mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-17 09:14:19 +08:00
5db44863b6
Implement support for WRITE SAME(10) and WRITE SAME(16) in the SCSI disk driver. - We set the default maximum to 0xFFFF because there are several devices out there that only support two-byte block counts even with WRITE SAME(16). We only enable transfers bigger than 0xFFFF if the device explicitly reports MAXIMUM WRITE SAME LENGTH in the BLOCK LIMITS VPD. - max_write_same_blocks can be overriden per-device basis in sysfs. - The UNMAP discovery heuristics remain unchanged but the discard limits are tweaked to match the "real" WRITE SAME commands. - In the error handling logic we now distinguish between WRITE SAME with and without UNMAP set. The discovery process heuristics are: - If the device reports a SCSI level of SPC-3 or greater we'll issue READ SUPPORTED OPERATION CODES to find out whether WRITE SAME(16) is supported. If that's the case we will use it. - If the device supports the block limits VPD and reports a MAXIMUM WRITE SAME LENGTH bigger than 0xFFFF we will use WRITE SAME(16). - Otherwise we will use WRITE SAME(10) unless the target LBA is beyond 0xFFFFFFFF or the block count exceeds 0xFFFF. - no_write_same is set for ATA, FireWire and USB. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Mike Snitzer <snitzer@redhat.com> Reviewed-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
185 lines
4.4 KiB
C
185 lines
4.4 KiB
C
#ifndef _SCSI_DISK_H
|
|
#define _SCSI_DISK_H
|
|
|
|
/*
|
|
* More than enough for everybody ;) The huge number of majors
|
|
* is a leftover from 16bit dev_t days, we don't really need that
|
|
* much numberspace.
|
|
*/
|
|
#define SD_MAJORS 16
|
|
|
|
/*
|
|
* Time out in seconds for disks and Magneto-opticals (which are slower).
|
|
*/
|
|
#define SD_TIMEOUT (30 * HZ)
|
|
#define SD_MOD_TIMEOUT (75 * HZ)
|
|
#define SD_FLUSH_TIMEOUT (60 * HZ)
|
|
#define SD_WRITE_SAME_TIMEOUT (120 * HZ)
|
|
|
|
/*
|
|
* Number of allowed retries
|
|
*/
|
|
#define SD_MAX_RETRIES 5
|
|
#define SD_PASSTHROUGH_RETRIES 1
|
|
#define SD_MAX_MEDIUM_TIMEOUTS 2
|
|
|
|
/*
|
|
* Size of the initial data buffer for mode and read capacity data
|
|
*/
|
|
#define SD_BUF_SIZE 512
|
|
|
|
/*
|
|
* Number of sectors at the end of the device to avoid multi-sector
|
|
* accesses to in the case of last_sector_bug
|
|
*/
|
|
#define SD_LAST_BUGGY_SECTORS 8
|
|
|
|
enum {
|
|
SD_EXT_CDB_SIZE = 32, /* Extended CDB size */
|
|
SD_MEMPOOL_SIZE = 2, /* CDB pool size */
|
|
};
|
|
|
|
enum {
|
|
SD_MAX_WS10_BLOCKS = 0xffff,
|
|
SD_MAX_WS16_BLOCKS = 0x7fffff,
|
|
};
|
|
|
|
enum {
|
|
SD_LBP_FULL = 0, /* Full logical block provisioning */
|
|
SD_LBP_UNMAP, /* Use UNMAP command */
|
|
SD_LBP_WS16, /* Use WRITE SAME(16) with UNMAP bit */
|
|
SD_LBP_WS10, /* Use WRITE SAME(10) with UNMAP bit */
|
|
SD_LBP_ZERO, /* Use WRITE SAME(10) with zero payload */
|
|
SD_LBP_DISABLE, /* Discard disabled due to failed cmd */
|
|
};
|
|
|
|
struct scsi_disk {
|
|
struct scsi_driver *driver; /* always &sd_template */
|
|
struct scsi_device *device;
|
|
struct device dev;
|
|
struct gendisk *disk;
|
|
atomic_t openers;
|
|
sector_t capacity; /* size in 512-byte sectors */
|
|
u32 max_ws_blocks;
|
|
u32 max_unmap_blocks;
|
|
u32 unmap_granularity;
|
|
u32 unmap_alignment;
|
|
u32 index;
|
|
unsigned int physical_block_size;
|
|
unsigned int max_medium_access_timeouts;
|
|
unsigned int medium_access_timed_out;
|
|
u8 media_present;
|
|
u8 write_prot;
|
|
u8 protection_type;/* Data Integrity Field */
|
|
u8 provisioning_mode;
|
|
unsigned ATO : 1; /* state of disk ATO bit */
|
|
unsigned WCE : 1; /* state of disk WCE bit */
|
|
unsigned RCD : 1; /* state of disk RCD bit, unused */
|
|
unsigned DPOFUA : 1; /* state of disk DPOFUA bit */
|
|
unsigned first_scan : 1;
|
|
unsigned lbpme : 1;
|
|
unsigned lbprz : 1;
|
|
unsigned lbpu : 1;
|
|
unsigned lbpws : 1;
|
|
unsigned lbpws10 : 1;
|
|
unsigned lbpvpd : 1;
|
|
unsigned ws16 : 1;
|
|
};
|
|
#define to_scsi_disk(obj) container_of(obj,struct scsi_disk,dev)
|
|
|
|
static inline struct scsi_disk *scsi_disk(struct gendisk *disk)
|
|
{
|
|
return container_of(disk->private_data, struct scsi_disk, driver);
|
|
}
|
|
|
|
#define sd_printk(prefix, sdsk, fmt, a...) \
|
|
(sdsk)->disk ? \
|
|
sdev_printk(prefix, (sdsk)->device, "[%s] " fmt, \
|
|
(sdsk)->disk->disk_name, ##a) : \
|
|
sdev_printk(prefix, (sdsk)->device, fmt, ##a)
|
|
|
|
static inline int scsi_medium_access_command(struct scsi_cmnd *scmd)
|
|
{
|
|
switch (scmd->cmnd[0]) {
|
|
case READ_6:
|
|
case READ_10:
|
|
case READ_12:
|
|
case READ_16:
|
|
case SYNCHRONIZE_CACHE:
|
|
case VERIFY:
|
|
case VERIFY_12:
|
|
case VERIFY_16:
|
|
case WRITE_6:
|
|
case WRITE_10:
|
|
case WRITE_12:
|
|
case WRITE_16:
|
|
case WRITE_SAME:
|
|
case WRITE_SAME_16:
|
|
case UNMAP:
|
|
return 1;
|
|
case VARIABLE_LENGTH_CMD:
|
|
switch (scmd->cmnd[9]) {
|
|
case READ_32:
|
|
case VERIFY_32:
|
|
case WRITE_32:
|
|
case WRITE_SAME_32:
|
|
return 1;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* A DIF-capable target device can be formatted with different
|
|
* protection schemes. Currently 0 through 3 are defined:
|
|
*
|
|
* Type 0 is regular (unprotected) I/O
|
|
*
|
|
* Type 1 defines the contents of the guard and reference tags
|
|
*
|
|
* Type 2 defines the contents of the guard and reference tags and
|
|
* uses 32-byte commands to seed the latter
|
|
*
|
|
* Type 3 defines the contents of the guard tag only
|
|
*/
|
|
|
|
enum sd_dif_target_protection_types {
|
|
SD_DIF_TYPE0_PROTECTION = 0x0,
|
|
SD_DIF_TYPE1_PROTECTION = 0x1,
|
|
SD_DIF_TYPE2_PROTECTION = 0x2,
|
|
SD_DIF_TYPE3_PROTECTION = 0x3,
|
|
};
|
|
|
|
/*
|
|
* Data Integrity Field tuple.
|
|
*/
|
|
struct sd_dif_tuple {
|
|
__be16 guard_tag; /* Checksum */
|
|
__be16 app_tag; /* Opaque storage */
|
|
__be32 ref_tag; /* Target LBA or indirect LBA */
|
|
};
|
|
|
|
#ifdef CONFIG_BLK_DEV_INTEGRITY
|
|
|
|
extern void sd_dif_config_host(struct scsi_disk *);
|
|
extern void sd_dif_prepare(struct request *rq, sector_t, unsigned int);
|
|
extern void sd_dif_complete(struct scsi_cmnd *, unsigned int);
|
|
|
|
#else /* CONFIG_BLK_DEV_INTEGRITY */
|
|
|
|
static inline void sd_dif_config_host(struct scsi_disk *disk)
|
|
{
|
|
}
|
|
static inline int sd_dif_prepare(struct request *rq, sector_t s, unsigned int a)
|
|
{
|
|
return 0;
|
|
}
|
|
static inline void sd_dif_complete(struct scsi_cmnd *cmd, unsigned int a)
|
|
{
|
|
}
|
|
|
|
#endif /* CONFIG_BLK_DEV_INTEGRITY */
|
|
|
|
#endif /* _SCSI_DISK_H */
|