mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-29 22:14:41 +08:00
5dd2fe5bcf
dtc now gives the following warnings: arch/arm/boot/dts/omap3-gta04a3.dtb: Warning (sound_dai_property): /sound_telephony/simple-audio-card,cpu: Missing property '#sound-dai-cells' in node /ocp@68000000/mcbsp@49026000 or bad phandle (referred from sound-dai[0]) arch/arm/boot/dts/omap3-gta04a4.dtb: Warning (sound_dai_property): /sound_telephony/simple-audio-card,cpu: Missing property '#sound-dai-cells' in node /ocp@68000000/mcbsp@49026000 or bad phandle (referred from sound-dai[0]) arch/arm/boot/dts/omap3-gta04a5.dtb: Warning (sound_dai_property): /sound_telephony/simple-audio-card,cpu: Missing property '#sound-dai-cells' in node /ocp@68000000/mcbsp@49026000 or bad phandle (referred from sound-dai[0]) Add the missing #sound-dai-cells property. Cc: "Benoît Cousson" <bcousson@baylibre.com> Cc: Tony Lindgren <tony@atomide.com> Cc: linux-omap@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
841 lines
18 KiB
Plaintext
841 lines
18 KiB
Plaintext
/*
|
|
* Device Tree Source for OMAP3 SoC
|
|
*
|
|
* Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
|
|
*
|
|
* This file is licensed under the terms of the GNU General Public License
|
|
* version 2. This program is licensed "as is" without any warranty of any
|
|
* kind, whether express or implied.
|
|
*/
|
|
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
#include <dt-bindings/pinctrl/omap.h>
|
|
|
|
/ {
|
|
compatible = "ti,omap3430", "ti,omap3";
|
|
interrupt-parent = <&intc>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
chosen { };
|
|
|
|
aliases {
|
|
i2c0 = &i2c1;
|
|
i2c1 = &i2c2;
|
|
i2c2 = &i2c3;
|
|
serial0 = &uart1;
|
|
serial1 = &uart2;
|
|
serial2 = &uart3;
|
|
};
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
cpu@0 {
|
|
compatible = "arm,cortex-a8";
|
|
device_type = "cpu";
|
|
reg = <0x0>;
|
|
|
|
clocks = <&dpll1_ck>;
|
|
clock-names = "cpu";
|
|
|
|
clock-latency = <300000>; /* From omap-cpufreq driver */
|
|
};
|
|
};
|
|
|
|
pmu@54000000 {
|
|
compatible = "arm,cortex-a8-pmu";
|
|
reg = <0x54000000 0x800000>;
|
|
interrupts = <3>;
|
|
ti,hwmods = "debugss";
|
|
};
|
|
|
|
/*
|
|
* The soc node represents the soc top level view. It is used for IPs
|
|
* that are not memory mapped in the MPU view or for the MPU itself.
|
|
*/
|
|
soc {
|
|
compatible = "ti,omap-infra";
|
|
mpu {
|
|
compatible = "ti,omap3-mpu";
|
|
ti,hwmods = "mpu";
|
|
};
|
|
|
|
iva: iva {
|
|
compatible = "ti,iva2.2";
|
|
ti,hwmods = "iva";
|
|
|
|
dsp {
|
|
compatible = "ti,omap3-c64";
|
|
};
|
|
};
|
|
};
|
|
|
|
/*
|
|
* XXX: Use a flat representation of the OMAP3 interconnect.
|
|
* The real OMAP interconnect network is quite complex.
|
|
* Since it will not bring real advantage to represent that in DT for
|
|
* the moment, just use a fake OCP bus entry to represent the whole bus
|
|
* hierarchy.
|
|
*/
|
|
ocp@68000000 {
|
|
compatible = "ti,omap3-l3-smx", "simple-bus";
|
|
reg = <0x68000000 0x10000>;
|
|
interrupts = <9 10>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
ti,hwmods = "l3_main";
|
|
|
|
l4_core: l4@48000000 {
|
|
compatible = "ti,omap3-l4-core", "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0 0x48000000 0x1000000>;
|
|
|
|
scm: scm@2000 {
|
|
compatible = "ti,omap3-scm", "simple-bus";
|
|
reg = <0x2000 0x2000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0 0x2000 0x2000>;
|
|
|
|
omap3_pmx_core: pinmux@30 {
|
|
compatible = "ti,omap3-padconf",
|
|
"pinctrl-single";
|
|
reg = <0x30 0x238>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
#pinctrl-cells = <1>;
|
|
#interrupt-cells = <1>;
|
|
interrupt-controller;
|
|
pinctrl-single,register-width = <16>;
|
|
pinctrl-single,function-mask = <0xff1f>;
|
|
};
|
|
|
|
scm_conf: scm_conf@270 {
|
|
compatible = "syscon", "simple-bus";
|
|
reg = <0x270 0x330>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0 0x270 0x330>;
|
|
|
|
pbias_regulator: pbias_regulator@2b0 {
|
|
compatible = "ti,pbias-omap3", "ti,pbias-omap";
|
|
reg = <0x2b0 0x4>;
|
|
syscon = <&scm_conf>;
|
|
pbias_mmc_reg: pbias_mmc_omap2430 {
|
|
regulator-name = "pbias_mmc_omap2430";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
};
|
|
};
|
|
|
|
scm_clocks: clocks {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
};
|
|
|
|
scm_clockdomains: clockdomains {
|
|
};
|
|
|
|
omap3_pmx_wkup: pinmux@a00 {
|
|
compatible = "ti,omap3-padconf",
|
|
"pinctrl-single";
|
|
reg = <0xa00 0x5c>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
#pinctrl-cells = <1>;
|
|
#interrupt-cells = <1>;
|
|
interrupt-controller;
|
|
pinctrl-single,register-width = <16>;
|
|
pinctrl-single,function-mask = <0xff1f>;
|
|
};
|
|
};
|
|
};
|
|
|
|
aes: aes@480c5000 {
|
|
compatible = "ti,omap3-aes";
|
|
ti,hwmods = "aes";
|
|
reg = <0x480c5000 0x50>;
|
|
interrupts = <0>;
|
|
dmas = <&sdma 65 &sdma 66>;
|
|
dma-names = "tx", "rx";
|
|
};
|
|
|
|
prm: prm@48306000 {
|
|
compatible = "ti,omap3-prm";
|
|
reg = <0x48306000 0x4000>;
|
|
interrupts = <11>;
|
|
|
|
prm_clocks: clocks {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
prm_clockdomains: clockdomains {
|
|
};
|
|
};
|
|
|
|
cm: cm@48004000 {
|
|
compatible = "ti,omap3-cm";
|
|
reg = <0x48004000 0x4000>;
|
|
|
|
cm_clocks: clocks {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
cm_clockdomains: clockdomains {
|
|
};
|
|
};
|
|
|
|
counter32k: counter@48320000 {
|
|
compatible = "ti,omap-counter32k";
|
|
reg = <0x48320000 0x20>;
|
|
ti,hwmods = "counter_32k";
|
|
};
|
|
|
|
intc: interrupt-controller@48200000 {
|
|
compatible = "ti,omap3-intc";
|
|
interrupt-controller;
|
|
#interrupt-cells = <1>;
|
|
reg = <0x48200000 0x1000>;
|
|
};
|
|
|
|
sdma: dma-controller@48056000 {
|
|
compatible = "ti,omap3630-sdma", "ti,omap3430-sdma";
|
|
reg = <0x48056000 0x1000>;
|
|
interrupts = <12>,
|
|
<13>,
|
|
<14>,
|
|
<15>;
|
|
#dma-cells = <1>;
|
|
dma-channels = <32>;
|
|
dma-requests = <96>;
|
|
ti,hwmods = "dma";
|
|
};
|
|
|
|
gpio1: gpio@48310000 {
|
|
compatible = "ti,omap3-gpio";
|
|
reg = <0x48310000 0x200>;
|
|
interrupts = <29>;
|
|
ti,hwmods = "gpio1";
|
|
ti,gpio-always-on;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
gpio2: gpio@49050000 {
|
|
compatible = "ti,omap3-gpio";
|
|
reg = <0x49050000 0x200>;
|
|
interrupts = <30>;
|
|
ti,hwmods = "gpio2";
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
gpio3: gpio@49052000 {
|
|
compatible = "ti,omap3-gpio";
|
|
reg = <0x49052000 0x200>;
|
|
interrupts = <31>;
|
|
ti,hwmods = "gpio3";
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
gpio4: gpio@49054000 {
|
|
compatible = "ti,omap3-gpio";
|
|
reg = <0x49054000 0x200>;
|
|
interrupts = <32>;
|
|
ti,hwmods = "gpio4";
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
gpio5: gpio@49056000 {
|
|
compatible = "ti,omap3-gpio";
|
|
reg = <0x49056000 0x200>;
|
|
interrupts = <33>;
|
|
ti,hwmods = "gpio5";
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
gpio6: gpio@49058000 {
|
|
compatible = "ti,omap3-gpio";
|
|
reg = <0x49058000 0x200>;
|
|
interrupts = <34>;
|
|
ti,hwmods = "gpio6";
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
uart1: serial@4806a000 {
|
|
compatible = "ti,omap3-uart";
|
|
reg = <0x4806a000 0x2000>;
|
|
interrupts-extended = <&intc 72>;
|
|
dmas = <&sdma 49 &sdma 50>;
|
|
dma-names = "tx", "rx";
|
|
ti,hwmods = "uart1";
|
|
clock-frequency = <48000000>;
|
|
};
|
|
|
|
uart2: serial@4806c000 {
|
|
compatible = "ti,omap3-uart";
|
|
reg = <0x4806c000 0x400>;
|
|
interrupts-extended = <&intc 73>;
|
|
dmas = <&sdma 51 &sdma 52>;
|
|
dma-names = "tx", "rx";
|
|
ti,hwmods = "uart2";
|
|
clock-frequency = <48000000>;
|
|
};
|
|
|
|
uart3: serial@49020000 {
|
|
compatible = "ti,omap3-uart";
|
|
reg = <0x49020000 0x400>;
|
|
interrupts-extended = <&intc 74>;
|
|
dmas = <&sdma 53 &sdma 54>;
|
|
dma-names = "tx", "rx";
|
|
ti,hwmods = "uart3";
|
|
clock-frequency = <48000000>;
|
|
};
|
|
|
|
i2c1: i2c@48070000 {
|
|
compatible = "ti,omap3-i2c";
|
|
reg = <0x48070000 0x80>;
|
|
interrupts = <56>;
|
|
dmas = <&sdma 27 &sdma 28>;
|
|
dma-names = "tx", "rx";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
ti,hwmods = "i2c1";
|
|
};
|
|
|
|
i2c2: i2c@48072000 {
|
|
compatible = "ti,omap3-i2c";
|
|
reg = <0x48072000 0x80>;
|
|
interrupts = <57>;
|
|
dmas = <&sdma 29 &sdma 30>;
|
|
dma-names = "tx", "rx";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
ti,hwmods = "i2c2";
|
|
};
|
|
|
|
i2c3: i2c@48060000 {
|
|
compatible = "ti,omap3-i2c";
|
|
reg = <0x48060000 0x80>;
|
|
interrupts = <61>;
|
|
dmas = <&sdma 25 &sdma 26>;
|
|
dma-names = "tx", "rx";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
ti,hwmods = "i2c3";
|
|
};
|
|
|
|
mailbox: mailbox@48094000 {
|
|
compatible = "ti,omap3-mailbox";
|
|
ti,hwmods = "mailbox";
|
|
reg = <0x48094000 0x200>;
|
|
interrupts = <26>;
|
|
#mbox-cells = <1>;
|
|
ti,mbox-num-users = <2>;
|
|
ti,mbox-num-fifos = <2>;
|
|
mbox_dsp: dsp {
|
|
ti,mbox-tx = <0 0 0>;
|
|
ti,mbox-rx = <1 0 0>;
|
|
};
|
|
};
|
|
|
|
mcspi1: spi@48098000 {
|
|
compatible = "ti,omap2-mcspi";
|
|
reg = <0x48098000 0x100>;
|
|
interrupts = <65>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
ti,hwmods = "mcspi1";
|
|
ti,spi-num-cs = <4>;
|
|
dmas = <&sdma 35>,
|
|
<&sdma 36>,
|
|
<&sdma 37>,
|
|
<&sdma 38>,
|
|
<&sdma 39>,
|
|
<&sdma 40>,
|
|
<&sdma 41>,
|
|
<&sdma 42>;
|
|
dma-names = "tx0", "rx0", "tx1", "rx1",
|
|
"tx2", "rx2", "tx3", "rx3";
|
|
};
|
|
|
|
mcspi2: spi@4809a000 {
|
|
compatible = "ti,omap2-mcspi";
|
|
reg = <0x4809a000 0x100>;
|
|
interrupts = <66>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
ti,hwmods = "mcspi2";
|
|
ti,spi-num-cs = <2>;
|
|
dmas = <&sdma 43>,
|
|
<&sdma 44>,
|
|
<&sdma 45>,
|
|
<&sdma 46>;
|
|
dma-names = "tx0", "rx0", "tx1", "rx1";
|
|
};
|
|
|
|
mcspi3: spi@480b8000 {
|
|
compatible = "ti,omap2-mcspi";
|
|
reg = <0x480b8000 0x100>;
|
|
interrupts = <91>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
ti,hwmods = "mcspi3";
|
|
ti,spi-num-cs = <2>;
|
|
dmas = <&sdma 15>,
|
|
<&sdma 16>,
|
|
<&sdma 23>,
|
|
<&sdma 24>;
|
|
dma-names = "tx0", "rx0", "tx1", "rx1";
|
|
};
|
|
|
|
mcspi4: spi@480ba000 {
|
|
compatible = "ti,omap2-mcspi";
|
|
reg = <0x480ba000 0x100>;
|
|
interrupts = <48>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
ti,hwmods = "mcspi4";
|
|
ti,spi-num-cs = <1>;
|
|
dmas = <&sdma 70>, <&sdma 71>;
|
|
dma-names = "tx0", "rx0";
|
|
};
|
|
|
|
hdqw1w: 1w@480b2000 {
|
|
compatible = "ti,omap3-1w";
|
|
reg = <0x480b2000 0x1000>;
|
|
interrupts = <58>;
|
|
ti,hwmods = "hdq1w";
|
|
};
|
|
|
|
mmc1: mmc@4809c000 {
|
|
compatible = "ti,omap3-hsmmc";
|
|
reg = <0x4809c000 0x200>;
|
|
interrupts = <83>;
|
|
ti,hwmods = "mmc1";
|
|
ti,dual-volt;
|
|
dmas = <&sdma 61>, <&sdma 62>;
|
|
dma-names = "tx", "rx";
|
|
pbias-supply = <&pbias_mmc_reg>;
|
|
};
|
|
|
|
mmc2: mmc@480b4000 {
|
|
compatible = "ti,omap3-hsmmc";
|
|
reg = <0x480b4000 0x200>;
|
|
interrupts = <86>;
|
|
ti,hwmods = "mmc2";
|
|
dmas = <&sdma 47>, <&sdma 48>;
|
|
dma-names = "tx", "rx";
|
|
};
|
|
|
|
mmc3: mmc@480ad000 {
|
|
compatible = "ti,omap3-hsmmc";
|
|
reg = <0x480ad000 0x200>;
|
|
interrupts = <94>;
|
|
ti,hwmods = "mmc3";
|
|
dmas = <&sdma 77>, <&sdma 78>;
|
|
dma-names = "tx", "rx";
|
|
};
|
|
|
|
mmu_isp: mmu@480bd400 {
|
|
#iommu-cells = <0>;
|
|
compatible = "ti,omap2-iommu";
|
|
reg = <0x480bd400 0x80>;
|
|
interrupts = <24>;
|
|
ti,hwmods = "mmu_isp";
|
|
ti,#tlb-entries = <8>;
|
|
};
|
|
|
|
mmu_iva: mmu@5d000000 {
|
|
#iommu-cells = <0>;
|
|
compatible = "ti,omap2-iommu";
|
|
reg = <0x5d000000 0x80>;
|
|
interrupts = <28>;
|
|
ti,hwmods = "mmu_iva";
|
|
status = "disabled";
|
|
};
|
|
|
|
wdt2: wdt@48314000 {
|
|
compatible = "ti,omap3-wdt";
|
|
reg = <0x48314000 0x80>;
|
|
ti,hwmods = "wd_timer2";
|
|
};
|
|
|
|
mcbsp1: mcbsp@48074000 {
|
|
compatible = "ti,omap3-mcbsp";
|
|
reg = <0x48074000 0xff>;
|
|
reg-names = "mpu";
|
|
interrupts = <16>, /* OCP compliant interrupt */
|
|
<59>, /* TX interrupt */
|
|
<60>; /* RX interrupt */
|
|
interrupt-names = "common", "tx", "rx";
|
|
ti,buffer-size = <128>;
|
|
ti,hwmods = "mcbsp1";
|
|
dmas = <&sdma 31>,
|
|
<&sdma 32>;
|
|
dma-names = "tx", "rx";
|
|
clocks = <&mcbsp1_fck>;
|
|
clock-names = "fck";
|
|
status = "disabled";
|
|
};
|
|
|
|
mcbsp2: mcbsp@49022000 {
|
|
compatible = "ti,omap3-mcbsp";
|
|
reg = <0x49022000 0xff>,
|
|
<0x49028000 0xff>;
|
|
reg-names = "mpu", "sidetone";
|
|
interrupts = <17>, /* OCP compliant interrupt */
|
|
<62>, /* TX interrupt */
|
|
<63>, /* RX interrupt */
|
|
<4>; /* Sidetone */
|
|
interrupt-names = "common", "tx", "rx", "sidetone";
|
|
ti,buffer-size = <1280>;
|
|
ti,hwmods = "mcbsp2", "mcbsp2_sidetone";
|
|
dmas = <&sdma 33>,
|
|
<&sdma 34>;
|
|
dma-names = "tx", "rx";
|
|
clocks = <&mcbsp2_fck>, <&mcbsp2_ick>;
|
|
clock-names = "fck", "ick";
|
|
status = "disabled";
|
|
};
|
|
|
|
mcbsp3: mcbsp@49024000 {
|
|
compatible = "ti,omap3-mcbsp";
|
|
reg = <0x49024000 0xff>,
|
|
<0x4902a000 0xff>;
|
|
reg-names = "mpu", "sidetone";
|
|
interrupts = <22>, /* OCP compliant interrupt */
|
|
<89>, /* TX interrupt */
|
|
<90>, /* RX interrupt */
|
|
<5>; /* Sidetone */
|
|
interrupt-names = "common", "tx", "rx", "sidetone";
|
|
ti,buffer-size = <128>;
|
|
ti,hwmods = "mcbsp3", "mcbsp3_sidetone";
|
|
dmas = <&sdma 17>,
|
|
<&sdma 18>;
|
|
dma-names = "tx", "rx";
|
|
clocks = <&mcbsp3_fck>, <&mcbsp3_ick>;
|
|
clock-names = "fck", "ick";
|
|
status = "disabled";
|
|
};
|
|
|
|
mcbsp4: mcbsp@49026000 {
|
|
compatible = "ti,omap3-mcbsp";
|
|
reg = <0x49026000 0xff>;
|
|
reg-names = "mpu";
|
|
interrupts = <23>, /* OCP compliant interrupt */
|
|
<54>, /* TX interrupt */
|
|
<55>; /* RX interrupt */
|
|
interrupt-names = "common", "tx", "rx";
|
|
ti,buffer-size = <128>;
|
|
ti,hwmods = "mcbsp4";
|
|
dmas = <&sdma 19>,
|
|
<&sdma 20>;
|
|
dma-names = "tx", "rx";
|
|
clocks = <&mcbsp4_fck>;
|
|
clock-names = "fck";
|
|
#sound-dai-cells = <0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
mcbsp5: mcbsp@48096000 {
|
|
compatible = "ti,omap3-mcbsp";
|
|
reg = <0x48096000 0xff>;
|
|
reg-names = "mpu";
|
|
interrupts = <27>, /* OCP compliant interrupt */
|
|
<81>, /* TX interrupt */
|
|
<82>; /* RX interrupt */
|
|
interrupt-names = "common", "tx", "rx";
|
|
ti,buffer-size = <128>;
|
|
ti,hwmods = "mcbsp5";
|
|
dmas = <&sdma 21>,
|
|
<&sdma 22>;
|
|
dma-names = "tx", "rx";
|
|
clocks = <&mcbsp5_fck>;
|
|
clock-names = "fck";
|
|
status = "disabled";
|
|
};
|
|
|
|
sham: sham@480c3000 {
|
|
compatible = "ti,omap3-sham";
|
|
ti,hwmods = "sham";
|
|
reg = <0x480c3000 0x64>;
|
|
interrupts = <49>;
|
|
dmas = <&sdma 69>;
|
|
dma-names = "rx";
|
|
};
|
|
|
|
timer1: timer@48318000 {
|
|
compatible = "ti,omap3430-timer";
|
|
reg = <0x48318000 0x400>;
|
|
interrupts = <37>;
|
|
ti,hwmods = "timer1";
|
|
ti,timer-alwon;
|
|
};
|
|
|
|
timer2: timer@49032000 {
|
|
compatible = "ti,omap3430-timer";
|
|
reg = <0x49032000 0x400>;
|
|
interrupts = <38>;
|
|
ti,hwmods = "timer2";
|
|
};
|
|
|
|
timer3: timer@49034000 {
|
|
compatible = "ti,omap3430-timer";
|
|
reg = <0x49034000 0x400>;
|
|
interrupts = <39>;
|
|
ti,hwmods = "timer3";
|
|
};
|
|
|
|
timer4: timer@49036000 {
|
|
compatible = "ti,omap3430-timer";
|
|
reg = <0x49036000 0x400>;
|
|
interrupts = <40>;
|
|
ti,hwmods = "timer4";
|
|
};
|
|
|
|
timer5: timer@49038000 {
|
|
compatible = "ti,omap3430-timer";
|
|
reg = <0x49038000 0x400>;
|
|
interrupts = <41>;
|
|
ti,hwmods = "timer5";
|
|
ti,timer-dsp;
|
|
};
|
|
|
|
timer6: timer@4903a000 {
|
|
compatible = "ti,omap3430-timer";
|
|
reg = <0x4903a000 0x400>;
|
|
interrupts = <42>;
|
|
ti,hwmods = "timer6";
|
|
ti,timer-dsp;
|
|
};
|
|
|
|
timer7: timer@4903c000 {
|
|
compatible = "ti,omap3430-timer";
|
|
reg = <0x4903c000 0x400>;
|
|
interrupts = <43>;
|
|
ti,hwmods = "timer7";
|
|
ti,timer-dsp;
|
|
};
|
|
|
|
timer8: timer@4903e000 {
|
|
compatible = "ti,omap3430-timer";
|
|
reg = <0x4903e000 0x400>;
|
|
interrupts = <44>;
|
|
ti,hwmods = "timer8";
|
|
ti,timer-pwm;
|
|
ti,timer-dsp;
|
|
};
|
|
|
|
timer9: timer@49040000 {
|
|
compatible = "ti,omap3430-timer";
|
|
reg = <0x49040000 0x400>;
|
|
interrupts = <45>;
|
|
ti,hwmods = "timer9";
|
|
ti,timer-pwm;
|
|
};
|
|
|
|
timer10: timer@48086000 {
|
|
compatible = "ti,omap3430-timer";
|
|
reg = <0x48086000 0x400>;
|
|
interrupts = <46>;
|
|
ti,hwmods = "timer10";
|
|
ti,timer-pwm;
|
|
};
|
|
|
|
timer11: timer@48088000 {
|
|
compatible = "ti,omap3430-timer";
|
|
reg = <0x48088000 0x400>;
|
|
interrupts = <47>;
|
|
ti,hwmods = "timer11";
|
|
ti,timer-pwm;
|
|
};
|
|
|
|
timer12: timer@48304000 {
|
|
compatible = "ti,omap3430-timer";
|
|
reg = <0x48304000 0x400>;
|
|
interrupts = <95>;
|
|
ti,hwmods = "timer12";
|
|
ti,timer-alwon;
|
|
ti,timer-secure;
|
|
};
|
|
|
|
usbhstll: usbhstll@48062000 {
|
|
compatible = "ti,usbhs-tll";
|
|
reg = <0x48062000 0x1000>;
|
|
interrupts = <78>;
|
|
ti,hwmods = "usb_tll_hs";
|
|
};
|
|
|
|
usbhshost: usbhshost@48064000 {
|
|
compatible = "ti,usbhs-host";
|
|
reg = <0x48064000 0x400>;
|
|
ti,hwmods = "usb_host_hs";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
usbhsohci: ohci@48064400 {
|
|
compatible = "ti,ohci-omap3";
|
|
reg = <0x48064400 0x400>;
|
|
interrupts = <76>;
|
|
remote-wakeup-connected;
|
|
};
|
|
|
|
usbhsehci: ehci@48064800 {
|
|
compatible = "ti,ehci-omap";
|
|
reg = <0x48064800 0x400>;
|
|
interrupts = <77>;
|
|
};
|
|
};
|
|
|
|
gpmc: gpmc@6e000000 {
|
|
compatible = "ti,omap3430-gpmc";
|
|
ti,hwmods = "gpmc";
|
|
reg = <0x6e000000 0x02d0>;
|
|
interrupts = <20>;
|
|
dmas = <&sdma 4>;
|
|
dma-names = "rxtx";
|
|
gpmc,num-cs = <8>;
|
|
gpmc,num-waitpins = <4>;
|
|
#address-cells = <2>;
|
|
#size-cells = <1>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
};
|
|
|
|
usb_otg_hs: usb_otg_hs@480ab000 {
|
|
compatible = "ti,omap3-musb";
|
|
reg = <0x480ab000 0x1000>;
|
|
interrupts = <92>, <93>;
|
|
interrupt-names = "mc", "dma";
|
|
ti,hwmods = "usb_otg_hs";
|
|
multipoint = <1>;
|
|
num-eps = <16>;
|
|
ram-bits = <12>;
|
|
};
|
|
|
|
dss: dss@48050000 {
|
|
compatible = "ti,omap3-dss";
|
|
reg = <0x48050000 0x200>;
|
|
status = "disabled";
|
|
ti,hwmods = "dss_core";
|
|
clocks = <&dss1_alwon_fck>;
|
|
clock-names = "fck";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
dispc@48050400 {
|
|
compatible = "ti,omap3-dispc";
|
|
reg = <0x48050400 0x400>;
|
|
interrupts = <25>;
|
|
ti,hwmods = "dss_dispc";
|
|
clocks = <&dss1_alwon_fck>;
|
|
clock-names = "fck";
|
|
};
|
|
|
|
dsi: encoder@4804fc00 {
|
|
compatible = "ti,omap3-dsi";
|
|
reg = <0x4804fc00 0x200>,
|
|
<0x4804fe00 0x40>,
|
|
<0x4804ff00 0x20>;
|
|
reg-names = "proto", "phy", "pll";
|
|
interrupts = <25>;
|
|
status = "disabled";
|
|
ti,hwmods = "dss_dsi1";
|
|
clocks = <&dss1_alwon_fck>, <&dss2_alwon_fck>;
|
|
clock-names = "fck", "sys_clk";
|
|
};
|
|
|
|
rfbi: encoder@48050800 {
|
|
compatible = "ti,omap3-rfbi";
|
|
reg = <0x48050800 0x100>;
|
|
status = "disabled";
|
|
ti,hwmods = "dss_rfbi";
|
|
clocks = <&dss1_alwon_fck>, <&dss_ick>;
|
|
clock-names = "fck", "ick";
|
|
};
|
|
|
|
venc: encoder@48050c00 {
|
|
compatible = "ti,omap3-venc";
|
|
reg = <0x48050c00 0x100>;
|
|
status = "disabled";
|
|
ti,hwmods = "dss_venc";
|
|
clocks = <&dss_tv_fck>;
|
|
clock-names = "fck";
|
|
};
|
|
};
|
|
|
|
ssi: ssi-controller@48058000 {
|
|
compatible = "ti,omap3-ssi";
|
|
ti,hwmods = "ssi";
|
|
|
|
status = "disabled";
|
|
|
|
reg = <0x48058000 0x1000>,
|
|
<0x48059000 0x1000>;
|
|
reg-names = "sys",
|
|
"gdd";
|
|
|
|
interrupts = <71>;
|
|
interrupt-names = "gdd_mpu";
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
ssi_port1: ssi-port@4805a000 {
|
|
compatible = "ti,omap3-ssi-port";
|
|
|
|
reg = <0x4805a000 0x800>,
|
|
<0x4805a800 0x800>;
|
|
reg-names = "tx",
|
|
"rx";
|
|
|
|
interrupts = <67>,
|
|
<68>;
|
|
};
|
|
|
|
ssi_port2: ssi-port@4805b000 {
|
|
compatible = "ti,omap3-ssi-port";
|
|
|
|
reg = <0x4805b000 0x800>,
|
|
<0x4805b800 0x800>;
|
|
reg-names = "tx",
|
|
"rx";
|
|
|
|
interrupts = <69>,
|
|
<70>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
/include/ "omap3xxx-clocks.dtsi"
|