| .. |
|
a7-pll.c
|
clk: qcom: a7-pll: Add missing MODULE_DEVICE_TABLE
|
2021-04-09 11:20:52 -07:00 |
|
a53-pll.c
|
clk: qcom: a53-pll: convert to use parent_data rather than parent_names
|
2022-09-13 16:49:15 -05:00 |
|
apcs-msm8916.c
|
clk: qcom: Convert to platform remove callback returning void
|
2023-03-13 05:41:06 -07:00 |
|
apcs-msm8996.c
|
clk: qcom: apcs-msm8986: Include bitfield.h for FIELD_PREP
|
2023-02-22 17:38:56 -08:00 |
|
apcs-sdx55.c
|
clk: qcom: Convert to platform remove callback returning void
|
2023-03-13 05:41:06 -07:00 |
|
apss-ipq6018.c
|
clk: qcom: apss-ipq6018: add the GPLL0 clock also as clock provider
|
2023-10-21 12:59:13 -07:00 |
|
apss-ipq-pll.c
|
clk: qcom: apss-ipq-pll: add support for IPQ5018
|
2023-12-02 16:53:37 -08:00 |
|
camcc-sc7180.c
|
Merge branch 'clk-qcom' into clk-next
|
2023-08-30 14:39:58 -07:00 |
|
camcc-sc7280.c
|
clk: Explicitly include correct DT includes
|
2023-07-19 13:13:16 -07:00 |
|
camcc-sc8280xp.c
|
clk: qcom: camcc-sc8280xp: Prevent error pointer dereference
|
2023-12-15 23:35:54 -06:00 |
|
camcc-sdm845.c
|
clk: qcom: Revert sync_state based clk_disable_unused
|
2023-02-22 06:34:08 -08:00 |
|
camcc-sm6350.c
|
clk: qcom: camcc-sm6350: Make camcc_sm6350_hws static
|
2023-01-11 13:35:17 -06:00 |
|
camcc-sm8250.c
|
clk: qcom: camcc-sm8250: Fix topology around titan_top power domain
|
2022-06-30 18:34:55 -05:00 |
|
camcc-sm8450.c
|
clk: qcom: camcc-sm8450: switch to parent_hws
|
2023-01-10 15:58:59 -06:00 |
|
camcc-sm8550.c
|
clk: qcom: Replace of_device.h with explicit includes
|
2023-10-21 08:41:50 -07:00 |
|
camcc-x1e80100.c
|
clk: qcom: Add camcc clock driver for x1e80100
|
2024-02-06 11:13:19 -06:00 |
|
clk-alpha-pll.c
|
clk: qcom: clk-alpha-pll: Add support for zonda ole pll configure
|
2024-02-06 11:13:19 -06:00 |
|
clk-alpha-pll.h
|
clk: qcom: clk-alpha-pll: Add support for zonda ole pll configure
|
2024-02-06 11:13:19 -06:00 |
|
clk-branch.c
|
clk: qcom: branch: Add mem ops support for branch2 clocks
|
2023-12-07 08:47:05 -08:00 |
|
clk-branch.h
|
clk: qcom: branch: Add mem ops support for branch2 clocks
|
2023-12-07 08:47:05 -08:00 |
|
clk-cbf-8996.c
|
clk: qcom: cbf-msm8996: Convert to platform remove callback returning void
|
2023-10-21 08:40:00 -07:00 |
|
clk-cpu-8996.c
|
clk: Annotate struct clk_hw_onecell_data with __counted_by
|
2023-08-22 13:51:26 -07:00 |
|
clk-hfpll.c
|
clk: qcom: clk-hfpll: Configure l_val in init when required
|
2023-09-13 12:07:58 -07:00 |
|
clk-hfpll.h
|
clk: qcom: clk-hfpll: Configure l_val in init when required
|
2023-09-13 12:07:58 -07:00 |
|
clk-krait.c
|
clk: qcom: clk-krait: switch to .determine_rate
|
2023-03-13 16:38:24 -07:00 |
|
clk-krait.h
|
clk: qcom: clk-krait: add apq/ipq8064 errata workaround
|
2022-06-27 15:41:37 -05:00 |
|
clk-pll.c
|
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 282
|
2019-06-05 17:36:37 +02:00 |
|
clk-pll.h
|
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 282
|
2019-06-05 17:36:37 +02:00 |
|
clk-rcg2.c
|
clk: qcom: clk-rcg2: Fix clock rate overflow for high parent frequencies
|
2023-09-19 20:04:15 -07:00 |
|
clk-rcg.c
|
clk: qcom: clk-rcg: add clk_rcg_floor_ops ops
|
2022-03-08 16:19:31 -06:00 |
|
clk-rcg.h
|
clk: qcom: rcg2: Make hw_clk_ctrl toggleable
|
2023-05-26 18:22:58 -07:00 |
|
clk-regmap-divider.c
|
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 282
|
2019-06-05 17:36:37 +02:00 |
|
clk-regmap-divider.h
|
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 282
|
2019-06-05 17:36:37 +02:00 |
|
clk-regmap-mux-div.c
|
clk: qcom: Add regmap mux-div clocks support
|
2018-01-02 10:00:24 -08:00 |
|
clk-regmap-mux-div.h
|
clk: qcom: Use the correct style for SPDX License Identifier
|
2019-05-01 13:01:13 -07:00 |
|
clk-regmap-mux.c
|
Revert "clk: qcom: regmap-mux: add pipe clk implementation"
|
2022-05-23 12:26:13 -05:00 |
|
clk-regmap-mux.h
|
Revert "clk: qcom: regmap-mux: add pipe clk implementation"
|
2022-05-23 12:26:13 -05:00 |
|
clk-regmap-phy-mux.c
|
clk: qcom: regmap: add PHY clock source implementation
|
2022-06-25 21:36:07 -05:00 |
|
clk-regmap-phy-mux.h
|
clk: qcom: regmap: add PHY clock source implementation
|
2022-06-25 21:36:07 -05:00 |
|
clk-regmap.c
|
clk: qcom: clk-regmap: Provide missing description for 'devm_clk_register_regmap()'s dev param
|
2021-02-10 19:42:51 -08:00 |
|
clk-regmap.h
|
clk: define to_clk_regmap() as inline function
|
2020-10-28 16:34:44 -07:00 |
|
clk-rpm.c
|
clk: Explicitly include correct DT includes
|
2023-07-19 13:13:16 -07:00 |
|
clk-rpmh.c
|
clk: qcom: rpmh: Add support for X1E80100 rpmh clocks
|
2023-12-07 20:21:13 -08:00 |
|
clk-smd-rpm.c
|
clk: qcom: smd-rpm: Move CPUSS_GNoC clock to interconnect
|
2023-10-21 08:41:17 -07:00 |
|
clk-spmi-pmic-div.c
|
clk: qcom: clk-spmi-pmic-div: Annotate struct spmi_pmic_div_clk_cc with __counted_by
|
2023-08-22 13:51:54 -07:00 |
|
common.c
|
clk: qcom: regmap-mux: fix parent clock lookup
|
2021-12-02 15:07:34 -08:00 |
|
common.h
|
clk: qcom: regmap-mux: fix parent clock lookup
|
2021-12-02 15:07:34 -08:00 |
|
dispcc-qcm2290.c
|
clk: Explicitly include correct DT includes
|
2023-07-19 13:13:16 -07:00 |
|
dispcc-sc7180.c
|
clk: qcom: dispcc-sc7180: switch to parent_hws
|
2023-01-10 15:58:59 -06:00 |
|
dispcc-sc7280.c
|
clk: qcom: dispcc: Update the transition delay for MDSS GDSC
|
2022-02-24 16:22:11 -08:00 |
|
dispcc-sc8280xp.c
|
clk: qcom: dispcc-sc8280xp: Use ret registers on GDSCs
|
2023-07-27 20:28:15 -07:00 |
|
dispcc-sdm845.c
|
clk: qcom: Revert sync_state based clk_disable_unused
|
2023-02-22 06:34:08 -08:00 |
|
dispcc-sm6115.c
|
clk: Explicitly include correct DT includes
|
2023-07-19 13:13:16 -07:00 |
|
dispcc-sm6125.c
|
clk: qcom: dispcc-sm6125: Fix compatible string to match bindings
|
2022-12-29 10:57:25 -06:00 |
|
dispcc-sm6350.c
|
clk: qcom: dispcc-sm6350: Add CLK_OPS_PARENT_ENABLE to pixel&byte src
|
2022-11-05 22:21:59 -05:00 |
|
dispcc-sm6375.c
|
clk: qcom: dispcc-sm6375: switch to parent_hws
|
2023-01-10 15:58:59 -06:00 |
|
dispcc-sm8250.c
|
clk: qcom: dispcc-sm8250: switch to devm_pm_runtime_enable
|
2023-01-10 22:05:08 -06:00 |
|
dispcc-sm8450.c
|
Merge branch 'clk-qcom' into clk-next
|
2023-08-30 14:39:58 -07:00 |
|
dispcc-sm8550.c
|
clk: qcom: dispcc-sm8550: Use the correct PLL configuration function
|
2023-12-19 11:27:03 -06:00 |
|
dispcc-sm8650.c
|
clk: qcom: dispcc-sm8650: Add test_ctl parameters to PLL config
|
2023-12-19 14:12:41 -06:00 |
|
dispcc-x1e80100.c
|
clk: qcom: Add dispcc clock driver for x1e80100
|
2024-02-06 11:13:19 -06:00 |
|
ecpricc-qdu1000.c
|
clk: qcom: Add ECPRICC driver support for QDU1000 and QRU1000
|
2023-12-07 08:47:05 -08:00 |
|
gcc-apq8084.c
|
clk: Explicitly include correct DT includes
|
2023-07-19 13:13:16 -07:00 |
|
gcc-ipq806x.c
|
clk: Explicitly include correct DT includes
|
2023-07-19 13:13:16 -07:00 |
|
gcc-ipq4019.c
|
Merge branch 'clk-qcom' into clk-next
|
2023-08-30 14:39:58 -07:00 |
|
gcc-ipq5018.c
|
clk: qcom: ipq5018: drop the CLK_SET_RATE_PARENT flag from GPLL clocks
|
2023-10-21 12:59:13 -07:00 |
|
gcc-ipq5332.c
|
clk: qcom: ipq5332: drop the CLK_SET_RATE_PARENT flag from GPLL clocks
|
2023-10-21 12:59:13 -07:00 |
|
gcc-ipq6018.c
|
clk: qcom: gcc-ipq6018: add qdss_at clock needed for wifi operation
|
2024-01-23 07:45:06 -06:00 |
|
gcc-ipq8074.c
|
clk: qcom: ipq8074: drop the CLK_SET_RATE_PARENT flag from PLL clocks
|
2023-10-21 12:59:13 -07:00 |
|
gcc-ipq9574.c
|
clk: qcom: ipq9574: drop the CLK_SET_RATE_PARENT flag from GPLL clocks
|
2023-10-21 12:59:13 -07:00 |
|
gcc-mdm9607.c
|
clk: Explicitly include correct DT includes
|
2023-07-19 13:13:16 -07:00 |
|
gcc-mdm9615.c
|
Merge branch 'clk-qcom' into clk-next
|
2023-08-30 14:39:58 -07:00 |
|
gcc-msm8660.c
|
clk: Explicitly include correct DT includes
|
2023-07-19 13:13:16 -07:00 |
|
gcc-msm8909.c
|
clk: Explicitly include correct DT includes
|
2023-07-19 13:13:16 -07:00 |
|
gcc-msm8916.c
|
clk: Explicitly include correct DT includes
|
2023-07-19 13:13:16 -07:00 |
|
gcc-msm8917.c
|
Merge branch 'clk-qcom' into clk-next
|
2023-08-30 14:39:58 -07:00 |
|
gcc-msm8939.c
|
clk: qcom: gcc-msm8939: Add missing CSI2 related clocks
|
2023-12-07 08:04:41 -08:00 |
|
gcc-msm8953.c
|
clk: Explicitly include correct DT includes
|
2023-07-19 13:13:16 -07:00 |
|
gcc-msm8960.c
|
clk: Use device_get_match_data()
|
2023-10-23 20:16:21 -07:00 |
|
gcc-msm8974.c
|
clk: Use device_get_match_data()
|
2023-10-23 20:16:21 -07:00 |
|
gcc-msm8976.c
|
clk: Explicitly include correct DT includes
|
2023-07-19 13:13:16 -07:00 |
|
gcc-msm8994.c
|
clk: Explicitly include correct DT includes
|
2023-07-19 13:13:16 -07:00 |
|
gcc-msm8996.c
|
clk: qcom: gcc-msm8996: Remove RPM bus clocks
|
2023-09-19 20:02:31 -07:00 |
|
gcc-msm8998.c
|
Merge branch 'clk-qcom' into clk-next
|
2023-08-30 14:39:58 -07:00 |
|
gcc-qcm2290.c
|
clk: qcom: gcc-qcm2290: Mark RCGs shared where applicable
|
2023-05-24 21:47:16 -07:00 |
|
gcc-qcs404.c
|
clk: qcom: gcc-qcs404: fix duplicate initializer warning
|
2023-01-30 08:41:06 -06:00 |
|
gcc-qdu1000.c
|
Merge branch 'clk-qcom' into clk-next
|
2023-08-30 14:39:58 -07:00 |
|
gcc-sa8775p.c
|
clk: qcom: gcc-sa8775p: Set delay for Venus CLK resets
|
2024-02-07 12:14:46 -06:00 |
|
gcc-sc7180.c
|
Merge branch 'clk-qcom' into clk-next
|
2023-08-30 14:39:58 -07:00 |
|
gcc-sc7280.c
|
clk: Explicitly include correct DT includes
|
2023-07-19 13:13:16 -07:00 |
|
gcc-sc8180x.c
|
clk: qcom: gcc-sc8180x: Set delay for Venus CLK resets
|
2024-02-07 12:14:46 -06:00 |
|
gcc-sc8280xp.c
|
clk: qcom: gcc-sc8280xp: Set delay for Venus CLK resets
|
2024-02-07 12:14:47 -06:00 |
|
gcc-sdm660.c
|
clk: Explicitly include correct DT includes
|
2023-07-19 13:13:16 -07:00 |
|
gcc-sdm845.c
|
clk: qcom: gcc-sdm845: Add soft dependency on rpmhpd
|
2024-01-23 09:38:32 -06:00 |
|
gcc-sdx55.c
|
clk: qcom: gcc-sdx55: get rid of test clock
|
2023-01-10 22:44:29 -06:00 |
|
gcc-sdx65.c
|
clk: Explicitly include correct DT includes
|
2023-07-19 13:13:16 -07:00 |
|
gcc-sdx75.c
|
clk: Explicitly include correct DT includes
|
2023-07-19 13:13:16 -07:00 |
|
gcc-sm4450.c
|
clk: qcom: gcc-sm4450: Set delay for Venus CLK resets
|
2024-02-07 12:14:47 -06:00 |
|
gcc-sm6115.c
|
clk: Explicitly include correct DT includes
|
2023-07-19 13:13:16 -07:00 |
|
gcc-sm6125.c
|
clk: Explicitly include correct DT includes
|
2023-07-19 13:13:16 -07:00 |
|
gcc-sm6350.c
|
clk: qcom: gcc-sm6350: Fix gcc_sdcc2_apps_clk_src
|
2023-08-04 08:54:29 -07:00 |
|
gcc-sm6375.c
|
clk: Explicitly include correct DT includes
|
2023-07-19 13:13:16 -07:00 |
|
gcc-sm7150.c
|
clk: qcom: gcc-sm7150: Set delay for Venus CLK resets
|
2024-02-07 12:14:47 -06:00 |
|
gcc-sm8150.c
|
clk: qcom: gcc-sm8150: Add gcc video resets for sm8150
|
2024-01-28 11:54:09 -06:00 |
|
gcc-sm8250.c
|
clk: qcom: gcc-sm8250: Set delay for Venus CLK resets
|
2024-02-07 12:14:47 -06:00 |
|
gcc-sm8350.c
|
clk: qcom: gcc-sm8350: Set delay for Venus CLK resets
|
2024-02-07 12:14:47 -06:00 |
|
gcc-sm8450.c
|
clk: qcom: gcc-sm8450: Set delay for Venus CLK resets
|
2024-02-07 12:14:47 -06:00 |
|
gcc-sm8550.c
|
clk: qcom: gcc-sm8550: Set delay for Venus CLK resets
|
2024-02-07 12:14:47 -06:00 |
|
gcc-sm8650.c
|
clk: qcom: gcc-sm8650: Set delay for Venus CLK resets
|
2024-02-07 12:14:47 -06:00 |
|
gcc-x1e80100.c
|
clk: qcom: gcc-x1e80100: Replace of_device.h with explicit includes
|
2024-01-19 08:17:28 -06:00 |
|
gdsc.c
|
clk: qcom: gdsc: Enable supply reglator in GPU GX handler
|
2024-01-30 14:48:01 -06:00 |
|
gdsc.h
|
clk: qcom: gdsc: Remove direct runtime PM calls
|
2022-11-04 11:53:49 -07:00 |
|
gpucc-msm8998.c
|
Merge branch 'clk-qcom' into clk-next
|
2023-08-30 14:39:58 -07:00 |
|
gpucc-sa8775p.c
|
clk: Explicitly include correct DT includes
|
2023-07-19 13:13:16 -07:00 |
|
gpucc-sc7180.c
|
clk: qcom: gpucc-sc7180: fix clk_dis_wait being programmed for CX GDSC
|
2023-02-08 17:48:55 -08:00 |
|
gpucc-sc7280.c
|
clk: qcom: Update the force mem core bit for GPU clocks
|
2022-10-27 17:23:29 -07:00 |
|
gpucc-sc8280xp.c
|
clk: qcom: gpucc-sc8280xp: Add external supply for GX gdsc
|
2024-01-30 14:48:06 -06:00 |
|
gpucc-sdm660.c
|
clk: Explicitly include correct DT includes
|
2023-07-19 13:13:16 -07:00 |
|
gpucc-sdm845.c
|
clk: qcom: Revert sync_state based clk_disable_unused
|
2023-02-22 06:34:08 -08:00 |
|
gpucc-sm6115.c
|
clk: Explicitly include correct DT includes
|
2023-07-19 13:13:16 -07:00 |
|
gpucc-sm6125.c
|
clk: Explicitly include correct DT includes
|
2023-07-19 13:13:16 -07:00 |
|
gpucc-sm6350.c
|
clk: qcom: gpucc-sm6350: Fix clock source names
|
2023-07-09 20:53:09 -07:00 |
|
gpucc-sm6375.c
|
clk: Explicitly include correct DT includes
|
2023-07-19 13:13:16 -07:00 |
|
gpucc-sm8150.c
|
clk: qcom: gpucc-sm8150: Update the gpu_cc_pll1 config
|
2023-12-07 08:42:41 -08:00 |
|
gpucc-sm8250.c
|
clk: qcom: gpucc-sm8250: use parent_hws where possible
|
2021-04-07 17:22:54 -07:00 |
|
gpucc-sm8350.c
|
clk: Explicitly include correct DT includes
|
2023-07-19 13:13:16 -07:00 |
|
gpucc-sm8450.c
|
clk: Explicitly include correct DT includes
|
2023-07-19 13:13:16 -07:00 |
|
gpucc-sm8550.c
|
clk: qcom: gpucc-sm8550: Update GPU PLL settings
|
2023-12-19 11:27:03 -06:00 |
|
gpucc-sm8650.c
|
clk: qcom: gpucc-sm8650: Add test_ctl parameters to PLL config
|
2023-12-19 14:12:41 -06:00 |
|
gpucc-x1e80100.c
|
clk: qcom: Add GPU clock driver for x1e80100
|
2024-02-06 11:13:19 -06:00 |
|
hfpll.c
|
clk: qcom: hfpll: Add MSM8976 PLL data
|
2023-09-13 12:07:59 -07:00 |
|
Kconfig
|
clk: qcom: Add camcc clock driver for x1e80100
|
2024-02-06 11:13:19 -06:00 |
|
kpss-xcc.c
|
clk: Use device_get_match_data()
|
2023-10-23 20:16:21 -07:00 |
|
krait-cc.c
|
clk: Use device_get_match_data()
|
2023-10-23 20:16:21 -07:00 |
|
lcc-ipq806x.c
|
clk: Explicitly include correct DT includes
|
2023-07-19 13:13:16 -07:00 |
|
lcc-msm8960.c
|
Merge branch 'clk-qcom' into clk-next
|
2023-08-30 14:39:58 -07:00 |
|
lpass-gfm-sm8250.c
|
clk: Explicitly include correct DT includes
|
2023-07-19 13:13:16 -07:00 |
|
lpassaudiocc-sc7280.c
|
clk: Explicitly include correct DT includes
|
2023-07-19 13:13:16 -07:00 |
|
lpasscc-sc7280.c
|
clk: qcom: lpasscc-sc7280: fix missing resume during probe
|
2023-07-18 07:58:50 -07:00 |
|
lpasscc-sc8280xp.c
|
clk: Explicitly include correct DT includes
|
2023-07-19 13:13:16 -07:00 |
|
lpasscc-sdm845.c
|
clk: qcom: lpasscc-sdm845: explicitly include clk-provider.h
|
2021-12-20 23:14:50 -06:00 |
|
lpasscorecc-sc7180.c
|
clk: Explicitly include correct DT includes
|
2023-07-19 13:13:16 -07:00 |
|
lpasscorecc-sc7280.c
|
clk: Explicitly include correct DT includes
|
2023-07-19 13:13:16 -07:00 |
|
Makefile
|
clk: qcom: Add camcc clock driver for x1e80100
|
2024-02-06 11:13:19 -06:00 |
|
mmcc-apq8084.c
|
clk: qcom: mmcc-apq8084: use parent_hws/_data instead of parent_names
|
2023-01-18 18:27:35 -06:00 |
|
mmcc-msm8960.c
|
clk: Use device_get_match_data()
|
2023-10-23 20:16:21 -07:00 |
|
mmcc-msm8974.c
|
clk: qcom: mmcc-msm8974: remove ocmemcx_ahb_clk
|
2023-09-20 07:07:34 -07:00 |
|
mmcc-msm8994.c
|
clk: Explicitly include correct DT includes
|
2023-07-19 13:13:16 -07:00 |
|
mmcc-msm8996.c
|
clk: Explicitly include correct DT includes
|
2023-07-19 13:13:16 -07:00 |
|
mmcc-msm8998.c
|
clk: qcom: mmcc-msm8998: Fix the SMMU GDSC
|
2023-09-20 05:40:33 -07:00 |
|
mmcc-sdm660.c
|
clk: Use device_get_match_data()
|
2023-10-23 20:16:21 -07:00 |
|
mss-sc7180.c
|
clk: qcom: mss-sc7180: fix missing resume during probe
|
2023-07-18 07:58:50 -07:00 |
|
q6sstop-qcs404.c
|
clk: qcom: q6sstop-qcs404: fix missing resume during probe
|
2023-07-18 07:58:50 -07:00 |
|
reset.c
|
clk: qcom: reset: Ensure write completion on reset de/assertion
|
2024-02-07 12:14:19 -06:00 |
|
reset.h
|
clk: qcom: reset: Increase max reset delay
|
2024-02-06 14:53:26 -06:00 |
|
tcsrcc-sm8550.c
|
clk: Explicitly include correct DT includes
|
2023-07-19 13:13:16 -07:00 |
|
tcsrcc-sm8650.c
|
clk: qcom: add the SM8650 TCSR Clock Controller driver
|
2023-12-07 08:11:29 -08:00 |
|
tcsrcc-x1e80100.c
|
clk: qcom: Add TCSR clock driver for x1e80100
|
2024-02-06 11:13:19 -06:00 |
|
turingcc-qcs404.c
|
clk: qcom: turingcc-qcs404: fix missing resume during probe
|
2023-07-18 07:58:50 -07:00 |
|
videocc-sc7180.c
|
clk: qcom: videocc-sc7180: use parent_hws instead of parent_data
|
2022-02-10 18:33:31 -06:00 |
|
videocc-sc7280.c
|
clk: qcom: Add video clock controller driver for SC7280
|
2021-07-20 13:46:32 -07:00 |
|
videocc-sdm845.c
|
clk: qcom: videocc-sdm845: get rid of the test clock
|
2021-04-07 17:22:53 -07:00 |
|
videocc-sm8150.c
|
clk: qcom: videocc-sm8150: Set delay for Venus CLK resets
|
2024-02-07 12:14:47 -06:00 |
|
videocc-sm8250.c
|
clk: qcom: videocc-sm8250: Set delay for Venus CLK resets
|
2024-02-07 12:14:47 -06:00 |
|
videocc-sm8350.c
|
clk: qcom: videocc-sm8350: Set delay for Venus CLK resets
|
2024-02-07 12:14:47 -06:00 |
|
videocc-sm8450.c
|
clk: Explicitly include correct DT includes
|
2023-07-19 13:13:16 -07:00 |
|
videocc-sm8550.c
|
clk: qcom: videocc-sm8550: switch to clk_lucid_ole_pll_configure
|
2023-10-21 08:46:03 -07:00 |
bdc8fc1ecc