
ata_link_printk(link, KERN_WARNING,
|
|
"failed to reset engine (errno=%d)\n", rc);
|
|
|
|
ata_tf_init(link->device, &tf);
|
|
|
|
/* issue the first D2H Register FIS */
|
|
msecs = 0;
|
|
now = jiffies;
|
|
if (time_after(now, deadline))
|
|
msecs = jiffies_to_msecs(deadline - now);
|
|
|
|
tf.ctl |= ATA_SRST;
|
|
if (ahci_exec_polled_cmd(ap, pmp, &tf, 0,
|
|
AHCI_CMD_RESET | AHCI_CMD_CLR_BUSY, msecs)) {
|
|
rc = -EIO;
|
|
reason = "1st FIS failed";
|
|
goto fail;
|
|
}
|
|
|
|
/* spec says at least 5us, but be generous and sleep for 1ms */
|
|
msleep(1);
|
|
|
|
/* issue the second D2H Register FIS */
|
|
tf.ctl &= ~ATA_SRST;
|
|
ahci_exec_polled_cmd(ap, pmp, &tf, 0, 0, 0);
|
|
|
|
/* wait a while before checking status */
|
|
ata_wait_after_reset(ap, deadline);
|
|
|
|
rc = ata_wait_ready(ap, deadline);
|
|
/* link occupied, -ENODEV too is an error */
|
|
if (rc) {
|
|
reason = "device not ready";
|
|
goto fail;
|
|
}
|
|
*class = ahci_dev_classify(ap);
|
|
|
|
DPRINTK("EXIT, class=%u\n", *class);
|
|
return 0;
|
|
|
|
fail:
|
|
ata_link_printk(link, KERN_ERR, "softreset failed (%s)\n", reason);
|
|
return rc;
|
|
}
|
|
|
|
static int ahci_softreset(struct ata_link *link, unsigned int *class,
|
|
unsigned long deadline)
|
|
{
|
|
int pmp = 0;
|
|
|
|
if (link->ap->flags & ATA_FLAG_PMP)
|
|
pmp = SATA_PMP_CTRL_PORT;
|
|
|
|
return ahci_do_softreset(link, class, pmp, deadline);
|
|
}
|
|
|
|
static int ahci_hardreset(struct ata_link *link, unsigned int *class,
|
|
unsigned long deadline)
|
|
{
|
|
struct ata_port *ap = link->ap;
|
|
struct ahci_port_priv *pp = ap->private_data;
|
|
u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG;
|
|
struct ata_taskfile tf;
|
|
int rc;
|
|
|
|
DPRINTK("ENTER\n");
|
|
|
|
ahci_stop_engine(ap);
|
|
|
|
/* clear D2H reception area to properly wait for D2H FIS */
|
|
ata_tf_init(link->device, &tf);
|
|
tf.command = 0x80;
|
|
ata_tf_to_fis(&tf, 0, 0, d2h_fis);
|
|
|
|
rc = sata_std_hardreset(link, class, deadline);
|
|
|
|
ahci_start_engine(ap);
|
|
|
|
if (rc == 0 && ata_link_online(link))
|
|
*class = ahci_dev_classify(ap);
|
|
if (rc != -EAGAIN && *class == ATA_DEV_UNKNOWN)
|
|
*class = ATA_DEV_NONE;
|
|
|
|
DPRINTK("EXIT, rc=%d, class=%u\n", rc, *class);
|
|
return rc;
|
|
}
|
|
|
|
static int ahci_vt8251_hardreset(struct ata_link *link, unsigned int *class,
|
|
unsigned long deadline)
|
|
{
|
|
struct ata_port *ap = link->ap;
|
|
u32 serror;
|
|
int rc;
|
|
|
|
DPRINTK("ENTER\n");
|
|
|
|
ahci_stop_engine(ap);
|
|
|
|
rc = sata_link_hardreset(link, sata_ehc_deb_timing(&link->eh_context),
|
|
deadline);
|
|
|
|
/* vt8251 needs SError cleared for the port to operate */
|
|
ahci_scr_read(ap, SCR_ERROR, &serror);
|
|
ahci_scr_write(ap, SCR_ERROR, serror);
|
|
|
|
ahci_start_engine(ap);
|
|
|
|
DPRINTK("EXIT, rc=%d, class=%u\n", rc, *class);
|
|
|
|
/* vt8251 doesn't clear BSY on signature FIS reception,
|
|
* request follow-up softreset.
|
|
*/
|
|
return rc ?: -EAGAIN;
|
|
}
|
|
|
|
static int ahci_p5wdh_hardreset(struct ata_link *link, unsigned int *class,
|
|
unsigned long deadline)
|
|
{
|
|
struct ata_port *ap = link->ap;
|
|
struct ahci_port_priv *pp = ap->private_data;
|
|
u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG;
|
|
struct ata_taskfile tf;
|
|
int rc;
|
|
|
|
ahci_stop_engine(ap);
|
|
|
|
/* clear D2H reception area to properly wait for D2H FIS */
|
|
ata_tf_init(link->device, &tf);
|
|
tf.command = 0x80;
|
|
ata_tf_to_fis(&tf, 0, 0, d2h_fis);
|
|
|
|
rc = sata_link_hardreset(link, sata_ehc_deb_timing(&link->eh_context),
|
|
deadline);
|
|
|
|
ahci_start_engine(ap);
|
|
|
|
if (rc || ata_link_offline(link))
|
|
return rc;
|
|
|
|
/* spec mandates ">= 2ms" before checking status */
|
|
msleep(150);
|
|
|
|
/* The pseudo configuration device on SIMG4726 attached to
|
|
* ASUS P5W-DH Deluxe doesn't send signature FIS after
|
|
* hardreset if no device is attached to the first downstream
|
|
* port && the pseudo device locks up on SRST w/ PMP==0. To
|
|
* work around this, wait for !BSY only briefly. If BSY isn't
|
|
* cleared, perform CLO and proceed to IDENTIFY (achieved by
|
|
* ATA_LFLAG_NO_SRST and ATA_LFLAG_ASSUME_ATA).
|
|
*
|
|
* Wait for two seconds. Devices attached to downstream port
|
|
* which can't process the following IDENTIFY after this will
|
|
* have to be reset again. For most cases, this should
|
|
* suffice while making probing snappish enough.
|
|
*/
|
|
rc = ata_wait_ready(ap, jiffies + 2 * HZ);
|
|
if (rc)
|
|
ahci_kick_engine(ap, 0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void ahci_postreset(struct ata_link *link, unsigned int *class)
|
|
{
|
|
struct ata_port *ap = link->ap;
|
|
void __iomem *port_mmio = ahci_port_base(ap);
|
|
u32 new_tmp, tmp;
|
|
|
|
ata_std_postreset(link, class);
|
|
|
|
/* Make sure port's ATAPI bit is set appropriately */
|
|
new_tmp = tmp = readl(port_mmio + PORT_CMD);
|
|
if (*class == ATA_DEV_ATAPI)
|
|
new_tmp |= PORT_CMD_ATAPI;
|
|
else
|
|
new_tmp &= ~PORT_CMD_ATAPI;
|
|
if (new_tmp != tmp) {
|
|
writel(new_tmp, port_mmio + PORT_CMD);
|
|
readl(port_mmio + PORT_CMD); /* flush */
|
|
}
|
|
}
|
|
|
|
static int ahci_pmp_softreset(struct ata_link *link, unsigned int *class,
|
|
unsigned long deadline)
|
|
{
|
|
return ahci_do_softreset(link, class, link->pmp, deadline);
|
|
}
|
|
|
|
static u8 ahci_check_status(struct ata_port *ap)
|
|
{
|
|
void __iomem *mmio = ap->ioaddr.cmd_addr;
|
|
|
|
return readl(mmio + PORT_TFDATA) & 0xFF;
|
|
}
|
|
|
|
static void ahci_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
|
|
{
|
|
struct ahci_port_priv *pp = ap->private_data;
|
|
u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG;
|
|
|
|
ata_tf_from_fis(d2h_fis, tf);
|
|
}
|
|
|
|
static unsigned int ahci_fill_sg(struct ata_queued_cmd *qc, void *cmd_tbl)
|
|
{
|
|
struct scatterlist *sg;
|
|
struct ahci_sg *ahci_sg;
|
|
unsigned int n_sg = 0;
|
|
|
|
VPRINTK("ENTER\n");
|
|
|
|
/*
|
|
* Next, the S/G list.
|
|
*/
|
|
ahci_sg = cmd_tbl + AHCI_CMD_TBL_HDR_SZ;
|
|
ata_for_each_sg(sg, qc) {
|
|
dma_addr_t addr = sg_dma_address(sg);
|
|
u32 sg_len = sg_dma_len(sg);
|
|
|
|
ahci_sg->addr = cpu_to_le32(addr & 0xffffffff);
|
|
ahci_sg->addr_hi = cpu_to_le32((addr >> 16) >> 16);
|
|
ahci_sg->flags_size = cpu_to_le32(sg_len - 1);
|
|
|
|
ahci_sg++;
|
|
n_sg++;
|
|
}
|
|
|
|
return n_sg;
|
|
}
|
|
|
|
static void ahci_qc_prep(struct ata_queued_cmd *qc)
|
|
{
|
|
struct ata_port *ap = qc->ap;
|
|
struct ahci_port_priv *pp = ap->private_data;
|
|
int is_atapi = is_atapi_taskfile(&qc->tf);
|
|
void *cmd_tbl;
|
|
u32 opts;
|
|
const u32 cmd_fis_len = 5; /* five dwords */
|
|
unsigned int n_elem;
|
|
|
|
/*
|
|
* Fill in command table information. First, the header,
|
|
* a SATA Register - Host to Device command FIS.
|
|
*/
|
|
cmd_tbl = pp->cmd_tbl + qc->tag * AHCI_CMD_TBL_SZ;
|
|
|
|
ata_tf_to_fis(&qc->tf, qc->dev->link->pmp, 1, cmd_tbl);
|
|
if (is_atapi) {
|
|
memset(cmd_tbl + AHCI_CMD_TBL_CDB, 0, 32);
|
|
memcpy(cmd_tbl + AHCI_CMD_TBL_CDB, qc->cdb, qc->dev->cdb_len);
|
|
}
|
|
|
|
n_elem = 0;
|
|
if (qc->flags & ATA_QCFLAG_DMAMAP)
|
|
n_elem = ahci_fill_sg(qc, cmd_tbl);
|
|
|
|
/*
|
|
* Fill in command slot information.
|
|
*/
|
|
opts = cmd_fis_len | n_elem << 16 | (qc->dev->link->pmp << 12);
|
|
if (qc->tf.flags & ATA_TFLAG_WRITE)
|
|
opts |= AHCI_CMD_WRITE;
|
|
if (is_atapi)
|
|
opts |= AHCI_CMD_ATAPI | AHCI_CMD_PREFETCH;
|
|
|
|
ahci_fill_cmd_slot(pp, qc->tag, opts);
|
|
}
|
|
|
|
static void ahci_error_intr(struct ata_port *ap, u32 irq_stat)
|
|
{
|
|
struct ahci_host_priv *hpriv = ap->host->private_data;
|
|
struct ahci_port_priv *pp = ap->private_data;
|
|
struct ata_eh_info *host_ehi = &ap->link.eh_info;
|
|
struct ata_link *link = NULL;
|
|
struct ata_queued_cmd *active_qc;
|
|
struct ata_eh_info *active_ehi;
|
|
u32 serror;
|
|
|
|
/* determine active link */
|
|
ata_port_for_each_link(link, ap)
|
|
if (ata_link_active(link))
|
|
break;
|
|
if (!link)
|
|
link = &ap->link;
|
|
|
|
active_qc = ata_qc_from_tag(ap, link->active_tag);
|
|
active_ehi = &link->eh_info;
|
|
|
|
/* record irq stat */
|
|
ata_ehi_clear_desc(host_ehi);
|
|
ata_ehi_push_desc(host_ehi, "irq_stat 0x%08x", irq_stat);
|
|
|
|
/* AHCI needs SError cleared; otherwise, it might lock up */
|
|
ahci_scr_read(ap, SCR_ERROR, &serror);
|
|
ahci_scr_write(ap, SCR_ERROR, serror);
|
|
host_ehi->serror |= serror;
|
|
|
|
/* some controllers set IRQ_IF_ERR on device errors, ignore it */
|
|
if (hpriv->flags & AHCI_HFLAG_IGN_IRQ_IF_ERR)
|
|
irq_stat &= ~PORT_IRQ_IF_ERR;
|
|
|
|
if (irq_stat & PORT_IRQ_TF_ERR) {
|
|
/* If qc is active, charge it; otherwise, the active
|
|
* link. There's no active qc on NCQ errors. It will
|
|
* be determined by EH by reading log page 10h.
|
|
*/
|
|
if (active_qc)
|
|
active_qc->err_mask |= AC_ERR_DEV;
|
|
else
|
|
active_ehi->err_mask |= AC_ERR_DEV;
|
|
|
|
if (hpriv->flags & AHCI_HFLAG_IGN_SERR_INTERNAL)
|
|
host_ehi->serror &= ~SERR_INTERNAL;
|
|
}
|
|
|
|
if (irq_stat & PORT_IRQ_UNK_FIS) {
|
|
u32 *unk = (u32 *)(pp->rx_fis + RX_FIS_UNK);
|
|
|
|
active_ehi->err_mask |= AC_ERR_HSM;
|
|
active_ehi->action |= ATA_EH_SOFTRESET;
|
|
ata_ehi_push_desc(active_ehi,
|
|
"unknown FIS %08x %08x %08x %08x" ,
|
|
unk[0], unk[1], unk[2], unk[3]);
|
|
}
|
|
|
|
if (ap->nr_pmp_links && (irq_stat & PORT_IRQ_BAD_PMP)) {
|
|
active_ehi->err_mask |= AC_ERR_HSM;
|
|
active_ehi->action |= ATA_EH_SOFTRESET;
|
|
ata_ehi_push_desc(active_ehi, "incorrect PMP");
|
|
}
|
|
|
|
if (irq_stat & (PORT_IRQ_HBUS_ERR | PORT_IRQ_HBUS_DATA_ERR)) {
|
|
host_ehi->err_mask |= AC_ERR_HOST_BUS;
|
|
host_ehi->action |= ATA_EH_SOFTRESET;
|
|
ata_ehi_push_desc(host_ehi, "host bus error");
|
|
}
|
|
|
|
if (irq_stat & PORT_IRQ_IF_ERR) {
|
|
host_ehi->err_mask |= AC_ERR_ATA_BUS;
|
|
host_ehi->action |= ATA_EH_SOFTRESET;
|
|
ata_ehi_push_desc(host_ehi, "interface fatal error");
|
|
}
|
|
|
|
if (irq_stat & (PORT_IRQ_CONNECT | PORT_IRQ_PHYRDY)) {
|
|
ata_ehi_hotplugged(host_ehi);
|
|
ata_ehi_push_desc(host_ehi, "%s",
|
|
irq_stat & PORT_IRQ_CONNECT ?
|
|
"connection status changed" : "PHY RDY changed");
|
|
}
|
|
|
|
/* okay, let's hand over to EH */
|
|
|
|
if (irq_stat & PORT_IRQ_FREEZE)
|
|
ata_port_freeze(ap);
|
|
else
|
|
ata_port_abort(ap);
|
|
}
|
|
|
|
static void ahci_port_intr(struct ata_port *ap)
|
|
{
|
|
void __iomem *port_mmio = ap->ioaddr.cmd_addr;
|
|
struct ata_eh_info *ehi = &ap->link.eh_info;
|
|
struct ahci_port_priv *pp = ap->private_data;
|
|
struct ahci_host_priv *hpriv = ap->host->private_data;
|
|
int resetting = !!(ap->pflags & ATA_PFLAG_RESETTING);
|
|
u32 status, qc_active;
|
|
int rc;
|
|
|
|
status = readl(port_mmio + PORT_IRQ_STAT);
|
|
writel(status, port_mmio + PORT_IRQ_STAT);
|
|
|
|
/* ignore BAD_PMP while resetting */
|
|
if (unlikely(resetting))
|
|
status &= ~PORT_IRQ_BAD_PMP;
|
|
|
|
/* If we are getting PhyRdy, this is
|
|
* just a power state change, we should
|
|
* clear out this, plus the PhyRdy/Comm
|
|
* Wake bits from Serror
|
|
*/
|
|
if ((hpriv->flags & AHCI_HFLAG_NO_HOTPLUG) &&
|
|
(status & PORT_IRQ_PHYRDY)) {
|
|
status &= ~PORT_IRQ_PHYRDY;
|
|
ahci_scr_write(ap, SCR_ERROR, ((1 << 16) | (1 << 18)));
|
|
}
|
|
|
|
if (unlikely(status & PORT_IRQ_ERROR)) {
|
|
ahci_error_intr(ap, status);
|
|
return;
|
|
}
|
|
|
|
if (status & PORT_IRQ_SDB_FIS) {
|
|
/* If SNotification is available, leave notification
|
|
* handling to sata_async_notification(). If not,
|
|
* emulate it by snooping SDB FIS RX area.
|
|
*
|
|
* Snooping FIS RX area is probably cheaper than
|
|
* poking SNotification but some constrollers which
|
|
* implement SNotification, ICH9 for example, don't
|
|
* store AN SDB FIS into receive area.
|
|
*/
|
|
if (hpriv->cap & HOST_CAP_SNTF)
|
|
sata_async_notification(ap);
|
|
else {
|
|
/* If the 'N' bit in word 0 of the FIS is set,
|
|
* we just received asynchronous notification.
|
|
* Tell libata about it.
|
|
*/
|
|
const __le32 *f = pp->rx_fis + RX_FIS_SDB;
|
|
u32 f0 = le32_to_cpu(f[0]);
|
|
|
|
if (f0 & (1 << 15))
|
|
sata_async_notification(ap);
|
|
}
|
|
}
|
|
|
|
/* pp->active_link is valid iff any command is in flight */
|
|
if (ap->qc_active && pp->active_link->sactive)
|
|
qc_active = readl(port_mmio + PORT_SCR_ACT);
|
|
else
|
|
qc_active = readl(port_mmio + PORT_CMD_ISSUE);
|
|
|
|
rc = ata_qc_complete_multiple(ap, qc_active, NULL);
|
|
|
|
/* while resetting, invalid completions are expected */
|
|
if (unlikely(rc < 0 && !resetting)) {
|
|
ehi->err_mask |= AC_ERR_HSM;
|
|
ehi->action |= ATA_EH_SOFTRESET;
|
|
ata_port_freeze(ap);
|
|
}
|
|
}
|
|
|
|
static void ahci_irq_clear(struct ata_port *ap)
|
|
{
|
|
/* TODO */
|
|
}
|
|
|
|
static irqreturn_t ahci_interrupt(int irq, void *dev_instance)
|
|
{
|
|
struct ata_host *host = dev_instance;
|
|
struct ahci_host_priv *hpriv;
|
|
unsigned int i, handled = 0;
|
|
void __iomem *mmio;
|
|
u32 irq_stat, irq_ack = 0;
|
|
|
|
VPRINTK("ENTER\n");
|
|
|
|
hpriv = host->private_data;
|
|
mmio = host->iomap[AHCI_PCI_BAR];
|
|
|
|
/* sigh. 0xffffffff is a valid return from h/w */
|
|
irq_stat = readl(mmio + HOST_IRQ_STAT);
|
|
irq_stat &= hpriv->port_map;
|
|
if (!irq_stat)
|
|
return IRQ_NONE;
|
|
|
|
spin_lock(&host->lock);
|
|
|
|
for (i = 0; i < host->n_ports; i++) {
|
|
struct ata_port *ap;
|
|
|
|
if (!(irq_stat & (1 << i)))
|
|
continue;
|
|
|
|
ap = host->ports[i];
|
|
if (ap) {
|
|
ahci_port_intr(ap);
|
|
VPRINTK("port %u\n", i);
|
|
} else {
|
|
VPRINTK("port %u (no irq)\n", i);
|
|
if (ata_ratelimit())
|
|
dev_printk(KERN_WARNING, host->dev,
|
|
"interrupt on disabled port %u\n", i);
|
|
}
|
|
|
|
irq_ack |= (1 << i);
|
|
}
|
|
|
|
if (irq_ack) {
|
|
writel(irq_ack, mmio + HOST_IRQ_STAT);
|
|
handled = 1;
|
|
}
|
|
|
|
spin_unlock(&host->lock);
|
|
|
|
VPRINTK("EXIT\n");
|
|
|
|
return IRQ_RETVAL(handled);
|
|
}
|
|
|
|
static unsigned int ahci_qc_issue(struct ata_queued_cmd *qc)
|
|
{
|
|
struct ata_port *ap = qc->ap;
|
|
void __iomem *port_mmio = ahci_port_base(ap);
|
|
struct ahci_port_priv *pp = ap->private_data;
|
|
|
|
/* Keep track of the currently active link. It will be used
|
|
* in completion path to determine whether NCQ phase is in
|
|
* progress.
|
|
*/
|
|
pp->active_link = qc->dev->link;
|
|
|
|
if (qc->tf.protocol == ATA_PROT_NCQ)
|
|
writel(1 << qc->tag, port_mmio + PORT_SCR_ACT);
|
|
writel(1 << qc->tag, port_mmio + PORT_CMD_ISSUE);
|
|
readl(port_mmio + PORT_CMD_ISSUE); /* flush */
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void ahci_freeze(struct ata_port *ap)
|
|
{
|
|
void __iomem *port_mmio = ahci_port_base(ap);
|
|
|
|
/* turn IRQ off */
|
|
writel(0, port_mmio + PORT_IRQ_MASK);
|
|
}
|
|
|
|
static void ahci_thaw(struct ata_port *ap)
|
|
{
|
|
void __iomem *mmio = ap->host->iomap[AHCI_PCI_BAR];
|
|
void __iomem *port_mmio = ahci_port_base(ap);
|
|
u32 tmp;
|
|
struct ahci_port_priv *pp = ap->private_data;
|
|
|
|
/* clear IRQ */
|
|
tmp = readl(port_mmio + PORT_IRQ_STAT);
|
|
writel(tmp, port_mmio + PORT_IRQ_STAT);
|
|
writel(1 << ap->port_no, mmio + HOST_IRQ_STAT);
|
|
|
|
/* turn IRQ back on */
|
|
writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK);
|
|
}
|
|
|
|
static void ahci_error_handler(struct ata_port *ap)
|
|
{
|
|
if (!(ap->pflags & ATA_PFLAG_FROZEN)) {
|
|
/* restart engine */
|
|
ahci_stop_engine(ap);
|
|
ahci_start_engine(ap);
|
|
}
|
|
|
|
/* perform recovery */
|
|
sata_pmp_do_eh(ap, ata_std_prereset, ahci_softreset,
|
|
ahci_hardreset, ahci_postreset,
|
|
sata_pmp_std_prereset, ahci_pmp_softreset,
|
|
sata_pmp_std_hardreset, sata_pmp_std_postreset);
|
|
}
|
|
|
|
static void ahci_vt8251_error_handler(struct ata_port *ap)
|
|
{
|
|
if (!(ap->pflags & ATA_PFLAG_FROZEN)) {
|
|
/* restart engine */
|
|
ahci_stop_engine(ap);
|
|
ahci_start_engine(ap);
|
|
}
|
|
|
|
/* perform recovery */
|
|
ata_do_eh(ap, ata_std_prereset, ahci_softreset, ahci_vt8251_hardreset,
|
|
ahci_postreset);
|
|
}
|
|
|
|
static void ahci_p5wdh_error_handler(struct ata_port *ap)
|
|
{
|
|
if (!(ap->pflags & ATA_PFLAG_FROZEN)) {
|
|
/* restart engine */
|
|
ahci_stop_engine(ap);
|
|
ahci_start_engine(ap);
|
|
}
|
|
|
|
/* perform recovery */
|
|
ata_do_eh(ap, ata_std_prereset, ahci_softreset, ahci_p5wdh_hardreset,
|
|
ahci_postreset);
|
|
}
|
|
|
|
static void ahci_post_internal_cmd(struct ata_queued_cmd *qc)
|
|
{
|
|
struct ata_port *ap = qc->ap;
|
|
|
|
/* make DMA engine forget about the failed command */
|
|
if (qc->flags & ATA_QCFLAG_FAILED)
|
|
ahci_kick_engine(ap, 1);
|
|
}
|
|
|
|
static void ahci_pmp_attach(struct ata_port *ap)
|
|
{
|
|
void __iomem *port_mmio = ahci_port_base(ap);
|
|
struct ahci_port_priv *pp = ap->private_data;
|
|
u32 cmd;
|
|
|
|
cmd = readl(port_mmio + PORT_CMD);
|
|
cmd |= PORT_CMD_PMP;
|
|
writel(cmd, port_mmio + PORT_CMD);
|
|
|
|
pp->intr_mask |= PORT_IRQ_BAD_PMP;
|
|
writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK);
|
|
}
|
|
|
|
static void ahci_pmp_detach(struct ata_port *ap)
|
|
{
|
|
void __iomem *port_mmio = ahci_port_base(ap);
|
|
struct ahci_port_priv *pp = ap->private_data;
|
|
u32 cmd;
|
|
|
|
cmd = readl(port_mmio + PORT_CMD);
|
|
cmd &= ~PORT_CMD_PMP;
|
|
writel(cmd, port_mmio + PORT_CMD);
|
|
|
|
pp->intr_mask &= ~PORT_IRQ_BAD_PMP;
|
|
writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK);
|
|
}
|
|
|
|
static int ahci_port_resume(struct ata_port *ap)
|
|
{
|
|
ahci_power_up(ap);
|
|
ahci_start_port(ap);
|
|
|
|
if (ap->nr_pmp_links)
|
|
ahci_pmp_attach(ap);
|
|
else
|
|
ahci_pmp_detach(ap);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
static int ahci_port_suspend(struct ata_port *ap, pm_message_t mesg)
|
|
{
|
|
const char *emsg = NULL;
|
|
int rc;
|
|
|
|
rc = ahci_deinit_port(ap, &emsg);
|
|
if (rc == 0)
|
|
ahci_power_down(ap);
|
|
else {
|
|
ata_port_printk(ap, KERN_ERR, "%s (%d)\n", emsg, rc);
|
|
ahci_start_port(ap);
|
|
}
|
|
|
|
return rc;
|
|
}
|
|
|
|
static int ahci_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg)
|
|
{
|
|
struct ata_host *host = dev_get_drvdata(&pdev->dev);
|
|
void __iomem *mmio = host->iomap[AHCI_PCI_BAR];
|
|
u32 ctl;
|
|
|
|
if (mesg.event == PM_EVENT_SUSPEND) {
|
|
/* AHCI spec rev1.1 section 8.3.3:
|
|
* Software must disable interrupts prior to requesting a
|
|
* transition of the HBA to D3 state.
|
|
*/
|
|
ctl = readl(mmio + HOST_CTL);
|
|
ctl &= ~HOST_IRQ_EN;
|
|
writel(ctl, mmio + HOST_CTL);
|
|
readl(mmio + HOST_CTL); /* flush */
|
|
}
|
|
|
|
return ata_pci_device_suspend(pdev, mesg);
|
|
}
|
|
|
|
static int ahci_pci_device_resume(struct pci_dev *pdev)
|
|
{
|
|
struct ata_host *host = dev_get_drvdata(&pdev->dev);
|
|
int rc;
|
|
|
|
rc = ata_pci_device_do_resume(pdev);
|
|
if (rc)
|
|
return rc;
|
|
|
|
if (pdev->dev.power.power_state.event == PM_EVENT_SUSPEND) {
|
|
rc = ahci_reset_controller(host);
|
|
if (rc)
|
|
return rc;
|
|
|
|
ahci_init_controller(host);
|
|
}
|
|
|
|
ata_host_resume(host);
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static int ahci_port_start(struct ata_port *ap)
|
|
{
|
|
struct device *dev = ap->host->dev;
|
|
struct ahci_port_priv *pp;
|
|
void *mem;
|
|
dma_addr_t mem_dma;
|
|
int rc;
|
|
|
|
pp = devm_kzalloc(dev, sizeof(*pp), GFP_KERNEL);
|
|
if (!pp)
|
|
return -ENOMEM;
|
|
|
|
rc = ata_pad_alloc(ap, dev);
|
|
if (rc)
|
|
return rc;
|
|
|
|
mem = dmam_alloc_coherent(dev, AHCI_PORT_PRIV_DMA_SZ, &mem_dma,
|
|
GFP_KERNEL);
|
|
if (!mem)
|
|
return -ENOMEM;
|
|
memset(mem, 0, AHCI_PORT_PRIV_DMA_SZ);
|
|
|
|
/*
|
|
* First item in chunk of DMA memory: 32-slot command table,
|
|
* 32 bytes each in size
|
|
*/
|
|
pp->cmd_slot = mem;
|
|
pp->cmd_slot_dma = mem_dma;
|
|
|
|
mem += AHCI_CMD_SLOT_SZ;
|
|
mem_dma += AHCI_CMD_SLOT_SZ;
|
|
|
|
/*
|
|
* Second item: Received-FIS area
|
|
*/
|
|
pp->rx_fis = mem;
|
|
pp->rx_fis_dma = mem_dma;
|
|
|
|
mem += AHCI_RX_FIS_SZ;
|
|
mem_dma += AHCI_RX_FIS_SZ;
|
|
|
|
/*
|
|
* Third item: data area for storing a single command
|
|
* and its scatter-gather table
|
|
*/
|
|
pp->cmd_tbl = mem;
|
|
pp->cmd_tbl_dma = mem_dma;
|
|
|
|
/*
|
|
* Save off initial list of interrupts to be enabled.
|
|
* This could be changed later
|
|
*/
|
|
pp->intr_mask = DEF_PORT_IRQ;
|
|
|
|
ap->private_data = pp;
|
|
|
|
/* engage engines, captain */
|
|
return ahci_port_resume(ap);
|
|
}
|
|
|
|
static void ahci_port_stop(struct ata_port *ap)
|
|
{
|
|
const char *emsg = NULL;
|
|
int rc;
|
|
|
|
/* de-initialize port */
|
|
rc = ahci_deinit_port(ap, &emsg);
|
|
if (rc)
|
|
ata_port_printk(ap, KERN_WARNING, "%s (%d)\n", emsg, rc);
|
|
}
|
|
|
|
static int ahci_configure_dma_masks(struct pci_dev *pdev, int using_dac)
|
|
{
|
|
int rc;
|
|
|
|
if (using_dac &&
|
|
!pci_set_dma_mask(pdev, DMA_64BIT_MASK)) {
|
|
rc = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK);
|
|
if (rc) {
|
|
rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
|
|
if (rc) {
|
|
dev_printk(KERN_ERR, &pdev->dev,
|
|
"64-bit DMA enable failed\n");
|
|
return rc;
|
|
}
|
|
}
|
|
} else {
|
|
rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
|
|
if (rc) {
|
|
dev_printk(KERN_ERR, &pdev->dev,
|
|
"32-bit DMA enable failed\n");
|
|
return rc;
|
|
}
|
|
rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
|
|
if (rc) {
|
|
dev_printk(KERN_ERR, &pdev->dev,
|
|
"32-bit consistent DMA enable failed\n");
|
|
return rc;
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static void ahci_print_info(struct ata_host *host)
|
|
{
|
|
struct ahci_host_priv *hpriv = host->private_data;
|
|
struct pci_dev *pdev = to_pci_dev(host->dev);
|
|
void __iomem *mmio = host->iomap[AHCI_PCI_BAR];
|
|
u32 vers, cap, impl, speed;
|
|
const char *speed_s;
|
|
u16 cc;
|
|
const char *scc_s;
|
|
|
|
vers = readl(mmio + HOST_VERSION);
|
|
cap = hpriv->cap;
|
|
impl = hpriv->port_map;
|
|
|
|
speed = (cap >> 20) & 0xf;
|
|
if (speed == 1)
|
|
speed_s = "1.5";
|
|
else if (speed == 2)
|
|
speed_s = "3";
|
|
else
|
|
speed_s = "?";
|
|
|
|
pci_read_config_word(pdev, 0x0a, &cc);
|
|
if (cc == PCI_CLASS_STORAGE_IDE)
|
|
scc_s = "IDE";
|
|
else if (cc == PCI_CLASS_STORAGE_SATA)
|
|
scc_s = "SATA";
|
|
else if (cc == PCI_CLASS_STORAGE_RAID)
|
|
scc_s = "RAID";
|
|
else
|
|
scc_s = "unknown";
|
|
|
|
dev_printk(KERN_INFO, &pdev->dev,
|
|
"AHCI %02x%02x.%02x%02x "
|
|
"%u slots %u ports %s Gbps 0x%x impl %s mode\n"
|
|
,
|
|
|
|
(vers >> 24) & 0xff,
|
|
(vers >> 16) & 0xff,
|
|
(vers >> 8) & 0xff,
|
|
vers & 0xff,
|
|
|
|
((cap >> 8) & 0x1f) + 1,
|
|
(cap & 0x1f) + 1,
|
|
speed_s,
|
|
impl,
|
|
scc_s);
|
|
|
|
dev_printk(KERN_INFO, &pdev->dev,
|
|
"flags: "
|
|
"%s%s%s%s%s%s%s"
|
|
"%s%s%s%s%s%s%s\n"
|
|
,
|
|
|
|
cap & (1 << 31) ? "64bit " : "",
|
|
cap & (1 << 30) ? "ncq " : "",
|
|
cap & (1 << 29) ? "sntf " : "",
|
|
cap & (1 << 28) ? "ilck " : "",
|
|
cap & (1 << 27) ? "stag " : "",
|
|
cap & (1 << 26) ? "pm " : "",
|
|
cap & (1 << 25) ? "led " : "",
|
|
|
|
cap & (1 << 24) ? "clo " : "",
|
|
cap & (1 << 19) ? "nz " : "",
|
|
cap & (1 << 18) ? "only " : "",
|
|
cap & (1 << 17) ? "pmp " : "",
|
|
cap & (1 << 15) ? "pio " : "",
|
|
cap & (1 << 14) ? "slum " : "",
|
|
cap & (1 << 13) ? "part " : ""
|
|
);
|
|
}
|
|
|
|
/* On ASUS P5W DH Deluxe, the second port of PCI device 00:1f.2 is
|
|
* hardwired to on-board SIMG 4726. The chipset is ICH8 and doesn't
|
|
* support PMP and the 4726 either directly exports the device
|
|
* attached to the first downstream port or acts as a hardware storage
|
|
* controller and emulate a single ATA device (can be RAID 0/1 or some
|
|
* other configuration).
|
|
*
|
|
* When there's no device attached to the first downstream port of the
|
|
* 4726, "Config Disk" appears, which is a pseudo ATA device to
|
|
* configure the 4726. However, ATA emulation of the device is very
|
|
* lame. It doesn't send signature D2H Reg FIS after the initial
|
|
* hardreset, pukes on SRST w/ PMP==0 and has bunch of other issues.
|
|
*
|
|
* The following function works around the problem by always using
|
|
* hardreset on the port and not depending on receiving signature FIS
|
|
* afterward. If signature FIS isn't received soon, ATA class is
|
|
* assumed without follow-up softreset.
|
|
*/
|
|
static void ahci_p5wdh_workaround(struct ata_host *host)
|
|
{
|
|
static struct dmi_system_id sysids[] = {
|
|
{
|
|
.ident = "P5W DH Deluxe",
|
|
.matches = {
|
|
DMI_MATCH(DMI_SYS_VENDOR,
|
|
"ASUSTEK COMPUTER INC"),
|
|
DMI_MATCH(DMI_PRODUCT_NAME, "P5W DH Deluxe"),
|
|
},
|
|
},
|
|
{ }
|
|
};
|
|
struct pci_dev *pdev = to_pci_dev(host->dev);
|
|
|
|
if (pdev->bus->number == 0 && pdev->devfn == PCI_DEVFN(0x1f, 2) &&
|
|
dmi_check_system(sysids)) {
|
|
struct ata_port *ap = host->ports[1];
|
|
|
|
dev_printk(KERN_INFO, &pdev->dev, "enabling ASUS P5W DH "
|
|
"Deluxe on-board SIMG4726 workaround\n");
|
|
|
|
ap->ops = &ahci_p5wdh_ops;
|
|
ap->link.flags |= ATA_LFLAG_NO_SRST | ATA_LFLAG_ASSUME_ATA;
|
|
}
|
|
}
|
|
|
|
static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
|
|
{
|
|
static int printed_version;
|
|
struct ata_port_info pi = ahci_port_info[ent->driver_data];
|
|
const struct ata_port_info *ppi[] = { &pi, NULL };
|
|
struct device *dev = &pdev->dev;
|
|
struct ahci_host_priv *hpriv;
|
|
struct ata_host *host;
|
|
int i, rc;
|
|
|
|
VPRINTK("ENTER\n");
|
|
|
|
WARN_ON(ATA_MAX_QUEUE > AHCI_MAX_CMDS);
|
|
|
|
if (!printed_version++)
|
|
dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
|
|
|
|
/* acquire resources */
|
|
rc = pcim_enable_device(pdev);
|
|
if (rc)
|
|
return rc;
|
|
|
|
rc = pcim_iomap_regions(pdev, 1 << AHCI_PCI_BAR, DRV_NAME);
|
|
if (rc == -EBUSY)
|
|
pcim_pin_device(pdev);
|
|
if (rc)
|
|
return rc;
|
|
|
|
if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
|
|
(pdev->device == 0x2652 || pdev->device == 0x2653)) {
|
|
u8 map;
|
|
|
|
/* ICH6s share the same PCI ID for both piix and ahci
|
|
* modes. Enabling ahci mode while MAP indicates
|
|
* combined mode is a bad idea. Yield to ata_piix.
|
|
*/
|
|
pci_read_config_byte(pdev, ICH_MAP, &map);
|
|
if (map & 0x3) {
|
|
dev_printk(KERN_INFO, &pdev->dev, "controller is in "
|
|
"combined mode, can't enable AHCI mode\n");
|
|
return -ENODEV;
|
|
}
|
|
}
|
|
|
|
hpriv = devm_kzalloc(dev, sizeof(*hpriv), GFP_KERNEL);
|
|
if (!hpriv)
|
|
return -ENOMEM;
|
|
hpriv->flags |= (unsigned long)pi.private_data;
|
|
|
|
if ((hpriv->flags & AHCI_HFLAG_NO_MSI) || pci_enable_msi(pdev))
|
|
pci_intx(pdev, 1);
|
|
|
|
/* save initial config */
|
|
ahci_save_initial_config(pdev, hpriv);
|
|
|
|
/* prepare host */
|
|
if (hpriv->cap & HOST_CAP_NCQ)
|
|
pi.flags |= ATA_FLAG_NCQ;
|
|
|
|
if (hpriv->cap & HOST_CAP_PMP)
|
|
pi.flags |= ATA_FLAG_PMP;
|
|
|
|
host = ata_host_alloc_pinfo(&pdev->dev, ppi, fls(hpriv->port_map));
|
|
if (!host)
|
|
return -ENOMEM;
|
|
host->iomap = pcim_iomap_table(pdev);
|
|
host->private_data = hpriv;
|
|
|
|
for (i = 0; i < host->n_ports; i++) {
|
|
struct ata_port *ap = host->ports[i];
|
|
void __iomem *port_mmio = ahci_port_base(ap);
|
|
|
|
ata_port_pbar_desc(ap, AHCI_PCI_BAR, -1, "abar");
|
|
ata_port_pbar_desc(ap, AHCI_PCI_BAR,
|
|
0x100 + ap->port_no * 0x80, "port");
|
|
|
|
/* set initial link pm policy */
|
|
ap->pm_policy = NOT_AVAILABLE;
|
|
|
|
/* standard SATA port setup */
|
|
if (hpriv->port_map & (1 << i))
|
|
ap->ioaddr.cmd_addr = port_mmio;
|
|
|
|
/* disabled/not-implemented port */
|
|
else
|
|
ap->ops = &ata_dummy_port_ops;
|
|
}
|
|
|
|
/* apply workaround for ASUS P5W DH Deluxe mainboard */
|
|
ahci_p5wdh_workaround(host);
|
|
|
|
/* initialize adapter */
|
|
rc = ahci_configure_dma_masks(pdev, hpriv->cap & HOST_CAP_64);
|
|
if (rc)
|
|
return rc;
|
|
|
|
rc = ahci_reset_controller(host);
|
|
if (rc)
|
|
return rc;
|
|
|
|
ahci_init_controller(host);
|
|
ahci_print_info(host);
|
|
|
|
pci_set_master(pdev);
|
|
return ata_host_activate(host, pdev->irq, ahci_interrupt, IRQF_SHARED,
|
|
&ahci_sht);
|
|
}
|
|
|
|
static int __init ahci_init(void)
|
|
{
|
|
return pci_register_driver(&ahci_pci_driver);
|
|
}
|
|
|
|
static void __exit ahci_exit(void)
|
|
{
|
|
pci_unregister_driver(&ahci_pci_driver);
|
|
}
|
|
|
|
|
|
MODULE_AUTHOR("Jeff Garzik");
|
|
MODULE_DESCRIPTION("AHCI SATA low-level driver");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_DEVICE_TABLE(pci, ahci_pci_tbl);
|
|
MODULE_VERSION(DRV_VERSION);
|
|
|
|
module_init(ahci_init);
|
|
module_exit(ahci_exit);
|