mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-29 22:14:41 +08:00
241f76b24b
Adopt the SPDX license identifier headers to ease license compliance management. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
596 lines
15 KiB
Plaintext
596 lines
15 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0+
|
|
//
|
|
// Copyright 2012 Sascha Hauer, Pengutronix
|
|
|
|
#include "imx27-pinfunc.h"
|
|
|
|
#include <dt-bindings/clock/imx27-clock.h>
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/input/input.h>
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
|
|
/ {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
/*
|
|
* The decompressor and also some bootloaders rely on a
|
|
* pre-existing /chosen node to be available to insert the
|
|
* command line and merge other ATAGS info.
|
|
* Also for U-Boot there must be a pre-existing /memory node.
|
|
*/
|
|
chosen {};
|
|
memory { device_type = "memory"; };
|
|
|
|
aliases {
|
|
ethernet0 = &fec;
|
|
gpio0 = &gpio1;
|
|
gpio1 = &gpio2;
|
|
gpio2 = &gpio3;
|
|
gpio3 = &gpio4;
|
|
gpio4 = &gpio5;
|
|
gpio5 = &gpio6;
|
|
i2c0 = &i2c1;
|
|
i2c1 = &i2c2;
|
|
serial0 = &uart1;
|
|
serial1 = &uart2;
|
|
serial2 = &uart3;
|
|
serial3 = &uart4;
|
|
serial4 = &uart5;
|
|
serial5 = &uart6;
|
|
spi0 = &cspi1;
|
|
spi1 = &cspi2;
|
|
spi2 = &cspi3;
|
|
};
|
|
|
|
aitc: aitc-interrupt-controller@e0000000 {
|
|
compatible = "fsl,imx27-aitc", "fsl,avic";
|
|
interrupt-controller;
|
|
#interrupt-cells = <1>;
|
|
reg = <0x10040000 0x1000>;
|
|
};
|
|
|
|
clocks {
|
|
clk_osc26m: osc26m {
|
|
compatible = "fsl,imx-osc26m", "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <26000000>;
|
|
};
|
|
};
|
|
|
|
cpus {
|
|
#size-cells = <0>;
|
|
#address-cells = <1>;
|
|
|
|
cpu: cpu@0 {
|
|
device_type = "cpu";
|
|
reg = <0>;
|
|
compatible = "arm,arm926ej-s";
|
|
operating-points = <
|
|
/* kHz uV */
|
|
266000 1300000
|
|
399000 1450000
|
|
>;
|
|
clock-latency = <62500>;
|
|
clocks = <&clks IMX27_CLK_CPU_DIV>;
|
|
voltage-tolerance = <5>;
|
|
};
|
|
};
|
|
|
|
soc {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "simple-bus";
|
|
interrupt-parent = <&aitc>;
|
|
ranges;
|
|
|
|
aipi@10000000 { /* AIPI1 */
|
|
compatible = "fsl,aipi-bus", "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
reg = <0x10000000 0x20000>;
|
|
ranges;
|
|
|
|
dma: dma@10001000 {
|
|
compatible = "fsl,imx27-dma";
|
|
reg = <0x10001000 0x1000>;
|
|
interrupts = <32>;
|
|
clocks = <&clks IMX27_CLK_DMA_IPG_GATE>,
|
|
<&clks IMX27_CLK_DMA_AHB_GATE>;
|
|
clock-names = "ipg", "ahb";
|
|
#dma-cells = <1>;
|
|
#dma-channels = <16>;
|
|
};
|
|
|
|
wdog: wdog@10002000 {
|
|
compatible = "fsl,imx27-wdt", "fsl,imx21-wdt";
|
|
reg = <0x10002000 0x1000>;
|
|
interrupts = <27>;
|
|
clocks = <&clks IMX27_CLK_WDOG_IPG_GATE>;
|
|
};
|
|
|
|
gpt1: timer@10003000 {
|
|
compatible = "fsl,imx27-gpt", "fsl,imx21-gpt";
|
|
reg = <0x10003000 0x1000>;
|
|
interrupts = <26>;
|
|
clocks = <&clks IMX27_CLK_GPT1_IPG_GATE>,
|
|
<&clks IMX27_CLK_PER1_GATE>;
|
|
clock-names = "ipg", "per";
|
|
};
|
|
|
|
gpt2: timer@10004000 {
|
|
compatible = "fsl,imx27-gpt", "fsl,imx21-gpt";
|
|
reg = <0x10004000 0x1000>;
|
|
interrupts = <25>;
|
|
clocks = <&clks IMX27_CLK_GPT2_IPG_GATE>,
|
|
<&clks IMX27_CLK_PER1_GATE>;
|
|
clock-names = "ipg", "per";
|
|
};
|
|
|
|
gpt3: timer@10005000 {
|
|
compatible = "fsl,imx27-gpt", "fsl,imx21-gpt";
|
|
reg = <0x10005000 0x1000>;
|
|
interrupts = <24>;
|
|
clocks = <&clks IMX27_CLK_GPT3_IPG_GATE>,
|
|
<&clks IMX27_CLK_PER1_GATE>;
|
|
clock-names = "ipg", "per";
|
|
};
|
|
|
|
pwm: pwm@10006000 {
|
|
#pwm-cells = <2>;
|
|
compatible = "fsl,imx27-pwm";
|
|
reg = <0x10006000 0x1000>;
|
|
interrupts = <23>;
|
|
clocks = <&clks IMX27_CLK_PWM_IPG_GATE>,
|
|
<&clks IMX27_CLK_PER1_GATE>;
|
|
clock-names = "ipg", "per";
|
|
};
|
|
|
|
rtc: rtc@10007000 {
|
|
compatible = "fsl,imx21-rtc";
|
|
reg = <0x10007000 0x1000>;
|
|
interrupts = <22>;
|
|
clocks = <&clks IMX27_CLK_CKIL>,
|
|
<&clks IMX27_CLK_RTC_IPG_GATE>;
|
|
clock-names = "ref", "ipg";
|
|
};
|
|
|
|
kpp: kpp@10008000 {
|
|
compatible = "fsl,imx27-kpp", "fsl,imx21-kpp";
|
|
reg = <0x10008000 0x1000>;
|
|
interrupts = <21>;
|
|
clocks = <&clks IMX27_CLK_KPP_IPG_GATE>;
|
|
status = "disabled";
|
|
};
|
|
|
|
owire: owire@10009000 {
|
|
compatible = "fsl,imx27-owire", "fsl,imx21-owire";
|
|
reg = <0x10009000 0x1000>;
|
|
clocks = <&clks IMX27_CLK_OWIRE_IPG_GATE>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart1: serial@1000a000 {
|
|
compatible = "fsl,imx27-uart", "fsl,imx21-uart";
|
|
reg = <0x1000a000 0x1000>;
|
|
interrupts = <20>;
|
|
clocks = <&clks IMX27_CLK_UART1_IPG_GATE>,
|
|
<&clks IMX27_CLK_PER1_GATE>;
|
|
clock-names = "ipg", "per";
|
|
status = "disabled";
|
|
};
|
|
|
|
uart2: serial@1000b000 {
|
|
compatible = "fsl,imx27-uart", "fsl,imx21-uart";
|
|
reg = <0x1000b000 0x1000>;
|
|
interrupts = <19>;
|
|
clocks = <&clks IMX27_CLK_UART2_IPG_GATE>,
|
|
<&clks IMX27_CLK_PER1_GATE>;
|
|
clock-names = "ipg", "per";
|
|
status = "disabled";
|
|
};
|
|
|
|
uart3: serial@1000c000 {
|
|
compatible = "fsl,imx27-uart", "fsl,imx21-uart";
|
|
reg = <0x1000c000 0x1000>;
|
|
interrupts = <18>;
|
|
clocks = <&clks IMX27_CLK_UART3_IPG_GATE>,
|
|
<&clks IMX27_CLK_PER1_GATE>;
|
|
clock-names = "ipg", "per";
|
|
status = "disabled";
|
|
};
|
|
|
|
uart4: serial@1000d000 {
|
|
compatible = "fsl,imx27-uart", "fsl,imx21-uart";
|
|
reg = <0x1000d000 0x1000>;
|
|
interrupts = <17>;
|
|
clocks = <&clks IMX27_CLK_UART4_IPG_GATE>,
|
|
<&clks IMX27_CLK_PER1_GATE>;
|
|
clock-names = "ipg", "per";
|
|
status = "disabled";
|
|
};
|
|
|
|
cspi1: cspi@1000e000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "fsl,imx27-cspi";
|
|
reg = <0x1000e000 0x1000>;
|
|
interrupts = <16>;
|
|
clocks = <&clks IMX27_CLK_CSPI1_IPG_GATE>,
|
|
<&clks IMX27_CLK_PER2_GATE>;
|
|
clock-names = "ipg", "per";
|
|
status = "disabled";
|
|
};
|
|
|
|
cspi2: cspi@1000f000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "fsl,imx27-cspi";
|
|
reg = <0x1000f000 0x1000>;
|
|
interrupts = <15>;
|
|
clocks = <&clks IMX27_CLK_CSPI2_IPG_GATE>,
|
|
<&clks IMX27_CLK_PER2_GATE>;
|
|
clock-names = "ipg", "per";
|
|
status = "disabled";
|
|
};
|
|
|
|
ssi1: ssi@10010000 {
|
|
#sound-dai-cells = <0>;
|
|
compatible = "fsl,imx27-ssi", "fsl,imx21-ssi";
|
|
reg = <0x10010000 0x1000>;
|
|
interrupts = <14>;
|
|
clocks = <&clks IMX27_CLK_SSI1_IPG_GATE>;
|
|
dmas = <&dma 12>, <&dma 13>, <&dma 14>, <&dma 15>;
|
|
dma-names = "rx0", "tx0", "rx1", "tx1";
|
|
fsl,fifo-depth = <8>;
|
|
status = "disabled";
|
|
};
|
|
|
|
ssi2: ssi@10011000 {
|
|
#sound-dai-cells = <0>;
|
|
compatible = "fsl,imx27-ssi", "fsl,imx21-ssi";
|
|
reg = <0x10011000 0x1000>;
|
|
interrupts = <13>;
|
|
clocks = <&clks IMX27_CLK_SSI2_IPG_GATE>;
|
|
dmas = <&dma 8>, <&dma 9>, <&dma 10>, <&dma 11>;
|
|
dma-names = "rx0", "tx0", "rx1", "tx1";
|
|
fsl,fifo-depth = <8>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c1: i2c@10012000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "fsl,imx27-i2c", "fsl,imx21-i2c";
|
|
reg = <0x10012000 0x1000>;
|
|
interrupts = <12>;
|
|
clocks = <&clks IMX27_CLK_I2C1_IPG_GATE>;
|
|
status = "disabled";
|
|
};
|
|
|
|
sdhci1: sdhci@10013000 {
|
|
compatible = "fsl,imx27-mmc", "fsl,imx21-mmc";
|
|
reg = <0x10013000 0x1000>;
|
|
interrupts = <11>;
|
|
clocks = <&clks IMX27_CLK_SDHC1_IPG_GATE>,
|
|
<&clks IMX27_CLK_PER2_GATE>;
|
|
clock-names = "ipg", "per";
|
|
dmas = <&dma 7>;
|
|
dma-names = "rx-tx";
|
|
status = "disabled";
|
|
};
|
|
|
|
sdhci2: sdhci@10014000 {
|
|
compatible = "fsl,imx27-mmc", "fsl,imx21-mmc";
|
|
reg = <0x10014000 0x1000>;
|
|
interrupts = <10>;
|
|
clocks = <&clks IMX27_CLK_SDHC2_IPG_GATE>,
|
|
<&clks IMX27_CLK_PER2_GATE>;
|
|
clock-names = "ipg", "per";
|
|
dmas = <&dma 6>;
|
|
dma-names = "rx-tx";
|
|
status = "disabled";
|
|
};
|
|
|
|
iomuxc: iomuxc@10015000 {
|
|
compatible = "fsl,imx27-iomuxc";
|
|
reg = <0x10015000 0x600>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
gpio1: gpio@10015000 {
|
|
compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
|
|
reg = <0x10015000 0x100>;
|
|
clocks = <&clks IMX27_CLK_GPIO_IPG_GATE>;
|
|
interrupts = <8>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
gpio2: gpio@10015100 {
|
|
compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
|
|
reg = <0x10015100 0x100>;
|
|
clocks = <&clks IMX27_CLK_GPIO_IPG_GATE>;
|
|
interrupts = <8>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
gpio3: gpio@10015200 {
|
|
compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
|
|
reg = <0x10015200 0x100>;
|
|
clocks = <&clks IMX27_CLK_GPIO_IPG_GATE>;
|
|
interrupts = <8>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
gpio4: gpio@10015300 {
|
|
compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
|
|
reg = <0x10015300 0x100>;
|
|
clocks = <&clks IMX27_CLK_GPIO_IPG_GATE>;
|
|
interrupts = <8>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
gpio5: gpio@10015400 {
|
|
compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
|
|
reg = <0x10015400 0x100>;
|
|
clocks = <&clks IMX27_CLK_GPIO_IPG_GATE>;
|
|
interrupts = <8>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
gpio6: gpio@10015500 {
|
|
compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
|
|
reg = <0x10015500 0x100>;
|
|
clocks = <&clks IMX27_CLK_GPIO_IPG_GATE>;
|
|
interrupts = <8>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
};
|
|
|
|
audmux: audmux@10016000 {
|
|
compatible = "fsl,imx27-audmux", "fsl,imx21-audmux";
|
|
reg = <0x10016000 0x1000>;
|
|
clocks = <&clks IMX27_CLK_DUMMY>;
|
|
clock-names = "audmux";
|
|
status = "disabled";
|
|
};
|
|
|
|
cspi3: cspi@10017000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "fsl,imx27-cspi";
|
|
reg = <0x10017000 0x1000>;
|
|
interrupts = <6>;
|
|
clocks = <&clks IMX27_CLK_CSPI3_IPG_GATE>,
|
|
<&clks IMX27_CLK_PER2_GATE>;
|
|
clock-names = "ipg", "per";
|
|
status = "disabled";
|
|
};
|
|
|
|
gpt4: timer@10019000 {
|
|
compatible = "fsl,imx27-gpt", "fsl,imx21-gpt";
|
|
reg = <0x10019000 0x1000>;
|
|
interrupts = <4>;
|
|
clocks = <&clks IMX27_CLK_GPT4_IPG_GATE>,
|
|
<&clks IMX27_CLK_PER1_GATE>;
|
|
clock-names = "ipg", "per";
|
|
};
|
|
|
|
gpt5: timer@1001a000 {
|
|
compatible = "fsl,imx27-gpt", "fsl,imx21-gpt";
|
|
reg = <0x1001a000 0x1000>;
|
|
interrupts = <3>;
|
|
clocks = <&clks IMX27_CLK_GPT5_IPG_GATE>,
|
|
<&clks IMX27_CLK_PER1_GATE>;
|
|
clock-names = "ipg", "per";
|
|
};
|
|
|
|
uart5: serial@1001b000 {
|
|
compatible = "fsl,imx27-uart", "fsl,imx21-uart";
|
|
reg = <0x1001b000 0x1000>;
|
|
interrupts = <49>;
|
|
clocks = <&clks IMX27_CLK_UART5_IPG_GATE>,
|
|
<&clks IMX27_CLK_PER1_GATE>;
|
|
clock-names = "ipg", "per";
|
|
status = "disabled";
|
|
};
|
|
|
|
uart6: serial@1001c000 {
|
|
compatible = "fsl,imx27-uart", "fsl,imx21-uart";
|
|
reg = <0x1001c000 0x1000>;
|
|
interrupts = <48>;
|
|
clocks = <&clks IMX27_CLK_UART6_IPG_GATE>,
|
|
<&clks IMX27_CLK_PER1_GATE>;
|
|
clock-names = "ipg", "per";
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c2: i2c@1001d000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "fsl,imx27-i2c", "fsl,imx21-i2c";
|
|
reg = <0x1001d000 0x1000>;
|
|
interrupts = <1>;
|
|
clocks = <&clks IMX27_CLK_I2C2_IPG_GATE>;
|
|
status = "disabled";
|
|
};
|
|
|
|
sdhci3: sdhci@1001e000 {
|
|
compatible = "fsl,imx27-mmc", "fsl,imx21-mmc";
|
|
reg = <0x1001e000 0x1000>;
|
|
interrupts = <9>;
|
|
clocks = <&clks IMX27_CLK_SDHC3_IPG_GATE>,
|
|
<&clks IMX27_CLK_PER2_GATE>;
|
|
clock-names = "ipg", "per";
|
|
dmas = <&dma 36>;
|
|
dma-names = "rx-tx";
|
|
status = "disabled";
|
|
};
|
|
|
|
gpt6: timer@1001f000 {
|
|
compatible = "fsl,imx27-gpt", "fsl,imx21-gpt";
|
|
reg = <0x1001f000 0x1000>;
|
|
interrupts = <2>;
|
|
clocks = <&clks IMX27_CLK_GPT6_IPG_GATE>,
|
|
<&clks IMX27_CLK_PER1_GATE>;
|
|
clock-names = "ipg", "per";
|
|
};
|
|
};
|
|
|
|
aipi@10020000 { /* AIPI2 */
|
|
compatible = "fsl,aipi-bus", "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
reg = <0x10020000 0x20000>;
|
|
ranges;
|
|
|
|
fb: fb@10021000 {
|
|
compatible = "fsl,imx27-fb", "fsl,imx21-fb";
|
|
interrupts = <61>;
|
|
reg = <0x10021000 0x1000>;
|
|
clocks = <&clks IMX27_CLK_LCDC_IPG_GATE>,
|
|
<&clks IMX27_CLK_LCDC_AHB_GATE>,
|
|
<&clks IMX27_CLK_PER3_GATE>;
|
|
clock-names = "ipg", "ahb", "per";
|
|
status = "disabled";
|
|
};
|
|
|
|
coda: coda@10023000 {
|
|
compatible = "fsl,imx27-vpu", "cnm,codadx6";
|
|
reg = <0x10023000 0x0200>;
|
|
interrupts = <53>;
|
|
clocks = <&clks IMX27_CLK_VPU_BAUD_GATE>,
|
|
<&clks IMX27_CLK_VPU_AHB_GATE>;
|
|
clock-names = "per", "ahb";
|
|
iram = <&iram>;
|
|
};
|
|
|
|
usbotg: usb@10024000 {
|
|
compatible = "fsl,imx27-usb";
|
|
reg = <0x10024000 0x200>;
|
|
interrupts = <56>;
|
|
clocks = <&clks IMX27_CLK_USB_IPG_GATE>,
|
|
<&clks IMX27_CLK_USB_AHB_GATE>,
|
|
<&clks IMX27_CLK_USB_DIV>;
|
|
clock-names = "ipg", "ahb", "per";
|
|
fsl,usbmisc = <&usbmisc 0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
usbh1: usb@10024200 {
|
|
compatible = "fsl,imx27-usb";
|
|
reg = <0x10024200 0x200>;
|
|
interrupts = <54>;
|
|
clocks = <&clks IMX27_CLK_USB_IPG_GATE>,
|
|
<&clks IMX27_CLK_USB_AHB_GATE>,
|
|
<&clks IMX27_CLK_USB_DIV>;
|
|
clock-names = "ipg", "ahb", "per";
|
|
fsl,usbmisc = <&usbmisc 1>;
|
|
dr_mode = "host";
|
|
status = "disabled";
|
|
};
|
|
|
|
usbh2: usb@10024400 {
|
|
compatible = "fsl,imx27-usb";
|
|
reg = <0x10024400 0x200>;
|
|
interrupts = <55>;
|
|
clocks = <&clks IMX27_CLK_USB_IPG_GATE>,
|
|
<&clks IMX27_CLK_USB_AHB_GATE>,
|
|
<&clks IMX27_CLK_USB_DIV>;
|
|
clock-names = "ipg", "ahb", "per";
|
|
fsl,usbmisc = <&usbmisc 2>;
|
|
dr_mode = "host";
|
|
status = "disabled";
|
|
};
|
|
|
|
usbmisc: usbmisc@10024600 {
|
|
#index-cells = <1>;
|
|
compatible = "fsl,imx27-usbmisc";
|
|
reg = <0x10024600 0x200>;
|
|
};
|
|
|
|
sahara2: sahara@10025000 {
|
|
compatible = "fsl,imx27-sahara";
|
|
reg = <0x10025000 0x1000>;
|
|
interrupts = <59>;
|
|
clocks = <&clks IMX27_CLK_SAHARA_IPG_GATE>,
|
|
<&clks IMX27_CLK_SAHARA_AHB_GATE>;
|
|
clock-names = "ipg", "ahb";
|
|
};
|
|
|
|
clks: ccm@10027000{
|
|
compatible = "fsl,imx27-ccm";
|
|
reg = <0x10027000 0x1000>;
|
|
#clock-cells = <1>;
|
|
};
|
|
|
|
iim: iim@10028000 {
|
|
compatible = "fsl,imx27-iim";
|
|
reg = <0x10028000 0x1000>;
|
|
interrupts = <62>;
|
|
clocks = <&clks IMX27_CLK_IIM_IPG_GATE>;
|
|
};
|
|
|
|
fec: ethernet@1002b000 {
|
|
compatible = "fsl,imx27-fec";
|
|
reg = <0x1002b000 0x1000>;
|
|
interrupts = <50>;
|
|
clocks = <&clks IMX27_CLK_FEC_IPG_GATE>,
|
|
<&clks IMX27_CLK_FEC_AHB_GATE>;
|
|
clock-names = "ipg", "ahb";
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
nfc: nand@d8000000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "fsl,imx27-nand";
|
|
reg = <0xd8000000 0x1000>;
|
|
interrupts = <29>;
|
|
clocks = <&clks IMX27_CLK_NFC_BAUD_GATE>;
|
|
status = "disabled";
|
|
};
|
|
|
|
weim: weim@d8002000 {
|
|
#address-cells = <2>;
|
|
#size-cells = <1>;
|
|
compatible = "fsl,imx27-weim";
|
|
reg = <0xd8002000 0x1000>;
|
|
clocks = <&clks IMX27_CLK_EMI_AHB_GATE>;
|
|
ranges = <
|
|
0 0 0xc0000000 0x08000000
|
|
1 0 0xc8000000 0x08000000
|
|
2 0 0xd0000000 0x02000000
|
|
3 0 0xd2000000 0x02000000
|
|
4 0 0xd4000000 0x02000000
|
|
5 0 0xd6000000 0x02000000
|
|
>;
|
|
status = "disabled";
|
|
};
|
|
|
|
iram: iram@ffff4c00 {
|
|
compatible = "mmio-sram";
|
|
reg = <0xffff4c00 0xb400>;
|
|
};
|
|
};
|
|
};
|