mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-17 16:14:25 +08:00
e5b9c05772
New drivers: * si7005 relative humidity and temperature sensor * Lite-on ltr501 ambient light and proximity sensor Cleanups * Clean up some dead comments in max1363 * Drop some obsolete variables in adjd_s311 and tcs3472 left over from the introduction of iio_push_to_buffers_with_timestamp. * Drop some unneeded linux/init.h includes * Squish a sparse warning in mpl3115 by correctly specifying a be32 variable. * A number of cleanups and fixes for sca3000 * Drop an unneed checks in mxs-lradc, ad7303 and adis16400. * Drop a platform_set_drvdata in viperboard after the only use of it was removed during a devm conversion. * Add a missing device name for ak8975 to comply with the ABI. * Put mpu6050 into the IMU menu as it slipped out into the main menu. * Fix a typo and some comment formatting in mpu6050. * Document at91 ADC clock properties. -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.22 (GNU/Linux) iQIcBAABAgAGBQJS+R3TAAoJEFSFNJnE9BaILtoP/RiZaeAQe5hKVtS7DBNmtbvH NVrk4SDl8F5WH6O6MKvRn54aBWyPj3axyMb0WLv9oGQycxlflT/420Q1UaayG4oX W1IOS/X2JNrWpt/xlNPi8crqpcRZbLVjKoRGhw0BMR9OTD+x6U+NTNGpr9WJUNAB CjmYpa6MhouQMd59+HMroSf1PIvBfvG2fkAMg2AoRSQ6TU19q5Yi0zzqwS17iZf3 VTazh63dVKYyt3MJimjnGcA4A2kv5YOrfK59qYfHPIVR4AfKNVKlwVQlu8TlBaXE eYr2G1Jbd/GRkUe5FRGL9Nlnl8exnUU8JGCTpeXSJSmDWAe2xVkjTNbDDyrT5Gem 6c02ms0xYeIxqzYpZVZs8OueuZhs2DztcT0e+p7ByvjBZ+XvMEp9t00DnsV3rSEa Y9X1vpeZei5bRW+woKCniEhV/89seUe1ASyj/g8yiPYc5b1mKhcUQKFs1vCToWjV v0MEp15569jeqX+6igOAloArxykrdmS4hAeMfyKoijApd97n5hkK2jwjFxRv9rZs 2Q+2qTDA/3E9+wRjLrx4v+Bu6EKH44K5Z5H5rPmnsgRe8/0UQx4xvhI6Bv2Krx0v CKdwNAo6Z5iePAtmaMU46l9h1AygOAzub9V2L36Irxd4BFLLYUj1zSW2hN1zgfCX 4YTgPtTGZ/lBfNsvBy9b =nSiE -----END PGP SIGNATURE----- Merge tag 'iio-for-3.15a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: First set of new drivers and cleanups for IIO in the 3.15 cycle. New drivers: * si7005 relative humidity and temperature sensor * Lite-on ltr501 ambient light and proximity sensor Cleanups * Clean up some dead comments in max1363 * Drop some obsolete variables in adjd_s311 and tcs3472 left over from the introduction of iio_push_to_buffers_with_timestamp. * Drop some unneeded linux/init.h includes * Squish a sparse warning in mpl3115 by correctly specifying a be32 variable. * A number of cleanups and fixes for sca3000 * Drop an unneed checks in mxs-lradc, ad7303 and adis16400. * Drop a platform_set_drvdata in viperboard after the only use of it was removed during a devm conversion. * Add a missing device name for ak8975 to comply with the ABI. * Put mpu6050 into the IMU menu as it slipped out into the main menu. * Fix a typo and some comment formatting in mpu6050. * Document at91 ADC clock properties.
560 lines
14 KiB
C
560 lines
14 KiB
C
/*
|
|
* TI ADC MFD driver
|
|
*
|
|
* Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation version 2.
|
|
*
|
|
* This program is distributed "as is" WITHOUT ANY WARRANTY of any
|
|
* kind, whether express or implied; without even the implied warranty
|
|
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/err.h>
|
|
#include <linux/module.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/io.h>
|
|
#include <linux/iio/iio.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/iio/machine.h>
|
|
#include <linux/iio/driver.h>
|
|
|
|
#include <linux/mfd/ti_am335x_tscadc.h>
|
|
#include <linux/iio/buffer.h>
|
|
#include <linux/iio/kfifo_buf.h>
|
|
|
|
struct tiadc_device {
|
|
struct ti_tscadc_dev *mfd_tscadc;
|
|
int channels;
|
|
u8 channel_line[8];
|
|
u8 channel_step[8];
|
|
int buffer_en_ch_steps;
|
|
u16 data[8];
|
|
};
|
|
|
|
static unsigned int tiadc_readl(struct tiadc_device *adc, unsigned int reg)
|
|
{
|
|
return readl(adc->mfd_tscadc->tscadc_base + reg);
|
|
}
|
|
|
|
static void tiadc_writel(struct tiadc_device *adc, unsigned int reg,
|
|
unsigned int val)
|
|
{
|
|
writel(val, adc->mfd_tscadc->tscadc_base + reg);
|
|
}
|
|
|
|
static u32 get_adc_step_mask(struct tiadc_device *adc_dev)
|
|
{
|
|
u32 step_en;
|
|
|
|
step_en = ((1 << adc_dev->channels) - 1);
|
|
step_en <<= TOTAL_STEPS - adc_dev->channels + 1;
|
|
return step_en;
|
|
}
|
|
|
|
static u32 get_adc_chan_step_mask(struct tiadc_device *adc_dev,
|
|
struct iio_chan_spec const *chan)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(adc_dev->channel_step); i++) {
|
|
if (chan->channel == adc_dev->channel_line[i]) {
|
|
u32 step;
|
|
|
|
step = adc_dev->channel_step[i];
|
|
/* +1 for the charger */
|
|
return 1 << (step + 1);
|
|
}
|
|
}
|
|
WARN_ON(1);
|
|
return 0;
|
|
}
|
|
|
|
static u32 get_adc_step_bit(struct tiadc_device *adc_dev, int chan)
|
|
{
|
|
return 1 << adc_dev->channel_step[chan];
|
|
}
|
|
|
|
static void tiadc_step_config(struct iio_dev *indio_dev)
|
|
{
|
|
struct tiadc_device *adc_dev = iio_priv(indio_dev);
|
|
unsigned int stepconfig;
|
|
int i, steps;
|
|
|
|
/*
|
|
* There are 16 configurable steps and 8 analog input
|
|
* lines available which are shared between Touchscreen and ADC.
|
|
*
|
|
* Steps backwards i.e. from 16 towards 0 are used by ADC
|
|
* depending on number of input lines needed.
|
|
* Channel would represent which analog input
|
|
* needs to be given to ADC to digitalize data.
|
|
*/
|
|
|
|
steps = TOTAL_STEPS - adc_dev->channels;
|
|
if (iio_buffer_enabled(indio_dev))
|
|
stepconfig = STEPCONFIG_AVG_16 | STEPCONFIG_FIFO1
|
|
| STEPCONFIG_MODE_SWCNT;
|
|
else
|
|
stepconfig = STEPCONFIG_AVG_16 | STEPCONFIG_FIFO1;
|
|
|
|
for (i = 0; i < adc_dev->channels; i++) {
|
|
int chan;
|
|
|
|
chan = adc_dev->channel_line[i];
|
|
tiadc_writel(adc_dev, REG_STEPCONFIG(steps),
|
|
stepconfig | STEPCONFIG_INP(chan));
|
|
tiadc_writel(adc_dev, REG_STEPDELAY(steps),
|
|
STEPCONFIG_OPENDLY);
|
|
adc_dev->channel_step[i] = steps;
|
|
steps++;
|
|
}
|
|
}
|
|
|
|
static irqreturn_t tiadc_irq_h(int irq, void *private)
|
|
{
|
|
struct iio_dev *indio_dev = private;
|
|
struct tiadc_device *adc_dev = iio_priv(indio_dev);
|
|
unsigned int status, config;
|
|
status = tiadc_readl(adc_dev, REG_IRQSTATUS);
|
|
|
|
/*
|
|
* ADC and touchscreen share the IRQ line.
|
|
* FIFO0 interrupts are used by TSC. Handle FIFO1 IRQs here only
|
|
*/
|
|
if (status & IRQENB_FIFO1OVRRUN) {
|
|
/* FIFO Overrun. Clear flag. Disable/Enable ADC to recover */
|
|
config = tiadc_readl(adc_dev, REG_CTRL);
|
|
config &= ~(CNTRLREG_TSCSSENB);
|
|
tiadc_writel(adc_dev, REG_CTRL, config);
|
|
tiadc_writel(adc_dev, REG_IRQSTATUS, IRQENB_FIFO1OVRRUN
|
|
| IRQENB_FIFO1UNDRFLW | IRQENB_FIFO1THRES);
|
|
tiadc_writel(adc_dev, REG_CTRL, (config | CNTRLREG_TSCSSENB));
|
|
return IRQ_HANDLED;
|
|
} else if (status & IRQENB_FIFO1THRES) {
|
|
/* Disable irq and wake worker thread */
|
|
tiadc_writel(adc_dev, REG_IRQCLR, IRQENB_FIFO1THRES);
|
|
return IRQ_WAKE_THREAD;
|
|
}
|
|
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
static irqreturn_t tiadc_worker_h(int irq, void *private)
|
|
{
|
|
struct iio_dev *indio_dev = private;
|
|
struct tiadc_device *adc_dev = iio_priv(indio_dev);
|
|
int i, k, fifo1count, read;
|
|
u16 *data = adc_dev->data;
|
|
|
|
fifo1count = tiadc_readl(adc_dev, REG_FIFO1CNT);
|
|
for (k = 0; k < fifo1count; k = k + i) {
|
|
for (i = 0; i < (indio_dev->scan_bytes)/2; i++) {
|
|
read = tiadc_readl(adc_dev, REG_FIFO1);
|
|
data[i] = read & FIFOREAD_DATA_MASK;
|
|
}
|
|
iio_push_to_buffers(indio_dev, (u8 *) data);
|
|
}
|
|
|
|
tiadc_writel(adc_dev, REG_IRQSTATUS, IRQENB_FIFO1THRES);
|
|
tiadc_writel(adc_dev, REG_IRQENABLE, IRQENB_FIFO1THRES);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int tiadc_buffer_preenable(struct iio_dev *indio_dev)
|
|
{
|
|
struct tiadc_device *adc_dev = iio_priv(indio_dev);
|
|
int i, fifo1count, read;
|
|
|
|
tiadc_writel(adc_dev, REG_IRQCLR, (IRQENB_FIFO1THRES |
|
|
IRQENB_FIFO1OVRRUN |
|
|
IRQENB_FIFO1UNDRFLW));
|
|
|
|
/* Flush FIFO. Needed in corner cases in simultaneous tsc/adc use */
|
|
fifo1count = tiadc_readl(adc_dev, REG_FIFO1CNT);
|
|
for (i = 0; i < fifo1count; i++)
|
|
read = tiadc_readl(adc_dev, REG_FIFO1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tiadc_buffer_postenable(struct iio_dev *indio_dev)
|
|
{
|
|
struct tiadc_device *adc_dev = iio_priv(indio_dev);
|
|
struct iio_buffer *buffer = indio_dev->buffer;
|
|
unsigned int enb = 0;
|
|
u8 bit;
|
|
|
|
tiadc_step_config(indio_dev);
|
|
for_each_set_bit(bit, buffer->scan_mask, adc_dev->channels)
|
|
enb |= (get_adc_step_bit(adc_dev, bit) << 1);
|
|
adc_dev->buffer_en_ch_steps = enb;
|
|
|
|
am335x_tsc_se_set_cache(adc_dev->mfd_tscadc, enb);
|
|
|
|
tiadc_writel(adc_dev, REG_IRQSTATUS, IRQENB_FIFO1THRES
|
|
| IRQENB_FIFO1OVRRUN | IRQENB_FIFO1UNDRFLW);
|
|
tiadc_writel(adc_dev, REG_IRQENABLE, IRQENB_FIFO1THRES
|
|
| IRQENB_FIFO1OVRRUN);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tiadc_buffer_predisable(struct iio_dev *indio_dev)
|
|
{
|
|
struct tiadc_device *adc_dev = iio_priv(indio_dev);
|
|
int fifo1count, i, read;
|
|
|
|
tiadc_writel(adc_dev, REG_IRQCLR, (IRQENB_FIFO1THRES |
|
|
IRQENB_FIFO1OVRRUN | IRQENB_FIFO1UNDRFLW));
|
|
am335x_tsc_se_clr(adc_dev->mfd_tscadc, adc_dev->buffer_en_ch_steps);
|
|
adc_dev->buffer_en_ch_steps = 0;
|
|
|
|
/* Flush FIFO of leftover data in the time it takes to disable adc */
|
|
fifo1count = tiadc_readl(adc_dev, REG_FIFO1CNT);
|
|
for (i = 0; i < fifo1count; i++)
|
|
read = tiadc_readl(adc_dev, REG_FIFO1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tiadc_buffer_postdisable(struct iio_dev *indio_dev)
|
|
{
|
|
tiadc_step_config(indio_dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct iio_buffer_setup_ops tiadc_buffer_setup_ops = {
|
|
.preenable = &tiadc_buffer_preenable,
|
|
.postenable = &tiadc_buffer_postenable,
|
|
.predisable = &tiadc_buffer_predisable,
|
|
.postdisable = &tiadc_buffer_postdisable,
|
|
};
|
|
|
|
static int tiadc_iio_buffered_hardware_setup(struct iio_dev *indio_dev,
|
|
irqreturn_t (*pollfunc_bh)(int irq, void *p),
|
|
irqreturn_t (*pollfunc_th)(int irq, void *p),
|
|
int irq,
|
|
unsigned long flags,
|
|
const struct iio_buffer_setup_ops *setup_ops)
|
|
{
|
|
struct iio_buffer *buffer;
|
|
int ret;
|
|
|
|
buffer = iio_kfifo_allocate(indio_dev);
|
|
if (!buffer)
|
|
return -ENOMEM;
|
|
|
|
iio_device_attach_buffer(indio_dev, buffer);
|
|
|
|
ret = request_threaded_irq(irq, pollfunc_th, pollfunc_bh,
|
|
flags, indio_dev->name, indio_dev);
|
|
if (ret)
|
|
goto error_kfifo_free;
|
|
|
|
indio_dev->setup_ops = setup_ops;
|
|
indio_dev->modes |= INDIO_BUFFER_HARDWARE;
|
|
|
|
ret = iio_buffer_register(indio_dev,
|
|
indio_dev->channels,
|
|
indio_dev->num_channels);
|
|
if (ret)
|
|
goto error_free_irq;
|
|
|
|
return 0;
|
|
|
|
error_free_irq:
|
|
free_irq(irq, indio_dev);
|
|
error_kfifo_free:
|
|
iio_kfifo_free(indio_dev->buffer);
|
|
return ret;
|
|
}
|
|
|
|
static void tiadc_iio_buffered_hardware_remove(struct iio_dev *indio_dev)
|
|
{
|
|
struct tiadc_device *adc_dev = iio_priv(indio_dev);
|
|
|
|
free_irq(adc_dev->mfd_tscadc->irq, indio_dev);
|
|
iio_kfifo_free(indio_dev->buffer);
|
|
iio_buffer_unregister(indio_dev);
|
|
}
|
|
|
|
|
|
static const char * const chan_name_ain[] = {
|
|
"AIN0",
|
|
"AIN1",
|
|
"AIN2",
|
|
"AIN3",
|
|
"AIN4",
|
|
"AIN5",
|
|
"AIN6",
|
|
"AIN7",
|
|
};
|
|
|
|
static int tiadc_channel_init(struct iio_dev *indio_dev, int channels)
|
|
{
|
|
struct tiadc_device *adc_dev = iio_priv(indio_dev);
|
|
struct iio_chan_spec *chan_array;
|
|
struct iio_chan_spec *chan;
|
|
int i;
|
|
|
|
indio_dev->num_channels = channels;
|
|
chan_array = kcalloc(channels,
|
|
sizeof(struct iio_chan_spec), GFP_KERNEL);
|
|
if (chan_array == NULL)
|
|
return -ENOMEM;
|
|
|
|
chan = chan_array;
|
|
for (i = 0; i < channels; i++, chan++) {
|
|
|
|
chan->type = IIO_VOLTAGE;
|
|
chan->indexed = 1;
|
|
chan->channel = adc_dev->channel_line[i];
|
|
chan->info_mask_separate = BIT(IIO_CHAN_INFO_RAW);
|
|
chan->datasheet_name = chan_name_ain[chan->channel];
|
|
chan->scan_index = i;
|
|
chan->scan_type.sign = 'u';
|
|
chan->scan_type.realbits = 12;
|
|
chan->scan_type.storagebits = 16;
|
|
}
|
|
|
|
indio_dev->channels = chan_array;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void tiadc_channels_remove(struct iio_dev *indio_dev)
|
|
{
|
|
kfree(indio_dev->channels);
|
|
}
|
|
|
|
static int tiadc_read_raw(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *chan,
|
|
int *val, int *val2, long mask)
|
|
{
|
|
struct tiadc_device *adc_dev = iio_priv(indio_dev);
|
|
int i, map_val;
|
|
unsigned int fifo1count, read, stepid;
|
|
bool found = false;
|
|
u32 step_en;
|
|
unsigned long timeout;
|
|
|
|
if (iio_buffer_enabled(indio_dev))
|
|
return -EBUSY;
|
|
|
|
step_en = get_adc_chan_step_mask(adc_dev, chan);
|
|
if (!step_en)
|
|
return -EINVAL;
|
|
|
|
fifo1count = tiadc_readl(adc_dev, REG_FIFO1CNT);
|
|
while (fifo1count--)
|
|
tiadc_readl(adc_dev, REG_FIFO1);
|
|
|
|
am335x_tsc_se_set_once(adc_dev->mfd_tscadc, step_en);
|
|
|
|
timeout = jiffies + usecs_to_jiffies
|
|
(IDLE_TIMEOUT * adc_dev->channels);
|
|
/* Wait for Fifo threshold interrupt */
|
|
while (1) {
|
|
fifo1count = tiadc_readl(adc_dev, REG_FIFO1CNT);
|
|
if (fifo1count)
|
|
break;
|
|
|
|
if (time_after(jiffies, timeout)) {
|
|
am335x_tsc_se_adc_done(adc_dev->mfd_tscadc);
|
|
return -EAGAIN;
|
|
}
|
|
}
|
|
map_val = chan->channel + TOTAL_CHANNELS;
|
|
|
|
/*
|
|
* We check the complete FIFO. We programmed just one entry but in case
|
|
* something went wrong we left empty handed (-EAGAIN previously) and
|
|
* then the value apeared somehow in the FIFO we would have two entries.
|
|
* Therefore we read every item and keep only the latest version of the
|
|
* requested channel.
|
|
*/
|
|
for (i = 0; i < fifo1count; i++) {
|
|
read = tiadc_readl(adc_dev, REG_FIFO1);
|
|
stepid = read & FIFOREAD_CHNLID_MASK;
|
|
stepid = stepid >> 0x10;
|
|
|
|
if (stepid == map_val) {
|
|
read = read & FIFOREAD_DATA_MASK;
|
|
found = true;
|
|
*val = (u16) read;
|
|
}
|
|
}
|
|
am335x_tsc_se_adc_done(adc_dev->mfd_tscadc);
|
|
|
|
if (found == false)
|
|
return -EBUSY;
|
|
return IIO_VAL_INT;
|
|
}
|
|
|
|
static const struct iio_info tiadc_info = {
|
|
.read_raw = &tiadc_read_raw,
|
|
.driver_module = THIS_MODULE,
|
|
};
|
|
|
|
static int tiadc_probe(struct platform_device *pdev)
|
|
{
|
|
struct iio_dev *indio_dev;
|
|
struct tiadc_device *adc_dev;
|
|
struct device_node *node = pdev->dev.of_node;
|
|
struct property *prop;
|
|
const __be32 *cur;
|
|
int err;
|
|
u32 val;
|
|
int channels = 0;
|
|
|
|
if (!node) {
|
|
dev_err(&pdev->dev, "Could not find valid DT data.\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
indio_dev = devm_iio_device_alloc(&pdev->dev,
|
|
sizeof(struct tiadc_device));
|
|
if (indio_dev == NULL) {
|
|
dev_err(&pdev->dev, "failed to allocate iio device\n");
|
|
return -ENOMEM;
|
|
}
|
|
adc_dev = iio_priv(indio_dev);
|
|
|
|
adc_dev->mfd_tscadc = ti_tscadc_dev_get(pdev);
|
|
|
|
of_property_for_each_u32(node, "ti,adc-channels", prop, cur, val) {
|
|
adc_dev->channel_line[channels] = val;
|
|
channels++;
|
|
}
|
|
adc_dev->channels = channels;
|
|
|
|
indio_dev->dev.parent = &pdev->dev;
|
|
indio_dev->name = dev_name(&pdev->dev);
|
|
indio_dev->modes = INDIO_DIRECT_MODE;
|
|
indio_dev->info = &tiadc_info;
|
|
|
|
tiadc_step_config(indio_dev);
|
|
tiadc_writel(adc_dev, REG_FIFO1THR, FIFO1_THRESHOLD);
|
|
|
|
err = tiadc_channel_init(indio_dev, adc_dev->channels);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
err = tiadc_iio_buffered_hardware_setup(indio_dev,
|
|
&tiadc_worker_h,
|
|
&tiadc_irq_h,
|
|
adc_dev->mfd_tscadc->irq,
|
|
IRQF_SHARED,
|
|
&tiadc_buffer_setup_ops);
|
|
|
|
if (err)
|
|
goto err_free_channels;
|
|
|
|
err = iio_device_register(indio_dev);
|
|
if (err)
|
|
goto err_buffer_unregister;
|
|
|
|
platform_set_drvdata(pdev, indio_dev);
|
|
|
|
return 0;
|
|
|
|
err_buffer_unregister:
|
|
tiadc_iio_buffered_hardware_remove(indio_dev);
|
|
err_free_channels:
|
|
tiadc_channels_remove(indio_dev);
|
|
return err;
|
|
}
|
|
|
|
static int tiadc_remove(struct platform_device *pdev)
|
|
{
|
|
struct iio_dev *indio_dev = platform_get_drvdata(pdev);
|
|
struct tiadc_device *adc_dev = iio_priv(indio_dev);
|
|
u32 step_en;
|
|
|
|
iio_device_unregister(indio_dev);
|
|
tiadc_iio_buffered_hardware_remove(indio_dev);
|
|
tiadc_channels_remove(indio_dev);
|
|
|
|
step_en = get_adc_step_mask(adc_dev);
|
|
am335x_tsc_se_clr(adc_dev->mfd_tscadc, step_en);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
static int tiadc_suspend(struct device *dev)
|
|
{
|
|
struct iio_dev *indio_dev = dev_get_drvdata(dev);
|
|
struct tiadc_device *adc_dev = iio_priv(indio_dev);
|
|
struct ti_tscadc_dev *tscadc_dev;
|
|
unsigned int idle;
|
|
|
|
tscadc_dev = ti_tscadc_dev_get(to_platform_device(dev));
|
|
if (!device_may_wakeup(tscadc_dev->dev)) {
|
|
idle = tiadc_readl(adc_dev, REG_CTRL);
|
|
idle &= ~(CNTRLREG_TSCSSENB);
|
|
tiadc_writel(adc_dev, REG_CTRL, (idle |
|
|
CNTRLREG_POWERDOWN));
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tiadc_resume(struct device *dev)
|
|
{
|
|
struct iio_dev *indio_dev = dev_get_drvdata(dev);
|
|
struct tiadc_device *adc_dev = iio_priv(indio_dev);
|
|
unsigned int restore;
|
|
|
|
/* Make sure ADC is powered up */
|
|
restore = tiadc_readl(adc_dev, REG_CTRL);
|
|
restore &= ~(CNTRLREG_POWERDOWN);
|
|
tiadc_writel(adc_dev, REG_CTRL, restore);
|
|
|
|
tiadc_step_config(indio_dev);
|
|
am335x_tsc_se_set_cache(adc_dev->mfd_tscadc,
|
|
adc_dev->buffer_en_ch_steps);
|
|
return 0;
|
|
}
|
|
|
|
static const struct dev_pm_ops tiadc_pm_ops = {
|
|
.suspend = tiadc_suspend,
|
|
.resume = tiadc_resume,
|
|
};
|
|
#define TIADC_PM_OPS (&tiadc_pm_ops)
|
|
#else
|
|
#define TIADC_PM_OPS NULL
|
|
#endif
|
|
|
|
static const struct of_device_id ti_adc_dt_ids[] = {
|
|
{ .compatible = "ti,am3359-adc", },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, ti_adc_dt_ids);
|
|
|
|
static struct platform_driver tiadc_driver = {
|
|
.driver = {
|
|
.name = "TI-am335x-adc",
|
|
.owner = THIS_MODULE,
|
|
.pm = TIADC_PM_OPS,
|
|
.of_match_table = ti_adc_dt_ids,
|
|
},
|
|
.probe = tiadc_probe,
|
|
.remove = tiadc_remove,
|
|
};
|
|
module_platform_driver(tiadc_driver);
|
|
|
|
MODULE_DESCRIPTION("TI ADC controller driver");
|
|
MODULE_AUTHOR("Rachna Patil <rachna@ti.com>");
|
|
MODULE_LICENSE("GPL");
|