mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-18 00:24:58 +08:00
c279c7261a
On this switch, the frame length enforcements are performed by the ingress policers. There are 2 types of those: regular L2 (also called best-effort) and Virtual Link policers (an ARINC664/AFDX concept for defining L2 streams with certain QoS abilities). To avoid future confusion, I prefer to call the reset reason "Best-effort policers", even though the VL policers are not yet supported. We also need to change the setup of the initial static config, such that DSA calls to .change_mtu (which are expensive) become no-ops and don't reset the switch 5 times. A driver-level decision is to unconditionally allow single VLAN-tagged traffic on all ports. The CPU port must accept an additional VLAN header for the DSA tag, which is again a driver-level decision. The policers actually count bytes not only from the SDU, but also from the Ethernet header and FCS, so those need to be accounted for as well. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|---|---|---|
| .. | ||
| b53 | ||
| microchip | ||
| mv88e6xxx | ||
| ocelot | ||
| qca | ||
| sja1105 | ||
| bcm_sf2_cfp.c | ||
| bcm_sf2_regs.h | ||
| bcm_sf2.c | ||
| bcm_sf2.h | ||
| dsa_loop_bdinfo.c | ||
| dsa_loop.c | ||
| dsa_loop.h | ||
| Kconfig | ||
| lan9303_i2c.c | ||
| lan9303_mdio.c | ||
| lan9303-core.c | ||
| lan9303.h | ||
| lantiq_gswip.c | ||
| lantiq_pce.h | ||
| Makefile | ||
| mt7530.c | ||
| mt7530.h | ||
| mv88e6060.c | ||
| mv88e6060.h | ||
| qca8k.c | ||
| qca8k.h | ||
| realtek-smi-core.c | ||
| realtek-smi-core.h | ||
| rtl8366.c | ||
| rtl8366rb.c | ||
| vitesse-vsc73xx-core.c | ||
| vitesse-vsc73xx-platform.c | ||
| vitesse-vsc73xx-spi.c | ||
| vitesse-vsc73xx.h | ||