mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-29 22:14:41 +08:00
a78936fc8c
The board has USB VBUS detection available over GPIO. Plug it to extcon node of USB1 and USB2 ports. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
276 lines
6.4 KiB
Plaintext
276 lines
6.4 KiB
Plaintext
/*
|
|
* Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include "dra72-evm-common.dtsi"
|
|
#include "dra7-mmc-iodelay.dtsi"
|
|
#include "dra72x-mmc-iodelay.dtsi"
|
|
#include <dt-bindings/net/ti-dp83867.h>
|
|
|
|
/ {
|
|
compatible = "ti,dra718-evm", "ti,dra718", "ti,dra722", "ti,dra72", "ti,dra7";
|
|
model = "TI DRA718 EVM";
|
|
|
|
memory {
|
|
device_type = "memory";
|
|
reg = <0x0 0x80000000 0x0 0x80000000>; /* 2GB */
|
|
};
|
|
|
|
vpo_sd_1v8_3v3: gpio-regulator-TPS74801 {
|
|
compatible = "regulator-gpio";
|
|
|
|
regulator-name = "vddshv8";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-boot-on;
|
|
vin-supply = <&evm_5v0>;
|
|
|
|
gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>;
|
|
states = <1800000 0x0
|
|
3300000 0x1>;
|
|
};
|
|
|
|
evm_1v8_sw: fixedregulator-evm_1v8 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "evm_1v8";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
vin-supply = <&lp8732_buck0_reg>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
poweroff: gpio-poweroff {
|
|
compatible = "gpio-poweroff";
|
|
gpios = <&gpio7 30 GPIO_ACTIVE_HIGH>;
|
|
input;
|
|
};
|
|
};
|
|
|
|
&i2c1 {
|
|
status = "okay";
|
|
clock-frequency = <400000>;
|
|
|
|
lp8733: lp8733@60 {
|
|
compatible = "ti,lp8733";
|
|
reg = <0x60>;
|
|
|
|
buck0-in-supply =<&vsys_3v3>;
|
|
buck1-in-supply =<&vsys_3v3>;
|
|
ldo0-in-supply =<&evm_5v0>;
|
|
ldo1-in-supply =<&evm_5v0>;
|
|
|
|
lp8733_regulators: regulators {
|
|
lp8733_buck0_reg: buck0 {
|
|
/* FB_B0 -> LP8733-BUCK1 - VPO_S1_AVS - VDD_CORE_AVS (core, mpu, gpu) */
|
|
regulator-name = "lp8733-buck0";
|
|
regulator-min-microvolt = <850000>;
|
|
regulator-max-microvolt = <1250000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
lp8733_buck1_reg: buck1 {
|
|
/* FB_B1 -> LP8733-BUCK2 - VPO_S2_AVS - VDD_DSP_AVS (DSP/eve/iva) */
|
|
regulator-name = "lp8733-buck1";
|
|
regulator-min-microvolt = <850000>;
|
|
regulator-max-microvolt = <1250000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
lp8733_ldo0_reg: ldo0 {
|
|
/* LDO0 -> LP8733-LDO1 - VPO_L1_3V3 - VDDSHV8 (optional) */
|
|
regulator-name = "lp8733-ldo0";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
};
|
|
|
|
lp8733_ldo1_reg: ldo1 {
|
|
/* LDO1 -> LP8733-LDO2 - VPO_L2_3V3 - VDDA_USB3V3 */
|
|
regulator-name = "lp8733-ldo1";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
};
|
|
};
|
|
|
|
lp8732: lp8732@61 {
|
|
compatible = "ti,lp8732";
|
|
reg = <0x61>;
|
|
|
|
buck0-in-supply =<&vsys_3v3>;
|
|
buck1-in-supply =<&vsys_3v3>;
|
|
ldo0-in-supply =<&vsys_3v3>;
|
|
ldo1-in-supply =<&vsys_3v3>;
|
|
|
|
lp8732_regulators: regulators {
|
|
lp8732_buck0_reg: buck0 {
|
|
/* FB_B0 -> LP8732-BUCK1 - VPO_S3_1V8 - VDDS_1V8 */
|
|
regulator-name = "lp8732-buck0";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
lp8732_buck1_reg: buck1 {
|
|
/* FB_B1 -> LP8732-BUCK2 - VPO_S4_DDR - VDD_DDR_1V35 */
|
|
regulator-name = "lp8732-buck1";
|
|
regulator-min-microvolt = <1350000>;
|
|
regulator-max-microvolt = <1350000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
lp8732_ldo0_reg: ldo0 {
|
|
/* LDO0 -> LP8732-LDO1 - VPO_L3_1V8 - VDA_1V8_PLL */
|
|
regulator-name = "lp8732-ldo0";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
lp8732_ldo1_reg: ldo1 {
|
|
/* LDO1 -> LP8732-LDO2 - VPO_L4_1V8 - VDA_1V8_PHY */
|
|
regulator-name = "lp8732-ldo1";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&pcf_lcd {
|
|
interrupt-parent = <&gpio7>;
|
|
interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
|
|
};
|
|
|
|
&pcf_gpio_21 {
|
|
interrupt-parent = <&gpio7>;
|
|
interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
|
|
};
|
|
|
|
&pcf_hdmi {
|
|
p0 {
|
|
/*
|
|
* PM_OEn to High: Disable routing I2C3 to PM_I2C
|
|
* With this PM_SEL(p3) should not matter
|
|
*/
|
|
gpio-hog;
|
|
gpios = <0 GPIO_ACTIVE_LOW>;
|
|
output-high;
|
|
line-name = "pm_oe_n";
|
|
};
|
|
};
|
|
|
|
&mmc1 {
|
|
pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104";
|
|
pinctrl-0 = <&mmc1_pins_default_no_clk_pu>;
|
|
pinctrl-1 = <&mmc1_pins_hs>;
|
|
pinctrl-2 = <&mmc1_pins_sdr12>;
|
|
pinctrl-3 = <&mmc1_pins_sdr25>;
|
|
pinctrl-4 = <&mmc1_pins_sdr50>;
|
|
pinctrl-5 = <&mmc1_pins_ddr50_rev20 &mmc1_iodelay_ddr50_conf>;
|
|
pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev20_conf>;
|
|
vqmmc-supply = <&vpo_sd_1v8_3v3>;
|
|
};
|
|
|
|
&mmc2 {
|
|
pinctrl-names = "default", "hs", "ddr_1_8v", "hs200_1_8v";
|
|
pinctrl-0 = <&mmc2_pins_default>;
|
|
pinctrl-1 = <&mmc2_pins_hs>;
|
|
pinctrl-2 = <&mmc2_pins_ddr_rev20 &mmc2_iodelay_ddr_conf>;
|
|
pinctrl-3 = <&mmc2_pins_hs200 &mmc2_iodelay_hs200_rev20_conf>;
|
|
vmmc-supply = <&evm_1v8_sw>;
|
|
vqmmc-supply = <&evm_1v8_sw>;
|
|
};
|
|
|
|
&mac {
|
|
mode-gpios = <&pcf_gpio_21 4 GPIO_ACTIVE_LOW>,
|
|
<&pcf_hdmi 9 GPIO_ACTIVE_LOW>, /* P11 */
|
|
<&pcf_hdmi 10 GPIO_ACTIVE_LOW>; /* P12 */
|
|
dual_emac;
|
|
};
|
|
|
|
&cpsw_emac0 {
|
|
phy_id = <&davinci_mdio>, <2>;
|
|
phy-mode = "rgmii-id";
|
|
dual_emac_res_vlan = <1>;
|
|
};
|
|
|
|
&cpsw_emac1 {
|
|
phy_id = <&davinci_mdio>, <3>;
|
|
phy-mode = "rgmii-id";
|
|
dual_emac_res_vlan = <2>;
|
|
};
|
|
|
|
&davinci_mdio {
|
|
dp83867_0: ethernet-phy@2 {
|
|
reg = <2>;
|
|
ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
|
|
ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>;
|
|
ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
|
|
ti,min-output-impedance;
|
|
ti,dp83867-rxctrl-strap-quirk;
|
|
};
|
|
|
|
dp83867_1: ethernet-phy@3 {
|
|
reg = <3>;
|
|
ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
|
|
ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>;
|
|
ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
|
|
ti,min-output-impedance;
|
|
ti,dp83867-rxctrl-strap-quirk;
|
|
};
|
|
};
|
|
|
|
/* No Sata on this device */
|
|
&sata_phy {
|
|
status = "disabled";
|
|
};
|
|
|
|
&sata {
|
|
status = "disabled";
|
|
};
|
|
|
|
/* No RTC on this device */
|
|
&rtc {
|
|
status = "disabled";
|
|
};
|
|
|
|
&usb2_phy1 {
|
|
phy-supply = <&lp8733_ldo1_reg>;
|
|
};
|
|
|
|
&usb2_phy2 {
|
|
phy-supply = <&lp8733_ldo1_reg>;
|
|
};
|
|
|
|
&dss {
|
|
/* Supplied by VDA_1V8_PLL */
|
|
vdda_video-supply = <&lp8732_ldo0_reg>;
|
|
};
|
|
|
|
&hdmi {
|
|
/* Supplied by VDA_1V8_PHY */
|
|
vdda_video-supply = <&lp8732_ldo1_reg>;
|
|
};
|
|
|
|
&extcon_usb1 {
|
|
vbus-gpio = <&pcf_lcd 14 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
&extcon_usb2 {
|
|
vbus-gpio = <&pcf_lcd 15 GPIO_ACTIVE_HIGH>;
|
|
};
|