mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-25 13:14:07 +08:00
402bcac4b2
When receiving reset interrupt, FADDR need to be reset to zero in peripheral mode. Otherwise ep0 cannot do enumeration when re-plugging USB cable. Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com> Acked-by: Min Guo <min.guo@mediatek.com> Signed-off-by: Bin Liu <b-liu@ti.com> Link: https://lore.kernel.org/r/20200525025049.3400-5-b-liu@ti.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
593 lines
14 KiB
C
593 lines
14 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Copyright (C) 2019 MediaTek Inc.
|
|
*
|
|
* Author:
|
|
* Min Guo <min.guo@mediatek.com>
|
|
* Yonglong Wu <yonglong.wu@mediatek.com>
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of_platform.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/usb/role.h>
|
|
#include <linux/usb/usb_phy_generic.h>
|
|
#include "musb_core.h"
|
|
#include "musb_dma.h"
|
|
|
|
#define USB_L1INTS 0x00a0
|
|
#define USB_L1INTM 0x00a4
|
|
#define MTK_MUSB_TXFUNCADDR 0x0480
|
|
|
|
/* MediaTek controller toggle enable and status reg */
|
|
#define MUSB_RXTOG 0x80
|
|
#define MUSB_RXTOGEN 0x82
|
|
#define MUSB_TXTOG 0x84
|
|
#define MUSB_TXTOGEN 0x86
|
|
#define MTK_TOGGLE_EN GENMASK(15, 0)
|
|
|
|
#define TX_INT_STATUS BIT(0)
|
|
#define RX_INT_STATUS BIT(1)
|
|
#define USBCOM_INT_STATUS BIT(2)
|
|
#define DMA_INT_STATUS BIT(3)
|
|
|
|
#define DMA_INTR_STATUS_MSK GENMASK(7, 0)
|
|
#define DMA_INTR_UNMASK_SET_MSK GENMASK(31, 24)
|
|
|
|
struct mtk_glue {
|
|
struct device *dev;
|
|
struct musb *musb;
|
|
struct platform_device *musb_pdev;
|
|
struct platform_device *usb_phy;
|
|
struct phy *phy;
|
|
struct usb_phy *xceiv;
|
|
enum phy_mode phy_mode;
|
|
struct clk *main;
|
|
struct clk *mcu;
|
|
struct clk *univpll;
|
|
enum usb_role role;
|
|
struct usb_role_switch *role_sw;
|
|
};
|
|
|
|
static int mtk_musb_clks_get(struct mtk_glue *glue)
|
|
{
|
|
struct device *dev = glue->dev;
|
|
|
|
glue->main = devm_clk_get(dev, "main");
|
|
if (IS_ERR(glue->main)) {
|
|
dev_err(dev, "fail to get main clock\n");
|
|
return PTR_ERR(glue->main);
|
|
}
|
|
|
|
glue->mcu = devm_clk_get(dev, "mcu");
|
|
if (IS_ERR(glue->mcu)) {
|
|
dev_err(dev, "fail to get mcu clock\n");
|
|
return PTR_ERR(glue->mcu);
|
|
}
|
|
|
|
glue->univpll = devm_clk_get(dev, "univpll");
|
|
if (IS_ERR(glue->univpll)) {
|
|
dev_err(dev, "fail to get univpll clock\n");
|
|
return PTR_ERR(glue->univpll);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mtk_musb_clks_enable(struct mtk_glue *glue)
|
|
{
|
|
int ret;
|
|
|
|
ret = clk_prepare_enable(glue->main);
|
|
if (ret) {
|
|
dev_err(glue->dev, "failed to enable main clock\n");
|
|
goto err_main_clk;
|
|
}
|
|
|
|
ret = clk_prepare_enable(glue->mcu);
|
|
if (ret) {
|
|
dev_err(glue->dev, "failed to enable mcu clock\n");
|
|
goto err_mcu_clk;
|
|
}
|
|
|
|
ret = clk_prepare_enable(glue->univpll);
|
|
if (ret) {
|
|
dev_err(glue->dev, "failed to enable univpll clock\n");
|
|
goto err_univpll_clk;
|
|
}
|
|
|
|
return 0;
|
|
|
|
err_univpll_clk:
|
|
clk_disable_unprepare(glue->mcu);
|
|
err_mcu_clk:
|
|
clk_disable_unprepare(glue->main);
|
|
err_main_clk:
|
|
return ret;
|
|
}
|
|
|
|
static void mtk_musb_clks_disable(struct mtk_glue *glue)
|
|
{
|
|
clk_disable_unprepare(glue->univpll);
|
|
clk_disable_unprepare(glue->mcu);
|
|
clk_disable_unprepare(glue->main);
|
|
}
|
|
|
|
static int mtk_otg_switch_set(struct mtk_glue *glue, enum usb_role role)
|
|
{
|
|
struct musb *musb = glue->musb;
|
|
u8 devctl = readb(musb->mregs + MUSB_DEVCTL);
|
|
enum usb_role new_role;
|
|
|
|
if (role == glue->role)
|
|
return 0;
|
|
|
|
switch (role) {
|
|
case USB_ROLE_HOST:
|
|
musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE;
|
|
glue->phy_mode = PHY_MODE_USB_HOST;
|
|
new_role = USB_ROLE_HOST;
|
|
if (glue->role == USB_ROLE_NONE)
|
|
phy_power_on(glue->phy);
|
|
|
|
devctl |= MUSB_DEVCTL_SESSION;
|
|
musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
|
|
MUSB_HST_MODE(musb);
|
|
break;
|
|
case USB_ROLE_DEVICE:
|
|
musb->xceiv->otg->state = OTG_STATE_B_IDLE;
|
|
glue->phy_mode = PHY_MODE_USB_DEVICE;
|
|
new_role = USB_ROLE_DEVICE;
|
|
devctl &= ~MUSB_DEVCTL_SESSION;
|
|
musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
|
|
if (glue->role == USB_ROLE_NONE)
|
|
phy_power_on(glue->phy);
|
|
|
|
MUSB_DEV_MODE(musb);
|
|
break;
|
|
case USB_ROLE_NONE:
|
|
glue->phy_mode = PHY_MODE_USB_OTG;
|
|
new_role = USB_ROLE_NONE;
|
|
devctl &= ~MUSB_DEVCTL_SESSION;
|
|
musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
|
|
if (glue->role != USB_ROLE_NONE)
|
|
phy_power_off(glue->phy);
|
|
|
|
break;
|
|
default:
|
|
dev_err(glue->dev, "Invalid State\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
glue->role = new_role;
|
|
phy_set_mode(glue->phy, glue->phy_mode);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int musb_usb_role_sx_set(struct usb_role_switch *sw, enum usb_role role)
|
|
{
|
|
return mtk_otg_switch_set(usb_role_switch_get_drvdata(sw), role);
|
|
}
|
|
|
|
static enum usb_role musb_usb_role_sx_get(struct usb_role_switch *sw)
|
|
{
|
|
struct mtk_glue *glue = usb_role_switch_get_drvdata(sw);
|
|
|
|
return glue->role;
|
|
}
|
|
|
|
static int mtk_otg_switch_init(struct mtk_glue *glue)
|
|
{
|
|
struct usb_role_switch_desc role_sx_desc = { 0 };
|
|
|
|
role_sx_desc.set = musb_usb_role_sx_set;
|
|
role_sx_desc.get = musb_usb_role_sx_get;
|
|
role_sx_desc.fwnode = dev_fwnode(glue->dev);
|
|
role_sx_desc.driver_data = glue;
|
|
glue->role_sw = usb_role_switch_register(glue->dev, &role_sx_desc);
|
|
|
|
return PTR_ERR_OR_ZERO(glue->role_sw);
|
|
}
|
|
|
|
static void mtk_otg_switch_exit(struct mtk_glue *glue)
|
|
{
|
|
return usb_role_switch_unregister(glue->role_sw);
|
|
}
|
|
|
|
static irqreturn_t generic_interrupt(int irq, void *__hci)
|
|
{
|
|
unsigned long flags;
|
|
irqreturn_t retval = IRQ_NONE;
|
|
struct musb *musb = __hci;
|
|
|
|
spin_lock_irqsave(&musb->lock, flags);
|
|
musb->int_usb = musb_clearb(musb->mregs, MUSB_INTRUSB);
|
|
musb->int_rx = musb_clearw(musb->mregs, MUSB_INTRRX);
|
|
musb->int_tx = musb_clearw(musb->mregs, MUSB_INTRTX);
|
|
|
|
if ((musb->int_usb & MUSB_INTR_RESET) && !is_host_active(musb)) {
|
|
/* ep0 FADDR must be 0 when (re)entering peripheral mode */
|
|
musb_ep_select(musb->mregs, 0);
|
|
musb_writeb(musb->mregs, MUSB_FADDR, 0);
|
|
}
|
|
|
|
if (musb->int_usb || musb->int_tx || musb->int_rx)
|
|
retval = musb_interrupt(musb);
|
|
|
|
spin_unlock_irqrestore(&musb->lock, flags);
|
|
|
|
return retval;
|
|
}
|
|
|
|
static irqreturn_t mtk_musb_interrupt(int irq, void *dev_id)
|
|
{
|
|
irqreturn_t retval = IRQ_NONE;
|
|
struct musb *musb = (struct musb *)dev_id;
|
|
u32 l1_ints;
|
|
|
|
l1_ints = musb_readl(musb->mregs, USB_L1INTS) &
|
|
musb_readl(musb->mregs, USB_L1INTM);
|
|
|
|
if (l1_ints & (TX_INT_STATUS | RX_INT_STATUS | USBCOM_INT_STATUS))
|
|
retval = generic_interrupt(irq, musb);
|
|
|
|
#if defined(CONFIG_USB_INVENTRA_DMA)
|
|
if (l1_ints & DMA_INT_STATUS)
|
|
retval = dma_controller_irq(irq, musb->dma_controller);
|
|
#endif
|
|
return retval;
|
|
}
|
|
|
|
static u32 mtk_musb_busctl_offset(u8 epnum, u16 offset)
|
|
{
|
|
return MTK_MUSB_TXFUNCADDR + offset + 8 * epnum;
|
|
}
|
|
|
|
static u8 mtk_musb_clearb(void __iomem *addr, unsigned int offset)
|
|
{
|
|
u8 data;
|
|
|
|
/* W1C */
|
|
data = musb_readb(addr, offset);
|
|
musb_writeb(addr, offset, data);
|
|
return data;
|
|
}
|
|
|
|
static u16 mtk_musb_clearw(void __iomem *addr, unsigned int offset)
|
|
{
|
|
u16 data;
|
|
|
|
/* W1C */
|
|
data = musb_readw(addr, offset);
|
|
musb_writew(addr, offset, data);
|
|
return data;
|
|
}
|
|
|
|
static int mtk_musb_set_mode(struct musb *musb, u8 mode)
|
|
{
|
|
struct device *dev = musb->controller;
|
|
struct mtk_glue *glue = dev_get_drvdata(dev->parent);
|
|
enum phy_mode new_mode;
|
|
enum usb_role new_role;
|
|
|
|
switch (mode) {
|
|
case MUSB_HOST:
|
|
new_mode = PHY_MODE_USB_HOST;
|
|
new_role = USB_ROLE_HOST;
|
|
break;
|
|
case MUSB_PERIPHERAL:
|
|
new_mode = PHY_MODE_USB_DEVICE;
|
|
new_role = USB_ROLE_DEVICE;
|
|
break;
|
|
case MUSB_OTG:
|
|
new_mode = PHY_MODE_USB_OTG;
|
|
new_role = USB_ROLE_NONE;
|
|
break;
|
|
default:
|
|
dev_err(glue->dev, "Invalid mode request\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (glue->phy_mode == new_mode)
|
|
return 0;
|
|
|
|
if (musb->port_mode != MUSB_OTG) {
|
|
dev_err(glue->dev, "Does not support changing modes\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
mtk_otg_switch_set(glue, new_role);
|
|
return 0;
|
|
}
|
|
|
|
static int mtk_musb_init(struct musb *musb)
|
|
{
|
|
struct device *dev = musb->controller;
|
|
struct mtk_glue *glue = dev_get_drvdata(dev->parent);
|
|
int ret;
|
|
|
|
glue->musb = musb;
|
|
musb->phy = glue->phy;
|
|
musb->xceiv = glue->xceiv;
|
|
musb->is_host = false;
|
|
musb->isr = mtk_musb_interrupt;
|
|
|
|
/* Set TX/RX toggle enable */
|
|
musb_writew(musb->mregs, MUSB_TXTOGEN, MTK_TOGGLE_EN);
|
|
musb_writew(musb->mregs, MUSB_RXTOGEN, MTK_TOGGLE_EN);
|
|
|
|
if (musb->port_mode == MUSB_OTG) {
|
|
ret = mtk_otg_switch_init(glue);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
ret = phy_init(glue->phy);
|
|
if (ret)
|
|
goto err_phy_init;
|
|
|
|
ret = phy_power_on(glue->phy);
|
|
if (ret)
|
|
goto err_phy_power_on;
|
|
|
|
phy_set_mode(glue->phy, glue->phy_mode);
|
|
|
|
#if defined(CONFIG_USB_INVENTRA_DMA)
|
|
musb_writel(musb->mregs, MUSB_HSDMA_INTR,
|
|
DMA_INTR_STATUS_MSK | DMA_INTR_UNMASK_SET_MSK);
|
|
#endif
|
|
musb_writel(musb->mregs, USB_L1INTM, TX_INT_STATUS | RX_INT_STATUS |
|
|
USBCOM_INT_STATUS | DMA_INT_STATUS);
|
|
return 0;
|
|
|
|
err_phy_power_on:
|
|
phy_exit(glue->phy);
|
|
err_phy_init:
|
|
mtk_otg_switch_exit(glue);
|
|
return ret;
|
|
}
|
|
|
|
static u16 mtk_musb_get_toggle(struct musb_qh *qh, int is_out)
|
|
{
|
|
struct musb *musb = qh->hw_ep->musb;
|
|
u8 epnum = qh->hw_ep->epnum;
|
|
u16 toggle;
|
|
|
|
toggle = musb_readw(musb->mregs, is_out ? MUSB_TXTOG : MUSB_RXTOG);
|
|
return toggle & (1 << epnum);
|
|
}
|
|
|
|
static u16 mtk_musb_set_toggle(struct musb_qh *qh, int is_out, struct urb *urb)
|
|
{
|
|
struct musb *musb = qh->hw_ep->musb;
|
|
u8 epnum = qh->hw_ep->epnum;
|
|
u16 value, toggle;
|
|
|
|
toggle = usb_gettoggle(urb->dev, qh->epnum, is_out);
|
|
|
|
if (is_out) {
|
|
value = musb_readw(musb->mregs, MUSB_TXTOG);
|
|
value |= toggle << epnum;
|
|
musb_writew(musb->mregs, MUSB_TXTOG, value);
|
|
} else {
|
|
value = musb_readw(musb->mregs, MUSB_RXTOG);
|
|
value |= toggle << epnum;
|
|
musb_writew(musb->mregs, MUSB_RXTOG, value);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mtk_musb_exit(struct musb *musb)
|
|
{
|
|
struct device *dev = musb->controller;
|
|
struct mtk_glue *glue = dev_get_drvdata(dev->parent);
|
|
|
|
mtk_otg_switch_exit(glue);
|
|
phy_power_off(glue->phy);
|
|
phy_exit(glue->phy);
|
|
mtk_musb_clks_disable(glue);
|
|
|
|
pm_runtime_put_sync(dev);
|
|
pm_runtime_disable(dev);
|
|
return 0;
|
|
}
|
|
|
|
static const struct musb_platform_ops mtk_musb_ops = {
|
|
.quirks = MUSB_DMA_INVENTRA,
|
|
.init = mtk_musb_init,
|
|
.get_toggle = mtk_musb_get_toggle,
|
|
.set_toggle = mtk_musb_set_toggle,
|
|
.exit = mtk_musb_exit,
|
|
#ifdef CONFIG_USB_INVENTRA_DMA
|
|
.dma_init = musbhs_dma_controller_create_noirq,
|
|
.dma_exit = musbhs_dma_controller_destroy,
|
|
#endif
|
|
.clearb = mtk_musb_clearb,
|
|
.clearw = mtk_musb_clearw,
|
|
.busctl_offset = mtk_musb_busctl_offset,
|
|
.set_mode = mtk_musb_set_mode,
|
|
};
|
|
|
|
#define MTK_MUSB_MAX_EP_NUM 8
|
|
#define MTK_MUSB_RAM_BITS 11
|
|
|
|
static struct musb_fifo_cfg mtk_musb_mode_cfg[] = {
|
|
{ .hw_ep_num = 1, .style = FIFO_TX, .maxpacket = 512, },
|
|
{ .hw_ep_num = 1, .style = FIFO_RX, .maxpacket = 512, },
|
|
{ .hw_ep_num = 2, .style = FIFO_TX, .maxpacket = 512, },
|
|
{ .hw_ep_num = 2, .style = FIFO_RX, .maxpacket = 512, },
|
|
{ .hw_ep_num = 3, .style = FIFO_TX, .maxpacket = 512, },
|
|
{ .hw_ep_num = 3, .style = FIFO_RX, .maxpacket = 512, },
|
|
{ .hw_ep_num = 4, .style = FIFO_TX, .maxpacket = 512, },
|
|
{ .hw_ep_num = 4, .style = FIFO_RX, .maxpacket = 512, },
|
|
{ .hw_ep_num = 5, .style = FIFO_TX, .maxpacket = 512, },
|
|
{ .hw_ep_num = 5, .style = FIFO_RX, .maxpacket = 512, },
|
|
{ .hw_ep_num = 6, .style = FIFO_TX, .maxpacket = 1024, },
|
|
{ .hw_ep_num = 6, .style = FIFO_RX, .maxpacket = 1024, },
|
|
{ .hw_ep_num = 7, .style = FIFO_TX, .maxpacket = 512, },
|
|
{ .hw_ep_num = 7, .style = FIFO_RX, .maxpacket = 64, },
|
|
};
|
|
|
|
static const struct musb_hdrc_config mtk_musb_hdrc_config = {
|
|
.fifo_cfg = mtk_musb_mode_cfg,
|
|
.fifo_cfg_size = ARRAY_SIZE(mtk_musb_mode_cfg),
|
|
.multipoint = true,
|
|
.dyn_fifo = true,
|
|
.num_eps = MTK_MUSB_MAX_EP_NUM,
|
|
.ram_bits = MTK_MUSB_RAM_BITS,
|
|
};
|
|
|
|
static const struct platform_device_info mtk_dev_info = {
|
|
.name = "musb-hdrc",
|
|
.id = PLATFORM_DEVID_AUTO,
|
|
.dma_mask = DMA_BIT_MASK(32),
|
|
};
|
|
|
|
static int mtk_musb_probe(struct platform_device *pdev)
|
|
{
|
|
struct musb_hdrc_platform_data *pdata;
|
|
struct mtk_glue *glue;
|
|
struct platform_device_info pinfo;
|
|
struct device *dev = &pdev->dev;
|
|
struct device_node *np = dev->of_node;
|
|
int ret;
|
|
|
|
glue = devm_kzalloc(dev, sizeof(*glue), GFP_KERNEL);
|
|
if (!glue)
|
|
return -ENOMEM;
|
|
|
|
glue->dev = dev;
|
|
pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
|
|
if (!pdata)
|
|
return -ENOMEM;
|
|
|
|
ret = of_platform_populate(np, NULL, NULL, dev);
|
|
if (ret) {
|
|
dev_err(dev, "failed to create child devices at %p\n", np);
|
|
return ret;
|
|
}
|
|
|
|
ret = mtk_musb_clks_get(glue);
|
|
if (ret)
|
|
return ret;
|
|
|
|
pdata->config = &mtk_musb_hdrc_config;
|
|
pdata->platform_ops = &mtk_musb_ops;
|
|
pdata->mode = usb_get_dr_mode(dev);
|
|
|
|
if (IS_ENABLED(CONFIG_USB_MUSB_HOST))
|
|
pdata->mode = USB_DR_MODE_HOST;
|
|
else if (IS_ENABLED(CONFIG_USB_MUSB_GADGET))
|
|
pdata->mode = USB_DR_MODE_PERIPHERAL;
|
|
|
|
switch (pdata->mode) {
|
|
case USB_DR_MODE_HOST:
|
|
glue->phy_mode = PHY_MODE_USB_HOST;
|
|
glue->role = USB_ROLE_HOST;
|
|
break;
|
|
case USB_DR_MODE_PERIPHERAL:
|
|
glue->phy_mode = PHY_MODE_USB_DEVICE;
|
|
glue->role = USB_ROLE_DEVICE;
|
|
break;
|
|
case USB_DR_MODE_OTG:
|
|
glue->phy_mode = PHY_MODE_USB_OTG;
|
|
glue->role = USB_ROLE_NONE;
|
|
break;
|
|
default:
|
|
dev_err(&pdev->dev, "Error 'dr_mode' property\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
glue->phy = devm_of_phy_get_by_index(dev, np, 0);
|
|
if (IS_ERR(glue->phy)) {
|
|
dev_err(dev, "fail to getting phy %ld\n",
|
|
PTR_ERR(glue->phy));
|
|
return PTR_ERR(glue->phy);
|
|
}
|
|
|
|
glue->usb_phy = usb_phy_generic_register();
|
|
if (IS_ERR(glue->usb_phy)) {
|
|
dev_err(dev, "fail to registering usb-phy %ld\n",
|
|
PTR_ERR(glue->usb_phy));
|
|
return PTR_ERR(glue->usb_phy);
|
|
}
|
|
|
|
glue->xceiv = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2);
|
|
if (IS_ERR(glue->xceiv)) {
|
|
dev_err(dev, "fail to getting usb-phy %d\n", ret);
|
|
ret = PTR_ERR(glue->xceiv);
|
|
goto err_unregister_usb_phy;
|
|
}
|
|
|
|
platform_set_drvdata(pdev, glue);
|
|
pm_runtime_enable(dev);
|
|
pm_runtime_get_sync(dev);
|
|
|
|
ret = mtk_musb_clks_enable(glue);
|
|
if (ret)
|
|
goto err_enable_clk;
|
|
|
|
pinfo = mtk_dev_info;
|
|
pinfo.parent = dev;
|
|
pinfo.res = pdev->resource;
|
|
pinfo.num_res = pdev->num_resources;
|
|
pinfo.data = pdata;
|
|
pinfo.size_data = sizeof(*pdata);
|
|
|
|
glue->musb_pdev = platform_device_register_full(&pinfo);
|
|
if (IS_ERR(glue->musb_pdev)) {
|
|
ret = PTR_ERR(glue->musb_pdev);
|
|
dev_err(dev, "failed to register musb device: %d\n", ret);
|
|
goto err_device_register;
|
|
}
|
|
|
|
return 0;
|
|
|
|
err_device_register:
|
|
mtk_musb_clks_disable(glue);
|
|
err_enable_clk:
|
|
pm_runtime_put_sync(dev);
|
|
pm_runtime_disable(dev);
|
|
err_unregister_usb_phy:
|
|
usb_phy_generic_unregister(glue->usb_phy);
|
|
return ret;
|
|
}
|
|
|
|
static int mtk_musb_remove(struct platform_device *pdev)
|
|
{
|
|
struct mtk_glue *glue = platform_get_drvdata(pdev);
|
|
struct platform_device *usb_phy = glue->usb_phy;
|
|
|
|
platform_device_unregister(glue->musb_pdev);
|
|
usb_phy_generic_unregister(usb_phy);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_OF
|
|
static const struct of_device_id mtk_musb_match[] = {
|
|
{.compatible = "mediatek,mtk-musb",},
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, mtk_musb_match);
|
|
#endif
|
|
|
|
static struct platform_driver mtk_musb_driver = {
|
|
.probe = mtk_musb_probe,
|
|
.remove = mtk_musb_remove,
|
|
.driver = {
|
|
.name = "musb-mtk",
|
|
.of_match_table = of_match_ptr(mtk_musb_match),
|
|
},
|
|
};
|
|
|
|
module_platform_driver(mtk_musb_driver);
|
|
|
|
MODULE_DESCRIPTION("MediaTek MUSB Glue Layer");
|
|
MODULE_AUTHOR("Min Guo <min.guo@mediatek.com>");
|
|
MODULE_LICENSE("GPL v2");
|