mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-19 00:54:41 +08:00
2aba2f2a70
In order to support device tree probing of IXP4xx NOR flash chips, a certain big-endian or mixed-endian memory access pattern need to be used. I have opted to use the pattern set by previous plug-ins to physmap for Gemini and Versatile, just override some functions and reuse most of the physmap core code as it is to minimize maintenance. Parts of drivers/mtd/ixp4xx.c are copied into this file. After we have IXP4xx converted fully to device tree, the drivers/mtd/ixp4xx.c file will be deleted and this will be the only access pattern to the IXP4xx flash. I did not keep the quirk in the flash write function after probe, where the old code for a while checks for access to odd addresses, fails and assigns a "faster" write function once it has convinced probe to only use 2-byte accesses. As we mandate that this device should be using bank-width = <2> this should not be a problem unless misconfigured. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
133 lines
3.2 KiB
C
133 lines
3.2 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Intel IXP4xx OF physmap add-on
|
|
* Copyright (C) 2019 Linus Walleij <linus.walleij@linaro.org>
|
|
*
|
|
* Based on the ixp4xx.c map driver, originally written by:
|
|
* Intel Corporation
|
|
* Deepak Saxena <dsaxena@mvista.com>
|
|
* Copyright (C) 2002 Intel Corporation
|
|
* Copyright (C) 2003-2004 MontaVista Software, Inc.
|
|
*/
|
|
#include <linux/export.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/mtd/map.h>
|
|
#include <linux/mtd/xip.h>
|
|
#include "physmap-ixp4xx.h"
|
|
|
|
/*
|
|
* Read/write a 16 bit word from flash address 'addr'.
|
|
*
|
|
* When the cpu is in little-endian mode it swizzles the address lines
|
|
* ('address coherency') so we need to undo the swizzling to ensure commands
|
|
* and the like end up on the correct flash address.
|
|
*
|
|
* To further complicate matters, due to the way the expansion bus controller
|
|
* handles 32 bit reads, the byte stream ABCD is stored on the flash as:
|
|
* D15 D0
|
|
* +---+---+
|
|
* | A | B | 0
|
|
* +---+---+
|
|
* | C | D | 2
|
|
* +---+---+
|
|
* This means that on LE systems each 16 bit word must be swapped. Note that
|
|
* this requires CONFIG_MTD_CFI_BE_BYTE_SWAP to be enabled to 'unswap' the CFI
|
|
* data and other flash commands which are always in D7-D0.
|
|
*/
|
|
#ifndef CONFIG_CPU_BIG_ENDIAN
|
|
|
|
static inline u16 flash_read16(void __iomem *addr)
|
|
{
|
|
return be16_to_cpu(__raw_readw((void __iomem *)((unsigned long)addr ^ 0x2)));
|
|
}
|
|
|
|
static inline void flash_write16(u16 d, void __iomem *addr)
|
|
{
|
|
__raw_writew(cpu_to_be16(d), (void __iomem *)((unsigned long)addr ^ 0x2));
|
|
}
|
|
|
|
#define BYTE0(h) ((h) & 0xFF)
|
|
#define BYTE1(h) (((h) >> 8) & 0xFF)
|
|
|
|
#else
|
|
|
|
static inline u16 flash_read16(const void __iomem *addr)
|
|
{
|
|
return __raw_readw(addr);
|
|
}
|
|
|
|
static inline void flash_write16(u16 d, void __iomem *addr)
|
|
{
|
|
__raw_writew(d, addr);
|
|
}
|
|
|
|
#define BYTE0(h) (((h) >> 8) & 0xFF)
|
|
#define BYTE1(h) ((h) & 0xFF)
|
|
#endif
|
|
|
|
static map_word ixp4xx_read16(struct map_info *map, unsigned long ofs)
|
|
{
|
|
map_word val;
|
|
|
|
val.x[0] = flash_read16(map->virt + ofs);
|
|
return val;
|
|
}
|
|
|
|
/*
|
|
* The IXP4xx expansion bus only allows 16-bit wide acceses
|
|
* when attached to a 16-bit wide device (such as the 28F128J3A),
|
|
* so we can't just memcpy_fromio().
|
|
*/
|
|
static void ixp4xx_copy_from(struct map_info *map, void *to,
|
|
unsigned long from, ssize_t len)
|
|
{
|
|
u8 *dest = (u8 *) to;
|
|
void __iomem *src = map->virt + from;
|
|
|
|
if (len <= 0)
|
|
return;
|
|
|
|
if (from & 1) {
|
|
*dest++ = BYTE1(flash_read16(src-1));
|
|
src++;
|
|
--len;
|
|
}
|
|
|
|
while (len >= 2) {
|
|
u16 data = flash_read16(src);
|
|
*dest++ = BYTE0(data);
|
|
*dest++ = BYTE1(data);
|
|
src += 2;
|
|
len -= 2;
|
|
}
|
|
|
|
if (len > 0)
|
|
*dest++ = BYTE0(flash_read16(src));
|
|
}
|
|
|
|
static void ixp4xx_write16(struct map_info *map, map_word d, unsigned long adr)
|
|
{
|
|
flash_write16(d.x[0], map->virt + adr);
|
|
}
|
|
|
|
int of_flash_probe_ixp4xx(struct platform_device *pdev,
|
|
struct device_node *np,
|
|
struct map_info *map)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
|
|
/* Multiplatform guard */
|
|
if (!of_device_is_compatible(np, "intel,ixp4xx-flash"))
|
|
return 0;
|
|
|
|
map->read = ixp4xx_read16;
|
|
map->write = ixp4xx_write16;
|
|
map->copy_from = ixp4xx_copy_from;
|
|
map->copy_to = NULL;
|
|
|
|
dev_info(dev, "initialized Intel IXP4xx-specific physmap control\n");
|
|
|
|
return 0;
|
|
}
|