mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-23 02:54:32 +08:00
03aa254f1e
Freescale QorIQ T4 and B4 introduce new 8-channel DMA engines, this patch adds the device tree nodes for them. Signed-off-by: Hongbo Zhang <hongbo.zhang@freescale.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
209 lines
6.8 KiB
Plaintext
209 lines
6.8 KiB
Plaintext
* Freescale DMA Controllers
|
|
|
|
** Freescale Elo DMA Controller
|
|
This is a little-endian 4-channel DMA controller, used in Freescale mpc83xx
|
|
series chips such as mpc8315, mpc8349, mpc8379 etc.
|
|
|
|
Required properties:
|
|
|
|
- compatible : must include "fsl,elo-dma"
|
|
- reg : DMA General Status Register, i.e. DGSR which contains
|
|
status for all the 4 DMA channels
|
|
- ranges : describes the mapping between the address space of the
|
|
DMA channels and the address space of the DMA controller
|
|
- cell-index : controller index. 0 for controller @ 0x8100
|
|
- interrupts : interrupt specifier for DMA IRQ
|
|
- interrupt-parent : optional, if needed for interrupt mapping
|
|
|
|
- DMA channel nodes:
|
|
- compatible : must include "fsl,elo-dma-channel"
|
|
However, see note below.
|
|
- reg : DMA channel specific registers
|
|
- cell-index : DMA channel index starts at 0.
|
|
|
|
Optional properties:
|
|
- interrupts : interrupt specifier for DMA channel IRQ
|
|
(on 83xx this is expected to be identical to
|
|
the interrupts property of the parent node)
|
|
- interrupt-parent : optional, if needed for interrupt mapping
|
|
|
|
Example:
|
|
dma@82a8 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "fsl,mpc8349-dma", "fsl,elo-dma";
|
|
reg = <0x82a8 4>;
|
|
ranges = <0 0x8100 0x1a4>;
|
|
interrupt-parent = <&ipic>;
|
|
interrupts = <71 8>;
|
|
cell-index = <0>;
|
|
dma-channel@0 {
|
|
compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
|
|
cell-index = <0>;
|
|
reg = <0 0x80>;
|
|
interrupt-parent = <&ipic>;
|
|
interrupts = <71 8>;
|
|
};
|
|
dma-channel@80 {
|
|
compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
|
|
cell-index = <1>;
|
|
reg = <0x80 0x80>;
|
|
interrupt-parent = <&ipic>;
|
|
interrupts = <71 8>;
|
|
};
|
|
dma-channel@100 {
|
|
compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
|
|
cell-index = <2>;
|
|
reg = <0x100 0x80>;
|
|
interrupt-parent = <&ipic>;
|
|
interrupts = <71 8>;
|
|
};
|
|
dma-channel@180 {
|
|
compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
|
|
cell-index = <3>;
|
|
reg = <0x180 0x80>;
|
|
interrupt-parent = <&ipic>;
|
|
interrupts = <71 8>;
|
|
};
|
|
};
|
|
|
|
** Freescale EloPlus DMA Controller
|
|
This is a 4-channel DMA controller with extended addresses and chaining,
|
|
mainly used in Freescale mpc85xx/86xx, Pxxx and BSC series chips, such as
|
|
mpc8540, mpc8641 p4080, bsc9131 etc.
|
|
|
|
Required properties:
|
|
|
|
- compatible : must include "fsl,eloplus-dma"
|
|
- reg : DMA General Status Register, i.e. DGSR which contains
|
|
status for all the 4 DMA channels
|
|
- cell-index : controller index. 0 for controller @ 0x21000,
|
|
1 for controller @ 0xc000
|
|
- ranges : describes the mapping between the address space of the
|
|
DMA channels and the address space of the DMA controller
|
|
|
|
- DMA channel nodes:
|
|
- compatible : must include "fsl,eloplus-dma-channel"
|
|
However, see note below.
|
|
- cell-index : DMA channel index starts at 0.
|
|
- reg : DMA channel specific registers
|
|
- interrupts : interrupt specifier for DMA channel IRQ
|
|
- interrupt-parent : optional, if needed for interrupt mapping
|
|
|
|
Example:
|
|
dma@21300 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "fsl,mpc8540-dma", "fsl,eloplus-dma";
|
|
reg = <0x21300 4>;
|
|
ranges = <0 0x21100 0x200>;
|
|
cell-index = <0>;
|
|
dma-channel@0 {
|
|
compatible = "fsl,mpc8540-dma-channel", "fsl,eloplus-dma-channel";
|
|
reg = <0 0x80>;
|
|
cell-index = <0>;
|
|
interrupt-parent = <&mpic>;
|
|
interrupts = <20 2>;
|
|
};
|
|
dma-channel@80 {
|
|
compatible = "fsl,mpc8540-dma-channel", "fsl,eloplus-dma-channel";
|
|
reg = <0x80 0x80>;
|
|
cell-index = <1>;
|
|
interrupt-parent = <&mpic>;
|
|
interrupts = <21 2>;
|
|
};
|
|
dma-channel@100 {
|
|
compatible = "fsl,mpc8540-dma-channel", "fsl,eloplus-dma-channel";
|
|
reg = <0x100 0x80>;
|
|
cell-index = <2>;
|
|
interrupt-parent = <&mpic>;
|
|
interrupts = <22 2>;
|
|
};
|
|
dma-channel@180 {
|
|
compatible = "fsl,mpc8540-dma-channel", "fsl,eloplus-dma-channel";
|
|
reg = <0x180 0x80>;
|
|
cell-index = <3>;
|
|
interrupt-parent = <&mpic>;
|
|
interrupts = <23 2>;
|
|
};
|
|
};
|
|
|
|
** Freescale Elo3 DMA Controller
|
|
DMA controller which has same function as EloPlus except that Elo3 has 8
|
|
channels while EloPlus has only 4, it is used in Freescale Txxx and Bxxx
|
|
series chips, such as t1040, t4240, b4860.
|
|
|
|
Required properties:
|
|
|
|
- compatible : must include "fsl,elo3-dma"
|
|
- reg : contains two entries for DMA General Status Registers,
|
|
i.e. DGSR0 which includes status for channel 1~4, and
|
|
DGSR1 for channel 5~8
|
|
- ranges : describes the mapping between the address space of the
|
|
DMA channels and the address space of the DMA controller
|
|
|
|
- DMA channel nodes:
|
|
- compatible : must include "fsl,eloplus-dma-channel"
|
|
- reg : DMA channel specific registers
|
|
- interrupts : interrupt specifier for DMA channel IRQ
|
|
- interrupt-parent : optional, if needed for interrupt mapping
|
|
|
|
Example:
|
|
dma@100300 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "fsl,elo3-dma";
|
|
reg = <0x100300 0x4>,
|
|
<0x100600 0x4>;
|
|
ranges = <0x0 0x100100 0x500>;
|
|
dma-channel@0 {
|
|
compatible = "fsl,eloplus-dma-channel";
|
|
reg = <0x0 0x80>;
|
|
interrupts = <28 2 0 0>;
|
|
};
|
|
dma-channel@80 {
|
|
compatible = "fsl,eloplus-dma-channel";
|
|
reg = <0x80 0x80>;
|
|
interrupts = <29 2 0 0>;
|
|
};
|
|
dma-channel@100 {
|
|
compatible = "fsl,eloplus-dma-channel";
|
|
reg = <0x100 0x80>;
|
|
interrupts = <30 2 0 0>;
|
|
};
|
|
dma-channel@180 {
|
|
compatible = "fsl,eloplus-dma-channel";
|
|
reg = <0x180 0x80>;
|
|
interrupts = <31 2 0 0>;
|
|
};
|
|
dma-channel@300 {
|
|
compatible = "fsl,eloplus-dma-channel";
|
|
reg = <0x300 0x80>;
|
|
interrupts = <76 2 0 0>;
|
|
};
|
|
dma-channel@380 {
|
|
compatible = "fsl,eloplus-dma-channel";
|
|
reg = <0x380 0x80>;
|
|
interrupts = <77 2 0 0>;
|
|
};
|
|
dma-channel@400 {
|
|
compatible = "fsl,eloplus-dma-channel";
|
|
reg = <0x400 0x80>;
|
|
interrupts = <78 2 0 0>;
|
|
};
|
|
dma-channel@480 {
|
|
compatible = "fsl,eloplus-dma-channel";
|
|
reg = <0x480 0x80>;
|
|
interrupts = <79 2 0 0>;
|
|
};
|
|
};
|
|
|
|
Note on DMA channel compatible properties: The compatible property must say
|
|
"fsl,elo-dma-channel" or "fsl,eloplus-dma-channel" to be used by the Elo DMA
|
|
driver (fsldma). Any DMA channel used by fsldma cannot be used by another
|
|
DMA driver, such as the SSI sound drivers for the MPC8610. Therefore, any DMA
|
|
channel that should be used for another driver should not use
|
|
"fsl,elo-dma-channel" or "fsl,eloplus-dma-channel". For the SSI drivers, for
|
|
example, the compatible property should be "fsl,ssi-dma-channel". See ssi.txt
|
|
for more information.
|