linux/arch/arm64/Kconfig.platforms
Linus Torvalds dd65b96492 ARM: new SoC support for 6.0
This adds initial support for two SoC families that have been under
 review for a while. In both cases, the origonal idea was to have a
 minimally functional version, but we ended up leaving out the clk drivers
 that are still under review and will be merged through the corresponding
 subsystem tree.
 
 The Nuvoton NPCM8xx is a 64-bit Baseboard Management Controller and
 based on the 32-bit NPCM7xx family but is now getting added to
 arch/arm64 as well.
 
 Sunplus SP7021, also known as Plus1, is a general-purpose
 System-in-Package design based on the 32-bit Cortex-A7 SoC
 on the main chip, plus an I/O chip and memory in the same
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmLo+24ACgkQmmx57+YA
 GNkPVw//XAC/uK7WR4oz1D1YaPPNhEvFa6hV1gjGB7Iif72SzyDJmC+36MATU/AY
 neQjCOLJMhxI0hpDGY9nLYe+aP1C6vD32zsjffjt/+s9em+YZZCUkRJuQ5xO3fID
 Uk8ZAnCIcOqX9sjXr9ChW8irlcWFbKzhgWXnPqwQmycIaE7QVz1wx32dbc64YuAK
 S+290U8wbj8bukr33TyZPMdYlfqNU3c1W+dCaeVsQlX1juoHEV3stmIjslRefd6X
 Jre22YJE41VlPufZej76nHXuVnjKf54Oi347TcbPOWNDtEAIESt3mzKy+zICBT2p
 v01rNBf0SogyOtSbWDPTFCAH9W9hujSOJIUOWpbOLaPdfElXxcoTBwj2e2LMoW0k
 ke7YR1m6FKDam5GFU9Oe98CWIiVm/GnTA5mnhhETU1QTXQ3KeZ+Z8X779YuSWPv9
 kJuOPRSk9NdcfRtxZz1vpCvhv/2hBbeBuz+GZi3bisMWdvVqS3lFqVbr6kziQbJZ
 kE6KJH48FdL0VLVvuy+aNSF2umLT42b+5+cmQFuP2zePQgo1DEMKEtFXpZjQJbha
 3iu3sHnieOFMLcbNzbqSz2im3yYNBjl1M5qoGEXaw3Rkzqiht0kMNvAa4LmAejbh
 E+5BIczwWNbaUKgToV1ij65O4a78Bw98m2SIS7awEZC5MW/nXYA=
 =7Id+
 -----END PGP SIGNATURE-----

Merge tag 'arm-newsoc-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM new SoC support from Arnd Bergmann:
 "This adds initial support for two SoC families that have been under
  review for a while. In both cases, the origonal idea was to have a
  minimally functional version, but we ended up leaving out the clk
  drivers that are still under review and will be merged through the
  corresponding subsystem tree.

  The Nuvoton NPCM8xx is a 64-bit Baseboard Management Controller and
  based on the 32-bit NPCM7xx family but is now getting added to
  arch/arm64 as well.

  Sunplus SP7021, also known as Plus1, is a general-purpose
  System-in-Package design based on the 32-bit Cortex-A7 SoC on the main
  chip, plus an I/O chip and memory in the same"

* tag 'arm-newsoc-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (25 commits)
  MAINTAINERS: rectify entry for ARM/NUVOTON NPCM ARCHITECTURE
  arm64: defconfig: Add Nuvoton NPCM family support
  arm64: dts: nuvoton: Add initial NPCM845 EVB device tree
  arm64: dts: nuvoton: Add initial NPCM8XX device tree
  arm64: npcm: Add support for Nuvoton NPCM8XX BMC SoC
  dt-bindings: arm: npcm: Add nuvoton,npcm845 GCR compatible string
  dt-bindings: arm: npcm: Add nuvoton,npcm845 compatible string
  dt-bindings: arm: npcm: Add maintainer
  reset: npcm: Add NPCM8XX support
  dt-bindings: reset: npcm: Add support for NPCM8XX
  reset: npcm: using syscon instead of device data
  ARM: dts: nuvoton: add reset syscon property
  dt-bindings: reset: npcm: add GCR syscon property
  dt-binding: clk: npcm845: Add binding for Nuvoton NPCM8XX Clock
  dt-bindings: watchdog: npcm: Add npcm845 compatible string
  dt-bindings: timer: npcm: Add npcm845 compatible string
  ARM: dts: Add Sunplus SP7021-Demo-V3 board device tree
  ARM: sp7021_defconfig: Add Sunplus SP7021 defconfig
  ARM: sunplus: Add initial support for Sunplus SP7021 SoC
  irqchip: Add Sunplus SP7021 interrupt controller driver
  ...
2022-08-02 08:29:18 -07:00

353 lines
8.4 KiB
Plaintext

# SPDX-License-Identifier: GPL-2.0-only
menu "Platform selection"
config ARCH_ACTIONS
bool "Actions Semi Platforms"
select OWL_TIMER
select PINCTRL
help
This enables support for the Actions Semiconductor S900 SoC family.
config ARCH_SUNXI
bool "Allwinner sunxi 64-bit SoC Family"
select ARCH_HAS_RESET_CONTROLLER
select PINCTRL
select RESET_CONTROLLER
select SUN4I_TIMER
select SUN6I_R_INTC
select SUNXI_NMI_INTC
help
This enables support for Allwinner sunxi based SoCs like the A64.
config ARCH_ALPINE
bool "Annapurna Labs Alpine platform"
select ALPINE_MSI if PCI
help
This enables support for the Annapurna Labs Alpine
Soc family.
config ARCH_APPLE
bool "Apple Silicon SoC family"
select APPLE_AIC
help
This enables support for Apple's in-house ARM SoC family, starting
with the Apple M1.
config ARCH_BCM2835
bool "Broadcom BCM2835 family"
select TIMER_OF
select GPIOLIB
select MFD_CORE
select PINCTRL
select PINCTRL_BCM2835
select ARM_AMBA
select ARM_GIC
select ARM_TIMER_SP804
help
This enables support for the Broadcom BCM2837 and BCM2711 SoC.
These SoCs are used in the Raspberry Pi 3 and 4 devices.
config ARCH_BCM4908
bool "Broadcom BCM4908 family"
select ARCH_BCMBCA
select GPIOLIB
help
This enables support for the Broadcom BCM4906, BCM4908 and
BCM49408 SoCs. These SoCs use Brahma-B53 cores and can be
found in home routers.
config ARCH_BCM_IPROC
bool "Broadcom iProc SoC Family"
select COMMON_CLK_IPROC
select GPIOLIB
select PINCTRL
help
This enables support for Broadcom iProc based SoCs
config ARCH_BCMBCA
bool "Broadcom Broadband Carrier Access (BCA) origin SoC"
help
Say Y if you intend to run the kernel on a Broadcom Broadband ARM-based
BCA chipset.
This enables support for Broadcom BCA ARM-based broadband chipsets,
including the DSL, PON and Wireless family of chips.
config ARCH_BERLIN
bool "Marvell Berlin SoC Family"
select DW_APB_ICTL
select DW_APB_TIMER_OF
select GPIOLIB
select PINCTRL
help
This enables support for Marvell Berlin SoC Family
config ARCH_BITMAIN
bool "Bitmain SoC Platforms"
help
This enables support for the Bitmain SoC Family.
config ARCH_BRCMSTB
bool "Broadcom Set-Top-Box SoCs"
select ARCH_HAS_RESET_CONTROLLER
select GENERIC_IRQ_CHIP
select PINCTRL
help
This enables support for Broadcom's ARMv8 Set Top Box SoCs
config ARCH_EXYNOS
bool "ARMv8 based Samsung Exynos SoC family"
select COMMON_CLK_SAMSUNG
select CLKSRC_EXYNOS_MCT
select EXYNOS_PM_DOMAINS if PM_GENERIC_DOMAINS
select EXYNOS_PMU
select PINCTRL
select PINCTRL_EXYNOS
select PM_GENERIC_DOMAINS if PM
select SOC_SAMSUNG
help
This enables support for ARMv8 based Samsung Exynos SoC family.
config ARCH_SPARX5
bool "ARMv8 based Microchip Sparx5 SoC family"
select PINCTRL
select DW_APB_TIMER_OF
help
This enables support for the Microchip Sparx5 ARMv8-based
SoC family of TSN-capable gigabit switches.
The SparX-5 Ethernet switch family provides a rich set of
switching features such as advanced TCAM-based VLAN and QoS
processing enabling delivery of differentiated services, and
security through TCAM-based frame processing using versatile
content aware processor (VCAP).
config ARCH_K3
bool "Texas Instruments Inc. K3 multicore SoC architecture"
select PM_GENERIC_DOMAINS if PM
select MAILBOX
select SOC_TI
select TI_MESSAGE_MANAGER
select TI_SCI_PROTOCOL
select TI_SCI_INTR_IRQCHIP
select TI_SCI_INTA_IRQCHIP
select TI_K3_SOCINFO
help
This enables support for Texas Instruments' K3 multicore SoC
architecture.
config ARCH_LAYERSCAPE
bool "ARMv8 based Freescale Layerscape SoC family"
select EDAC_SUPPORT
help
This enables support for the Freescale Layerscape SoC family.
config ARCH_LG1K
bool "LG Electronics LG1K SoC Family"
help
This enables support for LG Electronics LG1K SoC Family
config ARCH_HISI
bool "Hisilicon SoC Family"
select ARM_TIMER_SP804
select HISILICON_IRQ_MBIGEN if PCI
select PINCTRL
help
This enables support for Hisilicon ARMv8 SoC family
config ARCH_KEEMBAY
bool "Keem Bay SoC"
help
This enables support for Intel Movidius SoC code-named Keem Bay.
config ARCH_MEDIATEK
bool "MediaTek SoC Family"
select ARM_GIC
select PINCTRL
select MTK_TIMER
help
This enables support for MediaTek MT27xx, MT65xx, MT76xx
& MT81xx ARMv8 SoCs
config ARCH_MESON
bool "Amlogic Platforms"
help
This enables support for the arm64 based Amlogic SoCs
such as the s905, S905X/D, S912, A113X/D or S905X/D2
config ARCH_MVEBU
bool "Marvell EBU SoC Family"
select ARMADA_AP806_SYSCON
select ARMADA_CP110_SYSCON
select ARMADA_37XX_CLK
select GPIOLIB
select GPIOLIB_IRQCHIP
select MVEBU_GICP
select MVEBU_ICU
select MVEBU_ODMI
select MVEBU_PIC
select MVEBU_SEI
select OF_GPIO
select PINCTRL
select PINCTRL_ARMADA_37XX
select PINCTRL_ARMADA_AP806
select PINCTRL_ARMADA_CP110
select PINCTRL_AC5
help
This enables support for Marvell EBU familly, including:
- Armada 3700 SoC Family
- Armada 7K SoC Family
- Armada 8K SoC Family
- 98DX2530 SoC Family
config ARCH_MXC
bool "ARMv8 based NXP i.MX SoC family"
select ARM64_ERRATUM_843419
select ARM64_ERRATUM_845719 if COMPAT
select IMX_GPCV2
select IMX_GPCV2_PM_DOMAINS
select PM
select PM_GENERIC_DOMAINS
select SOC_BUS
select TIMER_IMX_SYS_CTR
help
This enables support for the ARMv8 based SoCs in the
NXP i.MX family.
config ARCH_NPCM
bool "Nuvoton NPCM Architecture"
select PINCTRL
select GPIOLIB
select NPCM7XX_TIMER
select RESET_CONTROLLER
select MFD_SYSCON
help
General support for NPCM8xx BMC (Arbel).
Nuvoton NPCM8xx BMC based on the Cortex A35.
config ARCH_QCOM
bool "Qualcomm Platforms"
select GPIOLIB
select PINCTRL
help
This enables support for the ARMv8 based Qualcomm chipsets.
config ARCH_REALTEK
bool "Realtek Platforms"
select RESET_CONTROLLER
help
This enables support for the ARMv8 based Realtek chipsets,
like the RTD1295.
config ARCH_RENESAS
bool "Renesas SoC Platforms"
select GPIOLIB
select PINCTRL
select SOC_BUS
help
This enables support for the ARMv8 based Renesas SoCs.
config ARCH_ROCKCHIP
bool "Rockchip Platforms"
select ARCH_HAS_RESET_CONTROLLER
select PINCTRL
select PM
select ROCKCHIP_TIMER
help
This enables support for the ARMv8 based Rockchip chipsets,
like the RK3368.
config ARCH_S32
bool "NXP S32 SoC Family"
help
This enables support for the NXP S32 family of processors.
config ARCH_SEATTLE
bool "AMD Seattle SoC Family"
help
This enables support for AMD Seattle SOC Family
config ARCH_INTEL_SOCFPGA
bool "Intel's SoCFPGA ARMv8 Families"
help
This enables support for Intel's SoCFPGA ARMv8 families:
Stratix 10 (ex. Altera), Stratix10 Software Virtual Platform,
Agilex and eASIC N5X.
config ARCH_SYNQUACER
bool "Socionext SynQuacer SoC Family"
select IRQ_FASTEOI_HIERARCHY_HANDLERS
config ARCH_TEGRA
bool "NVIDIA Tegra SoC Family"
select ARCH_HAS_RESET_CONTROLLER
select ARM_GIC_PM
select CLKSRC_MMIO
select TIMER_OF
select GPIOLIB
select PINCTRL
select PM
select PM_GENERIC_DOMAINS
select RESET_CONTROLLER
help
This enables support for the NVIDIA Tegra SoC family.
config ARCH_TESLA_FSD
bool "ARMv8 based Tesla platform"
depends on ARCH_EXYNOS
help
Support for ARMv8 based Tesla platforms.
config ARCH_SPRD
bool "Spreadtrum SoC platform"
help
Support for Spreadtrum ARM based SoCs
config ARCH_THUNDER
bool "Cavium Inc. Thunder SoC Family"
help
This enables support for Cavium's Thunder Family of SoCs.
config ARCH_THUNDER2
bool "Cavium ThunderX2 Server Processors"
select GPIOLIB
help
This enables support for Cavium's ThunderX2 CN99XX family of
server processors.
config ARCH_UNIPHIER
bool "Socionext UniPhier SoC Family"
select ARCH_HAS_RESET_CONTROLLER
select PINCTRL
select RESET_CONTROLLER
help
This enables support for Socionext UniPhier SoC family.
config ARCH_VEXPRESS
bool "ARMv8 software model (Versatile Express)"
select GPIOLIB
select PM
select PM_GENERIC_DOMAINS
help
This enables support for the ARMv8 software model (Versatile
Express).
config ARCH_VISCONTI
bool "Toshiba Visconti SoC Family"
select PINCTRL
select PINCTRL_VISCONTI
help
This enables support for Toshiba Visconti SoCs Family.
config ARCH_XGENE
bool "AppliedMicro X-Gene SOC Family"
help
This enables support for AppliedMicro X-Gene SOC Family
config ARCH_ZYNQMP
bool "Xilinx ZynqMP Family"
help
This enables support for Xilinx ZynqMP Family
endmenu # "Platform selection"