mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-27 13:05:03 +08:00
81a0bc39ea
This patch adds EFI stub support for the ARM Linux kernel. The EFI stub operates similarly to the x86 and arm64 stubs: it is a shim between the EFI firmware and the normal zImage entry point, and sets up the environment that the zImage is expecting. This includes optionally loading the initrd and device tree from the system partition based on the kernel command line. Signed-off-by: Roy Franz <roy.franz@linaro.org> Tested-by: Ryan Harkin <ryan.harkin@linaro.org> Reviewed-by: Matt Fleming <matt@codeblueprint.co.uk> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
1410 lines
35 KiB
ArmAsm
1410 lines
35 KiB
ArmAsm
/*
|
|
* linux/arch/arm/boot/compressed/head.S
|
|
*
|
|
* Copyright (C) 1996-2002 Russell King
|
|
* Copyright (C) 2004 Hyok S. Choi (MPU support)
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
#include <linux/linkage.h>
|
|
#include <asm/assembler.h>
|
|
#include <asm/v7m.h>
|
|
|
|
#include "efi-header.S"
|
|
|
|
AR_CLASS( .arch armv7-a )
|
|
M_CLASS( .arch armv7-m )
|
|
|
|
/*
|
|
* Debugging stuff
|
|
*
|
|
* Note that these macros must not contain any code which is not
|
|
* 100% relocatable. Any attempt to do so will result in a crash.
|
|
* Please select one of the following when turning on debugging.
|
|
*/
|
|
#ifdef DEBUG
|
|
|
|
#if defined(CONFIG_DEBUG_ICEDCC)
|
|
|
|
#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K) || defined(CONFIG_CPU_V7)
|
|
.macro loadsp, rb, tmp
|
|
.endm
|
|
.macro writeb, ch, rb
|
|
mcr p14, 0, \ch, c0, c5, 0
|
|
.endm
|
|
#elif defined(CONFIG_CPU_XSCALE)
|
|
.macro loadsp, rb, tmp
|
|
.endm
|
|
.macro writeb, ch, rb
|
|
mcr p14, 0, \ch, c8, c0, 0
|
|
.endm
|
|
#else
|
|
.macro loadsp, rb, tmp
|
|
.endm
|
|
.macro writeb, ch, rb
|
|
mcr p14, 0, \ch, c1, c0, 0
|
|
.endm
|
|
#endif
|
|
|
|
#else
|
|
|
|
#include CONFIG_DEBUG_LL_INCLUDE
|
|
|
|
.macro writeb, ch, rb
|
|
senduart \ch, \rb
|
|
.endm
|
|
|
|
#if defined(CONFIG_ARCH_SA1100)
|
|
.macro loadsp, rb, tmp
|
|
mov \rb, #0x80000000 @ physical base address
|
|
#ifdef CONFIG_DEBUG_LL_SER3
|
|
add \rb, \rb, #0x00050000 @ Ser3
|
|
#else
|
|
add \rb, \rb, #0x00010000 @ Ser1
|
|
#endif
|
|
.endm
|
|
#else
|
|
.macro loadsp, rb, tmp
|
|
addruart \rb, \tmp
|
|
.endm
|
|
#endif
|
|
#endif
|
|
#endif
|
|
|
|
.macro kputc,val
|
|
mov r0, \val
|
|
bl putc
|
|
.endm
|
|
|
|
.macro kphex,val,len
|
|
mov r0, \val
|
|
mov r1, #\len
|
|
bl phex
|
|
.endm
|
|
|
|
.macro debug_reloc_start
|
|
#ifdef DEBUG
|
|
kputc #'\n'
|
|
kphex r6, 8 /* processor id */
|
|
kputc #':'
|
|
kphex r7, 8 /* architecture id */
|
|
#ifdef CONFIG_CPU_CP15
|
|
kputc #':'
|
|
mrc p15, 0, r0, c1, c0
|
|
kphex r0, 8 /* control reg */
|
|
#endif
|
|
kputc #'\n'
|
|
kphex r5, 8 /* decompressed kernel start */
|
|
kputc #'-'
|
|
kphex r9, 8 /* decompressed kernel end */
|
|
kputc #'>'
|
|
kphex r4, 8 /* kernel execution address */
|
|
kputc #'\n'
|
|
#endif
|
|
.endm
|
|
|
|
.macro debug_reloc_end
|
|
#ifdef DEBUG
|
|
kphex r5, 8 /* end of kernel */
|
|
kputc #'\n'
|
|
mov r0, r4
|
|
bl memdump /* dump 256 bytes at start of kernel */
|
|
#endif
|
|
.endm
|
|
|
|
.section ".start", #alloc, #execinstr
|
|
/*
|
|
* sort out different calling conventions
|
|
*/
|
|
.align
|
|
/*
|
|
* Always enter in ARM state for CPUs that support the ARM ISA.
|
|
* As of today (2014) that's exactly the members of the A and R
|
|
* classes.
|
|
*/
|
|
AR_CLASS( .arm )
|
|
start:
|
|
.type start,#function
|
|
.rept 7
|
|
__nop
|
|
.endr
|
|
ARM( mov r0, r0 )
|
|
ARM( b 1f )
|
|
THUMB( badr r12, 1f )
|
|
THUMB( bx r12 )
|
|
|
|
.word _magic_sig @ Magic numbers to help the loader
|
|
.word _magic_start @ absolute load/run zImage address
|
|
.word _magic_end @ zImage end address
|
|
.word 0x04030201 @ endianness flag
|
|
|
|
THUMB( .thumb )
|
|
1: __EFI_HEADER
|
|
|
|
ARM_BE8( setend be ) @ go BE8 if compiled for BE8
|
|
AR_CLASS( mrs r9, cpsr )
|
|
#ifdef CONFIG_ARM_VIRT_EXT
|
|
bl __hyp_stub_install @ get into SVC mode, reversibly
|
|
#endif
|
|
mov r7, r1 @ save architecture ID
|
|
mov r8, r2 @ save atags pointer
|
|
|
|
#ifndef CONFIG_CPU_V7M
|
|
/*
|
|
* Booting from Angel - need to enter SVC mode and disable
|
|
* FIQs/IRQs (numeric definitions from angel arm.h source).
|
|
* We only do this if we were in user mode on entry.
|
|
*/
|
|
mrs r2, cpsr @ get current mode
|
|
tst r2, #3 @ not user?
|
|
bne not_angel
|
|
mov r0, #0x17 @ angel_SWIreason_EnterSVC
|
|
ARM( swi 0x123456 ) @ angel_SWI_ARM
|
|
THUMB( svc 0xab ) @ angel_SWI_THUMB
|
|
not_angel:
|
|
safe_svcmode_maskall r0
|
|
msr spsr_cxsf, r9 @ Save the CPU boot mode in
|
|
@ SPSR
|
|
#endif
|
|
/*
|
|
* Note that some cache flushing and other stuff may
|
|
* be needed here - is there an Angel SWI call for this?
|
|
*/
|
|
|
|
/*
|
|
* some architecture specific code can be inserted
|
|
* by the linker here, but it should preserve r7, r8, and r9.
|
|
*/
|
|
|
|
.text
|
|
|
|
#ifdef CONFIG_AUTO_ZRELADDR
|
|
/*
|
|
* Find the start of physical memory. As we are executing
|
|
* without the MMU on, we are in the physical address space.
|
|
* We just need to get rid of any offset by aligning the
|
|
* address.
|
|
*
|
|
* This alignment is a balance between the requirements of
|
|
* different platforms - we have chosen 128MB to allow
|
|
* platforms which align the start of their physical memory
|
|
* to 128MB to use this feature, while allowing the zImage
|
|
* to be placed within the first 128MB of memory on other
|
|
* platforms. Increasing the alignment means we place
|
|
* stricter alignment requirements on the start of physical
|
|
* memory, but relaxing it means that we break people who
|
|
* are already placing their zImage in (eg) the top 64MB
|
|
* of this range.
|
|
*/
|
|
mov r4, pc
|
|
and r4, r4, #0xf8000000
|
|
/* Determine final kernel image address. */
|
|
add r4, r4, #TEXT_OFFSET
|
|
#else
|
|
ldr r4, =zreladdr
|
|
#endif
|
|
|
|
/*
|
|
* Set up a page table only if it won't overwrite ourself.
|
|
* That means r4 < pc || r4 - 16k page directory > &_end.
|
|
* Given that r4 > &_end is most unfrequent, we add a rough
|
|
* additional 1MB of room for a possible appended DTB.
|
|
*/
|
|
mov r0, pc
|
|
cmp r0, r4
|
|
ldrcc r0, LC0+32
|
|
addcc r0, r0, pc
|
|
cmpcc r4, r0
|
|
orrcc r4, r4, #1 @ remember we skipped cache_on
|
|
blcs cache_on
|
|
|
|
restart: adr r0, LC0
|
|
ldmia r0, {r1, r2, r3, r6, r10, r11, r12}
|
|
ldr sp, [r0, #28]
|
|
|
|
/*
|
|
* We might be running at a different address. We need
|
|
* to fix up various pointers.
|
|
*/
|
|
sub r0, r0, r1 @ calculate the delta offset
|
|
add r6, r6, r0 @ _edata
|
|
add r10, r10, r0 @ inflated kernel size location
|
|
|
|
/*
|
|
* The kernel build system appends the size of the
|
|
* decompressed kernel at the end of the compressed data
|
|
* in little-endian form.
|
|
*/
|
|
ldrb r9, [r10, #0]
|
|
ldrb lr, [r10, #1]
|
|
orr r9, r9, lr, lsl #8
|
|
ldrb lr, [r10, #2]
|
|
ldrb r10, [r10, #3]
|
|
orr r9, r9, lr, lsl #16
|
|
orr r9, r9, r10, lsl #24
|
|
|
|
#ifndef CONFIG_ZBOOT_ROM
|
|
/* malloc space is above the relocated stack (64k max) */
|
|
add sp, sp, r0
|
|
add r10, sp, #0x10000
|
|
#else
|
|
/*
|
|
* With ZBOOT_ROM the bss/stack is non relocatable,
|
|
* but someone could still run this code from RAM,
|
|
* in which case our reference is _edata.
|
|
*/
|
|
mov r10, r6
|
|
#endif
|
|
|
|
mov r5, #0 @ init dtb size to 0
|
|
#ifdef CONFIG_ARM_APPENDED_DTB
|
|
/*
|
|
* r0 = delta
|
|
* r2 = BSS start
|
|
* r3 = BSS end
|
|
* r4 = final kernel address (possibly with LSB set)
|
|
* r5 = appended dtb size (still unknown)
|
|
* r6 = _edata
|
|
* r7 = architecture ID
|
|
* r8 = atags/device tree pointer
|
|
* r9 = size of decompressed image
|
|
* r10 = end of this image, including bss/stack/malloc space if non XIP
|
|
* r11 = GOT start
|
|
* r12 = GOT end
|
|
* sp = stack pointer
|
|
*
|
|
* if there are device trees (dtb) appended to zImage, advance r10 so that the
|
|
* dtb data will get relocated along with the kernel if necessary.
|
|
*/
|
|
|
|
ldr lr, [r6, #0]
|
|
#ifndef __ARMEB__
|
|
ldr r1, =0xedfe0dd0 @ sig is 0xd00dfeed big endian
|
|
#else
|
|
ldr r1, =0xd00dfeed
|
|
#endif
|
|
cmp lr, r1
|
|
bne dtb_check_done @ not found
|
|
|
|
#ifdef CONFIG_ARM_ATAG_DTB_COMPAT
|
|
/*
|
|
* OK... Let's do some funky business here.
|
|
* If we do have a DTB appended to zImage, and we do have
|
|
* an ATAG list around, we want the later to be translated
|
|
* and folded into the former here. No GOT fixup has occurred
|
|
* yet, but none of the code we're about to call uses any
|
|
* global variable.
|
|
*/
|
|
|
|
/* Get the initial DTB size */
|
|
ldr r5, [r6, #4]
|
|
#ifndef __ARMEB__
|
|
/* convert to little endian */
|
|
eor r1, r5, r5, ror #16
|
|
bic r1, r1, #0x00ff0000
|
|
mov r5, r5, ror #8
|
|
eor r5, r5, r1, lsr #8
|
|
#endif
|
|
/* 50% DTB growth should be good enough */
|
|
add r5, r5, r5, lsr #1
|
|
/* preserve 64-bit alignment */
|
|
add r5, r5, #7
|
|
bic r5, r5, #7
|
|
/* clamp to 32KB min and 1MB max */
|
|
cmp r5, #(1 << 15)
|
|
movlo r5, #(1 << 15)
|
|
cmp r5, #(1 << 20)
|
|
movhi r5, #(1 << 20)
|
|
/* temporarily relocate the stack past the DTB work space */
|
|
add sp, sp, r5
|
|
|
|
stmfd sp!, {r0-r3, ip, lr}
|
|
mov r0, r8
|
|
mov r1, r6
|
|
mov r2, r5
|
|
bl atags_to_fdt
|
|
|
|
/*
|
|
* If returned value is 1, there is no ATAG at the location
|
|
* pointed by r8. Try the typical 0x100 offset from start
|
|
* of RAM and hope for the best.
|
|
*/
|
|
cmp r0, #1
|
|
sub r0, r4, #TEXT_OFFSET
|
|
bic r0, r0, #1
|
|
add r0, r0, #0x100
|
|
mov r1, r6
|
|
mov r2, r5
|
|
bleq atags_to_fdt
|
|
|
|
ldmfd sp!, {r0-r3, ip, lr}
|
|
sub sp, sp, r5
|
|
#endif
|
|
|
|
mov r8, r6 @ use the appended device tree
|
|
|
|
/*
|
|
* Make sure that the DTB doesn't end up in the final
|
|
* kernel's .bss area. To do so, we adjust the decompressed
|
|
* kernel size to compensate if that .bss size is larger
|
|
* than the relocated code.
|
|
*/
|
|
ldr r5, =_kernel_bss_size
|
|
adr r1, wont_overwrite
|
|
sub r1, r6, r1
|
|
subs r1, r5, r1
|
|
addhi r9, r9, r1
|
|
|
|
/* Get the current DTB size */
|
|
ldr r5, [r6, #4]
|
|
#ifndef __ARMEB__
|
|
/* convert r5 (dtb size) to little endian */
|
|
eor r1, r5, r5, ror #16
|
|
bic r1, r1, #0x00ff0000
|
|
mov r5, r5, ror #8
|
|
eor r5, r5, r1, lsr #8
|
|
#endif
|
|
|
|
/* preserve 64-bit alignment */
|
|
add r5, r5, #7
|
|
bic r5, r5, #7
|
|
|
|
/* relocate some pointers past the appended dtb */
|
|
add r6, r6, r5
|
|
add r10, r10, r5
|
|
add sp, sp, r5
|
|
dtb_check_done:
|
|
#endif
|
|
|
|
/*
|
|
* Check to see if we will overwrite ourselves.
|
|
* r4 = final kernel address (possibly with LSB set)
|
|
* r9 = size of decompressed image
|
|
* r10 = end of this image, including bss/stack/malloc space if non XIP
|
|
* We basically want:
|
|
* r4 - 16k page directory >= r10 -> OK
|
|
* r4 + image length <= address of wont_overwrite -> OK
|
|
* Note: the possible LSB in r4 is harmless here.
|
|
*/
|
|
add r10, r10, #16384
|
|
cmp r4, r10
|
|
bhs wont_overwrite
|
|
add r10, r4, r9
|
|
adr r9, wont_overwrite
|
|
cmp r10, r9
|
|
bls wont_overwrite
|
|
|
|
/*
|
|
* Relocate ourselves past the end of the decompressed kernel.
|
|
* r6 = _edata
|
|
* r10 = end of the decompressed kernel
|
|
* Because we always copy ahead, we need to do it from the end and go
|
|
* backward in case the source and destination overlap.
|
|
*/
|
|
/*
|
|
* Bump to the next 256-byte boundary with the size of
|
|
* the relocation code added. This avoids overwriting
|
|
* ourself when the offset is small.
|
|
*/
|
|
add r10, r10, #((reloc_code_end - restart + 256) & ~255)
|
|
bic r10, r10, #255
|
|
|
|
/* Get start of code we want to copy and align it down. */
|
|
adr r5, restart
|
|
bic r5, r5, #31
|
|
|
|
/* Relocate the hyp vector base if necessary */
|
|
#ifdef CONFIG_ARM_VIRT_EXT
|
|
mrs r0, spsr
|
|
and r0, r0, #MODE_MASK
|
|
cmp r0, #HYP_MODE
|
|
bne 1f
|
|
|
|
bl __hyp_get_vectors
|
|
sub r0, r0, r5
|
|
add r0, r0, r10
|
|
bl __hyp_set_vectors
|
|
1:
|
|
#endif
|
|
|
|
sub r9, r6, r5 @ size to copy
|
|
add r9, r9, #31 @ rounded up to a multiple
|
|
bic r9, r9, #31 @ ... of 32 bytes
|
|
add r6, r9, r5
|
|
add r9, r9, r10
|
|
|
|
1: ldmdb r6!, {r0 - r3, r10 - r12, lr}
|
|
cmp r6, r5
|
|
stmdb r9!, {r0 - r3, r10 - r12, lr}
|
|
bhi 1b
|
|
|
|
/* Preserve offset to relocated code. */
|
|
sub r6, r9, r6
|
|
|
|
#ifndef CONFIG_ZBOOT_ROM
|
|
/* cache_clean_flush may use the stack, so relocate it */
|
|
add sp, sp, r6
|
|
#endif
|
|
|
|
bl cache_clean_flush
|
|
|
|
badr r0, restart
|
|
add r0, r0, r6
|
|
mov pc, r0
|
|
|
|
wont_overwrite:
|
|
/*
|
|
* If delta is zero, we are running at the address we were linked at.
|
|
* r0 = delta
|
|
* r2 = BSS start
|
|
* r3 = BSS end
|
|
* r4 = kernel execution address (possibly with LSB set)
|
|
* r5 = appended dtb size (0 if not present)
|
|
* r7 = architecture ID
|
|
* r8 = atags pointer
|
|
* r11 = GOT start
|
|
* r12 = GOT end
|
|
* sp = stack pointer
|
|
*/
|
|
orrs r1, r0, r5
|
|
beq not_relocated
|
|
|
|
add r11, r11, r0
|
|
add r12, r12, r0
|
|
|
|
#ifndef CONFIG_ZBOOT_ROM
|
|
/*
|
|
* If we're running fully PIC === CONFIG_ZBOOT_ROM = n,
|
|
* we need to fix up pointers into the BSS region.
|
|
* Note that the stack pointer has already been fixed up.
|
|
*/
|
|
add r2, r2, r0
|
|
add r3, r3, r0
|
|
|
|
/*
|
|
* Relocate all entries in the GOT table.
|
|
* Bump bss entries to _edata + dtb size
|
|
*/
|
|
1: ldr r1, [r11, #0] @ relocate entries in the GOT
|
|
add r1, r1, r0 @ This fixes up C references
|
|
cmp r1, r2 @ if entry >= bss_start &&
|
|
cmphs r3, r1 @ bss_end > entry
|
|
addhi r1, r1, r5 @ entry += dtb size
|
|
str r1, [r11], #4 @ next entry
|
|
cmp r11, r12
|
|
blo 1b
|
|
|
|
/* bump our bss pointers too */
|
|
add r2, r2, r5
|
|
add r3, r3, r5
|
|
|
|
#else
|
|
|
|
/*
|
|
* Relocate entries in the GOT table. We only relocate
|
|
* the entries that are outside the (relocated) BSS region.
|
|
*/
|
|
1: ldr r1, [r11, #0] @ relocate entries in the GOT
|
|
cmp r1, r2 @ entry < bss_start ||
|
|
cmphs r3, r1 @ _end < entry
|
|
addlo r1, r1, r0 @ table. This fixes up the
|
|
str r1, [r11], #4 @ C references.
|
|
cmp r11, r12
|
|
blo 1b
|
|
#endif
|
|
|
|
not_relocated: mov r0, #0
|
|
1: str r0, [r2], #4 @ clear bss
|
|
str r0, [r2], #4
|
|
str r0, [r2], #4
|
|
str r0, [r2], #4
|
|
cmp r2, r3
|
|
blo 1b
|
|
|
|
/*
|
|
* Did we skip the cache setup earlier?
|
|
* That is indicated by the LSB in r4.
|
|
* Do it now if so.
|
|
*/
|
|
tst r4, #1
|
|
bic r4, r4, #1
|
|
blne cache_on
|
|
|
|
/*
|
|
* The C runtime environment should now be setup sufficiently.
|
|
* Set up some pointers, and start decompressing.
|
|
* r4 = kernel execution address
|
|
* r7 = architecture ID
|
|
* r8 = atags pointer
|
|
*/
|
|
mov r0, r4
|
|
mov r1, sp @ malloc space above stack
|
|
add r2, sp, #0x10000 @ 64k max
|
|
mov r3, r7
|
|
bl decompress_kernel
|
|
bl cache_clean_flush
|
|
bl cache_off
|
|
mov r1, r7 @ restore architecture number
|
|
mov r2, r8 @ restore atags pointer
|
|
|
|
#ifdef CONFIG_ARM_VIRT_EXT
|
|
mrs r0, spsr @ Get saved CPU boot mode
|
|
and r0, r0, #MODE_MASK
|
|
cmp r0, #HYP_MODE @ if not booted in HYP mode...
|
|
bne __enter_kernel @ boot kernel directly
|
|
|
|
adr r12, .L__hyp_reentry_vectors_offset
|
|
ldr r0, [r12]
|
|
add r0, r0, r12
|
|
|
|
bl __hyp_set_vectors
|
|
__HVC(0) @ otherwise bounce to hyp mode
|
|
|
|
b . @ should never be reached
|
|
|
|
.align 2
|
|
.L__hyp_reentry_vectors_offset: .long __hyp_reentry_vectors - .
|
|
#else
|
|
b __enter_kernel
|
|
#endif
|
|
|
|
.align 2
|
|
.type LC0, #object
|
|
LC0: .word LC0 @ r1
|
|
.word __bss_start @ r2
|
|
.word _end @ r3
|
|
.word _edata @ r6
|
|
.word input_data_end - 4 @ r10 (inflated size location)
|
|
.word _got_start @ r11
|
|
.word _got_end @ ip
|
|
.word .L_user_stack_end @ sp
|
|
.word _end - restart + 16384 + 1024*1024
|
|
.size LC0, . - LC0
|
|
|
|
#ifdef CONFIG_ARCH_RPC
|
|
.globl params
|
|
params: ldr r0, =0x10000100 @ params_phys for RPC
|
|
mov pc, lr
|
|
.ltorg
|
|
.align
|
|
#endif
|
|
|
|
/*
|
|
* Turn on the cache. We need to setup some page tables so that we
|
|
* can have both the I and D caches on.
|
|
*
|
|
* We place the page tables 16k down from the kernel execution address,
|
|
* and we hope that nothing else is using it. If we're using it, we
|
|
* will go pop!
|
|
*
|
|
* On entry,
|
|
* r4 = kernel execution address
|
|
* r7 = architecture number
|
|
* r8 = atags pointer
|
|
* On exit,
|
|
* r0, r1, r2, r3, r9, r10, r12 corrupted
|
|
* This routine must preserve:
|
|
* r4, r7, r8
|
|
*/
|
|
.align 5
|
|
cache_on: mov r3, #8 @ cache_on function
|
|
b call_cache_fn
|
|
|
|
/*
|
|
* Initialize the highest priority protection region, PR7
|
|
* to cover all 32bit address and cacheable and bufferable.
|
|
*/
|
|
__armv4_mpu_cache_on:
|
|
mov r0, #0x3f @ 4G, the whole
|
|
mcr p15, 0, r0, c6, c7, 0 @ PR7 Area Setting
|
|
mcr p15, 0, r0, c6, c7, 1
|
|
|
|
mov r0, #0x80 @ PR7
|
|
mcr p15, 0, r0, c2, c0, 0 @ D-cache on
|
|
mcr p15, 0, r0, c2, c0, 1 @ I-cache on
|
|
mcr p15, 0, r0, c3, c0, 0 @ write-buffer on
|
|
|
|
mov r0, #0xc000
|
|
mcr p15, 0, r0, c5, c0, 1 @ I-access permission
|
|
mcr p15, 0, r0, c5, c0, 0 @ D-access permission
|
|
|
|
mov r0, #0
|
|
mcr p15, 0, r0, c7, c10, 4 @ drain write buffer
|
|
mcr p15, 0, r0, c7, c5, 0 @ flush(inval) I-Cache
|
|
mcr p15, 0, r0, c7, c6, 0 @ flush(inval) D-Cache
|
|
mrc p15, 0, r0, c1, c0, 0 @ read control reg
|
|
@ ...I .... ..D. WC.M
|
|
orr r0, r0, #0x002d @ .... .... ..1. 11.1
|
|
orr r0, r0, #0x1000 @ ...1 .... .... ....
|
|
|
|
mcr p15, 0, r0, c1, c0, 0 @ write control reg
|
|
|
|
mov r0, #0
|
|
mcr p15, 0, r0, c7, c5, 0 @ flush(inval) I-Cache
|
|
mcr p15, 0, r0, c7, c6, 0 @ flush(inval) D-Cache
|
|
mov pc, lr
|
|
|
|
__armv3_mpu_cache_on:
|
|
mov r0, #0x3f @ 4G, the whole
|
|
mcr p15, 0, r0, c6, c7, 0 @ PR7 Area Setting
|
|
|
|
mov r0, #0x80 @ PR7
|
|
mcr p15, 0, r0, c2, c0, 0 @ cache on
|
|
mcr p15, 0, r0, c3, c0, 0 @ write-buffer on
|
|
|
|
mov r0, #0xc000
|
|
mcr p15, 0, r0, c5, c0, 0 @ access permission
|
|
|
|
mov r0, #0
|
|
mcr p15, 0, r0, c7, c0, 0 @ invalidate whole cache v3
|
|
/*
|
|
* ?? ARMv3 MMU does not allow reading the control register,
|
|
* does this really work on ARMv3 MPU?
|
|
*/
|
|
mrc p15, 0, r0, c1, c0, 0 @ read control reg
|
|
@ .... .... .... WC.M
|
|
orr r0, r0, #0x000d @ .... .... .... 11.1
|
|
/* ?? this overwrites the value constructed above? */
|
|
mov r0, #0
|
|
mcr p15, 0, r0, c1, c0, 0 @ write control reg
|
|
|
|
/* ?? invalidate for the second time? */
|
|
mcr p15, 0, r0, c7, c0, 0 @ invalidate whole cache v3
|
|
mov pc, lr
|
|
|
|
#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
|
|
#define CB_BITS 0x08
|
|
#else
|
|
#define CB_BITS 0x0c
|
|
#endif
|
|
|
|
__setup_mmu: sub r3, r4, #16384 @ Page directory size
|
|
bic r3, r3, #0xff @ Align the pointer
|
|
bic r3, r3, #0x3f00
|
|
/*
|
|
* Initialise the page tables, turning on the cacheable and bufferable
|
|
* bits for the RAM area only.
|
|
*/
|
|
mov r0, r3
|
|
mov r9, r0, lsr #18
|
|
mov r9, r9, lsl #18 @ start of RAM
|
|
add r10, r9, #0x10000000 @ a reasonable RAM size
|
|
mov r1, #0x12 @ XN|U + section mapping
|
|
orr r1, r1, #3 << 10 @ AP=11
|
|
add r2, r3, #16384
|
|
1: cmp r1, r9 @ if virt > start of RAM
|
|
cmphs r10, r1 @ && end of RAM > virt
|
|
bic r1, r1, #0x1c @ clear XN|U + C + B
|
|
orrlo r1, r1, #0x10 @ Set XN|U for non-RAM
|
|
orrhs r1, r1, r6 @ set RAM section settings
|
|
str r1, [r0], #4 @ 1:1 mapping
|
|
add r1, r1, #1048576
|
|
teq r0, r2
|
|
bne 1b
|
|
/*
|
|
* If ever we are running from Flash, then we surely want the cache
|
|
* to be enabled also for our execution instance... We map 2MB of it
|
|
* so there is no map overlap problem for up to 1 MB compressed kernel.
|
|
* If the execution is in RAM then we would only be duplicating the above.
|
|
*/
|
|
orr r1, r6, #0x04 @ ensure B is set for this
|
|
orr r1, r1, #3 << 10
|
|
mov r2, pc
|
|
mov r2, r2, lsr #20
|
|
orr r1, r1, r2, lsl #20
|
|
add r0, r3, r2, lsl #2
|
|
str r1, [r0], #4
|
|
add r1, r1, #1048576
|
|
str r1, [r0]
|
|
mov pc, lr
|
|
ENDPROC(__setup_mmu)
|
|
|
|
@ Enable unaligned access on v6, to allow better code generation
|
|
@ for the decompressor C code:
|
|
__armv6_mmu_cache_on:
|
|
mrc p15, 0, r0, c1, c0, 0 @ read SCTLR
|
|
bic r0, r0, #2 @ A (no unaligned access fault)
|
|
orr r0, r0, #1 << 22 @ U (v6 unaligned access model)
|
|
mcr p15, 0, r0, c1, c0, 0 @ write SCTLR
|
|
b __armv4_mmu_cache_on
|
|
|
|
__arm926ejs_mmu_cache_on:
|
|
#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
|
|
mov r0, #4 @ put dcache in WT mode
|
|
mcr p15, 7, r0, c15, c0, 0
|
|
#endif
|
|
|
|
__armv4_mmu_cache_on:
|
|
mov r12, lr
|
|
#ifdef CONFIG_MMU
|
|
mov r6, #CB_BITS | 0x12 @ U
|
|
bl __setup_mmu
|
|
mov r0, #0
|
|
mcr p15, 0, r0, c7, c10, 4 @ drain write buffer
|
|
mcr p15, 0, r0, c8, c7, 0 @ flush I,D TLBs
|
|
mrc p15, 0, r0, c1, c0, 0 @ read control reg
|
|
orr r0, r0, #0x5000 @ I-cache enable, RR cache replacement
|
|
orr r0, r0, #0x0030
|
|
ARM_BE8( orr r0, r0, #1 << 25 ) @ big-endian page tables
|
|
bl __common_mmu_cache_on
|
|
mov r0, #0
|
|
mcr p15, 0, r0, c8, c7, 0 @ flush I,D TLBs
|
|
#endif
|
|
mov pc, r12
|
|
|
|
__armv7_mmu_cache_on:
|
|
mov r12, lr
|
|
#ifdef CONFIG_MMU
|
|
mrc p15, 0, r11, c0, c1, 4 @ read ID_MMFR0
|
|
tst r11, #0xf @ VMSA
|
|
movne r6, #CB_BITS | 0x02 @ !XN
|
|
blne __setup_mmu
|
|
mov r0, #0
|
|
mcr p15, 0, r0, c7, c10, 4 @ drain write buffer
|
|
tst r11, #0xf @ VMSA
|
|
mcrne p15, 0, r0, c8, c7, 0 @ flush I,D TLBs
|
|
#endif
|
|
mrc p15, 0, r0, c1, c0, 0 @ read control reg
|
|
bic r0, r0, #1 << 28 @ clear SCTLR.TRE
|
|
orr r0, r0, #0x5000 @ I-cache enable, RR cache replacement
|
|
orr r0, r0, #0x003c @ write buffer
|
|
bic r0, r0, #2 @ A (no unaligned access fault)
|
|
orr r0, r0, #1 << 22 @ U (v6 unaligned access model)
|
|
@ (needed for ARM1176)
|
|
#ifdef CONFIG_MMU
|
|
ARM_BE8( orr r0, r0, #1 << 25 ) @ big-endian page tables
|
|
mrcne p15, 0, r6, c2, c0, 2 @ read ttb control reg
|
|
orrne r0, r0, #1 @ MMU enabled
|
|
movne r1, #0xfffffffd @ domain 0 = client
|
|
bic r6, r6, #1 << 31 @ 32-bit translation system
|
|
bic r6, r6, #3 << 0 @ use only ttbr0
|
|
mcrne p15, 0, r3, c2, c0, 0 @ load page table pointer
|
|
mcrne p15, 0, r1, c3, c0, 0 @ load domain access control
|
|
mcrne p15, 0, r6, c2, c0, 2 @ load ttb control
|
|
#endif
|
|
mcr p15, 0, r0, c7, c5, 4 @ ISB
|
|
mcr p15, 0, r0, c1, c0, 0 @ load control register
|
|
mrc p15, 0, r0, c1, c0, 0 @ and read it back
|
|
mov r0, #0
|
|
mcr p15, 0, r0, c7, c5, 4 @ ISB
|
|
mov pc, r12
|
|
|
|
__fa526_cache_on:
|
|
mov r12, lr
|
|
mov r6, #CB_BITS | 0x12 @ U
|
|
bl __setup_mmu
|
|
mov r0, #0
|
|
mcr p15, 0, r0, c7, c7, 0 @ Invalidate whole cache
|
|
mcr p15, 0, r0, c7, c10, 4 @ drain write buffer
|
|
mcr p15, 0, r0, c8, c7, 0 @ flush UTLB
|
|
mrc p15, 0, r0, c1, c0, 0 @ read control reg
|
|
orr r0, r0, #0x1000 @ I-cache enable
|
|
bl __common_mmu_cache_on
|
|
mov r0, #0
|
|
mcr p15, 0, r0, c8, c7, 0 @ flush UTLB
|
|
mov pc, r12
|
|
|
|
__common_mmu_cache_on:
|
|
#ifndef CONFIG_THUMB2_KERNEL
|
|
#ifndef DEBUG
|
|
orr r0, r0, #0x000d @ Write buffer, mmu
|
|
#endif
|
|
mov r1, #-1
|
|
mcr p15, 0, r3, c2, c0, 0 @ load page table pointer
|
|
mcr p15, 0, r1, c3, c0, 0 @ load domain access control
|
|
b 1f
|
|
.align 5 @ cache line aligned
|
|
1: mcr p15, 0, r0, c1, c0, 0 @ load control register
|
|
mrc p15, 0, r0, c1, c0, 0 @ and read it back to
|
|
sub pc, lr, r0, lsr #32 @ properly flush pipeline
|
|
#endif
|
|
|
|
#define PROC_ENTRY_SIZE (4*5)
|
|
|
|
/*
|
|
* Here follow the relocatable cache support functions for the
|
|
* various processors. This is a generic hook for locating an
|
|
* entry and jumping to an instruction at the specified offset
|
|
* from the start of the block. Please note this is all position
|
|
* independent code.
|
|
*
|
|
* r1 = corrupted
|
|
* r2 = corrupted
|
|
* r3 = block offset
|
|
* r9 = corrupted
|
|
* r12 = corrupted
|
|
*/
|
|
|
|
call_cache_fn: adr r12, proc_types
|
|
#ifdef CONFIG_CPU_CP15
|
|
mrc p15, 0, r9, c0, c0 @ get processor ID
|
|
#elif defined(CONFIG_CPU_V7M)
|
|
/*
|
|
* On v7-M the processor id is located in the V7M_SCB_CPUID
|
|
* register, but as cache handling is IMPLEMENTATION DEFINED on
|
|
* v7-M (if existant at all) we just return early here.
|
|
* If V7M_SCB_CPUID were used the cpu ID functions (i.e.
|
|
* __armv7_mmu_cache_{on,off,flush}) would be selected which
|
|
* use cp15 registers that are not implemented on v7-M.
|
|
*/
|
|
bx lr
|
|
#else
|
|
ldr r9, =CONFIG_PROCESSOR_ID
|
|
#endif
|
|
1: ldr r1, [r12, #0] @ get value
|
|
ldr r2, [r12, #4] @ get mask
|
|
eor r1, r1, r9 @ (real ^ match)
|
|
tst r1, r2 @ & mask
|
|
ARM( addeq pc, r12, r3 ) @ call cache function
|
|
THUMB( addeq r12, r3 )
|
|
THUMB( moveq pc, r12 ) @ call cache function
|
|
add r12, r12, #PROC_ENTRY_SIZE
|
|
b 1b
|
|
|
|
/*
|
|
* Table for cache operations. This is basically:
|
|
* - CPU ID match
|
|
* - CPU ID mask
|
|
* - 'cache on' method instruction
|
|
* - 'cache off' method instruction
|
|
* - 'cache flush' method instruction
|
|
*
|
|
* We match an entry using: ((real_id ^ match) & mask) == 0
|
|
*
|
|
* Writethrough caches generally only need 'on' and 'off'
|
|
* methods. Writeback caches _must_ have the flush method
|
|
* defined.
|
|
*/
|
|
.align 2
|
|
.type proc_types,#object
|
|
proc_types:
|
|
.word 0x41000000 @ old ARM ID
|
|
.word 0xff00f000
|
|
mov pc, lr
|
|
THUMB( nop )
|
|
mov pc, lr
|
|
THUMB( nop )
|
|
mov pc, lr
|
|
THUMB( nop )
|
|
|
|
.word 0x41007000 @ ARM7/710
|
|
.word 0xfff8fe00
|
|
mov pc, lr
|
|
THUMB( nop )
|
|
mov pc, lr
|
|
THUMB( nop )
|
|
mov pc, lr
|
|
THUMB( nop )
|
|
|
|
.word 0x41807200 @ ARM720T (writethrough)
|
|
.word 0xffffff00
|
|
W(b) __armv4_mmu_cache_on
|
|
W(b) __armv4_mmu_cache_off
|
|
mov pc, lr
|
|
THUMB( nop )
|
|
|
|
.word 0x41007400 @ ARM74x
|
|
.word 0xff00ff00
|
|
W(b) __armv3_mpu_cache_on
|
|
W(b) __armv3_mpu_cache_off
|
|
W(b) __armv3_mpu_cache_flush
|
|
|
|
.word 0x41009400 @ ARM94x
|
|
.word 0xff00ff00
|
|
W(b) __armv4_mpu_cache_on
|
|
W(b) __armv4_mpu_cache_off
|
|
W(b) __armv4_mpu_cache_flush
|
|
|
|
.word 0x41069260 @ ARM926EJ-S (v5TEJ)
|
|
.word 0xff0ffff0
|
|
W(b) __arm926ejs_mmu_cache_on
|
|
W(b) __armv4_mmu_cache_off
|
|
W(b) __armv5tej_mmu_cache_flush
|
|
|
|
.word 0x00007000 @ ARM7 IDs
|
|
.word 0x0000f000
|
|
mov pc, lr
|
|
THUMB( nop )
|
|
mov pc, lr
|
|
THUMB( nop )
|
|
mov pc, lr
|
|
THUMB( nop )
|
|
|
|
@ Everything from here on will be the new ID system.
|
|
|
|
.word 0x4401a100 @ sa110 / sa1100
|
|
.word 0xffffffe0
|
|
W(b) __armv4_mmu_cache_on
|
|
W(b) __armv4_mmu_cache_off
|
|
W(b) __armv4_mmu_cache_flush
|
|
|
|
.word 0x6901b110 @ sa1110
|
|
.word 0xfffffff0
|
|
W(b) __armv4_mmu_cache_on
|
|
W(b) __armv4_mmu_cache_off
|
|
W(b) __armv4_mmu_cache_flush
|
|
|
|
.word 0x56056900
|
|
.word 0xffffff00 @ PXA9xx
|
|
W(b) __armv4_mmu_cache_on
|
|
W(b) __armv4_mmu_cache_off
|
|
W(b) __armv4_mmu_cache_flush
|
|
|
|
.word 0x56158000 @ PXA168
|
|
.word 0xfffff000
|
|
W(b) __armv4_mmu_cache_on
|
|
W(b) __armv4_mmu_cache_off
|
|
W(b) __armv5tej_mmu_cache_flush
|
|
|
|
.word 0x56050000 @ Feroceon
|
|
.word 0xff0f0000
|
|
W(b) __armv4_mmu_cache_on
|
|
W(b) __armv4_mmu_cache_off
|
|
W(b) __armv5tej_mmu_cache_flush
|
|
|
|
#ifdef CONFIG_CPU_FEROCEON_OLD_ID
|
|
/* this conflicts with the standard ARMv5TE entry */
|
|
.long 0x41009260 @ Old Feroceon
|
|
.long 0xff00fff0
|
|
b __armv4_mmu_cache_on
|
|
b __armv4_mmu_cache_off
|
|
b __armv5tej_mmu_cache_flush
|
|
#endif
|
|
|
|
.word 0x66015261 @ FA526
|
|
.word 0xff01fff1
|
|
W(b) __fa526_cache_on
|
|
W(b) __armv4_mmu_cache_off
|
|
W(b) __fa526_cache_flush
|
|
|
|
@ These match on the architecture ID
|
|
|
|
.word 0x00020000 @ ARMv4T
|
|
.word 0x000f0000
|
|
W(b) __armv4_mmu_cache_on
|
|
W(b) __armv4_mmu_cache_off
|
|
W(b) __armv4_mmu_cache_flush
|
|
|
|
.word 0x00050000 @ ARMv5TE
|
|
.word 0x000f0000
|
|
W(b) __armv4_mmu_cache_on
|
|
W(b) __armv4_mmu_cache_off
|
|
W(b) __armv4_mmu_cache_flush
|
|
|
|
.word 0x00060000 @ ARMv5TEJ
|
|
.word 0x000f0000
|
|
W(b) __armv4_mmu_cache_on
|
|
W(b) __armv4_mmu_cache_off
|
|
W(b) __armv5tej_mmu_cache_flush
|
|
|
|
.word 0x0007b000 @ ARMv6
|
|
.word 0x000ff000
|
|
W(b) __armv6_mmu_cache_on
|
|
W(b) __armv4_mmu_cache_off
|
|
W(b) __armv6_mmu_cache_flush
|
|
|
|
.word 0x000f0000 @ new CPU Id
|
|
.word 0x000f0000
|
|
W(b) __armv7_mmu_cache_on
|
|
W(b) __armv7_mmu_cache_off
|
|
W(b) __armv7_mmu_cache_flush
|
|
|
|
.word 0 @ unrecognised type
|
|
.word 0
|
|
mov pc, lr
|
|
THUMB( nop )
|
|
mov pc, lr
|
|
THUMB( nop )
|
|
mov pc, lr
|
|
THUMB( nop )
|
|
|
|
.size proc_types, . - proc_types
|
|
|
|
/*
|
|
* If you get a "non-constant expression in ".if" statement"
|
|
* error from the assembler on this line, check that you have
|
|
* not accidentally written a "b" instruction where you should
|
|
* have written W(b).
|
|
*/
|
|
.if (. - proc_types) % PROC_ENTRY_SIZE != 0
|
|
.error "The size of one or more proc_types entries is wrong."
|
|
.endif
|
|
|
|
/*
|
|
* Turn off the Cache and MMU. ARMv3 does not support
|
|
* reading the control register, but ARMv4 does.
|
|
*
|
|
* On exit,
|
|
* r0, r1, r2, r3, r9, r12 corrupted
|
|
* This routine must preserve:
|
|
* r4, r7, r8
|
|
*/
|
|
.align 5
|
|
cache_off: mov r3, #12 @ cache_off function
|
|
b call_cache_fn
|
|
|
|
__armv4_mpu_cache_off:
|
|
mrc p15, 0, r0, c1, c0
|
|
bic r0, r0, #0x000d
|
|
mcr p15, 0, r0, c1, c0 @ turn MPU and cache off
|
|
mov r0, #0
|
|
mcr p15, 0, r0, c7, c10, 4 @ drain write buffer
|
|
mcr p15, 0, r0, c7, c6, 0 @ flush D-Cache
|
|
mcr p15, 0, r0, c7, c5, 0 @ flush I-Cache
|
|
mov pc, lr
|
|
|
|
__armv3_mpu_cache_off:
|
|
mrc p15, 0, r0, c1, c0
|
|
bic r0, r0, #0x000d
|
|
mcr p15, 0, r0, c1, c0, 0 @ turn MPU and cache off
|
|
mov r0, #0
|
|
mcr p15, 0, r0, c7, c0, 0 @ invalidate whole cache v3
|
|
mov pc, lr
|
|
|
|
__armv4_mmu_cache_off:
|
|
#ifdef CONFIG_MMU
|
|
mrc p15, 0, r0, c1, c0
|
|
bic r0, r0, #0x000d
|
|
mcr p15, 0, r0, c1, c0 @ turn MMU and cache off
|
|
mov r0, #0
|
|
mcr p15, 0, r0, c7, c7 @ invalidate whole cache v4
|
|
mcr p15, 0, r0, c8, c7 @ invalidate whole TLB v4
|
|
#endif
|
|
mov pc, lr
|
|
|
|
__armv7_mmu_cache_off:
|
|
mrc p15, 0, r0, c1, c0
|
|
#ifdef CONFIG_MMU
|
|
bic r0, r0, #0x000d
|
|
#else
|
|
bic r0, r0, #0x000c
|
|
#endif
|
|
mcr p15, 0, r0, c1, c0 @ turn MMU and cache off
|
|
mov r12, lr
|
|
bl __armv7_mmu_cache_flush
|
|
mov r0, #0
|
|
#ifdef CONFIG_MMU
|
|
mcr p15, 0, r0, c8, c7, 0 @ invalidate whole TLB
|
|
#endif
|
|
mcr p15, 0, r0, c7, c5, 6 @ invalidate BTC
|
|
mcr p15, 0, r0, c7, c10, 4 @ DSB
|
|
mcr p15, 0, r0, c7, c5, 4 @ ISB
|
|
mov pc, r12
|
|
|
|
/*
|
|
* Clean and flush the cache to maintain consistency.
|
|
*
|
|
* On exit,
|
|
* r1, r2, r3, r9, r10, r11, r12 corrupted
|
|
* This routine must preserve:
|
|
* r4, r6, r7, r8
|
|
*/
|
|
.align 5
|
|
cache_clean_flush:
|
|
mov r3, #16
|
|
b call_cache_fn
|
|
|
|
__armv4_mpu_cache_flush:
|
|
tst r4, #1
|
|
movne pc, lr
|
|
mov r2, #1
|
|
mov r3, #0
|
|
mcr p15, 0, ip, c7, c6, 0 @ invalidate D cache
|
|
mov r1, #7 << 5 @ 8 segments
|
|
1: orr r3, r1, #63 << 26 @ 64 entries
|
|
2: mcr p15, 0, r3, c7, c14, 2 @ clean & invalidate D index
|
|
subs r3, r3, #1 << 26
|
|
bcs 2b @ entries 63 to 0
|
|
subs r1, r1, #1 << 5
|
|
bcs 1b @ segments 7 to 0
|
|
|
|
teq r2, #0
|
|
mcrne p15, 0, ip, c7, c5, 0 @ invalidate I cache
|
|
mcr p15, 0, ip, c7, c10, 4 @ drain WB
|
|
mov pc, lr
|
|
|
|
__fa526_cache_flush:
|
|
tst r4, #1
|
|
movne pc, lr
|
|
mov r1, #0
|
|
mcr p15, 0, r1, c7, c14, 0 @ clean and invalidate D cache
|
|
mcr p15, 0, r1, c7, c5, 0 @ flush I cache
|
|
mcr p15, 0, r1, c7, c10, 4 @ drain WB
|
|
mov pc, lr
|
|
|
|
__armv6_mmu_cache_flush:
|
|
mov r1, #0
|
|
tst r4, #1
|
|
mcreq p15, 0, r1, c7, c14, 0 @ clean+invalidate D
|
|
mcr p15, 0, r1, c7, c5, 0 @ invalidate I+BTB
|
|
mcreq p15, 0, r1, c7, c15, 0 @ clean+invalidate unified
|
|
mcr p15, 0, r1, c7, c10, 4 @ drain WB
|
|
mov pc, lr
|
|
|
|
__armv7_mmu_cache_flush:
|
|
tst r4, #1
|
|
bne iflush
|
|
mrc p15, 0, r10, c0, c1, 5 @ read ID_MMFR1
|
|
tst r10, #0xf << 16 @ hierarchical cache (ARMv7)
|
|
mov r10, #0
|
|
beq hierarchical
|
|
mcr p15, 0, r10, c7, c14, 0 @ clean+invalidate D
|
|
b iflush
|
|
hierarchical:
|
|
mcr p15, 0, r10, c7, c10, 5 @ DMB
|
|
stmfd sp!, {r0-r7, r9-r11}
|
|
mrc p15, 1, r0, c0, c0, 1 @ read clidr
|
|
ands r3, r0, #0x7000000 @ extract loc from clidr
|
|
mov r3, r3, lsr #23 @ left align loc bit field
|
|
beq finished @ if loc is 0, then no need to clean
|
|
mov r10, #0 @ start clean at cache level 0
|
|
loop1:
|
|
add r2, r10, r10, lsr #1 @ work out 3x current cache level
|
|
mov r1, r0, lsr r2 @ extract cache type bits from clidr
|
|
and r1, r1, #7 @ mask of the bits for current cache only
|
|
cmp r1, #2 @ see what cache we have at this level
|
|
blt skip @ skip if no cache, or just i-cache
|
|
mcr p15, 2, r10, c0, c0, 0 @ select current cache level in cssr
|
|
mcr p15, 0, r10, c7, c5, 4 @ isb to sych the new cssr&csidr
|
|
mrc p15, 1, r1, c0, c0, 0 @ read the new csidr
|
|
and r2, r1, #7 @ extract the length of the cache lines
|
|
add r2, r2, #4 @ add 4 (line length offset)
|
|
ldr r4, =0x3ff
|
|
ands r4, r4, r1, lsr #3 @ find maximum number on the way size
|
|
clz r5, r4 @ find bit position of way size increment
|
|
ldr r7, =0x7fff
|
|
ands r7, r7, r1, lsr #13 @ extract max number of the index size
|
|
loop2:
|
|
mov r9, r4 @ create working copy of max way size
|
|
loop3:
|
|
ARM( orr r11, r10, r9, lsl r5 ) @ factor way and cache number into r11
|
|
ARM( orr r11, r11, r7, lsl r2 ) @ factor index number into r11
|
|
THUMB( lsl r6, r9, r5 )
|
|
THUMB( orr r11, r10, r6 ) @ factor way and cache number into r11
|
|
THUMB( lsl r6, r7, r2 )
|
|
THUMB( orr r11, r11, r6 ) @ factor index number into r11
|
|
mcr p15, 0, r11, c7, c14, 2 @ clean & invalidate by set/way
|
|
subs r9, r9, #1 @ decrement the way
|
|
bge loop3
|
|
subs r7, r7, #1 @ decrement the index
|
|
bge loop2
|
|
skip:
|
|
add r10, r10, #2 @ increment cache number
|
|
cmp r3, r10
|
|
bgt loop1
|
|
finished:
|
|
ldmfd sp!, {r0-r7, r9-r11}
|
|
mov r10, #0 @ swith back to cache level 0
|
|
mcr p15, 2, r10, c0, c0, 0 @ select current cache level in cssr
|
|
iflush:
|
|
mcr p15, 0, r10, c7, c10, 4 @ DSB
|
|
mcr p15, 0, r10, c7, c5, 0 @ invalidate I+BTB
|
|
mcr p15, 0, r10, c7, c10, 4 @ DSB
|
|
mcr p15, 0, r10, c7, c5, 4 @ ISB
|
|
mov pc, lr
|
|
|
|
__armv5tej_mmu_cache_flush:
|
|
tst r4, #1
|
|
movne pc, lr
|
|
1: mrc p15, 0, r15, c7, c14, 3 @ test,clean,invalidate D cache
|
|
bne 1b
|
|
mcr p15, 0, r0, c7, c5, 0 @ flush I cache
|
|
mcr p15, 0, r0, c7, c10, 4 @ drain WB
|
|
mov pc, lr
|
|
|
|
__armv4_mmu_cache_flush:
|
|
tst r4, #1
|
|
movne pc, lr
|
|
mov r2, #64*1024 @ default: 32K dcache size (*2)
|
|
mov r11, #32 @ default: 32 byte line size
|
|
mrc p15, 0, r3, c0, c0, 1 @ read cache type
|
|
teq r3, r9 @ cache ID register present?
|
|
beq no_cache_id
|
|
mov r1, r3, lsr #18
|
|
and r1, r1, #7
|
|
mov r2, #1024
|
|
mov r2, r2, lsl r1 @ base dcache size *2
|
|
tst r3, #1 << 14 @ test M bit
|
|
addne r2, r2, r2, lsr #1 @ +1/2 size if M == 1
|
|
mov r3, r3, lsr #12
|
|
and r3, r3, #3
|
|
mov r11, #8
|
|
mov r11, r11, lsl r3 @ cache line size in bytes
|
|
no_cache_id:
|
|
mov r1, pc
|
|
bic r1, r1, #63 @ align to longest cache line
|
|
add r2, r1, r2
|
|
1:
|
|
ARM( ldr r3, [r1], r11 ) @ s/w flush D cache
|
|
THUMB( ldr r3, [r1] ) @ s/w flush D cache
|
|
THUMB( add r1, r1, r11 )
|
|
teq r1, r2
|
|
bne 1b
|
|
|
|
mcr p15, 0, r1, c7, c5, 0 @ flush I cache
|
|
mcr p15, 0, r1, c7, c6, 0 @ flush D cache
|
|
mcr p15, 0, r1, c7, c10, 4 @ drain WB
|
|
mov pc, lr
|
|
|
|
__armv3_mmu_cache_flush:
|
|
__armv3_mpu_cache_flush:
|
|
tst r4, #1
|
|
movne pc, lr
|
|
mov r1, #0
|
|
mcr p15, 0, r1, c7, c0, 0 @ invalidate whole cache v3
|
|
mov pc, lr
|
|
|
|
/*
|
|
* Various debugging routines for printing hex characters and
|
|
* memory, which again must be relocatable.
|
|
*/
|
|
#ifdef DEBUG
|
|
.align 2
|
|
.type phexbuf,#object
|
|
phexbuf: .space 12
|
|
.size phexbuf, . - phexbuf
|
|
|
|
@ phex corrupts {r0, r1, r2, r3}
|
|
phex: adr r3, phexbuf
|
|
mov r2, #0
|
|
strb r2, [r3, r1]
|
|
1: subs r1, r1, #1
|
|
movmi r0, r3
|
|
bmi puts
|
|
and r2, r0, #15
|
|
mov r0, r0, lsr #4
|
|
cmp r2, #10
|
|
addge r2, r2, #7
|
|
add r2, r2, #'0'
|
|
strb r2, [r3, r1]
|
|
b 1b
|
|
|
|
@ puts corrupts {r0, r1, r2, r3}
|
|
puts: loadsp r3, r1
|
|
1: ldrb r2, [r0], #1
|
|
teq r2, #0
|
|
moveq pc, lr
|
|
2: writeb r2, r3
|
|
mov r1, #0x00020000
|
|
3: subs r1, r1, #1
|
|
bne 3b
|
|
teq r2, #'\n'
|
|
moveq r2, #'\r'
|
|
beq 2b
|
|
teq r0, #0
|
|
bne 1b
|
|
mov pc, lr
|
|
@ putc corrupts {r0, r1, r2, r3}
|
|
putc:
|
|
mov r2, r0
|
|
mov r0, #0
|
|
loadsp r3, r1
|
|
b 2b
|
|
|
|
@ memdump corrupts {r0, r1, r2, r3, r10, r11, r12, lr}
|
|
memdump: mov r12, r0
|
|
mov r10, lr
|
|
mov r11, #0
|
|
2: mov r0, r11, lsl #2
|
|
add r0, r0, r12
|
|
mov r1, #8
|
|
bl phex
|
|
mov r0, #':'
|
|
bl putc
|
|
1: mov r0, #' '
|
|
bl putc
|
|
ldr r0, [r12, r11, lsl #2]
|
|
mov r1, #8
|
|
bl phex
|
|
and r0, r11, #7
|
|
teq r0, #3
|
|
moveq r0, #' '
|
|
bleq putc
|
|
and r0, r11, #7
|
|
add r11, r11, #1
|
|
teq r0, #7
|
|
bne 1b
|
|
mov r0, #'\n'
|
|
bl putc
|
|
cmp r11, #64
|
|
blt 2b
|
|
mov pc, r10
|
|
#endif
|
|
|
|
.ltorg
|
|
|
|
#ifdef CONFIG_ARM_VIRT_EXT
|
|
.align 5
|
|
__hyp_reentry_vectors:
|
|
W(b) . @ reset
|
|
W(b) . @ undef
|
|
W(b) . @ svc
|
|
W(b) . @ pabort
|
|
W(b) . @ dabort
|
|
W(b) __enter_kernel @ hyp
|
|
W(b) . @ irq
|
|
W(b) . @ fiq
|
|
#endif /* CONFIG_ARM_VIRT_EXT */
|
|
|
|
__enter_kernel:
|
|
mov r0, #0 @ must be 0
|
|
ARM( mov pc, r4 ) @ call kernel
|
|
M_CLASS( add r4, r4, #1 ) @ enter in Thumb mode for M class
|
|
THUMB( bx r4 ) @ entry point is always ARM for A/R classes
|
|
|
|
reloc_code_end:
|
|
|
|
#ifdef CONFIG_EFI_STUB
|
|
.align 2
|
|
_start: .long start - .
|
|
|
|
ENTRY(efi_stub_entry)
|
|
@ allocate space on stack for passing current zImage address
|
|
@ and for the EFI stub to return of new entry point of
|
|
@ zImage, as EFI stub may copy the kernel. Pointer address
|
|
@ is passed in r2. r0 and r1 are passed through from the
|
|
@ EFI firmware to efi_entry
|
|
adr ip, _start
|
|
ldr r3, [ip]
|
|
add r3, r3, ip
|
|
stmfd sp!, {r3, lr}
|
|
mov r2, sp @ pass zImage address in r2
|
|
bl efi_entry
|
|
|
|
@ Check for error return from EFI stub. r0 has FDT address
|
|
@ or error code.
|
|
cmn r0, #1
|
|
beq efi_load_fail
|
|
|
|
@ Preserve return value of efi_entry() in r4
|
|
mov r4, r0
|
|
bl cache_clean_flush
|
|
bl cache_off
|
|
|
|
@ Set parameters for booting zImage according to boot protocol
|
|
@ put FDT address in r2, it was returned by efi_entry()
|
|
@ r1 is the machine type, and r0 needs to be 0
|
|
mov r0, #0
|
|
mov r1, #0xFFFFFFFF
|
|
mov r2, r4
|
|
|
|
@ Branch to (possibly) relocated zImage that is in [sp]
|
|
ldr lr, [sp]
|
|
ldr ip, =start_offset
|
|
add lr, lr, ip
|
|
mov pc, lr @ no mode switch
|
|
|
|
efi_load_fail:
|
|
@ Return EFI_LOAD_ERROR to EFI firmware on error.
|
|
ldr r0, =0x80000001
|
|
ldmfd sp!, {ip, pc}
|
|
ENDPROC(efi_stub_entry)
|
|
#endif
|
|
|
|
.align
|
|
.section ".stack", "aw", %nobits
|
|
.L_user_stack: .space 4096
|
|
.L_user_stack_end:
|