mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-23 20:24:12 +08:00
1ec6d09789
- Optimize ftrace and kprobes code patching and avoid stop machine for kprobes if sequential instruction fetching facility is available - Add hiperdispatch feature to dynamically adjust CPU capacity in vertical polarization to improve scheduling efficiency and overall performance. Also add infrastructure for handling warning track interrupts (WTI), allowing for graceful CPU preemption - Rework crypto code pkey module and split it into separate, independent modules for sysfs, PCKMO, CCA, and EP11, allowing modules to load only when the relevant hardware is available - Add hardware acceleration for HMAC modes and the full AES-XTS cipher, utilizing message-security assist extensions (MSA) 10 and 11. It introduces new shash implementations for HMAC-SHA224/256/384/512 and registers the hardware-accelerated AES-XTS cipher as the preferred option. Also add clear key token support - Add MSA 10 and 11 processor activity instrumentation counters to perf and update PAI Extension 1 NNPA counters - Cleanup cpu sampling facility code and rework debug/WARN_ON_ONCE statements - Add support for SHA3 performance enhancements introduced with MSA 12 - Add support for the query authentication information feature of MSA 13 and introduce the KDSA CPACF instruction. Provide query and query authentication information in sysfs, enabling tools like cpacfinfo to present this data in a human-readable form - Update kernel disassembler instructions - Always enable EXPOLINE_EXTERN if supported by the compiler to ensure kpatch compatibility - Add missing warning handling and relocated lowcore support to the early program check handler - Optimize ftrace_return_address() and avoid calling unwinder - Make modules use kernel ftrace trampolines - Strip relocs from the final vmlinux ELF file to make it roughly 2 times smaller - Dump register contents and call trace for early crashes to the console - Generate ptdump address marker array dynamically - Fix rcu_sched stalls that might occur when adding or removing large amounts of pages at once to or from the CMM balloon - Fix deadlock caused by recursive lock of the AP bus scan mutex - Unify sync and async register save areas in entry code - Cleanup debug prints in crypto code - Various cleanup and sanitizing patches for the decompressor - Various small ftrace cleanups -----BEGIN PGP SIGNATURE----- iQEzBAABCAAdFiEE3QHqV+H2a8xAv27vjYWKoQLXFBgFAmbsZawACgkQjYWKoQLX FBg+Ogf+NiKPfvI14NcTwnOHB6qz8ApPdGfN9bNVtQxtK3epeAvtj0cMonAuKpRg xckTRRd8y0guhCT7Q2+WitSgA5eYDn+u9/Ux5YuKUdUdXolQ0D64BJNtVeEFkmJj s+Lesb8cVI9T2VBZOpuF9lJigfsDALBkFroqN4MDudDeahS+qy33bAc0OoqYNXHo S6OwPK1/tEG9O/oTN2V4mN+aP0B3/dl7Msezb0gfAXQJA+WUAyMNK0RHvoG9uzaa BWAyWWYABj6woGZEAQAzXcbzkQiRPixTqZVe6e4YndXhIlEnB/Z2AQFdTpT9V7En eOmmve3QuJa0hkF9q4H/anvOMPntTg== =Xagq -----END PGP SIGNATURE----- Merge tag 's390-6.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Vasily Gorbik: - Optimize ftrace and kprobes code patching and avoid stop machine for kprobes if sequential instruction fetching facility is available - Add hiperdispatch feature to dynamically adjust CPU capacity in vertical polarization to improve scheduling efficiency and overall performance. Also add infrastructure for handling warning track interrupts (WTI), allowing for graceful CPU preemption - Rework crypto code pkey module and split it into separate, independent modules for sysfs, PCKMO, CCA, and EP11, allowing modules to load only when the relevant hardware is available - Add hardware acceleration for HMAC modes and the full AES-XTS cipher, utilizing message-security assist extensions (MSA) 10 and 11. It introduces new shash implementations for HMAC-SHA224/256/384/512 and registers the hardware-accelerated AES-XTS cipher as the preferred option. Also add clear key token support - Add MSA 10 and 11 processor activity instrumentation counters to perf and update PAI Extension 1 NNPA counters - Cleanup cpu sampling facility code and rework debug/WARN_ON_ONCE statements - Add support for SHA3 performance enhancements introduced with MSA 12 - Add support for the query authentication information feature of MSA 13 and introduce the KDSA CPACF instruction. Provide query and query authentication information in sysfs, enabling tools like cpacfinfo to present this data in a human-readable form - Update kernel disassembler instructions - Always enable EXPOLINE_EXTERN if supported by the compiler to ensure kpatch compatibility - Add missing warning handling and relocated lowcore support to the early program check handler - Optimize ftrace_return_address() and avoid calling unwinder - Make modules use kernel ftrace trampolines - Strip relocs from the final vmlinux ELF file to make it roughly 2 times smaller - Dump register contents and call trace for early crashes to the console - Generate ptdump address marker array dynamically - Fix rcu_sched stalls that might occur when adding or removing large amounts of pages at once to or from the CMM balloon - Fix deadlock caused by recursive lock of the AP bus scan mutex - Unify sync and async register save areas in entry code - Cleanup debug prints in crypto code - Various cleanup and sanitizing patches for the decompressor - Various small ftrace cleanups * tag 's390-6.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (84 commits) s390/crypto: Display Query and Query Authentication Information in sysfs s390/crypto: Add Support for Query Authentication Information s390/crypto: Rework RRE and RRF CPACF inline functions s390/crypto: Add KDSA CPACF Instruction s390/disassembler: Remove duplicate instruction format RSY_RDRU s390/boot: Move boot_printk() code to own file s390/boot: Use boot_printk() instead of sclp_early_printk() s390/boot: Rename decompressor_printk() to boot_printk() s390/boot: Compile all files with the same march flag s390: Use MARCH_HAS_*_FEATURES defines s390: Provide MARCH_HAS_*_FEATURES defines s390/facility: Disable compile time optimization for decompressor code s390/boot: Increase minimum architecture to z10 s390/als: Remove obsolete comment s390/sha3: Fix SHA3 selftests failures s390/pkey: Add AES xts and HMAC clear key token support s390/cpacf: Add MSA 10 and 11 new PCKMO functions s390/mm: Add cond_resched() to cmm_alloc/free_pages() s390/pai_ext: Update PAI extension 1 counters s390/pai_crypto: Add support for MSA 10 and 11 pai counters ...
668 lines
19 KiB
ArmAsm
668 lines
19 KiB
ArmAsm
/* SPDX-License-Identifier: GPL-2.0 */
|
|
/*
|
|
* S390 low-level entry points.
|
|
*
|
|
* Copyright IBM Corp. 1999, 2012
|
|
* Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com),
|
|
* Hartmut Penner (hp@de.ibm.com),
|
|
* Denis Joseph Barrow (djbarrow@de.ibm.com,barrow_dj@yahoo.com),
|
|
*/
|
|
|
|
#include <linux/export.h>
|
|
#include <linux/init.h>
|
|
#include <linux/linkage.h>
|
|
#include <asm/asm-extable.h>
|
|
#include <asm/alternative.h>
|
|
#include <asm/processor.h>
|
|
#include <asm/cache.h>
|
|
#include <asm/dwarf.h>
|
|
#include <asm/errno.h>
|
|
#include <asm/ptrace.h>
|
|
#include <asm/thread_info.h>
|
|
#include <asm/asm-offsets.h>
|
|
#include <asm/unistd.h>
|
|
#include <asm/page.h>
|
|
#include <asm/sigp.h>
|
|
#include <asm/irq.h>
|
|
#include <asm/fpu-insn.h>
|
|
#include <asm/setup.h>
|
|
#include <asm/nmi.h>
|
|
#include <asm/nospec-insn.h>
|
|
#include <asm/lowcore.h>
|
|
|
|
_LPP_OFFSET = __LC_LPP
|
|
|
|
.macro STBEAR address
|
|
ALTERNATIVE "nop", ".insn s,0xb2010000,\address", ALT_FACILITY(193)
|
|
.endm
|
|
|
|
.macro LBEAR address
|
|
ALTERNATIVE "nop", ".insn s,0xb2000000,\address", ALT_FACILITY(193)
|
|
.endm
|
|
|
|
.macro LPSWEY address, lpswe
|
|
ALTERNATIVE_2 "b \lpswe;nopr", \
|
|
".insn siy,0xeb0000000071,\address,0", ALT_FACILITY(193), \
|
|
__stringify(.insn siy,0xeb0000000071,LOWCORE_ALT_ADDRESS+\address,0), \
|
|
ALT_LOWCORE
|
|
.endm
|
|
|
|
.macro MBEAR reg, lowcore
|
|
ALTERNATIVE "brcl 0,0", __stringify(mvc __PT_LAST_BREAK(8,\reg),__LC_LAST_BREAK(\lowcore)),\
|
|
ALT_FACILITY(193)
|
|
.endm
|
|
|
|
.macro CHECK_STACK savearea, lowcore
|
|
#ifdef CONFIG_CHECK_STACK
|
|
tml %r15,THREAD_SIZE - CONFIG_STACK_GUARD
|
|
la %r14,\savearea(\lowcore)
|
|
jz stack_overflow
|
|
#endif
|
|
.endm
|
|
|
|
.macro CHECK_VMAP_STACK savearea, lowcore, oklabel
|
|
#ifdef CONFIG_VMAP_STACK
|
|
lgr %r14,%r15
|
|
nill %r14,0x10000 - THREAD_SIZE
|
|
oill %r14,STACK_INIT_OFFSET
|
|
clg %r14,__LC_KERNEL_STACK(\lowcore)
|
|
je \oklabel
|
|
clg %r14,__LC_ASYNC_STACK(\lowcore)
|
|
je \oklabel
|
|
clg %r14,__LC_MCCK_STACK(\lowcore)
|
|
je \oklabel
|
|
clg %r14,__LC_NODAT_STACK(\lowcore)
|
|
je \oklabel
|
|
clg %r14,__LC_RESTART_STACK(\lowcore)
|
|
je \oklabel
|
|
la %r14,\savearea(\lowcore)
|
|
j stack_overflow
|
|
#else
|
|
j \oklabel
|
|
#endif
|
|
.endm
|
|
|
|
/*
|
|
* The TSTMSK macro generates a test-under-mask instruction by
|
|
* calculating the memory offset for the specified mask value.
|
|
* Mask value can be any constant. The macro shifts the mask
|
|
* value to calculate the memory offset for the test-under-mask
|
|
* instruction.
|
|
*/
|
|
.macro TSTMSK addr, mask, size=8, bytepos=0
|
|
.if (\bytepos < \size) && (\mask >> 8)
|
|
.if (\mask & 0xff)
|
|
.error "Mask exceeds byte boundary"
|
|
.endif
|
|
TSTMSK \addr, "(\mask >> 8)", \size, "(\bytepos + 1)"
|
|
.exitm
|
|
.endif
|
|
.ifeq \mask
|
|
.error "Mask must not be zero"
|
|
.endif
|
|
off = \size - \bytepos - 1
|
|
tm off+\addr, \mask
|
|
.endm
|
|
|
|
.macro BPOFF
|
|
ALTERNATIVE "nop", ".insn rrf,0xb2e80000,0,0,12,0", ALT_SPEC(82)
|
|
.endm
|
|
|
|
.macro BPON
|
|
ALTERNATIVE "nop", ".insn rrf,0xb2e80000,0,0,13,0", ALT_SPEC(82)
|
|
.endm
|
|
|
|
.macro BPENTER tif_ptr,tif_mask
|
|
ALTERNATIVE "TSTMSK \tif_ptr,\tif_mask; jz .+8; .insn rrf,0xb2e80000,0,0,13,0", \
|
|
"j .+12; nop; nop", ALT_SPEC(82)
|
|
.endm
|
|
|
|
.macro BPEXIT tif_ptr,tif_mask
|
|
TSTMSK \tif_ptr,\tif_mask
|
|
ALTERNATIVE "jz .+8; .insn rrf,0xb2e80000,0,0,12,0", \
|
|
"jnz .+8; .insn rrf,0xb2e80000,0,0,13,0", ALT_SPEC(82)
|
|
.endm
|
|
|
|
#if IS_ENABLED(CONFIG_KVM)
|
|
.macro SIEEXIT sie_control,lowcore
|
|
lg %r9,\sie_control # get control block pointer
|
|
ni __SIE_PROG0C+3(%r9),0xfe # no longer in SIE
|
|
lctlg %c1,%c1,__LC_KERNEL_ASCE(\lowcore) # load primary asce
|
|
lg %r9,__LC_CURRENT(\lowcore)
|
|
mvi __TI_sie(%r9),0
|
|
larl %r9,sie_exit # skip forward to sie_exit
|
|
.endm
|
|
#endif
|
|
|
|
.macro STACKLEAK_ERASE
|
|
#ifdef CONFIG_GCC_PLUGIN_STACKLEAK
|
|
brasl %r14,stackleak_erase_on_task_stack
|
|
#endif
|
|
.endm
|
|
|
|
GEN_BR_THUNK %r14
|
|
|
|
.section .kprobes.text, "ax"
|
|
.Ldummy:
|
|
/*
|
|
* The following nop exists only in order to avoid that the next
|
|
* symbol starts at the beginning of the kprobes text section.
|
|
* In that case there would be several symbols at the same address.
|
|
* E.g. objdump would take an arbitrary symbol when disassembling
|
|
* the code.
|
|
* With the added nop in between this cannot happen.
|
|
*/
|
|
nop 0
|
|
|
|
/*
|
|
* Scheduler resume function, called by __switch_to
|
|
* gpr2 = (task_struct *)prev
|
|
* gpr3 = (task_struct *)next
|
|
* Returns:
|
|
* gpr2 = prev
|
|
*/
|
|
SYM_FUNC_START(__switch_to_asm)
|
|
stmg %r6,%r15,__SF_GPRS(%r15) # store gprs of prev task
|
|
lghi %r4,__TASK_stack
|
|
lghi %r1,__TASK_thread
|
|
llill %r5,STACK_INIT_OFFSET
|
|
stg %r15,__THREAD_ksp(%r1,%r2) # store kernel stack of prev
|
|
lg %r15,0(%r4,%r3) # start of kernel stack of next
|
|
agr %r15,%r5 # end of kernel stack of next
|
|
GET_LC %r13
|
|
stg %r3,__LC_CURRENT(%r13) # store task struct of next
|
|
stg %r15,__LC_KERNEL_STACK(%r13) # store end of kernel stack
|
|
lg %r15,__THREAD_ksp(%r1,%r3) # load kernel stack of next
|
|
aghi %r3,__TASK_pid
|
|
mvc __LC_CURRENT_PID(4,%r13),0(%r3) # store pid of next
|
|
ALTERNATIVE "nop", "lpp _LPP_OFFSET(%r13)", ALT_FACILITY(40)
|
|
lmg %r6,%r15,__SF_GPRS(%r15) # load gprs of next task
|
|
BR_EX %r14
|
|
SYM_FUNC_END(__switch_to_asm)
|
|
|
|
#if IS_ENABLED(CONFIG_KVM)
|
|
/*
|
|
* __sie64a calling convention:
|
|
* %r2 pointer to sie control block phys
|
|
* %r3 pointer to sie control block virt
|
|
* %r4 guest register save area
|
|
* %r5 guest asce
|
|
*/
|
|
SYM_FUNC_START(__sie64a)
|
|
stmg %r6,%r14,__SF_GPRS(%r15) # save kernel registers
|
|
GET_LC %r13
|
|
lg %r14,__LC_CURRENT(%r13)
|
|
stg %r2,__SF_SIE_CONTROL_PHYS(%r15) # save sie block physical..
|
|
stg %r3,__SF_SIE_CONTROL(%r15) # ...and virtual addresses
|
|
stg %r4,__SF_SIE_SAVEAREA(%r15) # save guest register save area
|
|
stg %r5,__SF_SIE_GUEST_ASCE(%r15) # save guest asce
|
|
xc __SF_SIE_REASON(8,%r15),__SF_SIE_REASON(%r15) # reason code = 0
|
|
mvc __SF_SIE_FLAGS(8,%r15),__TI_flags(%r14) # copy thread flags
|
|
lmg %r0,%r13,0(%r4) # load guest gprs 0-13
|
|
mvi __TI_sie(%r14),1
|
|
lctlg %c1,%c1,__SF_SIE_GUEST_ASCE(%r15) # load primary asce
|
|
lg %r14,__SF_SIE_CONTROL(%r15) # get control block pointer
|
|
oi __SIE_PROG0C+3(%r14),1 # we are going into SIE now
|
|
tm __SIE_PROG20+3(%r14),3 # last exit...
|
|
jnz .Lsie_skip
|
|
lg %r14,__SF_SIE_CONTROL_PHYS(%r15) # get sie block phys addr
|
|
BPEXIT __SF_SIE_FLAGS(%r15),_TIF_ISOLATE_BP_GUEST
|
|
.Lsie_entry:
|
|
sie 0(%r14)
|
|
# Let the next instruction be NOP to avoid triggering a machine check
|
|
# and handling it in a guest as result of the instruction execution.
|
|
nopr 7
|
|
.Lsie_leave:
|
|
BPOFF
|
|
BPENTER __SF_SIE_FLAGS(%r15),_TIF_ISOLATE_BP_GUEST
|
|
.Lsie_skip:
|
|
lg %r14,__SF_SIE_CONTROL(%r15) # get control block pointer
|
|
ni __SIE_PROG0C+3(%r14),0xfe # no longer in SIE
|
|
GET_LC %r14
|
|
lctlg %c1,%c1,__LC_KERNEL_ASCE(%r14) # load primary asce
|
|
lg %r14,__LC_CURRENT(%r14)
|
|
mvi __TI_sie(%r14),0
|
|
# some program checks are suppressing. C code (e.g. do_protection_exception)
|
|
# will rewind the PSW by the ILC, which is often 4 bytes in case of SIE. There
|
|
# are some corner cases (e.g. runtime instrumentation) where ILC is unpredictable.
|
|
# Other instructions between __sie64a and .Lsie_done should not cause program
|
|
# interrupts. So lets use 3 nops as a landing pad for all possible rewinds.
|
|
.Lrewind_pad6:
|
|
nopr 7
|
|
.Lrewind_pad4:
|
|
nopr 7
|
|
.Lrewind_pad2:
|
|
nopr 7
|
|
SYM_INNER_LABEL(sie_exit, SYM_L_GLOBAL)
|
|
lg %r14,__SF_SIE_SAVEAREA(%r15) # load guest register save area
|
|
stmg %r0,%r13,0(%r14) # save guest gprs 0-13
|
|
xgr %r0,%r0 # clear guest registers to
|
|
xgr %r1,%r1 # prevent speculative use
|
|
xgr %r3,%r3
|
|
xgr %r4,%r4
|
|
xgr %r5,%r5
|
|
lmg %r6,%r14,__SF_GPRS(%r15) # restore kernel registers
|
|
lg %r2,__SF_SIE_REASON(%r15) # return exit reason code
|
|
BR_EX %r14
|
|
.Lsie_fault:
|
|
lghi %r14,-EFAULT
|
|
stg %r14,__SF_SIE_REASON(%r15) # set exit reason code
|
|
j sie_exit
|
|
|
|
EX_TABLE(.Lrewind_pad6,.Lsie_fault)
|
|
EX_TABLE(.Lrewind_pad4,.Lsie_fault)
|
|
EX_TABLE(.Lrewind_pad2,.Lsie_fault)
|
|
EX_TABLE(sie_exit,.Lsie_fault)
|
|
SYM_FUNC_END(__sie64a)
|
|
EXPORT_SYMBOL(__sie64a)
|
|
EXPORT_SYMBOL(sie_exit)
|
|
#endif
|
|
|
|
/*
|
|
* SVC interrupt handler routine. System calls are synchronous events and
|
|
* are entered with interrupts disabled.
|
|
*/
|
|
|
|
SYM_CODE_START(system_call)
|
|
STMG_LC %r8,%r15,__LC_SAVE_AREA
|
|
GET_LC %r13
|
|
stpt __LC_SYS_ENTER_TIMER(%r13)
|
|
BPOFF
|
|
lghi %r14,0
|
|
.Lsysc_per:
|
|
STBEAR __LC_LAST_BREAK(%r13)
|
|
lctlg %c1,%c1,__LC_KERNEL_ASCE(%r13)
|
|
lg %r15,__LC_KERNEL_STACK(%r13)
|
|
xc __SF_BACKCHAIN(8,%r15),__SF_BACKCHAIN(%r15)
|
|
stmg %r0,%r7,STACK_FRAME_OVERHEAD+__PT_R0(%r15)
|
|
# clear user controlled register to prevent speculative use
|
|
xgr %r0,%r0
|
|
xgr %r1,%r1
|
|
xgr %r4,%r4
|
|
xgr %r5,%r5
|
|
xgr %r6,%r6
|
|
xgr %r7,%r7
|
|
xgr %r8,%r8
|
|
xgr %r9,%r9
|
|
xgr %r10,%r10
|
|
xgr %r11,%r11
|
|
la %r2,STACK_FRAME_OVERHEAD(%r15) # pointer to pt_regs
|
|
mvc __PT_R8(64,%r2),__LC_SAVE_AREA(%r13)
|
|
MBEAR %r2,%r13
|
|
lgr %r3,%r14
|
|
brasl %r14,__do_syscall
|
|
STACKLEAK_ERASE
|
|
lctlg %c1,%c1,__LC_USER_ASCE(%r13)
|
|
mvc __LC_RETURN_PSW(16,%r13),STACK_FRAME_OVERHEAD+__PT_PSW(%r15)
|
|
BPON
|
|
LBEAR STACK_FRAME_OVERHEAD+__PT_LAST_BREAK(%r15)
|
|
stpt __LC_EXIT_TIMER(%r13)
|
|
lmg %r0,%r15,STACK_FRAME_OVERHEAD+__PT_R0(%r15)
|
|
LPSWEY __LC_RETURN_PSW,__LC_RETURN_LPSWE
|
|
SYM_CODE_END(system_call)
|
|
|
|
#
|
|
# a new process exits the kernel with ret_from_fork
|
|
#
|
|
SYM_CODE_START(ret_from_fork)
|
|
lgr %r3,%r11
|
|
brasl %r14,__ret_from_fork
|
|
STACKLEAK_ERASE
|
|
GET_LC %r13
|
|
lctlg %c1,%c1,__LC_USER_ASCE(%r13)
|
|
mvc __LC_RETURN_PSW(16,%r13),STACK_FRAME_OVERHEAD+__PT_PSW(%r15)
|
|
BPON
|
|
LBEAR STACK_FRAME_OVERHEAD+__PT_LAST_BREAK(%r15)
|
|
stpt __LC_EXIT_TIMER(%r13)
|
|
lmg %r0,%r15,STACK_FRAME_OVERHEAD+__PT_R0(%r15)
|
|
LPSWEY __LC_RETURN_PSW,__LC_RETURN_LPSWE
|
|
SYM_CODE_END(ret_from_fork)
|
|
|
|
/*
|
|
* Program check handler routine
|
|
*/
|
|
|
|
SYM_CODE_START(pgm_check_handler)
|
|
STMG_LC %r8,%r15,__LC_SAVE_AREA
|
|
GET_LC %r13
|
|
stpt __LC_SYS_ENTER_TIMER(%r13)
|
|
BPOFF
|
|
lgr %r10,%r15
|
|
lmg %r8,%r9,__LC_PGM_OLD_PSW(%r13)
|
|
tmhh %r8,0x0001 # coming from user space?
|
|
jno .Lpgm_skip_asce
|
|
lctlg %c1,%c1,__LC_KERNEL_ASCE(%r13)
|
|
j 3f # -> fault in user space
|
|
.Lpgm_skip_asce:
|
|
1: tmhh %r8,0x4000 # PER bit set in old PSW ?
|
|
jnz 2f # -> enabled, can't be a double fault
|
|
tm __LC_PGM_ILC+3(%r13),0x80 # check for per exception
|
|
jnz .Lpgm_svcper # -> single stepped svc
|
|
2: CHECK_STACK __LC_SAVE_AREA,%r13
|
|
aghi %r15,-(STACK_FRAME_OVERHEAD + __PT_SIZE)
|
|
# CHECK_VMAP_STACK branches to stack_overflow or 4f
|
|
CHECK_VMAP_STACK __LC_SAVE_AREA,%r13,4f
|
|
3: lg %r15,__LC_KERNEL_STACK(%r13)
|
|
4: la %r11,STACK_FRAME_OVERHEAD(%r15)
|
|
xc __PT_FLAGS(8,%r11),__PT_FLAGS(%r11)
|
|
xc __SF_BACKCHAIN(8,%r15),__SF_BACKCHAIN(%r15)
|
|
stmg %r0,%r7,__PT_R0(%r11)
|
|
mvc __PT_R8(64,%r11),__LC_SAVE_AREA(%r13)
|
|
mvc __PT_LAST_BREAK(8,%r11),__LC_PGM_LAST_BREAK(%r13)
|
|
stctg %c1,%c1,__PT_CR1(%r11)
|
|
#if IS_ENABLED(CONFIG_KVM)
|
|
ltg %r12,__LC_GMAP(%r13)
|
|
jz 5f
|
|
clc __GMAP_ASCE(8,%r12), __PT_CR1(%r11)
|
|
jne 5f
|
|
BPENTER __SF_SIE_FLAGS(%r10),_TIF_ISOLATE_BP_GUEST
|
|
SIEEXIT __SF_SIE_CONTROL(%r10),%r13
|
|
#endif
|
|
5: stmg %r8,%r9,__PT_PSW(%r11)
|
|
# clear user controlled registers to prevent speculative use
|
|
xgr %r0,%r0
|
|
xgr %r1,%r1
|
|
xgr %r3,%r3
|
|
xgr %r4,%r4
|
|
xgr %r5,%r5
|
|
xgr %r6,%r6
|
|
xgr %r7,%r7
|
|
lgr %r2,%r11
|
|
brasl %r14,__do_pgm_check
|
|
tmhh %r8,0x0001 # returning to user space?
|
|
jno .Lpgm_exit_kernel
|
|
STACKLEAK_ERASE
|
|
lctlg %c1,%c1,__LC_USER_ASCE(%r13)
|
|
BPON
|
|
stpt __LC_EXIT_TIMER(%r13)
|
|
.Lpgm_exit_kernel:
|
|
mvc __LC_RETURN_PSW(16,%r13),STACK_FRAME_OVERHEAD+__PT_PSW(%r15)
|
|
LBEAR STACK_FRAME_OVERHEAD+__PT_LAST_BREAK(%r15)
|
|
lmg %r0,%r15,STACK_FRAME_OVERHEAD+__PT_R0(%r15)
|
|
LPSWEY __LC_RETURN_PSW,__LC_RETURN_LPSWE
|
|
|
|
#
|
|
# single stepped system call
|
|
#
|
|
.Lpgm_svcper:
|
|
mvc __LC_RETURN_PSW(8,%r13),__LC_SVC_NEW_PSW(%r13)
|
|
larl %r14,.Lsysc_per
|
|
stg %r14,__LC_RETURN_PSW+8(%r13)
|
|
lghi %r14,1
|
|
LBEAR __LC_PGM_LAST_BREAK(%r13)
|
|
LPSWEY __LC_RETURN_PSW,__LC_RETURN_LPSWE # branch to .Lsysc_per
|
|
SYM_CODE_END(pgm_check_handler)
|
|
|
|
/*
|
|
* Interrupt handler macro used for external and IO interrupts.
|
|
*/
|
|
.macro INT_HANDLER name,lc_old_psw,handler
|
|
SYM_CODE_START(\name)
|
|
STMG_LC %r8,%r15,__LC_SAVE_AREA
|
|
GET_LC %r13
|
|
stckf __LC_INT_CLOCK(%r13)
|
|
stpt __LC_SYS_ENTER_TIMER(%r13)
|
|
STBEAR __LC_LAST_BREAK(%r13)
|
|
BPOFF
|
|
lmg %r8,%r9,\lc_old_psw(%r13)
|
|
tmhh %r8,0x0001 # interrupting from user ?
|
|
jnz 1f
|
|
#if IS_ENABLED(CONFIG_KVM)
|
|
lg %r10,__LC_CURRENT(%r13)
|
|
tm __TI_sie(%r10),0xff
|
|
jz 0f
|
|
BPENTER __SF_SIE_FLAGS(%r15),_TIF_ISOLATE_BP_GUEST
|
|
SIEEXIT __SF_SIE_CONTROL(%r15),%r13
|
|
#endif
|
|
0: CHECK_STACK __LC_SAVE_AREA,%r13
|
|
aghi %r15,-(STACK_FRAME_OVERHEAD + __PT_SIZE)
|
|
j 2f
|
|
1: lctlg %c1,%c1,__LC_KERNEL_ASCE(%r13)
|
|
lg %r15,__LC_KERNEL_STACK(%r13)
|
|
2: xc __SF_BACKCHAIN(8,%r15),__SF_BACKCHAIN(%r15)
|
|
la %r11,STACK_FRAME_OVERHEAD(%r15)
|
|
stmg %r0,%r7,__PT_R0(%r11)
|
|
# clear user controlled registers to prevent speculative use
|
|
xgr %r0,%r0
|
|
xgr %r1,%r1
|
|
xgr %r3,%r3
|
|
xgr %r4,%r4
|
|
xgr %r5,%r5
|
|
xgr %r6,%r6
|
|
xgr %r7,%r7
|
|
xgr %r10,%r10
|
|
xc __PT_FLAGS(8,%r11),__PT_FLAGS(%r11)
|
|
mvc __PT_R8(64,%r11),__LC_SAVE_AREA(%r13)
|
|
MBEAR %r11,%r13
|
|
stmg %r8,%r9,__PT_PSW(%r11)
|
|
lgr %r2,%r11 # pass pointer to pt_regs
|
|
brasl %r14,\handler
|
|
mvc __LC_RETURN_PSW(16,%r13),__PT_PSW(%r11)
|
|
tmhh %r8,0x0001 # returning to user ?
|
|
jno 2f
|
|
STACKLEAK_ERASE
|
|
lctlg %c1,%c1,__LC_USER_ASCE(%r13)
|
|
BPON
|
|
stpt __LC_EXIT_TIMER(%r13)
|
|
2: LBEAR __PT_LAST_BREAK(%r11)
|
|
lmg %r0,%r15,__PT_R0(%r11)
|
|
LPSWEY __LC_RETURN_PSW,__LC_RETURN_LPSWE
|
|
SYM_CODE_END(\name)
|
|
.endm
|
|
|
|
INT_HANDLER ext_int_handler,__LC_EXT_OLD_PSW,do_ext_irq
|
|
INT_HANDLER io_int_handler,__LC_IO_OLD_PSW,do_io_irq
|
|
|
|
/*
|
|
* Machine check handler routines
|
|
*/
|
|
SYM_CODE_START(mcck_int_handler)
|
|
BPOFF
|
|
GET_LC %r13
|
|
lmg %r8,%r9,__LC_MCK_OLD_PSW(%r13)
|
|
TSTMSK __LC_MCCK_CODE(%r13),MCCK_CODE_SYSTEM_DAMAGE
|
|
jo .Lmcck_panic # yes -> rest of mcck code invalid
|
|
TSTMSK __LC_MCCK_CODE(%r13),MCCK_CODE_CR_VALID
|
|
jno .Lmcck_panic # control registers invalid -> panic
|
|
ptlb
|
|
lay %r14,__LC_CPU_TIMER_SAVE_AREA(%r13)
|
|
mvc __LC_MCCK_ENTER_TIMER(8,%r13),0(%r14)
|
|
TSTMSK __LC_MCCK_CODE(%r13),MCCK_CODE_CPU_TIMER_VALID
|
|
jo 3f
|
|
la %r14,__LC_SYS_ENTER_TIMER(%r13)
|
|
clc 0(8,%r14),__LC_EXIT_TIMER(%r13)
|
|
jl 1f
|
|
la %r14,__LC_EXIT_TIMER(%r13)
|
|
1: clc 0(8,%r14),__LC_LAST_UPDATE_TIMER(%r13)
|
|
jl 2f
|
|
la %r14,__LC_LAST_UPDATE_TIMER(%r13)
|
|
2: spt 0(%r14)
|
|
mvc __LC_MCCK_ENTER_TIMER(8,%r13),0(%r14)
|
|
3: TSTMSK __LC_MCCK_CODE(%r13),MCCK_CODE_PSW_MWP_VALID
|
|
jno .Lmcck_panic
|
|
tmhh %r8,0x0001 # interrupting from user ?
|
|
jnz .Lmcck_user
|
|
TSTMSK __LC_MCCK_CODE(%r13),MCCK_CODE_PSW_IA_VALID
|
|
jno .Lmcck_panic
|
|
#if IS_ENABLED(CONFIG_KVM)
|
|
lg %r10,__LC_CURRENT(%r13)
|
|
tm __TI_sie(%r10),0xff
|
|
jz .Lmcck_user
|
|
# Need to compare the address instead of __TI_SIE flag.
|
|
# Otherwise there would be a race between setting the flag
|
|
# and entering SIE (or leaving and clearing the flag). This
|
|
# would cause machine checks targeted at the guest to be
|
|
# handled by the host.
|
|
larl %r14,.Lsie_entry
|
|
clgrjl %r9,%r14, 4f
|
|
larl %r14,.Lsie_leave
|
|
clgrjhe %r9,%r14, 4f
|
|
lg %r10,__LC_PCPU
|
|
oi __PCPU_FLAGS+7(%r10), _CIF_MCCK_GUEST
|
|
4: BPENTER __SF_SIE_FLAGS(%r15),_TIF_ISOLATE_BP_GUEST
|
|
SIEEXIT __SF_SIE_CONTROL(%r15),%r13
|
|
#endif
|
|
.Lmcck_user:
|
|
lg %r15,__LC_MCCK_STACK(%r13)
|
|
la %r11,STACK_FRAME_OVERHEAD(%r15)
|
|
stctg %c1,%c1,__PT_CR1(%r11)
|
|
lctlg %c1,%c1,__LC_KERNEL_ASCE(%r13)
|
|
xc __SF_BACKCHAIN(8,%r15),__SF_BACKCHAIN(%r15)
|
|
lay %r14,__LC_GPREGS_SAVE_AREA(%r13)
|
|
mvc __PT_R0(128,%r11),0(%r14)
|
|
# clear user controlled registers to prevent speculative use
|
|
xgr %r0,%r0
|
|
xgr %r1,%r1
|
|
xgr %r3,%r3
|
|
xgr %r4,%r4
|
|
xgr %r5,%r5
|
|
xgr %r6,%r6
|
|
xgr %r7,%r7
|
|
xgr %r10,%r10
|
|
stmg %r8,%r9,__PT_PSW(%r11)
|
|
xc __PT_FLAGS(8,%r11),__PT_FLAGS(%r11)
|
|
xc __SF_BACKCHAIN(8,%r15),__SF_BACKCHAIN(%r15)
|
|
lgr %r2,%r11 # pass pointer to pt_regs
|
|
brasl %r14,s390_do_machine_check
|
|
lctlg %c1,%c1,__PT_CR1(%r11)
|
|
lmg %r0,%r10,__PT_R0(%r11)
|
|
mvc __LC_RETURN_MCCK_PSW(16,%r13),__PT_PSW(%r11) # move return PSW
|
|
tm __LC_RETURN_MCCK_PSW+1(%r13),0x01 # returning to user ?
|
|
jno 0f
|
|
BPON
|
|
stpt __LC_EXIT_TIMER(%r13)
|
|
0: ALTERNATIVE "brcl 0,0", __stringify(lay %r12,__LC_LAST_BREAK_SAVE_AREA(%r13)),\
|
|
ALT_FACILITY(193)
|
|
LBEAR 0(%r12)
|
|
lmg %r11,%r15,__PT_R11(%r11)
|
|
LPSWEY __LC_RETURN_MCCK_PSW,__LC_RETURN_MCCK_LPSWE
|
|
|
|
.Lmcck_panic:
|
|
/*
|
|
* Iterate over all possible CPU addresses in the range 0..0xffff
|
|
* and stop each CPU using signal processor. Use compare and swap
|
|
* to allow just one CPU-stopper and prevent concurrent CPUs from
|
|
* stopping each other while leaving the others running.
|
|
*/
|
|
lhi %r5,0
|
|
lhi %r6,1
|
|
larl %r7,stop_lock
|
|
cs %r5,%r6,0(%r7) # single CPU-stopper only
|
|
jnz 4f
|
|
larl %r7,this_cpu
|
|
stap 0(%r7) # this CPU address
|
|
lh %r4,0(%r7)
|
|
nilh %r4,0
|
|
lhi %r0,1
|
|
sll %r0,16 # CPU counter
|
|
lhi %r3,0 # next CPU address
|
|
0: cr %r3,%r4
|
|
je 2f
|
|
1: sigp %r1,%r3,SIGP_STOP # stop next CPU
|
|
brc SIGP_CC_BUSY,1b
|
|
2: ahi %r3,1
|
|
brct %r0,0b
|
|
3: sigp %r1,%r4,SIGP_STOP # stop this CPU
|
|
brc SIGP_CC_BUSY,3b
|
|
4: j 4b
|
|
SYM_CODE_END(mcck_int_handler)
|
|
|
|
SYM_CODE_START(restart_int_handler)
|
|
ALTERNATIVE "nop", "lpp _LPP_OFFSET", ALT_FACILITY(40)
|
|
stg %r15,__LC_SAVE_AREA_RESTART
|
|
TSTMSK __LC_RESTART_FLAGS,RESTART_FLAG_CTLREGS,4
|
|
jz 0f
|
|
lctlg %c0,%c15,__LC_CREGS_SAVE_AREA
|
|
0: larl %r15,daton_psw
|
|
lpswe 0(%r15) # turn dat on, keep irqs off
|
|
.Ldaton:
|
|
GET_LC %r15
|
|
lg %r15,__LC_RESTART_STACK(%r15)
|
|
xc STACK_FRAME_OVERHEAD(__PT_SIZE,%r15),STACK_FRAME_OVERHEAD(%r15)
|
|
stmg %r0,%r14,STACK_FRAME_OVERHEAD+__PT_R0(%r15)
|
|
GET_LC %r13
|
|
mvc STACK_FRAME_OVERHEAD+__PT_R15(8,%r15),__LC_SAVE_AREA_RESTART(%r13)
|
|
mvc STACK_FRAME_OVERHEAD+__PT_PSW(16,%r15),__LC_RST_OLD_PSW(%r13)
|
|
xc 0(STACK_FRAME_OVERHEAD,%r15),0(%r15)
|
|
lg %r1,__LC_RESTART_FN(%r13) # load fn, parm & source cpu
|
|
lg %r2,__LC_RESTART_DATA(%r13)
|
|
lgf %r3,__LC_RESTART_SOURCE(%r13)
|
|
ltgr %r3,%r3 # test source cpu address
|
|
jm 1f # negative -> skip source stop
|
|
0: sigp %r4,%r3,SIGP_SENSE # sigp sense to source cpu
|
|
brc 10,0b # wait for status stored
|
|
1: basr %r14,%r1 # call function
|
|
stap __SF_EMPTY(%r15) # store cpu address
|
|
llgh %r3,__SF_EMPTY(%r15)
|
|
2: sigp %r4,%r3,SIGP_STOP # sigp stop to current cpu
|
|
brc 2,2b
|
|
3: j 3b
|
|
SYM_CODE_END(restart_int_handler)
|
|
|
|
__INIT
|
|
SYM_CODE_START(early_pgm_check_handler)
|
|
STMG_LC %r8,%r15,__LC_SAVE_AREA
|
|
GET_LC %r13
|
|
aghi %r15,-(STACK_FRAME_OVERHEAD+__PT_SIZE)
|
|
la %r11,STACK_FRAME_OVERHEAD(%r15)
|
|
xc __SF_BACKCHAIN(8,%r15),__SF_BACKCHAIN(%r15)
|
|
stmg %r0,%r7,__PT_R0(%r11)
|
|
mvc __PT_PSW(16,%r11),__LC_PGM_OLD_PSW(%r13)
|
|
mvc __PT_R8(64,%r11),__LC_SAVE_AREA(%r13)
|
|
lgr %r2,%r11
|
|
brasl %r14,__do_early_pgm_check
|
|
mvc __LC_RETURN_PSW(16,%r13),STACK_FRAME_OVERHEAD+__PT_PSW(%r15)
|
|
lmg %r0,%r15,STACK_FRAME_OVERHEAD+__PT_R0(%r15)
|
|
LPSWEY __LC_RETURN_PSW,__LC_RETURN_LPSWE
|
|
SYM_CODE_END(early_pgm_check_handler)
|
|
__FINIT
|
|
|
|
.section .kprobes.text, "ax"
|
|
|
|
#if defined(CONFIG_CHECK_STACK) || defined(CONFIG_VMAP_STACK)
|
|
/*
|
|
* The synchronous or the asynchronous stack overflowed. We are dead.
|
|
* No need to properly save the registers, we are going to panic anyway.
|
|
* Setup a pt_regs so that show_trace can provide a good call trace.
|
|
*/
|
|
SYM_CODE_START(stack_overflow)
|
|
GET_LC %r15
|
|
lg %r15,__LC_NODAT_STACK(%r15) # change to panic stack
|
|
la %r11,STACK_FRAME_OVERHEAD(%r15)
|
|
stmg %r0,%r7,__PT_R0(%r11)
|
|
stmg %r8,%r9,__PT_PSW(%r11)
|
|
mvc __PT_R8(64,%r11),0(%r14)
|
|
stg %r10,__PT_ORIG_GPR2(%r11) # store last break to orig_gpr2
|
|
xc __SF_BACKCHAIN(8,%r15),__SF_BACKCHAIN(%r15)
|
|
lgr %r2,%r11 # pass pointer to pt_regs
|
|
jg kernel_stack_overflow
|
|
SYM_CODE_END(stack_overflow)
|
|
#endif
|
|
|
|
.section .data, "aw"
|
|
.balign 4
|
|
SYM_DATA_LOCAL(stop_lock, .long 0)
|
|
SYM_DATA_LOCAL(this_cpu, .short 0)
|
|
.balign 8
|
|
SYM_DATA_START_LOCAL(daton_psw)
|
|
.quad PSW_KERNEL_BITS
|
|
.quad .Ldaton
|
|
SYM_DATA_END(daton_psw)
|
|
|
|
.section .rodata, "a"
|
|
.balign 8
|
|
#define SYSCALL(esame,emu) .quad __s390x_ ## esame
|
|
SYM_DATA_START(sys_call_table)
|
|
#include "asm/syscall_table.h"
|
|
SYM_DATA_END(sys_call_table)
|
|
#undef SYSCALL
|
|
|
|
#ifdef CONFIG_COMPAT
|
|
|
|
#define SYSCALL(esame,emu) .quad __s390_ ## emu
|
|
SYM_DATA_START(sys_call_table_emu)
|
|
#include "asm/syscall_table.h"
|
|
SYM_DATA_END(sys_call_table_emu)
|
|
#undef SYSCALL
|
|
#endif
|