mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-19 02:04:19 +08:00
bfce552d0b
This patch moves Exynos PMU driver implementation from "arm/mach-exynos" to "drivers/soc/samsung". This driver is mainly used for setting misc bits of register from PMU IP of Exynos SoC which will be required to configure before Suspend/Resume. Currently all these settings are done in "arch/arm/mach-exynos/pmu.c" but moving ahead for ARM64 based SoC support, there is a need of this PMU driver in driver/* folder. This driver uses existing DT binding information and there should be no functionality change in the supported platforms. Signed-off-by: Amit Daniel Kachhap <amitdanielk@gmail.com> [tested on Peach-Pi (Exynos5880)] Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> [for testing on Trats2 (Exynos4412) and Odroid XU3 (Exynos5422)] Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> [k.kozlowski: Rebased, add necessary infrastructure for building and selecting drivers/soc because original patchset was on top of movement SROMc to drivers/soc] Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
176 lines
7.3 KiB
C
176 lines
7.3 KiB
C
/*
|
|
* Copyright (c) 2011-2015 Samsung Electronics Co., Ltd.
|
|
* http://www.samsung.com/
|
|
*
|
|
* EXYNOS3250 - CPU PMU (Power Management Unit) support
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/soc/samsung/exynos-regs-pmu.h>
|
|
#include <linux/soc/samsung/exynos-pmu.h>
|
|
|
|
#include "exynos-pmu.h"
|
|
|
|
static struct exynos_pmu_conf exynos3250_pmu_config[] = {
|
|
/* { .offset = offset, .val = { AFTR, W-AFTR, SLEEP } */
|
|
{ EXYNOS3_ARM_CORE0_SYS_PWR_REG, { 0x0, 0x0, 0x2} },
|
|
{ EXYNOS3_DIS_IRQ_ARM_CORE0_LOCAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
|
|
{ EXYNOS3_DIS_IRQ_ARM_CORE0_CENTRAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
|
|
{ EXYNOS3_ARM_CORE1_SYS_PWR_REG, { 0x0, 0x0, 0x2} },
|
|
{ EXYNOS3_DIS_IRQ_ARM_CORE1_LOCAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
|
|
{ EXYNOS3_DIS_IRQ_ARM_CORE1_CENTRAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
|
|
{ EXYNOS3_ISP_ARM_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
|
|
{ EXYNOS3_DIS_IRQ_ISP_ARM_LOCAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
|
|
{ EXYNOS3_DIS_IRQ_ISP_ARM_CENTRAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
|
|
{ EXYNOS3_ARM_COMMON_SYS_PWR_REG, { 0x0, 0x0, 0x2} },
|
|
{ EXYNOS3_ARM_L2_SYS_PWR_REG, { 0x0, 0x0, 0x3} },
|
|
{ EXYNOS3_CMU_ACLKSTOP_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
|
|
{ EXYNOS3_CMU_SCLKSTOP_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
|
|
{ EXYNOS3_CMU_RESET_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
|
|
{ EXYNOS3_DRAM_FREQ_DOWN_SYS_PWR_REG, { 0x1, 0x1, 0x1} },
|
|
{ EXYNOS3_DDRPHY_DLLOFF_SYS_PWR_REG, { 0x1, 0x1, 0x1} },
|
|
{ EXYNOS3_LPDDR_PHY_DLL_LOCK_SYS_PWR_REG, { 0x1, 0x1, 0x1} },
|
|
{ EXYNOS3_CMU_ACLKSTOP_COREBLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
|
|
{ EXYNOS3_CMU_SCLKSTOP_COREBLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
|
|
{ EXYNOS3_CMU_RESET_COREBLK_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
|
|
{ EXYNOS3_APLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
|
|
{ EXYNOS3_MPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
|
|
{ EXYNOS3_BPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
|
|
{ EXYNOS3_VPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
|
|
{ EXYNOS3_EPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
|
|
{ EXYNOS3_UPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x1, 0x1} },
|
|
{ EXYNOS3_EPLLUSER_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
|
|
{ EXYNOS3_MPLLUSER_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
|
|
{ EXYNOS3_BPLLUSER_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
|
|
{ EXYNOS3_CMU_CLKSTOP_CAM_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
|
|
{ EXYNOS3_CMU_CLKSTOP_MFC_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
|
|
{ EXYNOS3_CMU_CLKSTOP_G3D_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
|
|
{ EXYNOS3_CMU_CLKSTOP_LCD0_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
|
|
{ EXYNOS3_CMU_CLKSTOP_ISP_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
|
|
{ EXYNOS3_CMU_CLKSTOP_MAUDIO_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
|
|
{ EXYNOS3_CMU_RESET_CAM_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
|
|
{ EXYNOS3_CMU_RESET_MFC_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
|
|
{ EXYNOS3_CMU_RESET_G3D_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
|
|
{ EXYNOS3_CMU_RESET_LCD0_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
|
|
{ EXYNOS3_CMU_RESET_ISP_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
|
|
{ EXYNOS3_CMU_RESET_MAUDIO_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
|
|
{ EXYNOS3_TOP_BUS_SYS_PWR_REG, { 0x3, 0x0, 0x0} },
|
|
{ EXYNOS3_TOP_RETENTION_SYS_PWR_REG, { 0x1, 0x1, 0x1} },
|
|
{ EXYNOS3_TOP_PWR_SYS_PWR_REG, { 0x3, 0x3, 0x3} },
|
|
{ EXYNOS3_TOP_BUS_COREBLK_SYS_PWR_REG, { 0x3, 0x0, 0x0} },
|
|
{ EXYNOS3_TOP_RETENTION_COREBLK_SYS_PWR_REG, { 0x1, 0x1, 0x1} },
|
|
{ EXYNOS3_TOP_PWR_COREBLK_SYS_PWR_REG, { 0x3, 0x3, 0x3} },
|
|
{ EXYNOS3_LOGIC_RESET_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
|
|
{ EXYNOS3_OSCCLK_GATE_SYS_PWR_REG, { 0x1, 0x1, 0x1} },
|
|
{ EXYNOS3_LOGIC_RESET_COREBLK_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
|
|
{ EXYNOS3_OSCCLK_GATE_COREBLK_SYS_PWR_REG, { 0x1, 0x0, 0x1} },
|
|
{ EXYNOS3_PAD_RETENTION_DRAM_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
|
|
{ EXYNOS3_PAD_RETENTION_MAUDIO_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
|
|
{ EXYNOS3_PAD_RETENTION_GPIO_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
|
|
{ EXYNOS3_PAD_RETENTION_UART_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
|
|
{ EXYNOS3_PAD_RETENTION_MMC0_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
|
|
{ EXYNOS3_PAD_RETENTION_MMC1_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
|
|
{ EXYNOS3_PAD_RETENTION_MMC2_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
|
|
{ EXYNOS3_PAD_RETENTION_SPI_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
|
|
{ EXYNOS3_PAD_RETENTION_EBIA_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
|
|
{ EXYNOS3_PAD_RETENTION_EBIB_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
|
|
{ EXYNOS3_PAD_RETENTION_JTAG_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
|
|
{ EXYNOS3_PAD_ISOLATION_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
|
|
{ EXYNOS3_PAD_ALV_SEL_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
|
|
{ EXYNOS3_XUSBXTI_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
|
|
{ EXYNOS3_XXTI_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
|
|
{ EXYNOS3_EXT_REGULATOR_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
|
|
{ EXYNOS3_EXT_REGULATOR_COREBLK_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
|
|
{ EXYNOS3_GPIO_MODE_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
|
|
{ EXYNOS3_GPIO_MODE_MAUDIO_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
|
|
{ EXYNOS3_TOP_ASB_RESET_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
|
|
{ EXYNOS3_TOP_ASB_ISOLATION_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
|
|
{ EXYNOS3_TOP_ASB_RESET_COREBLK_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
|
|
{ EXYNOS3_TOP_ASB_ISOLATION_COREBLK_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
|
|
{ EXYNOS3_CAM_SYS_PWR_REG, { 0x7, 0x0, 0x0} },
|
|
{ EXYNOS3_MFC_SYS_PWR_REG, { 0x7, 0x0, 0x0} },
|
|
{ EXYNOS3_G3D_SYS_PWR_REG, { 0x7, 0x0, 0x0} },
|
|
{ EXYNOS3_LCD0_SYS_PWR_REG, { 0x7, 0x0, 0x0} },
|
|
{ EXYNOS3_ISP_SYS_PWR_REG, { 0x7, 0x0, 0x0} },
|
|
{ EXYNOS3_MAUDIO_SYS_PWR_REG, { 0x7, 0x0, 0x0} },
|
|
{ EXYNOS3_CMU_SYSCLK_ISP_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
|
|
{ PMU_TABLE_END,},
|
|
};
|
|
|
|
static unsigned int const exynos3250_list_feed[] = {
|
|
EXYNOS3_ARM_CORE_OPTION(0),
|
|
EXYNOS3_ARM_CORE_OPTION(1),
|
|
EXYNOS3_ARM_CORE_OPTION(2),
|
|
EXYNOS3_ARM_CORE_OPTION(3),
|
|
EXYNOS3_ARM_COMMON_OPTION,
|
|
EXYNOS3_TOP_PWR_OPTION,
|
|
EXYNOS3_CORE_TOP_PWR_OPTION,
|
|
S5P_CAM_OPTION,
|
|
S5P_MFC_OPTION,
|
|
S5P_G3D_OPTION,
|
|
S5P_LCD0_OPTION,
|
|
S5P_ISP_OPTION,
|
|
};
|
|
|
|
static void exynos3250_powerdown_conf_extra(enum sys_powerdown mode)
|
|
{
|
|
unsigned int i;
|
|
unsigned int tmp;
|
|
|
|
/* Enable only SC_FEEDBACK */
|
|
for (i = 0; i < ARRAY_SIZE(exynos3250_list_feed); i++) {
|
|
tmp = pmu_raw_readl(exynos3250_list_feed[i]);
|
|
tmp &= ~(EXYNOS3_OPTION_USE_SC_COUNTER);
|
|
tmp |= EXYNOS3_OPTION_USE_SC_FEEDBACK;
|
|
pmu_raw_writel(tmp, exynos3250_list_feed[i]);
|
|
}
|
|
|
|
if (mode != SYS_SLEEP)
|
|
return;
|
|
|
|
pmu_raw_writel(XUSBXTI_DURATION, EXYNOS3_XUSBXTI_DURATION);
|
|
pmu_raw_writel(XXTI_DURATION, EXYNOS3_XXTI_DURATION);
|
|
pmu_raw_writel(EXT_REGULATOR_DURATION, EXYNOS3_EXT_REGULATOR_DURATION);
|
|
pmu_raw_writel(EXT_REGULATOR_COREBLK_DURATION,
|
|
EXYNOS3_EXT_REGULATOR_COREBLK_DURATION);
|
|
}
|
|
|
|
static void exynos3250_pmu_init(void)
|
|
{
|
|
unsigned int value;
|
|
|
|
/*
|
|
* To prevent from issuing new bus request form L2 memory system
|
|
* If core status is power down, should be set '1' to L2 power down
|
|
*/
|
|
value = pmu_raw_readl(EXYNOS3_ARM_COMMON_OPTION);
|
|
value |= EXYNOS3_OPTION_SKIP_DEACTIVATE_ACEACP_IN_PWDN;
|
|
pmu_raw_writel(value, EXYNOS3_ARM_COMMON_OPTION);
|
|
|
|
/* Enable USE_STANDBY_WFI for all CORE */
|
|
pmu_raw_writel(S5P_USE_STANDBY_WFI_ALL, S5P_CENTRAL_SEQ_OPTION);
|
|
|
|
/*
|
|
* Set PSHOLD port for output high
|
|
*/
|
|
value = pmu_raw_readl(S5P_PS_HOLD_CONTROL);
|
|
value |= S5P_PS_HOLD_OUTPUT_HIGH;
|
|
pmu_raw_writel(value, S5P_PS_HOLD_CONTROL);
|
|
|
|
/*
|
|
* Enable signal for PSHOLD port
|
|
*/
|
|
value = pmu_raw_readl(S5P_PS_HOLD_CONTROL);
|
|
value |= S5P_PS_HOLD_EN;
|
|
pmu_raw_writel(value, S5P_PS_HOLD_CONTROL);
|
|
}
|
|
|
|
const struct exynos_pmu_data exynos3250_pmu_data = {
|
|
.pmu_config = exynos3250_pmu_config,
|
|
.pmu_init = exynos3250_pmu_init,
|
|
.powerdown_conf_extra = exynos3250_powerdown_conf_extra,
|
|
};
|