korg/linux
0
0
Fork 0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-12-28 21:45:01 +08:00
Code Issues Packages Projects Releases Wiki Activity
c01f97387e
linux/arch/arm/boot/dts/atlas6.dtsi
Linus Torvalds 8a5dc585d5 Main pin control pull request for the v3.13 cycle: 
- Blackfin ADI pin control driver, we move yet another
   architecture under this subsystem umbrella.
 
 - Incremental updates to the Renesas Super-H PFC pin control
   driver. New subdriver for the r8a7791 SoC.
 
 - Non-linear GPIO ranges from the gpiolib side of things,
   this enabled simplified device tree bindings by referring
   entire groups of pins on some pin controller to act as
   back-end for a certain GPIO-chip driver.
 
 - Add the Abilis TB10x pin control driver used on the ARC
   architecture. Also the corresponding GPIO driver is merged
   through this tree, so the ARC has full support for pins
   and GPIOs after this.
 
 - Subdrivers for Freescale i.MX1, i.MX27 and i.MX50 pin
   controller instances. The i.MX1 and i.MX27 is an entirely
   new family (silicon) of controllers whereas i.MX50 is
   a variant of the previous supported controller.
 
 - Then the usual slew of fixes, cleanups and incremental
   updates.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.15 (GNU/Linux)
 
 iQIcBAABAgAGBQJSgHrbAAoJEEEQszewGV1zX/gP/R4mAl5rixzu7RDC0nlUHz2S
 F7zf3nhtsAM9GnvJjh9lE43nrisDdCnnBMFeqb7fEr3sp3j+BjQZLp4w/gbkakfY
 6xx6dQ+1+fGojd/gqZI9Le6afpBasAz2E8trariOXW5TmET9ai1y9JCmE2l9K3xA
 jX3h138iUZ4SihBW7c/Ib46TWfe7vaeAF0WKpfNie/uMHYyc+nXQXNNvtzxtk+N3
 +MMuxr9io+d3OyORHD5PlbwWs+jhEPKXfy/isudlkeGbPrA+CMxTCmRc5iu8AvTv
 L0wE6FnBhrdbTUHp9fGmdo1sxmIsijYbbc16yVQOn5kAr/hZvmltjV8efBytEep/
 268ruds2l3TWypaPotuj8Z3Fxm0Jr/+tcQ9Ck8CTMdrGG3J5D78U8fLwVKTcfzJ5
 QjaG0c39MYBbDPO29wfr93MJF7BoNm0D4AyypOCQiH17jL0Q7sXMpeW2WYqlgFf7
 uIWnN3Vsh5V4DcYSCrXoHtts1Wn7i8QEkjyj5gQYvXBU47vGToX5xO6Llvr34lVV
 VGMhivC3f5Z1UmTImwhi+FkfdDVwBYEuiAo3J9ezGvls4Ywq4AjZV/QZB563CztE
 riZ/Xpw3djrxMLKMjGvebTRGpFHcVoh9XV3FetIk+2SCyK7DK1jyYRE1+tvKudAF
 TEIV8476kb7xIVbKt8Oy
 =z9SM
 -----END PGP SIGNATURE-----

Merge tag 'pinctrl-for-v3.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pin control updates from Linus Walleij:
 "Main pin control pull request for the v3.13 cycle.

  The changes hitting arch/blackfin are ACKed by the Blackfin
  maintainer, and the device tree bindings are ACKed to the extent
  possible by someone from the device tree maintainers group.

   - Blackfin ADI pin control driver, we move yet another architecture
     under this subsystem umbrella.

   - Incremental updates to the Renesas Super-H PFC pin control driver.
     New subdriver for the r8a7791 SoC.

   - Non-linear GPIO ranges from the gpiolib side of things, this
     enabled simplified device tree bindings by referring entire groups
     of pins on some pin controller to act as back-end for a certain
     GPIO-chip driver.

   - Add the Abilis TB10x pin control driver used on the ARC
     architecture.  Also the corresponding GPIO driver is merged through
     this tree, so the ARC has full support for pins and GPIOs after
     this.

   - Subdrivers for Freescale i.MX1, i.MX27 and i.MX50 pin controller
     instances.  The i.MX1 and i.MX27 is an entirely new family
     (silicon) of controllers whereas i.MX50 is a variant of the
     previous supported controller.

   - Then the usual slew of fixes, cleanups and incremental updates"

The ARC DT changes are apparently still pending, that hopefully gets
sorted out in a timely manner.

* tag 'pinctrl-for-v3.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (48 commits)
  pinctrl: imx50: add pinctrl support code for the IMX50 SoC
  pinctrl: at91: copy define to driver
  pinctrl: remove minor dead code
  pinctrl: imx: fix using pin->input_val wrongly
  pinctrl: imx1: fix return value check in imx1_pinctrl_core_probe()
  gpio: tb10x: fix return value check in tb10x_gpio_probe()
  gpio: tb10x: use module_platform_driver to simplify the code
  pinctrl: imx27: imx27 pincontrol driver
  pinctrl: imx1 core driver
  pinctrl: sh-pfc: r8a7791 PFC support
  sh-pfc: r8a7778: Add CAN pin groups
  gpio: add TB10x GPIO driver
  pinctrl: at91: correct a few typos
  pinctrl: mvebu: remove redundant of_match_ptr
  pinctrl: tb10x: use module_platform_driver to simplify the code
  pinctrl: tb10x: fix the error handling in tb10x_pinctrl_probe()
  pinctrl: add documentation for pinctrl_get_group_pins()
  pinctrl: rockchip: emulate both edge triggered interrupts
  pinctrl: rockchip: add rk3188 specifics
  pinctrl: rockchip: remove redundant check
  ...
2013-11-12 15:40:03 +09:00

736 lines
21 KiB
Plaintext
Raw Blame History

/*
* DTS file for CSR SiRFatlas6 SoC
*
* Copyright (c) 2012 Cambridge Silicon Radio Limited, a CSR plc group company.
*
* Licensed under GPLv2 or later.
*/
/include/ "skeleton.dtsi"
/ {
compatible = "sirf,atlas6";
#address-cells = <1>;
#size-cells = <1>;
interrupt-parent = <&intc>;
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
reg = <0x0>;
d-cache-line-size = <32>;
i-cache-line-size = <32>;
d-cache-size = <32768>;
i-cache-size = <32768>;
/* from bootloader */
timebase-frequency = <0>;
bus-frequency = <0>;
clock-frequency = <0>;
};
};
axi {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x40000000 0x40000000 0x80000000>;
intc: interrupt-controller@80020000 {
#interrupt-cells = <1>;
interrupt-controller;
compatible = "sirf,prima2-intc";
reg = <0x80020000 0x1000>;
};
sys-iobg {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x88000000 0x88000000 0x40000>;
clks: clock-controller@88000000 {
compatible = "sirf,atlas6-clkc";
reg = <0x88000000 0x1000>;
interrupts = <3>;
#clock-cells = <1>;
};
reset-controller@88010000 {
compatible = "sirf,prima2-rstc";
reg = <0x88010000 0x1000>;
};
rsc-controller@88020000 {
compatible = "sirf,prima2-rsc";
reg = <0x88020000 0x1000>;
};
cphifbg@88030000 {
compatible = "sirf,prima2-cphifbg";
reg = <0x88030000 0x1000>;
};
};
mem-iobg {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x90000000 0x90000000 0x10000>;
memory-controller@90000000 {
compatible = "sirf,prima2-memc";
reg = <0x90000000 0x2000>;
interrupts = <27>;
clocks = <&clks 5>;
};
memc-monitor {
compatible = "sirf,prima2-memcmon";
reg = <0x90002000 0x200>;
interrupts = <4>;
clocks = <&clks 32>;
};
};
disp-iobg {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x90010000 0x90010000 0x30000>;
lcd@90010000 {
compatible = "sirf,prima2-lcd";
reg = <0x90010000 0x20000>;
interrupts = <30>;
clocks = <&clks 34>;
display=<&display>;
/* later transfer to pwm */
bl-gpio = <&gpio 7 0>;
default-panel = <&panel0>;
};
vpp@90020000 {
compatible = "sirf,prima2-vpp";
reg = <0x90020000 0x10000>;
interrupts = <31>;
clocks = <&clks 35>;
};
};
graphics-iobg {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x98000000 0x98000000 0x8000000>;
graphics@98000000 {
compatible = "powervr,sgx510";
reg = <0x98000000 0x8000000>;
interrupts = <6>;
clocks = <&clks 32>;
};
};
graphics2d-iobg {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0xa0000000 0xa0000000 0x8000000>;
ble@a0000000 {
compatible = "sirf,atlas6-ble";
reg = <0xa0000000 0x2000>;
interrupts = <5>;
clocks = <&clks 33>;
};
};
dsp-iobg {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0xa8000000 0xa8000000 0x2000000>;
dspif@a8000000 {
compatible = "sirf,prima2-dspif";
reg = <0xa8000000 0x10000>;
interrupts = <9>;
};
gps@a8010000 {
compatible = "sirf,prima2-gps";
reg = <0xa8010000 0x10000>;
interrupts = <7>;
clocks = <&clks 9>;
};
dsp@a9000000 {
compatible = "sirf,prima2-dsp";
reg = <0xa9000000 0x1000000>;
interrupts = <8>;
clocks = <&clks 8>;
};
};
peri-iobg {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0xb0000000 0xb0000000 0x180000>,
<0x56000000 0x56000000 0x1b00000>;
timer@b0020000 {
compatible = "sirf,prima2-tick";
reg = <0xb0020000 0x1000>;
interrupts = <0>;
};
nand@b0030000 {
compatible = "sirf,prima2-nand";
reg = <0xb0030000 0x10000>;
interrupts = <41>;
clocks = <&clks 26>;
};
audio@b0040000 {
compatible = "sirf,prima2-audio";
reg = <0xb0040000 0x10000>;
interrupts = <35>;
clocks = <&clks 27>;
};
uart0: uart@b0050000 {
cell-index = <0>;
compatible = "sirf,prima2-uart";
reg = <0xb0050000 0x1000>;
interrupts = <17>;
fifosize = <128>;
clocks = <&clks 13>;
sirf,uart-dma-rx-channel = <21>;
sirf,uart-dma-tx-channel = <2>;
};
uart1: uart@b0060000 {
cell-index = <1>;
compatible = "sirf,prima2-uart";
reg = <0xb0060000 0x1000>;
interrupts = <18>;
fifosize = <32>;
clocks = <&clks 14>;
};
uart2: uart@b0070000 {
cell-index = <2>;
compatible = "sirf,prima2-uart";
reg = <0xb0070000 0x1000>;
interrupts = <19>;
fifosize = <128>;
clocks = <&clks 15>;
sirf,uart-dma-rx-channel = <6>;
sirf,uart-dma-tx-channel = <7>;
};
usp0: usp@b0080000 {
cell-index = <0>;
compatible = "sirf,prima2-usp";
reg = <0xb0080000 0x10000>;
interrupts = <20>;
fifosize = <128>;
clocks = <&clks 28>;
sirf,usp-dma-rx-channel = <17>;
sirf,usp-dma-tx-channel = <18>;
};
usp1: usp@b0090000 {
cell-index = <1>;
compatible = "sirf,prima2-usp";
reg = <0xb0090000 0x10000>;
interrupts = <21>;
fifosize = <128>;
clocks = <&clks 29>;
sirf,usp-dma-rx-channel = <14>;
sirf,usp-dma-tx-channel = <15>;
};
dmac0: dma-controller@b00b0000 {
cell-index = <0>;
compatible = "sirf,prima2-dmac";
reg = <0xb00b0000 0x10000>;
interrupts = <12>;
clocks = <&clks 24>;
};
dmac1: dma-controller@b0160000 {
cell-index = <1>;
compatible = "sirf,prima2-dmac";
reg = <0xb0160000 0x10000>;
interrupts = <13>;
clocks = <&clks 25>;
};
vip@b00C0000 {
compatible = "sirf,prima2-vip";
reg = <0xb00C0000 0x10000>;
clocks = <&clks 31>;
interrupts = <14>;
sirf,vip-dma-rx-channel = <16>;
};
spi0: spi@b00d0000 {
cell-index = <0>;
compatible = "sirf,prima2-spi";
reg = <0xb00d0000 0x10000>;
interrupts = <15>;
sirf,spi-num-chipselects = <1>;
cs-gpios = <&gpio 0 0>;
sirf,spi-dma-rx-channel = <25>;
sirf,spi-dma-tx-channel = <20>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clks 19>;
status = "disabled";
};
spi1: spi@b0170000 {
cell-index = <1>;
compatible = "sirf,prima2-spi";
reg = <0xb0170000 0x10000>;
interrupts = <16>;
sirf,spi-num-chipselects = <1>;
sirf,spi-dma-rx-channel = <12>;
sirf,spi-dma-tx-channel = <13>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clks 20>;
status = "disabled";
};
i2c0: i2c@b00e0000 {
cell-index = <0>;
compatible = "sirf,prima2-i2c";
reg = <0xb00e0000 0x10000>;
interrupts = <24>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clks 17>;
};
i2c1: i2c@b00f0000 {
cell-index = <1>;
compatible = "sirf,prima2-i2c";
reg = <0xb00f0000 0x10000>;
interrupts = <25>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clks 18>;
};
tsc@b0110000 {
compatible = "sirf,prima2-tsc";
reg = <0xb0110000 0x10000>;
interrupts = <33>;
clocks = <&clks 16>;
};
gpio: pinctrl@b0120000 {
#gpio-cells = <2>;
#interrupt-cells = <2>;
compatible = "sirf,atlas6-pinctrl";
reg = <0xb0120000 0x10000>;
interrupts = <43 44 45 46 47>;
gpio-controller;
interrupt-controller;
lcd_16pins_a: lcd0@0 {
lcd {
sirf,pins = "lcd_16bitsgrp";
sirf,function = "lcd_16bits";
};
};
lcd_18pins_a: lcd0@1 {
lcd {
sirf,pins = "lcd_18bitsgrp";
sirf,function = "lcd_18bits";
};
};
lcd_24pins_a: lcd0@2 {
lcd {
sirf,pins = "lcd_24bitsgrp";
sirf,function = "lcd_24bits";
};
};
lcdrom_pins_a: lcdrom0@0 {
lcd {
sirf,pins = "lcdromgrp";
sirf,function = "lcdrom";
};
};
uart0_pins_a: uart0@0 {
uart {
sirf,pins = "uart0grp";
sirf,function = "uart0";
};
};
uart0_noflow_pins_a: uart0@1 {
uart {
sirf,pins = "uart0_nostreamctrlgrp";
sirf,function = "uart0_nostreamctrl";
};
};
uart1_pins_a: uart1@0 {
uart {
sirf,pins = "uart1grp";
sirf,function = "uart1";
};
};
uart2_pins_a: uart2@0 {
uart {
sirf,pins = "uart2grp";
sirf,function = "uart2";
};
};
uart2_noflow_pins_a: uart2@1 {
uart {
sirf,pins = "uart2_nostreamctrlgrp";
sirf,function = "uart2_nostreamctrl";
};
};
spi0_pins_a: spi0@0 {
spi {
sirf,pins = "spi0grp";
sirf,function = "spi0";
};
};
spi1_pins_a: spi1@0 {
spi {
sirf,pins = "spi1grp";
sirf,function = "spi1";
};
};
i2c0_pins_a: i2c0@0 {
i2c {
sirf,pins = "i2c0grp";
sirf,function = "i2c0";
};
};
i2c1_pins_a: i2c1@0 {
i2c {
sirf,pins = "i2c1grp";
sirf,function = "i2c1";
};
};
pwm0_pins_a: pwm0@0 {
pwm {
sirf,pins = "pwm0grp";
sirf,function = "pwm0";
};
};
pwm1_pins_a: pwm1@0 {
pwm {
sirf,pins = "pwm1grp";
sirf,function = "pwm1";
};
};
pwm2_pins_a: pwm2@0 {
pwm {
sirf,pins = "pwm2grp";
sirf,function = "pwm2";
};
};
pwm3_pins_a: pwm3@0 {
pwm {
sirf,pins = "pwm3grp";
sirf,function = "pwm3";
};
};
pwm4_pins_a: pwm4@0 {
pwm {
sirf,pins = "pwm4grp";
sirf,function = "pwm4";
};
};
gps_pins_a: gps@0 {
gps {
sirf,pins = "gpsgrp";
sirf,function = "gps";
};
};
vip_pins_a: vip@0 {
vip {
sirf,pins = "vipgrp";
sirf,function = "vip";
};
};
sdmmc0_pins_a: sdmmc0@0 {
sdmmc0 {
sirf,pins = "sdmmc0grp";
sirf,function = "sdmmc0";
};
};
sdmmc1_pins_a: sdmmc1@0 {
sdmmc1 {
sirf,pins = "sdmmc1grp";
sirf,function = "sdmmc1";
};
};
sdmmc2_pins_a: sdmmc2@0 {
sdmmc2 {
sirf,pins = "sdmmc2grp";
sirf,function = "sdmmc2";
};
};
sdmmc2_nowp_pins_a: sdmmc2_nowp@0 {
sdmmc2_nowp {
sirf,pins = "sdmmc2_nowpgrp";
sirf,function = "sdmmc2_nowp";
};
};
sdmmc3_pins_a: sdmmc3@0 {
sdmmc3 {
sirf,pins = "sdmmc3grp";
sirf,function = "sdmmc3";
};
};
sdmmc5_pins_a: sdmmc5@0 {
sdmmc5 {
sirf,pins = "sdmmc5grp";
sirf,function = "sdmmc5";
};
};
i2s_pins_a: i2s@0 {
i2s {
sirf,pins = "i2sgrp";
sirf,function = "i2s";
};
};
i2s_no_din_pins_a: i2s_no_din@0 {
i2s_no_din {
sirf,pins = "i2s_no_dingrp";
sirf,function = "i2s_no_din";
};
};
i2s_6chn_pins_a: i2s_6chn@0 {
i2s_6chn {
sirf,pins = "i2s_6chngrp";
sirf,function = "i2s_6chn";
};
};
ac97_pins_a: ac97@0 {
ac97 {
sirf,pins = "ac97grp";
sirf,function = "ac97";
};
};
nand_pins_a: nand@0 {
nand {
sirf,pins = "nandgrp";
sirf,function = "nand";
};
};
usp0_pins_a: usp0@0 {
usp0 {
sirf,pins = "usp0grp";
sirf,function = "usp0";
};
};
usp0_uart_nostreamctrl_pins_a: usp0@1 {
usp0 {
sirf,pins = "usp0_uart_nostreamctrl_grp";
sirf,function = "usp0_uart_nostreamctrl";
};
};
usp1_pins_a: usp1@0 {
usp1 {
sirf,pins = "usp1grp";
sirf,function = "usp1";
};
};
usb0_upli_drvbus_pins_a: usb0_upli_drvbus@0 {
usb0_upli_drvbus {
sirf,pins = "usb0_upli_drvbusgrp";
sirf,function = "usb0_upli_drvbus";
};
};
usb1_utmi_drvbus_pins_a: usb1_utmi_drvbus@0 {
usb1_utmi_drvbus {
sirf,pins = "usb1_utmi_drvbusgrp";
sirf,function = "usb1_utmi_drvbus";
};
};
usb1_dp_dn_pins_a: usb1_dp_dn@0 {
usb1_dp_dn {
sirf,pins = "usb1_dp_dngrp";
sirf,function = "usb1_dp_dn";
};
};
uart1_route_io_usb1_pins_a: uart1_route_io_usb1@0 {
uart1_route_io_usb1 {
sirf,pins = "uart1_route_io_usb1grp";
sirf,function = "uart1_route_io_usb1";
};
};
warm_rst_pins_a: warm_rst@0 {
warm_rst {
sirf,pins = "warm_rstgrp";
sirf,function = "warm_rst";
};
};
pulse_count_pins_a: pulse_count@0 {
pulse_count {
sirf,pins = "pulse_countgrp";
sirf,function = "pulse_count";
};
};
cko0_pins_a: cko0@0 {
cko0 {
sirf,pins = "cko0grp";
sirf,function = "cko0";
};
};
cko1_pins_a: cko1@0 {
cko1 {
sirf,pins = "cko1grp";
sirf,function = "cko1";
};
};
};
pwm@b0130000 {
compatible = "sirf,prima2-pwm";
reg = <0xb0130000 0x10000>;
clocks = <&clks 21>;
};
efusesys@b0140000 {
compatible = "sirf,prima2-efuse";
reg = <0xb0140000 0x10000>;
clocks = <&clks 22>;
};
pulsec@b0150000 {
compatible = "sirf,prima2-pulsec";
reg = <0xb0150000 0x10000>;
interrupts = <48>;
clocks = <&clks 23>;
};
pci-iobg {
compatible = "sirf,prima2-pciiobg", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x56000000 0x56000000 0x1b00000>;
sd0: sdhci@56000000 {
cell-index = <0>;
compatible = "sirf,prima2-sdhc";
reg = <0x56000000 0x100000>;
interrupts = <38>;
bus-width = <8>;
clocks = <&clks 36>;
};
sd1: sdhci@56100000 {
cell-index = <1>;
compatible = "sirf,prima2-sdhc";
reg = <0x56100000 0x100000>;
interrupts = <38>;
status = "disabled";
clocks = <&clks 36>;
};
sd2: sdhci@56200000 {
cell-index = <2>;
compatible = "sirf,prima2-sdhc";
reg = <0x56200000 0x100000>;
interrupts = <23>;
status = "disabled";
clocks = <&clks 37>;
};
sd3: sdhci@56300000 {
cell-index = <3>;
compatible = "sirf,prima2-sdhc";
reg = <0x56300000 0x100000>;
interrupts = <23>;
status = "disabled";
clocks = <&clks 37>;
};
sd5: sdhci@56500000 {
cell-index = <5>;
compatible = "sirf,prima2-sdhc";
reg = <0x56500000 0x100000>;
interrupts = <39>;
status = "disabled";
clocks = <&clks 38>;
};
pci-copy@57900000 {
compatible = "sirf,prima2-pcicp";
reg = <0x57900000 0x100000>;
interrupts = <40>;
};
rom-interface@57a00000 {
compatible = "sirf,prima2-romif";
reg = <0x57a00000 0x100000>;
};
};
};
rtc-iobg {
compatible = "sirf,prima2-rtciobg", "sirf-prima2-rtciobg-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x80030000 0x10000>;
gpsrtc@1000 {
compatible = "sirf,prima2-gpsrtc";
reg = <0x1000 0x1000>;
interrupts = <55 56 57>;
};
sysrtc@2000 {
compatible = "sirf,prima2-sysrtc";
reg = <0x2000 0x1000>;
interrupts = <52 53 54>;
};
pwrc@3000 {
compatible = "sirf,prima2-pwrc";
reg = <0x3000 0x1000>;
interrupts = <32>;
};
};
uus-iobg {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0xb8000000 0xb8000000 0x40000>;
usb0: usb@b00e0000 {
compatible = "chipidea,ci13611a-prima2";
reg = <0xb8000000 0x10000>;
interrupts = <10>;
clocks = <&clks 40>;
};
usb1: usb@b00f0000 {
compatible = "chipidea,ci13611a-prima2";
reg = <0xb8010000 0x10000>;
interrupts = <11>;
clocks = <&clks 41>;
};
security@b00f0000 {
compatible = "sirf,prima2-security";
reg = <0xb8030000 0x10000>;
interrupts = <42>;
clocks = <&clks 7>;
};
};
};
};
Reference in New Issue View Git Blame Copy Permalink