Linus Walleij bd525e6c75 iio: pressure: bmp280: support supply regulators ... The BMP085/BMP180/BMP280 is supplied with two power sources: VDDA (analog power) and VDDD (digital power). As these may come from regulators (as on the APQ8060 Dragonboard) we need the driver to attempt to fetch and enable these regulators. We FAIL if we cannot: boards should either define: - Proper regulators if present - Define fixed regulators if power is hardwired to the component - Rely on dummy regulators (will be present on all DT systems and any boardfile system that calls regulator_has_full_constraints(). Cc: Mark Brown <broonie@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>		2016-07-03 11:26:24 +01:00
..
accel	iio:core: timestamping clock selection support	2016-06-30 19:41:38 +01:00
adc	iio:core: timestamping clock selection support	2016-06-30 19:41:38 +01:00
amplifiers	spi: Updates for v4.4	2015-11-05 13:15:12 -08:00
buffer	iio: buffer-dma: Use ARRAY_SIZE in for loop range	2016-06-27 21:06:40 +01:00
chemical	iio:core: timestamping clock selection support	2016-06-30 19:41:38 +01:00
common	iio: st_sensors: harden interrupt handling	2016-07-02 20:40:15 +01:00
dac	iio:core: timestamping clock selection support	2016-06-30 19:41:38 +01:00
dummy	iio:core: timestamping clock selection support	2016-06-30 19:41:38 +01:00
frequency	iio: frequency: ad9523: use unsigned int rather then bare unsigned	2016-04-17 10:31:03 +01:00
gyro	iio:core: timestamping clock selection support	2016-06-30 19:41:38 +01:00
health	First round of IIO new device support, features and cleanups for the 4.8 cycle.	2016-06-09 09:15:58 -07:00
humidity	Merge 4.7-rc4 into staging-next	2016-06-20 08:25:44 -07:00
imu	iio:core: timestamping clock selection support	2016-06-30 19:41:38 +01:00
light	drivers:iio:light:isl29125: added macros for sensing range	2016-07-03 10:19:54 +01:00
magnetometer	iio: magn: ak8975: deploy runtime and system PM	2016-06-30 20:40:16 +01:00
orientation	iio: orientation: hid-sensor-rotation: Fix memory leak in probe()	2015-05-17 09:10:25 +01:00
potentiometer	iio: max5487: Add support for Maxim digital potentiometers	2016-05-21 20:13:14 +01:00
pressure	iio: pressure: bmp280: support supply regulators	2016-07-03 11:26:24 +01:00
proximity	iio:core: timestamping clock selection support	2016-06-30 19:41:38 +01:00
temperature	iio: Export I2C module alias information	2016-05-21 20:08:14 +01:00
trigger	iio:trigger: Experimental kthread tight loop trigger (thread only)	2016-06-03 13:18:44 +01:00
iio_core_trigger.h
iio_core.h	iio:core: timestamping clock selection support	2016-06-30 19:41:38 +01:00
industrialio-buffer.c	iio: fix config watermark initial value	2016-03-28 11:00:38 +01:00
industrialio-configfs.c	iio:configfs: Introduce iio/configfs.h to provide a location for the configfs_subsystem	2015-12-05 16:25:30 +00:00
industrialio-core.c	iio:core: timestamping clock selection support	2016-06-30 19:41:38 +01:00
industrialio-event.c	iio:core: timestamping clock selection support	2016-06-30 19:41:38 +01:00
industrialio-sw-device.c	iio: Add support for creating IIO devices via configfs	2016-05-04 11:43:54 +01:00
industrialio-sw-trigger.c	iio: core: fix ptr_ret.cocci warnings	2016-01-20 17:09:18 -08:00
industrialio-trigger.c	iio:core: timestamping clock selection support	2016-06-30 19:41:38 +01:00
industrialio-triggered-event.c	iio: Support triggered events	2015-08-27 20:47:09 +01:00
inkern.c	iio: core: Add devm_ APIs for iio_channel_{get,release}_all	2016-04-19 19:58:15 +01:00
Kconfig	iio: Add support for creating IIO devices via configfs	2016-05-04 11:43:54 +01:00
Makefile	iio: Add support for creating IIO devices via configfs	2016-05-04 11:43:54 +01:00