mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-30 22:44:50 +08:00
8f3cbcd6b4
Following by the below discussion, there's the potential UAF issue between regulator and mfd. https://lore.kernel.org/all/20221128143601.1698148-1-yangyingliang@huawei.com/ From the analysis of Yingliang CPU A |CPU B mt6370_probe() | devm_mfd_add_devices() | |mt6370_regulator_probe() | regulator_register() | //allocate init_data and add it to devres | regulator_of_get_init_data() i2c_unregister_device() | device_del() | devres_release_all() | // init_data is freed | release_nodes() | | // using init_data causes UAF | regulator_register() It's common to use mfd core to create child device for the regulator. In order to do the DT lookup for init data, the child that registered the regulator would pass its parent as the parameter. And this causes init data resource allocated to its parent, not itself. The issue happen when parent device is going to release and regulator core is still doing some operation of init data constraint for the regulator of child device. To fix it, this patch expand 'regulator_register' API to use the different devices for init data allocation and DT lookup. Reported-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: ChiYuan Huang <cy_huang@richtek.com> Link: https://lore.kernel.org/r/1670311341-32664-1-git-send-email-u0084500@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
298 lines
7.5 KiB
C
298 lines
7.5 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Copyright (C) STMicroelectronics 2017
|
|
*
|
|
* Author: Fabrice Gasnier <fabrice.gasnier@st.com>
|
|
*/
|
|
|
|
#include <linux/bitfield.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/io.h>
|
|
#include <linux/iopoll.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/regulator/driver.h>
|
|
#include <linux/regulator/of_regulator.h>
|
|
#include <linux/pm_runtime.h>
|
|
|
|
/* STM32 VREFBUF registers */
|
|
#define STM32_VREFBUF_CSR 0x00
|
|
|
|
/* STM32 VREFBUF CSR bitfields */
|
|
#define STM32_VRS GENMASK(6, 4)
|
|
#define STM32_VRR BIT(3)
|
|
#define STM32_HIZ BIT(1)
|
|
#define STM32_ENVR BIT(0)
|
|
|
|
#define STM32_VREFBUF_AUTO_SUSPEND_DELAY_MS 10
|
|
|
|
struct stm32_vrefbuf {
|
|
void __iomem *base;
|
|
struct clk *clk;
|
|
struct device *dev;
|
|
};
|
|
|
|
static const unsigned int stm32_vrefbuf_voltages[] = {
|
|
/* Matches resp. VRS = 000b, 001b, 010b, 011b */
|
|
2500000, 2048000, 1800000, 1500000,
|
|
};
|
|
|
|
static int stm32_vrefbuf_enable(struct regulator_dev *rdev)
|
|
{
|
|
struct stm32_vrefbuf *priv = rdev_get_drvdata(rdev);
|
|
u32 val;
|
|
int ret;
|
|
|
|
ret = pm_runtime_resume_and_get(priv->dev);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
val = readl_relaxed(priv->base + STM32_VREFBUF_CSR);
|
|
val = (val & ~STM32_HIZ) | STM32_ENVR;
|
|
writel_relaxed(val, priv->base + STM32_VREFBUF_CSR);
|
|
|
|
/*
|
|
* Vrefbuf startup time depends on external capacitor: wait here for
|
|
* VRR to be set. That means output has reached expected value.
|
|
* ~650us sleep should be enough for caps up to 1.5uF. Use 10ms as
|
|
* arbitrary timeout.
|
|
*/
|
|
ret = readl_poll_timeout(priv->base + STM32_VREFBUF_CSR, val,
|
|
val & STM32_VRR, 650, 10000);
|
|
if (ret) {
|
|
dev_err(&rdev->dev, "stm32 vrefbuf timed out!\n");
|
|
val = readl_relaxed(priv->base + STM32_VREFBUF_CSR);
|
|
val = (val & ~STM32_ENVR) | STM32_HIZ;
|
|
writel_relaxed(val, priv->base + STM32_VREFBUF_CSR);
|
|
}
|
|
|
|
pm_runtime_mark_last_busy(priv->dev);
|
|
pm_runtime_put_autosuspend(priv->dev);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int stm32_vrefbuf_disable(struct regulator_dev *rdev)
|
|
{
|
|
struct stm32_vrefbuf *priv = rdev_get_drvdata(rdev);
|
|
u32 val;
|
|
int ret;
|
|
|
|
ret = pm_runtime_resume_and_get(priv->dev);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
val = readl_relaxed(priv->base + STM32_VREFBUF_CSR);
|
|
val &= ~STM32_ENVR;
|
|
writel_relaxed(val, priv->base + STM32_VREFBUF_CSR);
|
|
|
|
pm_runtime_mark_last_busy(priv->dev);
|
|
pm_runtime_put_autosuspend(priv->dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int stm32_vrefbuf_is_enabled(struct regulator_dev *rdev)
|
|
{
|
|
struct stm32_vrefbuf *priv = rdev_get_drvdata(rdev);
|
|
int ret;
|
|
|
|
ret = pm_runtime_resume_and_get(priv->dev);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = readl_relaxed(priv->base + STM32_VREFBUF_CSR) & STM32_ENVR;
|
|
|
|
pm_runtime_mark_last_busy(priv->dev);
|
|
pm_runtime_put_autosuspend(priv->dev);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int stm32_vrefbuf_set_voltage_sel(struct regulator_dev *rdev,
|
|
unsigned sel)
|
|
{
|
|
struct stm32_vrefbuf *priv = rdev_get_drvdata(rdev);
|
|
u32 val;
|
|
int ret;
|
|
|
|
ret = pm_runtime_resume_and_get(priv->dev);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
val = readl_relaxed(priv->base + STM32_VREFBUF_CSR);
|
|
val = (val & ~STM32_VRS) | FIELD_PREP(STM32_VRS, sel);
|
|
writel_relaxed(val, priv->base + STM32_VREFBUF_CSR);
|
|
|
|
pm_runtime_mark_last_busy(priv->dev);
|
|
pm_runtime_put_autosuspend(priv->dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int stm32_vrefbuf_get_voltage_sel(struct regulator_dev *rdev)
|
|
{
|
|
struct stm32_vrefbuf *priv = rdev_get_drvdata(rdev);
|
|
u32 val;
|
|
int ret;
|
|
|
|
ret = pm_runtime_resume_and_get(priv->dev);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
val = readl_relaxed(priv->base + STM32_VREFBUF_CSR);
|
|
ret = FIELD_GET(STM32_VRS, val);
|
|
|
|
pm_runtime_mark_last_busy(priv->dev);
|
|
pm_runtime_put_autosuspend(priv->dev);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct regulator_ops stm32_vrefbuf_volt_ops = {
|
|
.enable = stm32_vrefbuf_enable,
|
|
.disable = stm32_vrefbuf_disable,
|
|
.is_enabled = stm32_vrefbuf_is_enabled,
|
|
.get_voltage_sel = stm32_vrefbuf_get_voltage_sel,
|
|
.set_voltage_sel = stm32_vrefbuf_set_voltage_sel,
|
|
.list_voltage = regulator_list_voltage_table,
|
|
};
|
|
|
|
static const struct regulator_desc stm32_vrefbuf_regu = {
|
|
.name = "vref",
|
|
.supply_name = "vdda",
|
|
.volt_table = stm32_vrefbuf_voltages,
|
|
.n_voltages = ARRAY_SIZE(stm32_vrefbuf_voltages),
|
|
.ops = &stm32_vrefbuf_volt_ops,
|
|
.off_on_delay = 1000,
|
|
.type = REGULATOR_VOLTAGE,
|
|
.owner = THIS_MODULE,
|
|
};
|
|
|
|
static int stm32_vrefbuf_probe(struct platform_device *pdev)
|
|
{
|
|
struct stm32_vrefbuf *priv;
|
|
struct regulator_config config = { };
|
|
struct regulator_dev *rdev;
|
|
int ret;
|
|
|
|
priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
|
|
if (!priv)
|
|
return -ENOMEM;
|
|
priv->dev = &pdev->dev;
|
|
|
|
priv->base = devm_platform_ioremap_resource(pdev, 0);
|
|
if (IS_ERR(priv->base))
|
|
return PTR_ERR(priv->base);
|
|
|
|
priv->clk = devm_clk_get(&pdev->dev, NULL);
|
|
if (IS_ERR(priv->clk))
|
|
return PTR_ERR(priv->clk);
|
|
|
|
pm_runtime_get_noresume(&pdev->dev);
|
|
pm_runtime_set_active(&pdev->dev);
|
|
pm_runtime_set_autosuspend_delay(&pdev->dev,
|
|
STM32_VREFBUF_AUTO_SUSPEND_DELAY_MS);
|
|
pm_runtime_use_autosuspend(&pdev->dev);
|
|
pm_runtime_enable(&pdev->dev);
|
|
|
|
ret = clk_prepare_enable(priv->clk);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "clk prepare failed with error %d\n", ret);
|
|
goto err_pm_stop;
|
|
}
|
|
|
|
config.dev = &pdev->dev;
|
|
config.driver_data = priv;
|
|
config.of_node = pdev->dev.of_node;
|
|
config.init_data = of_get_regulator_init_data(&pdev->dev,
|
|
pdev->dev.of_node,
|
|
&stm32_vrefbuf_regu);
|
|
|
|
rdev = regulator_register(&pdev->dev, &stm32_vrefbuf_regu, &config);
|
|
if (IS_ERR(rdev)) {
|
|
ret = PTR_ERR(rdev);
|
|
dev_err(&pdev->dev, "register failed with error %d\n", ret);
|
|
goto err_clk_dis;
|
|
}
|
|
platform_set_drvdata(pdev, rdev);
|
|
|
|
pm_runtime_mark_last_busy(&pdev->dev);
|
|
pm_runtime_put_autosuspend(&pdev->dev);
|
|
|
|
return 0;
|
|
|
|
err_clk_dis:
|
|
clk_disable_unprepare(priv->clk);
|
|
err_pm_stop:
|
|
pm_runtime_disable(&pdev->dev);
|
|
pm_runtime_set_suspended(&pdev->dev);
|
|
pm_runtime_put_noidle(&pdev->dev);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int stm32_vrefbuf_remove(struct platform_device *pdev)
|
|
{
|
|
struct regulator_dev *rdev = platform_get_drvdata(pdev);
|
|
struct stm32_vrefbuf *priv = rdev_get_drvdata(rdev);
|
|
|
|
pm_runtime_get_sync(&pdev->dev);
|
|
regulator_unregister(rdev);
|
|
clk_disable_unprepare(priv->clk);
|
|
pm_runtime_disable(&pdev->dev);
|
|
pm_runtime_set_suspended(&pdev->dev);
|
|
pm_runtime_put_noidle(&pdev->dev);
|
|
|
|
return 0;
|
|
};
|
|
|
|
static int __maybe_unused stm32_vrefbuf_runtime_suspend(struct device *dev)
|
|
{
|
|
struct regulator_dev *rdev = dev_get_drvdata(dev);
|
|
struct stm32_vrefbuf *priv = rdev_get_drvdata(rdev);
|
|
|
|
clk_disable_unprepare(priv->clk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __maybe_unused stm32_vrefbuf_runtime_resume(struct device *dev)
|
|
{
|
|
struct regulator_dev *rdev = dev_get_drvdata(dev);
|
|
struct stm32_vrefbuf *priv = rdev_get_drvdata(rdev);
|
|
|
|
return clk_prepare_enable(priv->clk);
|
|
}
|
|
|
|
static const struct dev_pm_ops stm32_vrefbuf_pm_ops = {
|
|
SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
|
|
pm_runtime_force_resume)
|
|
SET_RUNTIME_PM_OPS(stm32_vrefbuf_runtime_suspend,
|
|
stm32_vrefbuf_runtime_resume,
|
|
NULL)
|
|
};
|
|
|
|
static const struct of_device_id __maybe_unused stm32_vrefbuf_of_match[] = {
|
|
{ .compatible = "st,stm32-vrefbuf", },
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, stm32_vrefbuf_of_match);
|
|
|
|
static struct platform_driver stm32_vrefbuf_driver = {
|
|
.probe = stm32_vrefbuf_probe,
|
|
.remove = stm32_vrefbuf_remove,
|
|
.driver = {
|
|
.name = "stm32-vrefbuf",
|
|
.of_match_table = of_match_ptr(stm32_vrefbuf_of_match),
|
|
.pm = &stm32_vrefbuf_pm_ops,
|
|
},
|
|
};
|
|
module_platform_driver(stm32_vrefbuf_driver);
|
|
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_AUTHOR("Fabrice Gasnier <fabrice.gasnier@st.com>");
|
|
MODULE_DESCRIPTION("STMicroelectronics STM32 VREFBUF driver");
|
|
MODULE_ALIAS("platform:stm32-vrefbuf");
|