linux/arch/arm/boot/dts/am571x-idk.dts
Roger Quadros bcbb63b802 ARM: dts: dra7: Separate AM57 dtsi files
AM5 and DRA7 SoC families have different set of modules
in them so the SoC sepecific dtsi files need to be separated.

e.g. Some of the major differences between AM576 and DRA76

		DRA76x	AM576x

USB3		x
USB4		x
ATL		x
VCP		x
MLB		x
ISS		x
PRU-ICSS1		x
PRU-ICSS2		x

This patch only deals with disabling USB3, USB4 and ATL for
AM57 variants.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-04-12 09:57:07 -07:00

197 lines
4.0 KiB
Plaintext

/*
* Copyright (C) 2015-2016 Texas Instruments Incorporated - http://www.ti.com/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/dts-v1/;
#include "am5718.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include "dra7-mmc-iodelay.dtsi"
#include "dra72x-mmc-iodelay.dtsi"
#include "am57xx-idk-common.dtsi"
/ {
model = "TI AM5718 IDK";
compatible = "ti,am5718-idk", "ti,am5718", "ti,dra7";
memory@80000000 {
device_type = "memory";
reg = <0x0 0x80000000 0x0 0x40000000>;
};
leds {
compatible = "gpio-leds";
cpu0-led {
label = "status0:red:cpu0";
gpios = <&gpio2 25 GPIO_ACTIVE_HIGH>;
default-state = "off";
linux,default-trigger = "cpu0";
};
usr0-led {
label = "status0:green:usr";
gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
heartbeat-led {
label = "status0:blue:heartbeat";
gpios = <&gpio2 27 GPIO_ACTIVE_HIGH>;
default-state = "off";
linux,default-trigger = "heartbeat";
};
usr1-led {
label = "status1:red:usr";
gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
usr2-led {
label = "status1:green:usr";
gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
mmc0-led {
label = "status1:blue:mmc0";
gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>;
default-state = "off";
linux,default-trigger = "mmc0";
};
};
idk-leds {
status = "disabled";
compatible = "gpio-leds";
red0-led {
label = "idk:red0";
gpios = <&gpio6 19 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
green0-led {
label = "idk:green0";
gpios = <&gpio4 0 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
blue0-led {
label = "idk:blue0";
gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
red1-led {
label = "idk:red1";
gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
green1-led {
label = "idk:green1";
gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
blue1-led {
label = "idk:blue1";
gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
red2-led {
label = "idk:red2";
gpios = <&gpio7 9 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
green2-led {
label = "idk:green2";
gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
blue2-led {
label = "idk:blue2";
gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
red3-led {
label = "idk:red3";
gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
green3-led {
label = "idk:green3";
gpios = <&gpio7 25 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
blue3-led {
label = "idk:blue3";
gpios = <&gpio7 24 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
};
};
&extcon_usb2 {
id-gpio = <&gpio5 7 GPIO_ACTIVE_HIGH>;
vbus-gpio = <&gpio7 22 GPIO_ACTIVE_HIGH>;
};
&sn65hvs882 {
load-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
};
&mailbox5 {
status = "okay";
mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
status = "okay";
};
mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
status = "okay";
};
};
&mailbox6 {
status = "okay";
mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
status = "okay";
};
};
&pcie1_rc {
status = "okay";
gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
};
&pcie1_ep {
gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
};
&mmc1 {
pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104";
pinctrl-0 = <&mmc1_pins_default_no_clk_pu>;
pinctrl-1 = <&mmc1_pins_hs>;
pinctrl-2 = <&mmc1_pins_sdr12>;
pinctrl-3 = <&mmc1_pins_sdr25>;
pinctrl-4 = <&mmc1_pins_sdr50>;
pinctrl-5 = <&mmc1_pins_ddr50_rev20 &mmc1_iodelay_ddr50_conf>;
pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev20_conf>;
};
&mmc2 {
pinctrl-names = "default", "hs", "ddr_3_3v";
pinctrl-0 = <&mmc2_pins_default>;
pinctrl-1 = <&mmc2_pins_hs>;
pinctrl-2 = <&mmc2_pins_ddr_rev20 &mmc2_iodelay_ddr_conf>;
};