linux/scripts
Linus Torvalds 3a8a670eee Networking changes for 6.5.
Core
 ----
 
  - Rework the sendpage & splice implementations. Instead of feeding
    data into sockets page by page extend sendmsg handlers to support
    taking a reference on the data, controlled by a new flag called
    MSG_SPLICE_PAGES. Rework the handling of unexpected-end-of-file
    to invoke an additional callback instead of trying to predict what
    the right combination of MORE/NOTLAST flags is.
    Remove the MSG_SENDPAGE_NOTLAST flag completely.
 
  - Implement SCM_PIDFD, a new type of CMSG type analogous to
    SCM_CREDENTIALS, but it contains pidfd instead of plain pid.
 
  - Enable socket busy polling with CONFIG_RT.
 
  - Improve reliability and efficiency of reporting for ref_tracker.
 
  - Auto-generate a user space C library for various Netlink families.
 
 Protocols
 ---------
 
  - Allow TCP to shrink the advertised window when necessary, prevent
    sk_rcvbuf auto-tuning from growing the window all the way up to
    tcp_rmem[2].
 
  - Use per-VMA locking for "page-flipping" TCP receive zerocopy.
 
  - Prepare TCP for device-to-device data transfers, by making sure
    that payloads are always attached to skbs as page frags.
 
  - Make the backoff time for the first N TCP SYN retransmissions
    linear. Exponential backoff is unnecessarily conservative.
 
  - Create a new MPTCP getsockopt to retrieve all info (MPTCP_FULL_INFO).
 
  - Avoid waking up applications using TLS sockets until we have
    a full record.
 
  - Allow using kernel memory for protocol ioctl callbacks, paving
    the way to issuing ioctls over io_uring.
 
  - Add nolocalbypass option to VxLAN, forcing packets to be fully
    encapsulated even if they are destined for a local IP address.
 
  - Make TCPv4 use consistent hash in TIME_WAIT and SYN_RECV. Ensure
    in-kernel ECMP implementation (e.g. Open vSwitch) select the same
    link for all packets. Support L4 symmetric hashing in Open vSwitch.
 
  - PPPoE: make number of hash bits configurable.
 
  - Allow DNS to be overwritten by DHCPACK in the in-kernel DHCP client
    (ipconfig).
 
  - Add layer 2 miss indication and filtering, allowing higher layers
    (e.g. ACL filters) to make forwarding decisions based on whether
    packet matched forwarding state in lower devices (bridge).
 
  - Support matching on Connectivity Fault Management (CFM) packets.
 
  - Hide the "link becomes ready" IPv6 messages by demoting their
    printk level to debug.
 
  - HSR: don't enable promiscuous mode if device offloads the proto.
 
  - Support active scanning in IEEE 802.15.4.
 
  - Continue work on Multi-Link Operation for WiFi 7.
 
 BPF
 ---
 
  - Add precision propagation for subprogs and callbacks. This allows
    maintaining verification efficiency when subprograms are used,
    or in fact passing the verifier at all for complex programs,
    especially those using open-coded iterators.
 
  - Improve BPF's {g,s}setsockopt() length handling. Previously BPF
    assumed the length is always equal to the amount of written data.
    But some protos allow passing a NULL buffer to discover what
    the output buffer *should* be, without writing anything.
 
  - Accept dynptr memory as memory arguments passed to helpers.
 
  - Add routing table ID to bpf_fib_lookup BPF helper.
 
  - Support O_PATH FDs in BPF_OBJ_PIN and BPF_OBJ_GET commands.
 
  - Drop bpf_capable() check in BPF_MAP_FREEZE command (used to mark
    maps as read-only).
 
  - Show target_{obj,btf}_id in tracing link fdinfo.
 
  - Addition of several new kfuncs (most of the names are self-explanatory):
    - Add a set of new dynptr kfuncs: bpf_dynptr_adjust(),
      bpf_dynptr_is_null(), bpf_dynptr_is_rdonly(), bpf_dynptr_size()
      and bpf_dynptr_clone().
    - bpf_task_under_cgroup()
    - bpf_sock_destroy() - force closing sockets
    - bpf_cpumask_first_and(), rework bpf_cpumask_any*() kfuncs
 
 Netfilter
 ---------
 
  - Relax set/map validation checks in nf_tables. Allow checking
    presence of an entry in a map without using the value.
 
  - Increase ip_vs_conn_tab_bits range for 64BIT builds.
 
  - Allow updating size of a set.
 
  - Improve NAT tuple selection when connection is closing.
 
 Driver API
 ----------
 
  - Integrate netdev with LED subsystem, to allow configuring HW
    "offloaded" blinking of LEDs based on link state and activity
    (i.e. packets coming in and out).
 
  - Support configuring rate selection pins of SFP modules.
 
  - Factor Clause 73 auto-negotiation code out of the drivers, provide
    common helper routines.
 
  - Add more fool-proof helpers for managing lifetime of MDIO devices
    associated with the PCS layer.
 
  - Allow drivers to report advanced statistics related to Time Aware
    scheduler offload (taprio).
 
  - Allow opting out of VF statistics in link dump, to allow more VFs
    to fit into the message.
 
  - Split devlink instance and devlink port operations.
 
 New hardware / drivers
 ----------------------
 
  - Ethernet:
    - Synopsys EMAC4 IP support (stmmac)
    - Marvell 88E6361 8 port (5x1GE + 3x2.5GE) switches
    - Marvell 88E6250 7 port switches
    - Microchip LAN8650/1 Rev.B0 PHYs
    - MediaTek MT7981/MT7988 built-in 1GE PHY driver
 
  - WiFi:
    - Realtek RTL8192FU, 2.4 GHz, b/g/n mode, 2T2R, 300 Mbps
    - Realtek RTL8723DS (SDIO variant)
    - Realtek RTL8851BE
 
  - CAN:
    - Fintek F81604
 
 Drivers
 -------
 
  - Ethernet NICs:
    - Intel (100G, ice):
      - support dynamic interrupt allocation
      - use meta data match instead of VF MAC addr on slow-path
    - nVidia/Mellanox:
      - extend link aggregation to handle 4, rather than just 2 ports
      - spawn sub-functions without any features by default
    - OcteonTX2:
      - support HTB (Tx scheduling/QoS) offload
      - make RSS hash generation configurable
      - support selecting Rx queue using TC filters
    - Wangxun (ngbe/txgbe):
      - add basic Tx/Rx packet offloads
      - add phylink support (SFP/PCS control)
    - Freescale/NXP (enetc):
      - report TAPRIO packet statistics
    - Solarflare/AMD:
      - support matching on IP ToS and UDP source port of outer header
      - VxLAN and GENEVE tunnel encapsulation over IPv4 or IPv6
      - add devlink dev info support for EF10
 
  - Virtual NICs:
    - Microsoft vNIC:
      - size the Rx indirection table based on requested configuration
      - support VLAN tagging
    - Amazon vNIC:
      - try to reuse Rx buffers if not fully consumed, useful for ARM
        servers running with 16kB pages
    - Google vNIC:
      - support TCP segmentation of >64kB frames
 
  - Ethernet embedded switches:
    - Marvell (mv88e6xxx):
      - enable USXGMII (88E6191X)
    - Microchip:
     - lan966x: add support for Egress Stage 0 ACL engine
     - lan966x: support mapping packet priority to internal switch
       priority (based on PCP or DSCP)
 
  - Ethernet PHYs:
    - Broadcom PHYs:
      - support for Wake-on-LAN for BCM54210E/B50212E
      - report LPI counter
    - Microsemi PHYs: support RGMII delay configuration (VSC85xx)
    - Micrel PHYs: receive timestamp in the frame (LAN8841)
    - Realtek PHYs: support optional external PHY clock
    - Altera TSE PCS: merge the driver into Lynx PCS which it is
      a variant of
 
  - CAN: Kvaser PCIEcan:
    - support packet timestamping
 
  - WiFi:
    - Intel (iwlwifi):
      - major update for new firmware and Multi-Link Operation (MLO)
      - configuration rework to drop test devices and split
        the different families
      - support for segmented PNVM images and power tables
      - new vendor entries for PPAG (platform antenna gain) feature
    - Qualcomm 802.11ax (ath11k):
      - Multiple Basic Service Set Identifier (MBSSID) and
        Enhanced MBSSID Advertisement (EMA) support in AP mode
      - support factory test mode
    - RealTek (rtw89):
      - add RSSI based antenna diversity
      - support U-NII-4 channels on 5 GHz band
    - RealTek (rtl8xxxu):
      - AP mode support for 8188f
      - support USB RX aggregation for the newer chips
 
 Signed-off-by: Jakub Kicinski <kuba@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAmSbJM4ACgkQMUZtbf5S
 IrtoDhAAhEim1+LBIKf4lhPcVdZ2p/TkpnwTz5jsTwSeRBAxTwuNJ2fQhFXg13E3
 MnRq6QaEp8G4/tA/gynLvQop+FEZEnv+horP0zf/XLcC8euU7UrKdrpt/4xxdP07
 IL/fFWsoUGNO+L9LNaHwBo8g7nHvOkPscHEBHc2Xrvzab56TJk6vPySfLqcpKlNZ
 CHWDwTpgRqNZzSKiSpoMVd9OVMKUXcPYHpDmfEJ5l+e8vTXmZzOLHrSELHU5nP5f
 mHV7gxkDCTshoGcaed7UTiOvgu1p6E5EchDJxiLaSUbgsd8SZ3u4oXwRxgj33RK/
 fB2+UaLrRt/DdlHvT/Ph8e8Ygu77yIXMjT49jsfur/zVA0HEA2dFb7V6QlsYRmQp
 J25pnrdXmE15llgqsC0/UOW5J1laTjII+T2T70UOAqQl4LWYAQDG4WwsAqTzU0KY
 dueydDouTp9XC2WYrRUEQxJUzxaOaazskDUHc5c8oHp/zVBT+djdgtvVR9+gi6+7
 yy4elI77FlEEqL0ItdU/lSWINayAlPLsIHkMyhSGKX0XDpKjeycPqkNx4UterXB/
 JKIR5RBWllRft+igIngIkKX0tJGMU0whngiw7d1WLw25wgu4sB53hiWWoSba14hv
 tXMxwZs5iGaPcT38oRVMZz8I1kJM4Dz3SyI7twVvi4RUut64EG4=
 =9i4I
 -----END PGP SIGNATURE-----

Merge tag 'net-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking changes from Jakub Kicinski:
 "WiFi 7 and sendpage changes are the biggest pieces of work for this
  release. The latter will definitely require fixes but I think that we
  got it to a reasonable point.

  Core:

   - Rework the sendpage & splice implementations

     Instead of feeding data into sockets page by page extend sendmsg
     handlers to support taking a reference on the data, controlled by a
     new flag called MSG_SPLICE_PAGES

     Rework the handling of unexpected-end-of-file to invoke an
     additional callback instead of trying to predict what the right
     combination of MORE/NOTLAST flags is

     Remove the MSG_SENDPAGE_NOTLAST flag completely

   - Implement SCM_PIDFD, a new type of CMSG type analogous to
     SCM_CREDENTIALS, but it contains pidfd instead of plain pid

   - Enable socket busy polling with CONFIG_RT

   - Improve reliability and efficiency of reporting for ref_tracker

   - Auto-generate a user space C library for various Netlink families

  Protocols:

   - Allow TCP to shrink the advertised window when necessary, prevent
     sk_rcvbuf auto-tuning from growing the window all the way up to
     tcp_rmem[2]

   - Use per-VMA locking for "page-flipping" TCP receive zerocopy

   - Prepare TCP for device-to-device data transfers, by making sure
     that payloads are always attached to skbs as page frags

   - Make the backoff time for the first N TCP SYN retransmissions
     linear. Exponential backoff is unnecessarily conservative

   - Create a new MPTCP getsockopt to retrieve all info
     (MPTCP_FULL_INFO)

   - Avoid waking up applications using TLS sockets until we have a full
     record

   - Allow using kernel memory for protocol ioctl callbacks, paving the
     way to issuing ioctls over io_uring

   - Add nolocalbypass option to VxLAN, forcing packets to be fully
     encapsulated even if they are destined for a local IP address

   - Make TCPv4 use consistent hash in TIME_WAIT and SYN_RECV. Ensure
     in-kernel ECMP implementation (e.g. Open vSwitch) select the same
     link for all packets. Support L4 symmetric hashing in Open vSwitch

   - PPPoE: make number of hash bits configurable

   - Allow DNS to be overwritten by DHCPACK in the in-kernel DHCP client
     (ipconfig)

   - Add layer 2 miss indication and filtering, allowing higher layers
     (e.g. ACL filters) to make forwarding decisions based on whether
     packet matched forwarding state in lower devices (bridge)

   - Support matching on Connectivity Fault Management (CFM) packets

   - Hide the "link becomes ready" IPv6 messages by demoting their
     printk level to debug

   - HSR: don't enable promiscuous mode if device offloads the proto

   - Support active scanning in IEEE 802.15.4

   - Continue work on Multi-Link Operation for WiFi 7

  BPF:

   - Add precision propagation for subprogs and callbacks. This allows
     maintaining verification efficiency when subprograms are used, or
     in fact passing the verifier at all for complex programs,
     especially those using open-coded iterators

   - Improve BPF's {g,s}setsockopt() length handling. Previously BPF
     assumed the length is always equal to the amount of written data.
     But some protos allow passing a NULL buffer to discover what the
     output buffer *should* be, without writing anything

   - Accept dynptr memory as memory arguments passed to helpers

   - Add routing table ID to bpf_fib_lookup BPF helper

   - Support O_PATH FDs in BPF_OBJ_PIN and BPF_OBJ_GET commands

   - Drop bpf_capable() check in BPF_MAP_FREEZE command (used to mark
     maps as read-only)

   - Show target_{obj,btf}_id in tracing link fdinfo

   - Addition of several new kfuncs (most of the names are
     self-explanatory):
      - Add a set of new dynptr kfuncs: bpf_dynptr_adjust(),
        bpf_dynptr_is_null(), bpf_dynptr_is_rdonly(), bpf_dynptr_size()
        and bpf_dynptr_clone().
      - bpf_task_under_cgroup()
      - bpf_sock_destroy() - force closing sockets
      - bpf_cpumask_first_and(), rework bpf_cpumask_any*() kfuncs

  Netfilter:

   - Relax set/map validation checks in nf_tables. Allow checking
     presence of an entry in a map without using the value

   - Increase ip_vs_conn_tab_bits range for 64BIT builds

   - Allow updating size of a set

   - Improve NAT tuple selection when connection is closing

  Driver API:

   - Integrate netdev with LED subsystem, to allow configuring HW
     "offloaded" blinking of LEDs based on link state and activity
     (i.e. packets coming in and out)

   - Support configuring rate selection pins of SFP modules

   - Factor Clause 73 auto-negotiation code out of the drivers, provide
     common helper routines

   - Add more fool-proof helpers for managing lifetime of MDIO devices
     associated with the PCS layer

   - Allow drivers to report advanced statistics related to Time Aware
     scheduler offload (taprio)

   - Allow opting out of VF statistics in link dump, to allow more VFs
     to fit into the message

   - Split devlink instance and devlink port operations

  New hardware / drivers:

   - Ethernet:
      - Synopsys EMAC4 IP support (stmmac)
      - Marvell 88E6361 8 port (5x1GE + 3x2.5GE) switches
      - Marvell 88E6250 7 port switches
      - Microchip LAN8650/1 Rev.B0 PHYs
      - MediaTek MT7981/MT7988 built-in 1GE PHY driver

   - WiFi:
      - Realtek RTL8192FU, 2.4 GHz, b/g/n mode, 2T2R, 300 Mbps
      - Realtek RTL8723DS (SDIO variant)
      - Realtek RTL8851BE

   - CAN:
      - Fintek F81604

  Drivers:

   - Ethernet NICs:
      - Intel (100G, ice):
         - support dynamic interrupt allocation
         - use meta data match instead of VF MAC addr on slow-path
      - nVidia/Mellanox:
         - extend link aggregation to handle 4, rather than just 2 ports
         - spawn sub-functions without any features by default
      - OcteonTX2:
         - support HTB (Tx scheduling/QoS) offload
         - make RSS hash generation configurable
         - support selecting Rx queue using TC filters
      - Wangxun (ngbe/txgbe):
         - add basic Tx/Rx packet offloads
         - add phylink support (SFP/PCS control)
      - Freescale/NXP (enetc):
         - report TAPRIO packet statistics
      - Solarflare/AMD:
         - support matching on IP ToS and UDP source port of outer
           header
         - VxLAN and GENEVE tunnel encapsulation over IPv4 or IPv6
         - add devlink dev info support for EF10

   - Virtual NICs:
      - Microsoft vNIC:
         - size the Rx indirection table based on requested
           configuration
         - support VLAN tagging
      - Amazon vNIC:
         - try to reuse Rx buffers if not fully consumed, useful for ARM
           servers running with 16kB pages
      - Google vNIC:
         - support TCP segmentation of >64kB frames

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - enable USXGMII (88E6191X)
      - Microchip:
         - lan966x: add support for Egress Stage 0 ACL engine
         - lan966x: support mapping packet priority to internal switch
           priority (based on PCP or DSCP)

   - Ethernet PHYs:
      - Broadcom PHYs:
         - support for Wake-on-LAN for BCM54210E/B50212E
         - report LPI counter
      - Microsemi PHYs: support RGMII delay configuration (VSC85xx)
      - Micrel PHYs: receive timestamp in the frame (LAN8841)
      - Realtek PHYs: support optional external PHY clock
      - Altera TSE PCS: merge the driver into Lynx PCS which it is a
        variant of

   - CAN: Kvaser PCIEcan:
      - support packet timestamping

   - WiFi:
      - Intel (iwlwifi):
         - major update for new firmware and Multi-Link Operation (MLO)
         - configuration rework to drop test devices and split the
           different families
         - support for segmented PNVM images and power tables
         - new vendor entries for PPAG (platform antenna gain) feature
      - Qualcomm 802.11ax (ath11k):
         - Multiple Basic Service Set Identifier (MBSSID) and Enhanced
           MBSSID Advertisement (EMA) support in AP mode
         - support factory test mode
      - RealTek (rtw89):
         - add RSSI based antenna diversity
         - support U-NII-4 channels on 5 GHz band
      - RealTek (rtl8xxxu):
         - AP mode support for 8188f
         - support USB RX aggregation for the newer chips"

* tag 'net-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1602 commits)
  net: scm: introduce and use scm_recv_unix helper
  af_unix: Skip SCM_PIDFD if scm->pid is NULL.
  net: lan743x: Simplify comparison
  netlink: Add __sock_i_ino() for __netlink_diag_dump().
  net: dsa: avoid suspicious RCU usage for synced VLAN-aware MAC addresses
  Revert "af_unix: Call scm_recv() only after scm_set_cred()."
  phylink: ReST-ify the phylink_pcs_neg_mode() kdoc
  libceph: Partially revert changes to support MSG_SPLICE_PAGES
  net: phy: mscc: fix packet loss due to RGMII delays
  net: mana: use vmalloc_array and vcalloc
  net: enetc: use vmalloc_array and vcalloc
  ionic: use vmalloc_array and vcalloc
  pds_core: use vmalloc_array and vcalloc
  gve: use vmalloc_array and vcalloc
  octeon_ep: use vmalloc_array and vcalloc
  net: usb: qmi_wwan: add u-blox 0x1312 composition
  perf trace: fix MSG_SPLICE_PAGES build error
  ipvlan: Fix return value of ipvlan_queue_xmit()
  netfilter: nf_tables: fix underflow in chain reference counter
  netfilter: nf_tables: unbind non-anonymous set if rule construction fails
  ...
2023-06-28 16:43:10 -07:00
..
atomic locking/atomic: scripts: fix ${atomic}_dec_if_positive() kerneldoc 2023-06-16 16:46:30 +02:00
basic fixdep: do not parse *.rlib, *.rmeta, *.so 2023-01-22 23:43:33 +09:00
clang-tools scripts: handle BrokenPipeError for python scripts 2023-01-26 12:43:33 +09:00
coccinelle coccinelle: api/atomic_as_refcounter: include message type in output 2022-12-26 21:47:12 +01:00
dtc dts: add riscv include prefix link 2023-03-27 22:45:22 +02:00
dummy-tools kbuild: dummy-tools: pretend we understand __LONG_DOUBLE_128__ 2022-08-21 02:47:48 +09:00
gcc-plugins Merge branch 'for-linus/hardening' into for-next/hardening 2023-02-02 18:43:28 +00:00
gdb scripts/gdb: fix SB_* constants parsing 2023-06-19 13:19:32 -07:00
genksyms genksyms: adjust the output format to modpost 2022-05-24 16:33:20 +09:00
kconfig kconfig: menuconfig: reorder functions to remove forward declarations 2023-04-17 11:03:56 +09:00
ksymoops
mod x86/unwind/orc: Add ELF section with ORC version identifier 2023-06-16 17:17:42 +02:00
package Kbuild updates for v6.4 2023-04-30 11:32:53 -07:00
selinux selinux: remove runtime disable message in the install_policy.sh script 2022-09-20 14:12:25 -04:00
tracing tracing: Always use canonical ftrace path 2023-02-18 14:34:09 -05:00
.gitignore kbuild: use git-archive for source package creation 2023-03-16 22:46:12 +09:00
adjust_autoksyms.sh kbuild: split the second line of *.mod into *.usyms 2022-05-08 03:16:59 +09:00
as-version.sh kbuild: Update assembler calls to use proper flags and language target 2023-01-26 12:41:38 +09:00
asn1_compiler.c ASN.1: Fix check for strdup() success 2023-04-21 08:58:00 -07:00
bloat-o-meter scripts/bloat-o-meter: use the reverse flag for sort 2023-02-02 22:50:03 -08:00
bootgraph.pl
bpf_doc.py bpf: Remove extra whitespace in SPDX tag for syscall/helpers man pages 2023-04-11 17:45:57 +02:00
cc-can-link.sh
cc-version.sh scripts: Remove ICC-related dead code 2023-04-24 10:18:32 -07:00
check_extable.sh scripts: check_extable: fix typo in user error message 2021-09-08 11:50:28 -07:00
check-git kbuild: use git-archive for source package creation 2023-03-16 22:46:12 +09:00
check-local-export kbuild: rewrite check-local-export in sh/awk 2022-09-29 04:40:15 +09:00
check-sysctl-docs sysctl: Remove register_sysctl_table 2023-05-23 21:43:26 -07:00
checkdeclares.pl scripts: make some scripts executable 2021-08-10 09:13:25 +09:00
checkincludes.pl
checkkconfigsymbols.py scripts: handle BrokenPipeError for python scripts 2023-01-26 12:43:33 +09:00
checkpatch.pl checkpatch: check for 0-length and 1-element arrays 2023-06-09 17:44:24 -07:00
checkstack.pl sh: remove sh5/sh64 last fragments 2023-03-23 10:02:02 +01:00
checksyscalls.sh checksyscalls: ignore fstat to silence build warning on LoongArch 2023-03-23 17:18:32 -07:00
checkversion.pl
cleanfile
cleanpatch
coccicheck scripts: coccicheck: Use /usr/bin/env 2023-02-25 20:11:06 +01:00
config
const_structs.checkpatch const_structs.checkpatch.pl: add kobj_type 2023-02-08 13:33:29 +01:00
decode_stacktrace.sh scripts: decode_stacktrace: demangle Rust symbols 2022-09-28 09:01:40 +02:00
decodecode scripts/decodecode: Add support for RISC-V 2023-02-21 16:53:54 -08:00
depmod.sh
dev-needs.sh
diffconfig scripts: handle BrokenPipeError for python scripts 2023-01-26 12:43:33 +09:00
documentation-file-ref-check scripts: documentation-file-ref-check: fix bpf selftests path 2021-10-26 09:42:29 -06:00
export_report.pl
extract_xc3028.pl
extract-ikconfig scripts/extract-ikconfig: add zstd compression support 2022-08-29 13:58:47 +09:00
extract-module-sig.pl
extract-sys-certs.pl
extract-vmlinux
faddr2line scripts/faddr2line: Fix regression in name resolution on ppc64le 2022-11-16 10:42:10 +01:00
file-size.sh
find-unused-docs.sh
gcc-x86_32-has-stack-protector.sh
gcc-x86_64-has-stack-protector.sh
gen_autoksyms.sh kbuild: change module.order to list *.o instead of *.ko 2022-12-14 15:42:40 +09:00
gen_ksymdeps.sh kbuild: redo fake deps at include/ksym/*.h 2021-09-03 08:17:21 +09:00
gen-randstruct-seed.sh randstruct: Move seed generation into scripts/basic/ 2022-05-08 01:33:07 -07:00
generate_initcall_order.pl
generate_rust_analyzer.py scripts: generate_rust_analyzer: Handle sub-modules with no Makefile 2023-04-07 00:53:34 +02:00
generate_rust_target.rs x86: enable initial Rust support 2022-09-28 09:02:45 +02:00
get_abi.pl scripts/get_abi: Fix wrong script file name in the help message 2022-04-24 10:38:44 +02:00
get_dvb_firmware
get_feat.pl scripts: get_feat.pl: use /usr/bin/env to find perl 2022-06-30 12:22:17 -06:00
get_maintainer.pl get_maintainer: Honor mailmap for in file emails 2022-04-29 14:38:00 -07:00
gfp-translate scripts: fix the gfp flags header path in gfp-translate 2023-06-19 13:19:32 -07:00
head-object-list.txt scripts/head-object-list: Remove x86 from the list 2023-01-09 18:22:21 +01:00
headerdep.pl
headers_install.sh scripts: Update the CONFIG_* ignore list in headers_install.sh 2023-03-10 21:05:16 +01:00
insert-sys-cert.c
install.sh kbuild: factor out the common installation code into scripts/install.sh 2022-05-11 21:45:53 +09:00
is_rust_module.sh rust: fix regexp in scripts/is_rust_module.sh 2023-04-19 19:28:49 +02:00
jobserver-exec scripts: support GNU make 4.4 in jobserver-exec 2023-01-16 20:15:20 +09:00
kallsyms.c scripts/kallsyms: update the usage in the comment block 2023-04-17 11:03:56 +09:00
Kbuild.include kbuild: replace $(dot-target).tmp in filechk with $(tmp-target) 2023-01-22 23:43:33 +09:00
Kconfig.include kbuild: Update assembler calls to use proper flags and language target 2023-01-26 12:41:38 +09:00
kernel-doc docs: scripts: kernel-doc: accept bitwise negation like ~@var 2023-06-05 09:57:23 +02:00
ld-version.sh
leaking_addresses.pl leaking_addresses: also skip canonical ftrace path 2023-03-29 06:52:08 -04:00
Lindent
link-vmlinux.sh Kbuild updates for v6.4 2023-04-30 11:32:53 -07:00
Makefile kbuild: use git-archive for source package creation 2023-03-16 22:46:12 +09:00
Makefile.asm-generic kbuild: add kbuild-file macro 2022-11-22 23:40:02 +09:00
Makefile.build rust: upgrade to Rust 1.68.2 2023-05-31 17:35:03 +02:00
Makefile.clang kbuild: clang: do not use CROSS_COMPILE for target triple 2023-04-17 11:23:06 +09:00
Makefile.clean kbuild: add kbuild-file macro 2022-11-22 23:40:02 +09:00
Makefile.compiler kbuild: Update assembler calls to use proper flags and language target 2023-01-26 12:41:38 +09:00
Makefile.debug Makefile.debug: support for -gz=zstd 2022-11-21 10:18:39 +09:00
Makefile.defconf kbuild: Provide a version of merge_into_defconfig without override warnings 2023-02-13 20:18:28 +01:00
Makefile.dtbinst kbuild: add kbuild-file macro 2022-11-22 23:40:02 +09:00
Makefile.extrawarn kbuild: add -Wundef to KBUILD_CPPFLAGS for W=1 builds 2022-12-11 17:28:32 +09:00
Makefile.gcc-plugins gcc-plugins: Undefine LATENT_ENTROPY_PLUGIN when plugin disabled for a file 2022-08-16 12:25:53 -07:00
Makefile.headersinst
Makefile.host kbuild: remove sed commands after rustc rules 2023-01-22 23:43:33 +09:00
Makefile.kasan kasan: remove hwasan-kernel-mem-intrinsic-prefix=1 for clang-14 2023-04-18 16:29:43 -07:00
Makefile.kcov
Makefile.kcsan kcsan: Ignore GCC 11+ warnings about TSan runtime support 2021-12-09 16:42:27 -08:00
Makefile.kmsan kmsan: add KMSAN runtime core 2022-10-03 14:03:19 -07:00
Makefile.lib kbuild: unify cmd_dt_S_dtb and cmd_dt_S_dtbo 2023-01-22 23:43:33 +09:00
Makefile.modfinal kbuild: rename cmd_$@ to savedcmd_$@ in *.cmd files 2023-01-22 23:43:33 +09:00
Makefile.modinst modules-6.3-rc1 2023-02-23 14:05:08 -08:00
Makefile.modpost kbuild: do not automatically add -w option to modpost 2023-02-05 18:51:22 +09:00
Makefile.package Kbuild updates for v6.4 2023-04-30 11:32:53 -07:00
Makefile.randstruct randstruct: Enable Clang support 2022-05-08 01:33:07 -07:00
Makefile.ubsan ubsan: Tighten UBSAN_BOUNDS on GCC 2023-05-16 13:57:14 -07:00
Makefile.userprogs
Makefile.vmlinux kbuild: Fix CFI hash randomization with KASAN 2023-01-13 15:22:03 -08:00
Makefile.vmlinux_o kbuild: move modules.builtin(.modinfo) rules to Makefile.vmlinux_o 2022-10-03 03:52:58 +09:00
makelst
markup_oops.pl
min-tool-version.sh Locking changes for v6.5: 2023-06-27 14:14:30 -07:00
misc-check kbuild: make W=1 warn files that are tracked but ignored by git 2023-01-22 23:43:33 +09:00
mkcompile_h Revert "kbuild: Make scripts/compile.h when sh != bash" 2022-09-29 04:40:15 +09:00
mksysmap scripts/kallsyms: move compiler-generated symbol patterns to mksysmap 2023-04-17 11:03:56 +09:00
mkuboot.sh
module.lds.S arm64: unwind: add asynchronous unwind tables to kernel and modules 2022-11-09 18:06:35 +00:00
modules-check.sh kbuild: change module.order to list *.o instead of *.ko 2022-12-14 15:42:40 +09:00
nsdeps scripts/nsdeps: adjust to the format change of *.mod files 2022-06-08 20:14:13 +09:00
objdiff kbuild: clean .tmp_* pattern by make clean 2022-06-05 06:20:57 +09:00
objdump-func scripts/objdump-func: Support multiple functions 2023-04-14 16:08:28 +02:00
orc_hash.sh x86/unwind/orc: Add ELF section with ORC version identifier 2023-06-16 17:17:42 +02:00
pahole-flags.sh bpf: Add --skip_encoding_btf_inconsistent_proto, --btf_gen_optimized to pahole flags for v1.25 2023-05-12 11:47:05 -07:00
pahole-version.sh kbuild: Add CONFIG_PAHOLE_VERSION 2022-02-02 11:19:33 +01:00
parse-maintainers.pl
patch-kernel
profile2linkerlist.pl
prune-kernel scripts/prune-kernel: Use kernel-install if available 2022-05-11 21:46:38 +09:00
recordmcount.c recordmcount: Fix memory leaks in the uwrite function 2023-04-25 21:10:20 -04:00
recordmcount.h
recordmcount.pl nds32: Remove the architecture 2022-03-07 13:54:59 +01:00
relocs_check.sh powerpc: Move script to check relocations at compile time in scripts/ 2023-04-19 07:46:31 -07:00
remove-stale-files kbuild: do not put .scmversion into the source tarball 2023-01-30 13:00:30 +09:00
rust_is_available_bindgen_libclang.h scripts: add rust_is_available.sh 2022-09-28 09:02:06 +02:00
rust_is_available.sh scripts: add rust_is_available.sh 2022-09-28 09:02:06 +02:00
setlocalversion kbuild: use git-archive for source package creation 2023-03-16 22:46:12 +09:00
show_delta
sign-file.c sign-file: Fix confusing error messages 2022-08-03 23:56:20 +03:00
sorttable.c LoongArch: extable: Add type and data fields 2022-12-14 08:36:11 +08:00
sorttable.h x86,objtool: Split UNWIND_HINT_EMPTY in two 2023-03-23 23:18:58 +01:00
spdxcheck-test.sh docs: move Linux logo into a new images folder 2022-06-01 09:32:45 -06:00
spdxcheck.py scripts/spdxcheck: Put excluded files and directories into a separate file 2022-05-18 15:34:33 +02:00
spdxexclude scripts/spdxcheck: Exclude top-level README 2022-05-18 15:35:42 +02:00
spelling.txt scripts/spelling.txt: add more spellings to spelling.txt 2023-06-09 17:44:13 -07:00
sphinx-pre-install docs: sphinx-pre-install: don't require the RTD theme 2022-10-13 11:14:43 -06:00
split-man.pl
stackdelta
stackusage
subarch.include LoongArch: Add build infrastructure 2022-06-03 20:09:27 +08:00
syscallhdr.sh
syscallnr.sh scripts: make some scripts executable 2021-08-10 09:13:25 +09:00
syscalltbl.sh
tags.sh Kbuild updates for v6.3 2023-02-26 11:53:25 -08:00
test_fortify.sh fortify: Update compile-time tests for Clang 14 2022-02-13 16:50:06 -08:00
tools-support-relr.sh Makefile: use -z pack-relative-relocs 2023-04-17 11:23:06 +09:00
unifdef.c
ver_linux
xen-hypercalls.sh scripts: make some scripts executable 2021-08-10 09:13:25 +09:00
xz_wrap.sh