mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-30 22:44:50 +08:00
ed13335204
Currently, lp55xx_of_populate_pdata() allocates lp55xx_platform_data if it's null. And it parses the DT and copies values into the 'client->dev.platform_data'. This may have architectural issue. Platform data is configurable through the DT or I2C board info inside the platform area. However, lp55xx common driver changes this configuration when it is loaded. So 'client->dev.platform_data' is not null anymore. Eventually, the driver initialization is not identical when it's unloaded and loaded again. The lp55xx common driver should use the private data, 'lp55xx_chip->pdata' instead of changing the original platform data. So, lp55xx_of_populate_pdata() is modified as follows. * Do not update 'dev->platform_data'. Return the pointer of new allocated lp55xx_platform_data. Then the driver points it to private data, 'lp55xx_chip->pdata'. * Each lp55xx driver checks the pointer and handles an error case. Then, original platform data configuration will be kept regardless of loading or unloading the driver. The driver allocates the memory and copies them from the DT if it's NULL. After the driver is loaded again, 'client->dev.platform_data' is same as initial load, so the driver is initialized identically. Cc: Toshi Kikuchi <toshik@chromium.org> Cc: linux-leds@vger.kernel.org Signed-off-by: Milo Kim <milo.kim@ti.com> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
209 lines
6.0 KiB
C
209 lines
6.0 KiB
C
/*
|
|
* LP55XX Common Driver Header
|
|
*
|
|
* Copyright (C) 2012 Texas Instruments
|
|
*
|
|
* Author: Milo(Woogyom) Kim <milo.kim@ti.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* version 2 as published by the Free Software Foundation.
|
|
*
|
|
* Derived from leds-lp5521.c, leds-lp5523.c
|
|
*/
|
|
|
|
#ifndef _LEDS_LP55XX_COMMON_H
|
|
#define _LEDS_LP55XX_COMMON_H
|
|
|
|
enum lp55xx_engine_index {
|
|
LP55XX_ENGINE_INVALID,
|
|
LP55XX_ENGINE_1,
|
|
LP55XX_ENGINE_2,
|
|
LP55XX_ENGINE_3,
|
|
LP55XX_ENGINE_MAX = LP55XX_ENGINE_3,
|
|
};
|
|
|
|
enum lp55xx_engine_mode {
|
|
LP55XX_ENGINE_DISABLED,
|
|
LP55XX_ENGINE_LOAD,
|
|
LP55XX_ENGINE_RUN,
|
|
};
|
|
|
|
#define LP55XX_DEV_ATTR_RW(name, show, store) \
|
|
DEVICE_ATTR(name, S_IRUGO | S_IWUSR, show, store)
|
|
#define LP55XX_DEV_ATTR_RO(name, show) \
|
|
DEVICE_ATTR(name, S_IRUGO, show, NULL)
|
|
#define LP55XX_DEV_ATTR_WO(name, store) \
|
|
DEVICE_ATTR(name, S_IWUSR, NULL, store)
|
|
|
|
#define show_mode(nr) \
|
|
static ssize_t show_engine##nr##_mode(struct device *dev, \
|
|
struct device_attribute *attr, \
|
|
char *buf) \
|
|
{ \
|
|
return show_engine_mode(dev, attr, buf, nr); \
|
|
}
|
|
|
|
#define store_mode(nr) \
|
|
static ssize_t store_engine##nr##_mode(struct device *dev, \
|
|
struct device_attribute *attr, \
|
|
const char *buf, size_t len) \
|
|
{ \
|
|
return store_engine_mode(dev, attr, buf, len, nr); \
|
|
}
|
|
|
|
#define show_leds(nr) \
|
|
static ssize_t show_engine##nr##_leds(struct device *dev, \
|
|
struct device_attribute *attr, \
|
|
char *buf) \
|
|
{ \
|
|
return show_engine_leds(dev, attr, buf, nr); \
|
|
}
|
|
|
|
#define store_leds(nr) \
|
|
static ssize_t store_engine##nr##_leds(struct device *dev, \
|
|
struct device_attribute *attr, \
|
|
const char *buf, size_t len) \
|
|
{ \
|
|
return store_engine_leds(dev, attr, buf, len, nr); \
|
|
}
|
|
|
|
#define store_load(nr) \
|
|
static ssize_t store_engine##nr##_load(struct device *dev, \
|
|
struct device_attribute *attr, \
|
|
const char *buf, size_t len) \
|
|
{ \
|
|
return store_engine_load(dev, attr, buf, len, nr); \
|
|
}
|
|
|
|
struct lp55xx_led;
|
|
struct lp55xx_chip;
|
|
|
|
/*
|
|
* struct lp55xx_reg
|
|
* @addr : Register address
|
|
* @val : Register value
|
|
*/
|
|
struct lp55xx_reg {
|
|
u8 addr;
|
|
u8 val;
|
|
};
|
|
|
|
/*
|
|
* struct lp55xx_device_config
|
|
* @reset : Chip specific reset command
|
|
* @enable : Chip specific enable command
|
|
* @max_channel : Maximum number of channels
|
|
* @post_init_device : Chip specific initialization code
|
|
* @brightness_work_fn : Brightness work function
|
|
* @set_led_current : LED current set function
|
|
* @firmware_cb : Call function when the firmware is loaded
|
|
* @run_engine : Run internal engine for pattern
|
|
* @dev_attr_group : Device specific attributes
|
|
*/
|
|
struct lp55xx_device_config {
|
|
const struct lp55xx_reg reset;
|
|
const struct lp55xx_reg enable;
|
|
const int max_channel;
|
|
|
|
/* define if the device has specific initialization process */
|
|
int (*post_init_device) (struct lp55xx_chip *chip);
|
|
|
|
/* access brightness register */
|
|
void (*brightness_work_fn)(struct work_struct *work);
|
|
|
|
/* current setting function */
|
|
void (*set_led_current) (struct lp55xx_led *led, u8 led_current);
|
|
|
|
/* access program memory when the firmware is loaded */
|
|
void (*firmware_cb)(struct lp55xx_chip *chip);
|
|
|
|
/* used for running firmware LED patterns */
|
|
void (*run_engine) (struct lp55xx_chip *chip, bool start);
|
|
|
|
/* additional device specific attributes */
|
|
const struct attribute_group *dev_attr_group;
|
|
};
|
|
|
|
/*
|
|
* struct lp55xx_engine
|
|
* @mode : Engine mode
|
|
* @led_mux : Mux bits for LED selection. Only used in LP5523
|
|
*/
|
|
struct lp55xx_engine {
|
|
enum lp55xx_engine_mode mode;
|
|
u16 led_mux;
|
|
};
|
|
|
|
/*
|
|
* struct lp55xx_chip
|
|
* @cl : I2C communication for access registers
|
|
* @pdata : Platform specific data
|
|
* @lock : Lock for user-space interface
|
|
* @num_leds : Number of registered LEDs
|
|
* @cfg : Device specific configuration data
|
|
* @engine_idx : Selected engine number
|
|
* @engines : Engine structure for the device attribute R/W interface
|
|
* @fw : Firmware data for running a LED pattern
|
|
*/
|
|
struct lp55xx_chip {
|
|
struct i2c_client *cl;
|
|
struct clk *clk;
|
|
struct lp55xx_platform_data *pdata;
|
|
struct mutex lock; /* lock for user-space interface */
|
|
int num_leds;
|
|
struct lp55xx_device_config *cfg;
|
|
enum lp55xx_engine_index engine_idx;
|
|
struct lp55xx_engine engines[LP55XX_ENGINE_MAX];
|
|
const struct firmware *fw;
|
|
};
|
|
|
|
/*
|
|
* struct lp55xx_led
|
|
* @chan_nr : Channel number
|
|
* @cdev : LED class device
|
|
* @led_current : Current setting at each led channel
|
|
* @max_current : Maximun current at each led channel
|
|
* @brightness_work : Workqueue for brightness control
|
|
* @brightness : Brightness value
|
|
* @chip : The lp55xx chip data
|
|
*/
|
|
struct lp55xx_led {
|
|
int chan_nr;
|
|
struct led_classdev cdev;
|
|
u8 led_current;
|
|
u8 max_current;
|
|
struct work_struct brightness_work;
|
|
u8 brightness;
|
|
struct lp55xx_chip *chip;
|
|
};
|
|
|
|
/* register access */
|
|
extern int lp55xx_write(struct lp55xx_chip *chip, u8 reg, u8 val);
|
|
extern int lp55xx_read(struct lp55xx_chip *chip, u8 reg, u8 *val);
|
|
extern int lp55xx_update_bits(struct lp55xx_chip *chip, u8 reg,
|
|
u8 mask, u8 val);
|
|
|
|
/* external clock detection */
|
|
extern bool lp55xx_is_extclk_used(struct lp55xx_chip *chip);
|
|
|
|
/* common device init/deinit functions */
|
|
extern int lp55xx_init_device(struct lp55xx_chip *chip);
|
|
extern void lp55xx_deinit_device(struct lp55xx_chip *chip);
|
|
|
|
/* common LED class device functions */
|
|
extern int lp55xx_register_leds(struct lp55xx_led *led,
|
|
struct lp55xx_chip *chip);
|
|
extern void lp55xx_unregister_leds(struct lp55xx_led *led,
|
|
struct lp55xx_chip *chip);
|
|
|
|
/* common device attributes functions */
|
|
extern int lp55xx_register_sysfs(struct lp55xx_chip *chip);
|
|
extern void lp55xx_unregister_sysfs(struct lp55xx_chip *chip);
|
|
|
|
/* common device tree population function */
|
|
extern struct lp55xx_platform_data
|
|
*lp55xx_of_populate_pdata(struct device *dev, struct device_node *np);
|
|
|
|
#endif /* _LEDS_LP55XX_COMMON_H */
|