mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-04 17:44:14 +08:00
79abca2b39
All implementations return 0 and the return value of mipi_dsi_drv_remove() is ignored anyhow. So change the prototype of the remove function to return no value. This way driver authors are not tempted to assume that passing an error to the upper layer is a good idea. All drivers are adapted accordingly. There is no intended change of behaviour. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220708094922.1408248-4-u.kleine-koenig@pengutronix.de
287 lines
7.0 KiB
C
287 lines
7.0 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Copyright (c) 2019, The Linux Foundation. All rights reserved.
|
|
*/
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/gpio/consumer.h>
|
|
#include <linux/regulator/consumer.h>
|
|
|
|
#include <video/mipi_display.h>
|
|
|
|
#include <drm/drm_mipi_dsi.h>
|
|
#include <drm/drm_modes.h>
|
|
#include <drm/drm_panel.h>
|
|
|
|
struct visionox_rm69299 {
|
|
struct drm_panel panel;
|
|
struct regulator_bulk_data supplies[2];
|
|
struct gpio_desc *reset_gpio;
|
|
struct mipi_dsi_device *dsi;
|
|
bool prepared;
|
|
bool enabled;
|
|
};
|
|
|
|
static inline struct visionox_rm69299 *panel_to_ctx(struct drm_panel *panel)
|
|
{
|
|
return container_of(panel, struct visionox_rm69299, panel);
|
|
}
|
|
|
|
static int visionox_rm69299_power_on(struct visionox_rm69299 *ctx)
|
|
{
|
|
int ret;
|
|
|
|
ret = regulator_bulk_enable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/*
|
|
* Reset sequence of visionox panel requires the panel to be
|
|
* out of reset for 10ms, followed by being held in reset
|
|
* for 10ms and then out again
|
|
*/
|
|
gpiod_set_value(ctx->reset_gpio, 1);
|
|
usleep_range(10000, 20000);
|
|
gpiod_set_value(ctx->reset_gpio, 0);
|
|
usleep_range(10000, 20000);
|
|
gpiod_set_value(ctx->reset_gpio, 1);
|
|
usleep_range(10000, 20000);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int visionox_rm69299_power_off(struct visionox_rm69299 *ctx)
|
|
{
|
|
gpiod_set_value(ctx->reset_gpio, 0);
|
|
|
|
return regulator_bulk_disable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
|
|
}
|
|
|
|
static int visionox_rm69299_unprepare(struct drm_panel *panel)
|
|
{
|
|
struct visionox_rm69299 *ctx = panel_to_ctx(panel);
|
|
int ret;
|
|
|
|
ctx->dsi->mode_flags = 0;
|
|
|
|
ret = mipi_dsi_dcs_write(ctx->dsi, MIPI_DCS_SET_DISPLAY_OFF, NULL, 0);
|
|
if (ret < 0)
|
|
dev_err(ctx->panel.dev, "set_display_off cmd failed ret = %d\n", ret);
|
|
|
|
/* 120ms delay required here as per DCS spec */
|
|
msleep(120);
|
|
|
|
ret = mipi_dsi_dcs_write(ctx->dsi, MIPI_DCS_ENTER_SLEEP_MODE, NULL, 0);
|
|
if (ret < 0) {
|
|
dev_err(ctx->panel.dev, "enter_sleep cmd failed ret = %d\n", ret);
|
|
}
|
|
|
|
ret = visionox_rm69299_power_off(ctx);
|
|
|
|
ctx->prepared = false;
|
|
return ret;
|
|
}
|
|
|
|
static int visionox_rm69299_prepare(struct drm_panel *panel)
|
|
{
|
|
struct visionox_rm69299 *ctx = panel_to_ctx(panel);
|
|
int ret;
|
|
|
|
if (ctx->prepared)
|
|
return 0;
|
|
|
|
ret = visionox_rm69299_power_on(ctx);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ctx->dsi->mode_flags |= MIPI_DSI_MODE_LPM;
|
|
|
|
ret = mipi_dsi_dcs_write_buffer(ctx->dsi, (u8[]) { 0xfe, 0x00 }, 2);
|
|
if (ret < 0) {
|
|
dev_err(ctx->panel.dev, "cmd set tx 0 failed, ret = %d\n", ret);
|
|
goto power_off;
|
|
}
|
|
|
|
ret = mipi_dsi_dcs_write_buffer(ctx->dsi, (u8[]) { 0xc2, 0x08 }, 2);
|
|
if (ret < 0) {
|
|
dev_err(ctx->panel.dev, "cmd set tx 1 failed, ret = %d\n", ret);
|
|
goto power_off;
|
|
}
|
|
|
|
ret = mipi_dsi_dcs_write_buffer(ctx->dsi, (u8[]) { 0x35, 0x00 }, 2);
|
|
if (ret < 0) {
|
|
dev_err(ctx->panel.dev, "cmd set tx 2 failed, ret = %d\n", ret);
|
|
goto power_off;
|
|
}
|
|
|
|
ret = mipi_dsi_dcs_write_buffer(ctx->dsi, (u8[]) { 0x51, 0xff }, 2);
|
|
if (ret < 0) {
|
|
dev_err(ctx->panel.dev, "cmd set tx 3 failed, ret = %d\n", ret);
|
|
goto power_off;
|
|
}
|
|
|
|
ret = mipi_dsi_dcs_write(ctx->dsi, MIPI_DCS_EXIT_SLEEP_MODE, NULL, 0);
|
|
if (ret < 0) {
|
|
dev_err(ctx->panel.dev, "exit_sleep_mode cmd failed ret = %d\n", ret);
|
|
goto power_off;
|
|
}
|
|
|
|
/* Per DSI spec wait 120ms after sending exit sleep DCS command */
|
|
msleep(120);
|
|
|
|
ret = mipi_dsi_dcs_write(ctx->dsi, MIPI_DCS_SET_DISPLAY_ON, NULL, 0);
|
|
if (ret < 0) {
|
|
dev_err(ctx->panel.dev, "set_display_on cmd failed ret = %d\n", ret);
|
|
goto power_off;
|
|
}
|
|
|
|
/* Per DSI spec wait 120ms after sending set_display_on DCS command */
|
|
msleep(120);
|
|
|
|
ctx->prepared = true;
|
|
|
|
return 0;
|
|
|
|
power_off:
|
|
return ret;
|
|
}
|
|
|
|
static const struct drm_display_mode visionox_rm69299_1080x2248_60hz = {
|
|
.name = "1080x2248",
|
|
.clock = 158695,
|
|
.hdisplay = 1080,
|
|
.hsync_start = 1080 + 26,
|
|
.hsync_end = 1080 + 26 + 2,
|
|
.htotal = 1080 + 26 + 2 + 36,
|
|
.vdisplay = 2248,
|
|
.vsync_start = 2248 + 56,
|
|
.vsync_end = 2248 + 56 + 4,
|
|
.vtotal = 2248 + 56 + 4 + 4,
|
|
.flags = 0,
|
|
};
|
|
|
|
static int visionox_rm69299_get_modes(struct drm_panel *panel,
|
|
struct drm_connector *connector)
|
|
{
|
|
struct visionox_rm69299 *ctx = panel_to_ctx(panel);
|
|
struct drm_display_mode *mode;
|
|
|
|
mode = drm_mode_duplicate(connector->dev,
|
|
&visionox_rm69299_1080x2248_60hz);
|
|
if (!mode) {
|
|
dev_err(ctx->panel.dev, "failed to create a new display mode\n");
|
|
return 0;
|
|
}
|
|
|
|
connector->display_info.width_mm = 74;
|
|
connector->display_info.height_mm = 131;
|
|
mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
|
|
drm_mode_probed_add(connector, mode);
|
|
|
|
return 1;
|
|
}
|
|
|
|
static const struct drm_panel_funcs visionox_rm69299_drm_funcs = {
|
|
.unprepare = visionox_rm69299_unprepare,
|
|
.prepare = visionox_rm69299_prepare,
|
|
.get_modes = visionox_rm69299_get_modes,
|
|
};
|
|
|
|
static int visionox_rm69299_probe(struct mipi_dsi_device *dsi)
|
|
{
|
|
struct device *dev = &dsi->dev;
|
|
struct visionox_rm69299 *ctx;
|
|
int ret;
|
|
|
|
ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
|
|
if (!ctx)
|
|
return -ENOMEM;
|
|
|
|
mipi_dsi_set_drvdata(dsi, ctx);
|
|
|
|
ctx->panel.dev = dev;
|
|
ctx->dsi = dsi;
|
|
|
|
ctx->supplies[0].supply = "vdda";
|
|
ctx->supplies[1].supply = "vdd3p3";
|
|
|
|
ret = devm_regulator_bulk_get(ctx->panel.dev, ARRAY_SIZE(ctx->supplies),
|
|
ctx->supplies);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ctx->reset_gpio = devm_gpiod_get(ctx->panel.dev,
|
|
"reset", GPIOD_OUT_LOW);
|
|
if (IS_ERR(ctx->reset_gpio)) {
|
|
dev_err(dev, "cannot get reset gpio %ld\n", PTR_ERR(ctx->reset_gpio));
|
|
return PTR_ERR(ctx->reset_gpio);
|
|
}
|
|
|
|
drm_panel_init(&ctx->panel, dev, &visionox_rm69299_drm_funcs,
|
|
DRM_MODE_CONNECTOR_DSI);
|
|
ctx->panel.dev = dev;
|
|
ctx->panel.funcs = &visionox_rm69299_drm_funcs;
|
|
drm_panel_add(&ctx->panel);
|
|
|
|
dsi->lanes = 4;
|
|
dsi->format = MIPI_DSI_FMT_RGB888;
|
|
dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_LPM |
|
|
MIPI_DSI_CLOCK_NON_CONTINUOUS;
|
|
ret = mipi_dsi_attach(dsi);
|
|
if (ret < 0) {
|
|
dev_err(dev, "dsi attach failed ret = %d\n", ret);
|
|
goto err_dsi_attach;
|
|
}
|
|
|
|
ret = regulator_set_load(ctx->supplies[0].consumer, 32000);
|
|
if (ret) {
|
|
dev_err(dev, "regulator set load failed for vdda supply ret = %d\n", ret);
|
|
goto err_set_load;
|
|
}
|
|
|
|
ret = regulator_set_load(ctx->supplies[1].consumer, 13200);
|
|
if (ret) {
|
|
dev_err(dev, "regulator set load failed for vdd3p3 supply ret = %d\n", ret);
|
|
goto err_set_load;
|
|
}
|
|
|
|
return 0;
|
|
|
|
err_set_load:
|
|
mipi_dsi_detach(dsi);
|
|
err_dsi_attach:
|
|
drm_panel_remove(&ctx->panel);
|
|
return ret;
|
|
}
|
|
|
|
static void visionox_rm69299_remove(struct mipi_dsi_device *dsi)
|
|
{
|
|
struct visionox_rm69299 *ctx = mipi_dsi_get_drvdata(dsi);
|
|
|
|
mipi_dsi_detach(ctx->dsi);
|
|
mipi_dsi_device_unregister(ctx->dsi);
|
|
|
|
drm_panel_remove(&ctx->panel);
|
|
}
|
|
|
|
static const struct of_device_id visionox_rm69299_of_match[] = {
|
|
{ .compatible = "visionox,rm69299-1080p-display", },
|
|
{ /* sentinel */ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, visionox_rm69299_of_match);
|
|
|
|
static struct mipi_dsi_driver visionox_rm69299_driver = {
|
|
.driver = {
|
|
.name = "panel-visionox-rm69299",
|
|
.of_match_table = visionox_rm69299_of_match,
|
|
},
|
|
.probe = visionox_rm69299_probe,
|
|
.remove = visionox_rm69299_remove,
|
|
};
|
|
module_mipi_dsi_driver(visionox_rm69299_driver);
|
|
|
|
MODULE_DESCRIPTION("Visionox RM69299 DSI Panel Driver");
|
|
MODULE_LICENSE("GPL v2");
|