linux/arch/arm
Daniel Thompson c26b999353 ARM: 8271/1: omap1: Migrate debug_ll macros to use 8250.S
The omap1's debug-macro.S is similar to the generic 8250 code. Compared to
the 8520 code the omap1 macro automatically determines what UART to use
based on breadcrumbs left by the bootloader and automatically copes with
the eccentric register layout on OMAP7XX.

This patch drops both these features and relies instead on the generic
8250 macros:

1. Dropping support for the bootloader breadcrumbs is identical to the
   way the migration was handled for OMAP2 (see 808b7e07464d...).

2. Support for OMAP7XX still exists but it must be configured by hand
   (DEBUG_OMAP7XXUART1/2/3) rather than handled at runtime.

Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Arnd Bergmann <arnd.bergmann@linaro.org>
Cc: linux-omap@vger.kernel.org
Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-01-21 15:49:39 +00:00
..
boot Please consider pulling the clk framework changes toward 3.19. It is 2014-12-20 16:42:36 -08:00
common Driver core patches for 3.19-rc1 2014-12-14 16:10:09 -08:00
configs ARM: 8268/1: configs: Enable DEBUG_LL_UART_8250 where needed 2015-01-21 15:49:36 +00:00
crypto crypto: arm - replace memset by memzero_explicit 2014-12-02 22:55:51 +08:00
firmware
include ARM: 8270/1: ks8695: Migrate debug_ll macros to shared directory 2015-01-21 15:49:38 +00:00
kernel More ACPI and power management updates for 3.19-rc1 2014-12-18 20:28:33 -08:00
kvm 3.19 changes for KVM: 2014-12-18 16:05:28 -08:00
lib ARM: 8225/1: Add unwinding support for memory copy functions 2014-11-27 16:00:25 +00:00
mach-asm9260 ARM: add mach-asm9260 2014-11-28 15:06:38 +01:00
mach-at91 ARM: SoC cleanups for 3.19 2014-12-09 14:18:35 -08:00
mach-axxia
mach-bcm Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip 2014-12-10 08:38:57 -08:00
mach-berlin ARM: berlin: do not select RESET_CONTROLLER 2014-11-18 20:27:53 +01:00
mach-clps711x
mach-cns3xxx
mach-davinci More ACPI and power management updates for 3.19-rc1 2014-12-18 20:28:33 -08:00
mach-dove
mach-ebsa110 ARM: ebsa110: Properly override I/O accessors 2014-11-10 15:15:34 +01:00
mach-efm32
mach-ep93xx arm: ep93xx: add dma_masks for the M2P and M2M DMA controllers 2014-11-28 12:34:08 +01:00
mach-exynos More ACPI and power management updates for 3.19-rc1 2014-12-18 20:28:33 -08:00
mach-footbridge
mach-gemini
mach-highbank
mach-hisi
mach-imx Driver core patches for 3.19-rc1 2014-12-14 16:10:09 -08:00
mach-integrator soc: move SoC driver for the ARM Integrator 2014-11-13 10:32:05 +01:00
mach-iop13xx PCI/MSI: Rename mask/unmask_msi_irq treewide 2014-11-23 13:01:45 +01:00
mach-iop32x
mach-iop33x
mach-ixp4xx ARM: ixp4xx: Properly override I/O accessors 2014-11-10 15:59:20 +01:00
mach-keystone ARM / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM 2014-12-13 00:42:49 +01:00
mach-ks8695 ARM: 8270/1: ks8695: Migrate debug_ll macros to shared directory 2015-01-21 15:49:38 +00:00
mach-lpc32xx
mach-mediatek ARM: SoC DT updates for 3.19 2014-12-09 14:57:37 -08:00
mach-meson ARM: meson: enable L2 cache 2014-11-18 16:35:01 +01:00
mach-mmp Please consider pulling the clk framework changes toward 3.19. It is 2014-12-20 16:42:36 -08:00
mach-moxart
mach-msm
mach-mv78xx0
mach-mvebu ARM: mvebu: use the cpufreq-dt platform_data for independent clocks 2014-12-04 17:31:32 +01:00
mach-mxs
mach-netx
mach-nomadik
mach-nspire
mach-omap1 ARM: 8271/1: omap1: Migrate debug_ll macros to use 8250.S 2015-01-21 15:49:39 +00:00
mach-omap2 Please consider pulling the clk framework changes toward 3.19. It is 2014-12-20 16:42:36 -08:00
mach-orion5x
mach-picoxcell
mach-prima2
mach-pxa Driver core patches for 3.19-rc1 2014-12-14 16:10:09 -08:00
mach-qcom
mach-realview
mach-rockchip ARM: rockchip: add basic smp support for rk3288 2014-11-05 22:18:40 +01:00
mach-rpc
mach-s3c24xx Driver core patches for 3.19-rc1 2014-12-14 16:10:09 -08:00
mach-s3c64xx cpuidle: Invert CPUIDLE_FLAG_TIME_VALID logic 2014-11-12 21:17:27 +01:00
mach-s5pv210
mach-sa1100 Driver core patches for 3.19-rc1 2014-12-14 16:10:09 -08:00
mach-shmobile Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linux 2014-12-15 15:52:01 -08:00
mach-socfpga socfpga: hotplug: put cpu1 in wfi 2014-11-20 17:00:32 +01:00
mach-spear
mach-sti
mach-sunxi ARM: sunxi: make sun6i SMP ops static 2014-11-16 11:02:33 +01:00
mach-tegra ACPI and power management updates for 3.19-rc1 2014-12-10 21:17:00 -08:00
mach-u300 Driver core patches for 3.19-rc1 2014-12-14 16:10:09 -08:00
mach-ux500
mach-versatile
mach-vexpress ARM: vexpress: Enable regulator framework when MMCI is in use 2014-11-28 21:57:07 +01:00
mach-vt8500
mach-w90x900
mach-zynq ARM: zynq: Remove secondary_startup() declaration from header 2014-12-01 09:32:22 +01:00
mm ARM: SoC/iommu configuration for 3.19 2014-12-16 14:53:01 -08:00
net
nwfpe ARM: drop nwfpe initialisation message from warning to info level 2014-11-21 15:24:54 +00:00
oprofile
plat-iop
plat-omap
plat-orion ACPI and power management updates for 3.19-rc1 2014-12-10 21:17:00 -08:00
plat-pxa
plat-samsung Driver core patches for 3.19-rc1 2014-12-14 16:10:09 -08:00
plat-versatile ARM: vexpress: Remove non-DT code 2014-11-28 16:08:16 +01:00
tools
vfp ARM: convert printk(KERN_* to pr_* 2014-11-21 15:24:50 +00:00
xen xen/arm: introduce GNTTABOP_cache_flush 2014-12-04 12:41:54 +00:00
Kconfig Merge branch 'akpm' (second patch-bomb from Andrew) 2014-12-13 13:00:36 -08:00
Kconfig-nommu
Kconfig.debug ARM: 8271/1: omap1: Migrate debug_ll macros to use 8250.S 2015-01-21 15:49:39 +00:00
Makefile