Archit Taneja bd5a7b11a0 OMAPDSS: DSI: Fix HSYNC, VSYNC and DE polarities between DISPC and DSI ... For DSI operation in videomode, DISPC logic levels for the signals HSYNC, VSYNC and DE need to be specified to DSI via the fields VP_HSYNC_POL, VP_VSYNC_POL and VP_DE_POL in DSI_CTRL registers. This information is completely internal to DSS as logic levels for the above signals hold no meaning on the DSI bus. Hence a DSI panel driver should be totally oblivious of these fields. Fix the logic levels/polarities in the DISPC and DSI registers to a default value. This is done by overriding these fields in omap_video_timings struct filled by the panel driver for DISPC, and use the equivalent default values when programming DSI_CTRL registers. Also, remove the redundant polarity related fields in omap_dss_dsi_videomode_data. Signed-off-by: Archit Taneja <archit@ti.com>		2012-06-29 10:15:54 +03:00
..
displays	OMAPDSS: Remove omap_panel_config enum from omap_dss_device	2012-06-29 10:15:51 +03:00
dss	OMAPDSS: DSI: Fix HSYNC, VSYNC and DE polarities between DISPC and DSI	2012-06-29 10:15:54 +03:00
omapfb	OMAPFB: Map interlace field in omap_video_timings with fb vmode flags	2012-06-29 10:15:53 +03:00
Kconfig	OMAP: DSS2: Add generic and Sharp panel drivers	2009-12-09 18:19:42 +02:00
Makefile	OMAP2: avoid descending into disabled framebuffer dirs	2011-05-11 14:20:53 +03:00
vram.c	OMAPDSS: Remove video SRAM support	2012-02-23 09:38:26 +02:00
vrfb.c	OMAPDSS: VRFB: remove compiler warnings when CONFIG_BUG=n	2012-05-22 10:59:15 +03:00