mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-29 22:14:41 +08:00
c715909b61
The right string is msm8660 and there is also apq8060, but not apq8660, so fix this. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
616 lines
15 KiB
Plaintext
616 lines
15 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0
|
|
/dts-v1/;
|
|
|
|
/include/ "skeleton.dtsi"
|
|
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
#include <dt-bindings/clock/qcom,gcc-msm8660.h>
|
|
#include <dt-bindings/soc/qcom,gsbi.h>
|
|
|
|
/ {
|
|
model = "Qualcomm MSM8660";
|
|
compatible = "qcom,msm8660";
|
|
interrupt-parent = <&intc>;
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
cpu@0 {
|
|
compatible = "qcom,scorpion";
|
|
enable-method = "qcom,gcc-msm8660";
|
|
device_type = "cpu";
|
|
reg = <0>;
|
|
next-level-cache = <&L2>;
|
|
};
|
|
|
|
cpu@1 {
|
|
compatible = "qcom,scorpion";
|
|
enable-method = "qcom,gcc-msm8660";
|
|
device_type = "cpu";
|
|
reg = <1>;
|
|
next-level-cache = <&L2>;
|
|
};
|
|
|
|
L2: l2-cache {
|
|
compatible = "cache";
|
|
cache-level = <2>;
|
|
};
|
|
};
|
|
|
|
cpu-pmu {
|
|
compatible = "qcom,scorpion-mp-pmu";
|
|
interrupts = <1 9 0x304>;
|
|
};
|
|
|
|
clocks {
|
|
cxo_board {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <19200000>;
|
|
};
|
|
|
|
pxo_board {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <27000000>;
|
|
};
|
|
|
|
sleep_clk {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <32768>;
|
|
};
|
|
};
|
|
|
|
/*
|
|
* These channels from the ADC are simply hardware monitors.
|
|
* That is why the ADC is referred to as "HKADC" - HouseKeeping
|
|
* ADC.
|
|
*/
|
|
iio-hwmon {
|
|
compatible = "iio-hwmon";
|
|
io-channels = <&xoadc 0x00 0x01>, /* Battery */
|
|
<&xoadc 0x00 0x02>, /* DC in (charger) */
|
|
<&xoadc 0x00 0x04>, /* VPH the main system voltage */
|
|
<&xoadc 0x00 0x0b>, /* Die temperature */
|
|
<&xoadc 0x00 0x0c>, /* Reference voltage 1.25V */
|
|
<&xoadc 0x00 0x0d>, /* Reference voltage 0.625V */
|
|
<&xoadc 0x00 0x0e>; /* Reference voltage 0.325V */
|
|
};
|
|
|
|
soc: soc {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
compatible = "simple-bus";
|
|
|
|
intc: interrupt-controller@2080000 {
|
|
compatible = "qcom,msm-8660-qgic";
|
|
interrupt-controller;
|
|
#interrupt-cells = <3>;
|
|
reg = < 0x02080000 0x1000 >,
|
|
< 0x02081000 0x1000 >;
|
|
};
|
|
|
|
timer@2000000 {
|
|
compatible = "qcom,scss-timer", "qcom,msm-timer";
|
|
interrupts = <1 0 0x301>,
|
|
<1 1 0x301>,
|
|
<1 2 0x301>;
|
|
reg = <0x02000000 0x100>;
|
|
clock-frequency = <27000000>,
|
|
<32768>;
|
|
cpu-offset = <0x40000>;
|
|
};
|
|
|
|
tlmm: pinctrl@800000 {
|
|
compatible = "qcom,msm8660-pinctrl";
|
|
reg = <0x800000 0x4000>;
|
|
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupts = <0 16 0x4>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
|
|
};
|
|
|
|
gcc: clock-controller@900000 {
|
|
compatible = "qcom,gcc-msm8660";
|
|
#clock-cells = <1>;
|
|
#reset-cells = <1>;
|
|
reg = <0x900000 0x4000>;
|
|
};
|
|
|
|
gsbi6: gsbi@16500000 {
|
|
compatible = "qcom,gsbi-v1.0.0";
|
|
cell-index = <12>;
|
|
reg = <0x16500000 0x100>;
|
|
clocks = <&gcc GSBI6_H_CLK>;
|
|
clock-names = "iface";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
syscon-tcsr = <&tcsr>;
|
|
|
|
gsbi6_serial: serial@16540000 {
|
|
compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
|
|
reg = <0x16540000 0x1000>,
|
|
<0x16500000 0x1000>;
|
|
interrupts = <GIC_SPI 156 IRQ_TYPE_NONE>;
|
|
clocks = <&gcc GSBI6_UART_CLK>, <&gcc GSBI6_H_CLK>;
|
|
clock-names = "core", "iface";
|
|
status = "disabled";
|
|
};
|
|
|
|
gsbi6_i2c: i2c@16580000 {
|
|
compatible = "qcom,i2c-qup-v1.1.1";
|
|
reg = <0x16580000 0x1000>;
|
|
interrupts = <GIC_SPI 157 IRQ_TYPE_NONE>;
|
|
clocks = <&gcc GSBI6_QUP_CLK>, <&gcc GSBI6_H_CLK>;
|
|
clock-names = "core", "iface";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
gsbi7: gsbi@16600000 {
|
|
compatible = "qcom,gsbi-v1.0.0";
|
|
cell-index = <12>;
|
|
reg = <0x16600000 0x100>;
|
|
clocks = <&gcc GSBI7_H_CLK>;
|
|
clock-names = "iface";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
syscon-tcsr = <&tcsr>;
|
|
|
|
gsbi7_serial: serial@16640000 {
|
|
compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
|
|
reg = <0x16640000 0x1000>,
|
|
<0x16600000 0x1000>;
|
|
interrupts = <GIC_SPI 158 IRQ_TYPE_NONE>;
|
|
clocks = <&gcc GSBI7_UART_CLK>, <&gcc GSBI7_H_CLK>;
|
|
clock-names = "core", "iface";
|
|
status = "disabled";
|
|
};
|
|
|
|
gsbi7_i2c: i2c@16680000 {
|
|
compatible = "qcom,i2c-qup-v1.1.1";
|
|
reg = <0x16680000 0x1000>;
|
|
interrupts = <GIC_SPI 159 IRQ_TYPE_NONE>;
|
|
clocks = <&gcc GSBI7_QUP_CLK>, <&gcc GSBI7_H_CLK>;
|
|
clock-names = "core", "iface";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
gsbi8: gsbi@19800000 {
|
|
compatible = "qcom,gsbi-v1.0.0";
|
|
cell-index = <12>;
|
|
reg = <0x19800000 0x100>;
|
|
clocks = <&gcc GSBI8_H_CLK>;
|
|
clock-names = "iface";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
syscon-tcsr = <&tcsr>;
|
|
|
|
gsbi8_i2c: i2c@19880000 {
|
|
compatible = "qcom,i2c-qup-v1.1.1";
|
|
reg = <0x19880000 0x1000>;
|
|
interrupts = <GIC_SPI 161 IRQ_TYPE_NONE>;
|
|
clocks = <&gcc GSBI8_QUP_CLK>, <&gcc GSBI8_H_CLK>;
|
|
clock-names = "core", "iface";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
gsbi12: gsbi@19c00000 {
|
|
compatible = "qcom,gsbi-v1.0.0";
|
|
cell-index = <12>;
|
|
reg = <0x19c00000 0x100>;
|
|
clocks = <&gcc GSBI12_H_CLK>;
|
|
clock-names = "iface";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
syscon-tcsr = <&tcsr>;
|
|
|
|
gsbi12_serial: serial@19c40000 {
|
|
compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
|
|
reg = <0x19c40000 0x1000>,
|
|
<0x19c00000 0x1000>;
|
|
interrupts = <0 195 IRQ_TYPE_NONE>;
|
|
clocks = <&gcc GSBI12_UART_CLK>, <&gcc GSBI12_H_CLK>;
|
|
clock-names = "core", "iface";
|
|
status = "disabled";
|
|
};
|
|
|
|
gsbi12_i2c: i2c@19c80000 {
|
|
compatible = "qcom,i2c-qup-v1.1.1";
|
|
reg = <0x19c80000 0x1000>;
|
|
interrupts = <0 196 IRQ_TYPE_NONE>;
|
|
clocks = <&gcc GSBI12_QUP_CLK>, <&gcc GSBI12_H_CLK>;
|
|
clock-names = "core", "iface";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
external-bus@1a100000 {
|
|
compatible = "qcom,msm8660-ebi2";
|
|
#address-cells = <2>;
|
|
#size-cells = <1>;
|
|
ranges = <0 0x0 0x1a800000 0x00800000>,
|
|
<1 0x0 0x1b000000 0x00800000>,
|
|
<2 0x0 0x1b800000 0x00800000>,
|
|
<3 0x0 0x1d000000 0x08000000>,
|
|
<4 0x0 0x1c800000 0x00800000>,
|
|
<5 0x0 0x1c000000 0x00800000>;
|
|
reg = <0x1a100000 0x1000>, <0x1a110000 0x1000>;
|
|
reg-names = "ebi2", "xmem";
|
|
clocks = <&gcc EBI2_2X_CLK>, <&gcc EBI2_CLK>;
|
|
clock-names = "ebi2x", "ebi2";
|
|
status = "disabled";
|
|
};
|
|
|
|
qcom,ssbi@500000 {
|
|
compatible = "qcom,ssbi";
|
|
reg = <0x500000 0x1000>;
|
|
qcom,controller-type = "pmic-arbiter";
|
|
|
|
pm8058: pmic@0 {
|
|
compatible = "qcom,pm8058";
|
|
interrupt-parent = <&tlmm>;
|
|
interrupts = <88 8>;
|
|
#interrupt-cells = <2>;
|
|
interrupt-controller;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
pm8058_gpio: gpio@150 {
|
|
compatible = "qcom,pm8058-gpio",
|
|
"qcom,ssbi-gpio";
|
|
reg = <0x150>;
|
|
interrupt-parent = <&pm8058>;
|
|
interrupts = <192 IRQ_TYPE_NONE>,
|
|
<193 IRQ_TYPE_NONE>,
|
|
<194 IRQ_TYPE_NONE>,
|
|
<195 IRQ_TYPE_NONE>,
|
|
<196 IRQ_TYPE_NONE>,
|
|
<197 IRQ_TYPE_NONE>,
|
|
<198 IRQ_TYPE_NONE>,
|
|
<199 IRQ_TYPE_NONE>,
|
|
<200 IRQ_TYPE_NONE>,
|
|
<201 IRQ_TYPE_NONE>,
|
|
<202 IRQ_TYPE_NONE>,
|
|
<203 IRQ_TYPE_NONE>,
|
|
<204 IRQ_TYPE_NONE>,
|
|
<205 IRQ_TYPE_NONE>,
|
|
<206 IRQ_TYPE_NONE>,
|
|
<207 IRQ_TYPE_NONE>,
|
|
<208 IRQ_TYPE_NONE>,
|
|
<209 IRQ_TYPE_NONE>,
|
|
<210 IRQ_TYPE_NONE>,
|
|
<211 IRQ_TYPE_NONE>,
|
|
<212 IRQ_TYPE_NONE>,
|
|
<213 IRQ_TYPE_NONE>,
|
|
<214 IRQ_TYPE_NONE>,
|
|
<215 IRQ_TYPE_NONE>,
|
|
<216 IRQ_TYPE_NONE>,
|
|
<217 IRQ_TYPE_NONE>,
|
|
<218 IRQ_TYPE_NONE>,
|
|
<219 IRQ_TYPE_NONE>,
|
|
<220 IRQ_TYPE_NONE>,
|
|
<221 IRQ_TYPE_NONE>,
|
|
<222 IRQ_TYPE_NONE>,
|
|
<223 IRQ_TYPE_NONE>,
|
|
<224 IRQ_TYPE_NONE>,
|
|
<225 IRQ_TYPE_NONE>,
|
|
<226 IRQ_TYPE_NONE>,
|
|
<227 IRQ_TYPE_NONE>,
|
|
<228 IRQ_TYPE_NONE>,
|
|
<229 IRQ_TYPE_NONE>,
|
|
<230 IRQ_TYPE_NONE>,
|
|
<231 IRQ_TYPE_NONE>,
|
|
<232 IRQ_TYPE_NONE>,
|
|
<233 IRQ_TYPE_NONE>,
|
|
<234 IRQ_TYPE_NONE>,
|
|
<235 IRQ_TYPE_NONE>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
|
|
};
|
|
|
|
pm8058_mpps: mpps@50 {
|
|
compatible = "qcom,pm8058-mpp",
|
|
"qcom,ssbi-mpp";
|
|
reg = <0x50>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-parent = <&pm8058>;
|
|
interrupts =
|
|
<128 IRQ_TYPE_NONE>,
|
|
<129 IRQ_TYPE_NONE>,
|
|
<130 IRQ_TYPE_NONE>,
|
|
<131 IRQ_TYPE_NONE>,
|
|
<132 IRQ_TYPE_NONE>,
|
|
<133 IRQ_TYPE_NONE>,
|
|
<134 IRQ_TYPE_NONE>,
|
|
<135 IRQ_TYPE_NONE>,
|
|
<136 IRQ_TYPE_NONE>,
|
|
<137 IRQ_TYPE_NONE>,
|
|
<138 IRQ_TYPE_NONE>,
|
|
<139 IRQ_TYPE_NONE>;
|
|
};
|
|
|
|
pwrkey@1c {
|
|
compatible = "qcom,pm8058-pwrkey";
|
|
reg = <0x1c>;
|
|
interrupt-parent = <&pm8058>;
|
|
interrupts = <50 1>, <51 1>;
|
|
debounce = <15625>;
|
|
pull-up;
|
|
};
|
|
|
|
keypad@148 {
|
|
compatible = "qcom,pm8058-keypad";
|
|
reg = <0x148>;
|
|
interrupt-parent = <&pm8058>;
|
|
interrupts = <74 1>, <75 1>;
|
|
debounce = <15>;
|
|
scan-delay = <32>;
|
|
row-hold = <91500>;
|
|
};
|
|
|
|
xoadc: xoadc@197 {
|
|
compatible = "qcom,pm8058-adc";
|
|
reg = <0x197>;
|
|
interrupts-extended = <&pm8058 76 IRQ_TYPE_EDGE_RISING>;
|
|
#address-cells = <2>;
|
|
#size-cells = <0>;
|
|
#io-channel-cells = <2>;
|
|
|
|
vcoin: adc-channel@0 {
|
|
reg = <0x00 0x00>;
|
|
};
|
|
vbat: adc-channel@1 {
|
|
reg = <0x00 0x01>;
|
|
};
|
|
dcin: adc-channel@2 {
|
|
reg = <0x00 0x02>;
|
|
};
|
|
ichg: adc-channel@3 {
|
|
reg = <0x00 0x03>;
|
|
};
|
|
vph_pwr: adc-channel@4 {
|
|
reg = <0x00 0x04>;
|
|
};
|
|
usb_vbus: adc-channel@a {
|
|
reg = <0x00 0x0a>;
|
|
};
|
|
die_temp: adc-channel@b {
|
|
reg = <0x00 0x0b>;
|
|
};
|
|
ref_625mv: adc-channel@c {
|
|
reg = <0x00 0x0c>;
|
|
};
|
|
ref_1250mv: adc-channel@d {
|
|
reg = <0x00 0x0d>;
|
|
};
|
|
ref_325mv: adc-channel@e {
|
|
reg = <0x00 0x0e>;
|
|
};
|
|
ref_muxoff: adc-channel@f {
|
|
reg = <0x00 0x0f>;
|
|
};
|
|
};
|
|
|
|
rtc@1e8 {
|
|
compatible = "qcom,pm8058-rtc";
|
|
reg = <0x1e8>;
|
|
interrupt-parent = <&pm8058>;
|
|
interrupts = <39 1>;
|
|
allow-set-time;
|
|
};
|
|
|
|
vibrator@4a {
|
|
compatible = "qcom,pm8058-vib";
|
|
reg = <0x4a>;
|
|
};
|
|
};
|
|
};
|
|
|
|
l2cc: clock-controller@2082000 {
|
|
compatible = "syscon";
|
|
reg = <0x02082000 0x1000>;
|
|
};
|
|
|
|
rpm: rpm@104000 {
|
|
compatible = "qcom,rpm-msm8660";
|
|
reg = <0x00104000 0x1000>;
|
|
qcom,ipc = <&l2cc 0x8 2>;
|
|
|
|
interrupts = <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
|
|
interrupt-names = "ack", "err", "wakeup";
|
|
clocks = <&gcc RPM_MSG_RAM_H_CLK>;
|
|
clock-names = "ram";
|
|
|
|
rpmcc: clock-controller {
|
|
compatible = "qcom,rpmcc-msm8660", "qcom,rpmcc";
|
|
#clock-cells = <1>;
|
|
};
|
|
|
|
pm8901-regulators {
|
|
compatible = "qcom,rpm-pm8901-regulators";
|
|
|
|
pm8901_l0: l0 {};
|
|
pm8901_l1: l1 {};
|
|
pm8901_l2: l2 {};
|
|
pm8901_l3: l3 {};
|
|
pm8901_l4: l4 {};
|
|
pm8901_l5: l5 {};
|
|
pm8901_l6: l6 {};
|
|
|
|
/* S0 and S1 Handled as SAW regulators by SPM */
|
|
pm8901_s2: s2 {};
|
|
pm8901_s3: s3 {};
|
|
pm8901_s4: s4 {};
|
|
|
|
pm8901_lvs0: lvs0 {};
|
|
pm8901_lvs1: lvs1 {};
|
|
pm8901_lvs2: lvs2 {};
|
|
pm8901_lvs3: lvs3 {};
|
|
|
|
pm8901_mvs: mvs {};
|
|
};
|
|
|
|
pm8058-regulators {
|
|
compatible = "qcom,rpm-pm8058-regulators";
|
|
|
|
pm8058_l0: l0 {};
|
|
pm8058_l1: l1 {};
|
|
pm8058_l2: l2 {};
|
|
pm8058_l3: l3 {};
|
|
pm8058_l4: l4 {};
|
|
pm8058_l5: l5 {};
|
|
pm8058_l6: l6 {};
|
|
pm8058_l7: l7 {};
|
|
pm8058_l8: l8 {};
|
|
pm8058_l9: l9 {};
|
|
pm8058_l10: l10 {};
|
|
pm8058_l11: l11 {};
|
|
pm8058_l12: l12 {};
|
|
pm8058_l13: l13 {};
|
|
pm8058_l14: l14 {};
|
|
pm8058_l15: l15 {};
|
|
pm8058_l16: l16 {};
|
|
pm8058_l17: l17 {};
|
|
pm8058_l18: l18 {};
|
|
pm8058_l19: l19 {};
|
|
pm8058_l20: l20 {};
|
|
pm8058_l21: l21 {};
|
|
pm8058_l22: l22 {};
|
|
pm8058_l23: l23 {};
|
|
pm8058_l24: l24 {};
|
|
pm8058_l25: l25 {};
|
|
|
|
pm8058_s0: s0 {};
|
|
pm8058_s1: s1 {};
|
|
pm8058_s2: s2 {};
|
|
pm8058_s3: s3 {};
|
|
pm8058_s4: s4 {};
|
|
|
|
pm8058_lvs0: lvs0 {};
|
|
pm8058_lvs1: lvs1 {};
|
|
|
|
pm8058_ncp: ncp {};
|
|
};
|
|
};
|
|
|
|
amba {
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
sdcc1: sdcc@12400000 {
|
|
status = "disabled";
|
|
compatible = "arm,pl18x", "arm,primecell";
|
|
arm,primecell-periphid = <0x00051180>;
|
|
reg = <0x12400000 0x8000>;
|
|
interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "cmd_irq";
|
|
clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
|
|
clock-names = "mclk", "apb_pclk";
|
|
bus-width = <8>;
|
|
max-frequency = <48000000>;
|
|
non-removable;
|
|
cap-sd-highspeed;
|
|
cap-mmc-highspeed;
|
|
};
|
|
|
|
sdcc2: sdcc@12140000 {
|
|
status = "disabled";
|
|
compatible = "arm,pl18x", "arm,primecell";
|
|
arm,primecell-periphid = <0x00051180>;
|
|
reg = <0x12140000 0x8000>;
|
|
interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "cmd_irq";
|
|
clocks = <&gcc SDC2_CLK>, <&gcc SDC2_H_CLK>;
|
|
clock-names = "mclk", "apb_pclk";
|
|
bus-width = <8>;
|
|
max-frequency = <48000000>;
|
|
cap-sd-highspeed;
|
|
cap-mmc-highspeed;
|
|
};
|
|
|
|
sdcc3: sdcc@12180000 {
|
|
compatible = "arm,pl18x", "arm,primecell";
|
|
arm,primecell-periphid = <0x00051180>;
|
|
status = "disabled";
|
|
reg = <0x12180000 0x8000>;
|
|
interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "cmd_irq";
|
|
clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
|
|
clock-names = "mclk", "apb_pclk";
|
|
bus-width = <4>;
|
|
cap-sd-highspeed;
|
|
cap-mmc-highspeed;
|
|
max-frequency = <48000000>;
|
|
no-1-8-v;
|
|
};
|
|
|
|
sdcc4: sdcc@121c0000 {
|
|
compatible = "arm,pl18x", "arm,primecell";
|
|
arm,primecell-periphid = <0x00051180>;
|
|
status = "disabled";
|
|
reg = <0x121c0000 0x8000>;
|
|
interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "cmd_irq";
|
|
clocks = <&gcc SDC4_CLK>, <&gcc SDC4_H_CLK>;
|
|
clock-names = "mclk", "apb_pclk";
|
|
bus-width = <4>;
|
|
max-frequency = <48000000>;
|
|
cap-sd-highspeed;
|
|
cap-mmc-highspeed;
|
|
};
|
|
|
|
sdcc5: sdcc@12200000 {
|
|
compatible = "arm,pl18x", "arm,primecell";
|
|
arm,primecell-periphid = <0x00051180>;
|
|
status = "disabled";
|
|
reg = <0x12200000 0x8000>;
|
|
interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "cmd_irq";
|
|
clocks = <&gcc SDC5_CLK>, <&gcc SDC5_H_CLK>;
|
|
clock-names = "mclk", "apb_pclk";
|
|
bus-width = <4>;
|
|
cap-sd-highspeed;
|
|
cap-mmc-highspeed;
|
|
max-frequency = <48000000>;
|
|
};
|
|
};
|
|
|
|
tcsr: syscon@1a400000 {
|
|
compatible = "qcom,tcsr-msm8660", "syscon";
|
|
reg = <0x1a400000 0x100>;
|
|
};
|
|
};
|
|
|
|
};
|