linux/arch/arc/boot/dts
Alexey Brodkin 7cacc5bf60 ARC: [axs101] STAR 9000799830: Fix SD cards support
As DW Mobile Storage databook says it's required to use "Hold Register"
if card is enumerated in SDR12 or SDR25 modes.
It means we need to act in the same way as in Altera's Socfpga
implementation - set "use hold reg" bit in commad.

Note that for upstream proper solution would be to remove
dw_mci_pltfm_prepare_command() at all and set the bit right in
dw_mci_prepare_command() for all platforms.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-06-19 18:09:31 +05:30
..
abilis_tb10x.dtsi dmaengine: dw: define DW_DMA_MAX_NR_MASTERS 2015-02-04 22:39:44 -08:00
abilis_tb100_dvk.dts ARC: [TB10x] Updates for GPIO and pinctrl 2013-11-11 09:57:44 +05:30
abilis_tb100.dtsi ARC: [TB10x] Updates for GPIO and pinctrl 2013-11-11 09:57:44 +05:30
abilis_tb101_dvk.dts ARC: [TB10x] Updates for GPIO and pinctrl 2013-11-11 09:57:44 +05:30
abilis_tb101.dtsi ARC: [TB10x] Updates for GPIO and pinctrl 2013-11-11 09:57:44 +05:30
axc001.dtsi ARC: [axs101] Add support for AXS101 SDP (software development platform) 2015-06-19 18:09:30 +05:30
axs10x_mb.dtsi ARC: [axs101] STAR 9000799830: Fix SD cards support 2015-06-19 18:09:31 +05:30
axs101.dts ARC: [axs101] support early 8250 uart 2015-06-19 18:09:30 +05:30
Makefile ARC: [plat_arcfpga]->[plat_sim] 2015-06-19 18:09:26 +05:30
nsim_700.dts ARC: [plat_arcfpga]->[plat_sim] 2015-06-19 18:09:26 +05:30
nsimosci.dts ARC: [nsimosci] move peripherals to match model to FPGA 2014-12-15 11:24:58 +05:30
skeleton.dtsi ARC: [plat-arcfpga]: Enabling DeviceTree for Angel4 board 2013-02-15 23:15:57 +05:30