Lee Shawn C bfef04adb3 drm/edid: Select DMT timing if EDID's display feature not support GTF ... Refer to EDID 1.3 spec, display FEATURE (byte 18h) bit #0 said "If this bit is set to 1, the display supports timings based on the GTF standard using default GTF parameter values". And EDID 1.4 spec shows "If bit 0 is set to 0, then the display is noncontinuous frequency (multi-mode) and is only specified to accept the video timing formats that are listed in BASE EDID and certain EXTENSION Blocks. When display feature did not support CVT or GFT2 and monitor's EDID version greater than or equal to "1.2". DRM driver would select GTF as default for standard timing calculation. It may generated some video timing that can't display properly by external monitor. For example. When driver retrieved "0xD1 0xFC" (FHD, 120Hz) and "0xD1 0xE8" (FHD, 100Hz) from "Standard Timings". GTF formula would generate video timing like below. It already over monitor's spec to cause black screen issue. "1920x1080" 120 368881 1920 2072 2288 2656 1080 1081 1084 1157 0x0 0x6 "1920x1080" 100 301992 1920 2072 2280 2640 1080 1081 1084 1144 0x0 0x6 v2: Just confirm GTF flag and omit the revision check. Cc: Jani Nikula <jani.nikula@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Adam Jackson <ajax@redhat.com> Cc: Cooper Chiou <cooper.chiou@intel.com> Signed-off-by: Lee Shawn C <shawn.c.lee@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191007135127.9538-1-shawn.c.lee@intel.com		2019-10-09 15:27:59 +03:00
..
drm	drm/edid: Select DMT timing if EDID's display feature not support GTF	2019-10-09 15:27:59 +03:00
host1x	drm/tegra: Changes for v5.3-rc1	2019-06-25 12:59:43 +10:00
ipu-v3	gpu: ipu-v3: image-convert: only sample into the next tile if necessary	2019-08-19 16:25:30 +02:00
vga	topic/remove-fbcon-notifiers:	2019-06-26 12:26:34 +02:00
Makefile