mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-27 21:14:44 +08:00
23c0c210a1
The only adc button connected to adc input is recovery button. Signed-off-by: Randy Li <ayaka@soulik.info> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
615 lines
13 KiB
Plaintext
615 lines
13 KiB
Plaintext
/*
|
|
* Copyright (c) 2014, 2015 FUKAUMI Naoki <naobsd@gmail.com>
|
|
*
|
|
* This file is dual-licensed: you can use it either under the terms
|
|
* of the GPL or the X11 license, at your option. Note that this dual
|
|
* licensing only applies to this file, and not this project as a
|
|
* whole.
|
|
*
|
|
* a) This file is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of the
|
|
* License, or (at your option) any later version.
|
|
*
|
|
* This file is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* Or, alternatively,
|
|
*
|
|
* b) Permission is hereby granted, free of charge, to any person
|
|
* obtaining a copy of this software and associated documentation
|
|
* files (the "Software"), to deal in the Software without
|
|
* restriction, including without limitation the rights to use,
|
|
* copy, modify, merge, publish, distribute, sublicense, and/or
|
|
* sell copies of the Software, and to permit persons to whom the
|
|
* Software is furnished to do so, subject to the following
|
|
* conditions:
|
|
*
|
|
* The above copyright notice and this permission notice shall be
|
|
* included in all copies or substantial portions of the Software.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
|
|
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
|
|
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
|
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
|
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
|
|
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
|
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
|
* OTHER DEALINGS IN THE SOFTWARE.
|
|
*/
|
|
|
|
#include <dt-bindings/input/input.h>
|
|
#include "rk3288.dtsi"
|
|
|
|
/ {
|
|
memory@0 {
|
|
device_type = "memory";
|
|
reg = <0 0x80000000>;
|
|
};
|
|
|
|
adc-keys {
|
|
compatible = "adc-keys";
|
|
io-channels = <&saradc 1>;
|
|
io-channel-names = "buttons";
|
|
keyup-threshold-microvolt = <1800000>;
|
|
|
|
button-recovery {
|
|
label = "Recovery";
|
|
linux,code = <KEY_VENDOR>;
|
|
press-threshold-microvolt = <0>;
|
|
};
|
|
};
|
|
|
|
dovdd_1v8: dovdd-1v8-regulator {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "dovdd_1v8";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
vin-supply = <&vcc28_dvp>;
|
|
};
|
|
|
|
ext_gmac: external-gmac-clock {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <125000000>;
|
|
clock-output-names = "ext_gmac";
|
|
};
|
|
|
|
ir: ir-receiver {
|
|
compatible = "gpio-ir-receiver";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&ir_int>;
|
|
};
|
|
|
|
keys: gpio-keys {
|
|
compatible = "gpio-keys";
|
|
|
|
power {
|
|
wakeup-source;
|
|
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
|
|
label = "GPIO Power";
|
|
linux,code = <KEY_POWER>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pwr_key>;
|
|
};
|
|
};
|
|
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
|
|
work {
|
|
gpios = <&gpio8 RK_PA1 GPIO_ACTIVE_LOW>;
|
|
label = "firefly:blue:user";
|
|
linux,default-trigger = "rc-feedback";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&work_led>;
|
|
};
|
|
|
|
power {
|
|
gpios = <&gpio8 RK_PA2 GPIO_ACTIVE_LOW>;
|
|
label = "firefly:green:power";
|
|
linux,default-trigger = "default-on";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&power_led>;
|
|
};
|
|
};
|
|
|
|
vbat_wl: vcc_sys: vsys-regulator {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc_sys";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
vcc_sd: sdmmc-regulator {
|
|
compatible = "regulator-fixed";
|
|
gpio = <&gpio7 RK_PB3 GPIO_ACTIVE_LOW>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&sdmmc_pwr>;
|
|
regulator-name = "vcc_sd";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
startup-delay-us = <100000>;
|
|
vin-supply = <&vcc_io>;
|
|
};
|
|
|
|
vcc_flash: flash-regulator {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc_flash";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
vin-supply = <&vcc_io>;
|
|
};
|
|
|
|
vcc_5v: usb-regulator {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc_5v";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
vin-supply = <&vcc_sys>;
|
|
};
|
|
|
|
vcc_host_5v: usb-host-regulator {
|
|
compatible = "regulator-fixed";
|
|
enable-active-high;
|
|
gpio = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&host_vbus_drv>;
|
|
regulator-name = "vcc_host_5v";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
regulator-always-on;
|
|
vin-supply = <&vcc_5v>;
|
|
};
|
|
|
|
vcc_otg_5v: usb-otg-regulator {
|
|
compatible = "regulator-fixed";
|
|
enable-active-high;
|
|
gpio = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&otg_vbus_drv>;
|
|
regulator-name = "vcc_otg_5v";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
regulator-always-on;
|
|
vin-supply = <&vcc_5v>;
|
|
};
|
|
|
|
/*
|
|
* A TT8142 creates both dovdd_1v8 and vcc28_dvp, controlled
|
|
* by the dvp_pwr pin.
|
|
*/
|
|
vcc28_dvp: vcc28-dvp-regulator {
|
|
compatible = "regulator-fixed";
|
|
enable-active-high;
|
|
gpio = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&dvp_pwr>;
|
|
regulator-name = "vcc28_dvp";
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
regulator-always-on;
|
|
vin-supply = <&vcc_io>;
|
|
};
|
|
};
|
|
|
|
&cpu0 {
|
|
cpu0-supply = <&vdd_cpu>;
|
|
};
|
|
|
|
&emmc {
|
|
bus-width = <8>;
|
|
cap-mmc-highspeed;
|
|
disable-wp;
|
|
non-removable;
|
|
num-slots = <1>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_pwr>, <&emmc_bus8>;
|
|
vmmc-supply = <&vcc_io>;
|
|
vqmmc-supply = <&vcc_flash>;
|
|
status = "okay";
|
|
};
|
|
|
|
&gmac {
|
|
assigned-clocks = <&cru SCLK_MAC>;
|
|
assigned-clock-parents = <&ext_gmac>;
|
|
clock_in_out = "input";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&rgmii_pins>, <&phy_rst>, <&phy_pmeb>, <&phy_int>;
|
|
phy-supply = <&vcc_lan>;
|
|
phy-mode = "rgmii";
|
|
snps,reset-active-low;
|
|
snps,reset-delays-us = <0 10000 1000000>;
|
|
snps,reset-gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_LOW>;
|
|
tx_delay = <0x30>;
|
|
rx_delay = <0x10>;
|
|
status = "ok";
|
|
};
|
|
|
|
&gpu {
|
|
mali-supply = <&vdd_gpu>;
|
|
status = "okay";
|
|
};
|
|
|
|
&hdmi {
|
|
ddc-i2c-bus = <&i2c5>;
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c0 {
|
|
clock-frequency = <400000>;
|
|
status = "okay";
|
|
|
|
vdd_cpu: syr827@40 {
|
|
compatible = "silergy,syr827";
|
|
fcs,suspend-voltage-selector = <1>;
|
|
reg = <0x40>;
|
|
regulator-name = "vdd_cpu";
|
|
regulator-min-microvolt = <850000>;
|
|
regulator-max-microvolt = <1350000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-enable-ramp-delay = <300>;
|
|
regulator-ramp-delay = <8000>;
|
|
vin-supply = <&vcc_sys>;
|
|
};
|
|
|
|
vdd_gpu: syr828@41 {
|
|
compatible = "silergy,syr828";
|
|
fcs,suspend-voltage-selector = <1>;
|
|
reg = <0x41>;
|
|
regulator-name = "vdd_gpu";
|
|
regulator-min-microvolt = <850000>;
|
|
regulator-max-microvolt = <1350000>;
|
|
regulator-always-on;
|
|
vin-supply = <&vcc_sys>;
|
|
};
|
|
|
|
hym8563: hym8563@51 {
|
|
compatible = "haoyu,hym8563";
|
|
reg = <0x51>;
|
|
#clock-cells = <0>;
|
|
clock-frequency = <32768>;
|
|
clock-output-names = "xin32k";
|
|
interrupt-parent = <&gpio7>;
|
|
interrupts = <RK_PA4 IRQ_TYPE_EDGE_FALLING>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&rtc_int>;
|
|
};
|
|
|
|
act8846: act8846@5a {
|
|
compatible = "active-semi,act8846";
|
|
reg = <0x5a>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pmic_vsel>, <&pwr_hold>;
|
|
system-power-controller;
|
|
|
|
vp1-supply = <&vcc_sys>;
|
|
vp2-supply = <&vcc_sys>;
|
|
vp3-supply = <&vcc_sys>;
|
|
vp4-supply = <&vcc_sys>;
|
|
inl1-supply = <&vcc_sys>;
|
|
inl2-supply = <&vcc_sys>;
|
|
inl3-supply = <&vcc_20>;
|
|
|
|
regulators {
|
|
vcc_ddr: REG1 {
|
|
regulator-name = "vcc_ddr";
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vcc_io: REG2 {
|
|
regulator-name = "vcc_io";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vdd_log: REG3 {
|
|
regulator-name = "vdd_log";
|
|
regulator-min-microvolt = <1100000>;
|
|
regulator-max-microvolt = <1100000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vcc_20: REG4 {
|
|
regulator-name = "vcc_20";
|
|
regulator-min-microvolt = <2000000>;
|
|
regulator-max-microvolt = <2000000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vccio_sd: REG5 {
|
|
regulator-name = "vccio_sd";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vdd10_lcd: REG6 {
|
|
regulator-name = "vdd10_lcd";
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <1000000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vcca_18: REG7 {
|
|
regulator-name = "vcca_18";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
};
|
|
|
|
vcca_33: REG8 {
|
|
regulator-name = "vcca_33";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
};
|
|
|
|
vcc_lan: REG9 {
|
|
regulator-name = "vcc_lan";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
};
|
|
|
|
vdd_10: REG10 {
|
|
regulator-name = "vdd_10";
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <1000000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vccio_wl: vcc_18: REG11 {
|
|
regulator-name = "vcc_18";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vcc18_lcd: REG12 {
|
|
regulator-name = "vcc18_lcd";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&i2c1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c2 {
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c4 {
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c5 {
|
|
status = "okay";
|
|
};
|
|
|
|
&io_domains {
|
|
status = "okay";
|
|
|
|
audio-supply = <&vcca_33>;
|
|
bb-supply = <&vcc_io>;
|
|
dvp-supply = <&dovdd_1v8>;
|
|
flash0-supply = <&vcc_flash>;
|
|
flash1-supply = <&vcc_lan>;
|
|
gpio30-supply = <&vcc_io>;
|
|
gpio1830-supply = <&vcc_io>;
|
|
lcdc-supply = <&vcc_io>;
|
|
sdcard-supply = <&vccio_sd>;
|
|
wifi-supply = <&vccio_wl>;
|
|
};
|
|
|
|
&pinctrl {
|
|
pcfg_output_high: pcfg-output-high {
|
|
output-high;
|
|
};
|
|
|
|
pcfg_output_low: pcfg-output-low {
|
|
output-low;
|
|
};
|
|
|
|
pcfg_pull_up_drv_12ma: pcfg-pull-up-drv-12ma {
|
|
bias-pull-up;
|
|
drive-strength = <12>;
|
|
};
|
|
|
|
act8846 {
|
|
pwr_hold: pwr-hold {
|
|
rockchip,pins = <0 1 RK_FUNC_GPIO &pcfg_output_high>;
|
|
};
|
|
};
|
|
|
|
dvp {
|
|
dvp_pwr: dvp-pwr {
|
|
rockchip,pins = <0 11 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
gmac {
|
|
phy_int: phy-int {
|
|
rockchip,pins = <0 9 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
};
|
|
|
|
phy_pmeb: phy-pmeb {
|
|
rockchip,pins = <0 8 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
};
|
|
|
|
phy_rst: phy-rst {
|
|
rockchip,pins = <4 8 RK_FUNC_GPIO &pcfg_output_high>;
|
|
};
|
|
};
|
|
|
|
hym8563 {
|
|
rtc_int: rtc-int {
|
|
rockchip,pins = <7 4 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
};
|
|
};
|
|
|
|
keys {
|
|
pwr_key: pwr-key {
|
|
rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
};
|
|
};
|
|
|
|
leds {
|
|
power_led: power-led {
|
|
rockchip,pins = <8 2 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
|
|
work_led: work-led {
|
|
rockchip,pins = <8 1 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
sdmmc {
|
|
/*
|
|
* Default drive strength isn't enough to achieve even
|
|
* high-speed mode on firefly board so bump up to 12ma.
|
|
*/
|
|
sdmmc_bus4: sdmmc-bus4 {
|
|
rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_up_drv_12ma>,
|
|
<6 17 RK_FUNC_1 &pcfg_pull_up_drv_12ma>,
|
|
<6 18 RK_FUNC_1 &pcfg_pull_up_drv_12ma>,
|
|
<6 19 RK_FUNC_1 &pcfg_pull_up_drv_12ma>;
|
|
};
|
|
|
|
sdmmc_clk: sdmmc-clk {
|
|
rockchip,pins = <6 20 RK_FUNC_1 &pcfg_pull_none_12ma>;
|
|
};
|
|
|
|
sdmmc_cmd: sdmmc-cmd {
|
|
rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_up_drv_12ma>;
|
|
};
|
|
|
|
sdmmc_pwr: sdmmc-pwr {
|
|
rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
usb_host {
|
|
host_vbus_drv: host-vbus-drv {
|
|
rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
|
|
usbhub_rst: usbhub-rst {
|
|
rockchip,pins = <8 3 RK_FUNC_GPIO &pcfg_output_high>;
|
|
};
|
|
};
|
|
|
|
usb_otg {
|
|
otg_vbus_drv: otg-vbus-drv {
|
|
rockchip,pins = <0 12 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&saradc {
|
|
vref-supply = <&vcc_18>;
|
|
status = "okay";
|
|
};
|
|
|
|
&sdio0 {
|
|
bus-width = <4>;
|
|
disable-wp;
|
|
non-removable;
|
|
num-slots = <1>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&sdio0_bus4>, <&sdio0_cmd>, <&sdio0_clk>;
|
|
vmmc-supply = <&vbat_wl>;
|
|
vqmmc-supply = <&vccio_wl>;
|
|
status = "okay";
|
|
};
|
|
|
|
&sdmmc {
|
|
bus-width = <4>;
|
|
cap-mmc-highspeed;
|
|
cap-sd-highspeed;
|
|
card-detect-delay = <200>;
|
|
disable-wp;
|
|
num-slots = <1>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&sdmmc_clk>, <&sdmmc_cmd>, <&sdmmc_cd>, <&sdmmc_bus4>;
|
|
vmmc-supply = <&vcc_sd>;
|
|
vqmmc-supply = <&vccio_sd>;
|
|
status = "okay";
|
|
};
|
|
|
|
&spi0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&spi0_clk>, <&spi0_cs0>, <&spi0_tx>, <&spi0_rx>, <&spi0_cs1>;
|
|
status = "okay";
|
|
};
|
|
|
|
&tsadc {
|
|
rockchip,hw-tshut-mode = <0>;
|
|
rockchip,hw-tshut-polarity = <0>;
|
|
status = "okay";
|
|
};
|
|
|
|
&uart0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart0_xfer>, <&uart0_cts>, <&uart0_rts>;
|
|
status = "okay";
|
|
};
|
|
|
|
&uart1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&uart2 {
|
|
status = "okay";
|
|
};
|
|
|
|
&uart3 {
|
|
status = "okay";
|
|
};
|
|
|
|
&usbphy {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_host1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&usbhub_rst>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_otg {
|
|
status = "okay";
|
|
};
|
|
|
|
&vopb {
|
|
status = "okay";
|
|
};
|
|
|
|
&vopb_mmu {
|
|
status = "okay";
|
|
};
|
|
|
|
&vopl {
|
|
status = "okay";
|
|
};
|
|
|
|
&vopl_mmu {
|
|
status = "okay";
|
|
};
|
|
|
|
&wdt {
|
|
status = "okay";
|
|
};
|