mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-29 22:14:41 +08:00
e888a32c71
This patch adds the pin configuration for SDIO controller on stm32f4. Signed-off-by: Andrea Merello <andrea.merello@gmail.com> Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
375 lines
12 KiB
Plaintext
375 lines
12 KiB
Plaintext
/*
|
|
* Copyright 2017 - Alexandre Torgue <alexandre.torgue@st.com>
|
|
*
|
|
* This file is dual-licensed: you can use it either under the terms
|
|
* of the GPL or the X11 license, at your option. Note that this dual
|
|
* licensing only applies to this file, and not this project as a
|
|
* whole.
|
|
*
|
|
* a) This file is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of the
|
|
* License, or (at your option) any later version.
|
|
*
|
|
* This file is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* Or, alternatively,
|
|
*
|
|
* b) Permission is hereby granted, free of charge, to any person
|
|
* obtaining a copy of this software and associated documentation
|
|
* files (the "Software"), to deal in the Software without
|
|
* restriction, including without limitation the rights to use,
|
|
* copy, modify, merge, publish, distribute, sublicense, and/or
|
|
* sell copies of the Software, and to permit persons to whom the
|
|
* Software is furnished to do so, subject to the following
|
|
* conditions:
|
|
*
|
|
* The above copyright notice and this permission notice shall be
|
|
* included in all copies or substantial portions of the Software.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
|
|
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
|
|
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
|
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
|
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
|
|
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
|
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
|
* OTHER DEALINGS IN THE SOFTWARE.
|
|
*/
|
|
|
|
#include <dt-bindings/pinctrl/stm32-pinfunc.h>
|
|
#include <dt-bindings/mfd/stm32f4-rcc.h>
|
|
|
|
/ {
|
|
soc {
|
|
pinctrl: pin-controller {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0 0x40020000 0x3000>;
|
|
interrupt-parent = <&exti>;
|
|
st,syscfg = <&syscfg 0x8>;
|
|
pins-are-numbered;
|
|
|
|
gpioa: gpio@40020000 {
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
reg = <0x0 0x400>;
|
|
clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOA)>;
|
|
st,bank-name = "GPIOA";
|
|
};
|
|
|
|
gpiob: gpio@40020400 {
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
reg = <0x400 0x400>;
|
|
clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOB)>;
|
|
st,bank-name = "GPIOB";
|
|
};
|
|
|
|
gpioc: gpio@40020800 {
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
reg = <0x800 0x400>;
|
|
clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOC)>;
|
|
st,bank-name = "GPIOC";
|
|
};
|
|
|
|
gpiod: gpio@40020c00 {
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
reg = <0xc00 0x400>;
|
|
clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOD)>;
|
|
st,bank-name = "GPIOD";
|
|
};
|
|
|
|
gpioe: gpio@40021000 {
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
reg = <0x1000 0x400>;
|
|
clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOE)>;
|
|
st,bank-name = "GPIOE";
|
|
};
|
|
|
|
gpiof: gpio@40021400 {
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
reg = <0x1400 0x400>;
|
|
clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOF)>;
|
|
st,bank-name = "GPIOF";
|
|
};
|
|
|
|
gpiog: gpio@40021800 {
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
reg = <0x1800 0x400>;
|
|
clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOG)>;
|
|
st,bank-name = "GPIOG";
|
|
};
|
|
|
|
gpioh: gpio@40021c00 {
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
reg = <0x1c00 0x400>;
|
|
clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOH)>;
|
|
st,bank-name = "GPIOH";
|
|
};
|
|
|
|
gpioi: gpio@40022000 {
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
reg = <0x2000 0x400>;
|
|
clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOI)>;
|
|
st,bank-name = "GPIOI";
|
|
};
|
|
|
|
gpioj: gpio@40022400 {
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
reg = <0x2400 0x400>;
|
|
clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOJ)>;
|
|
st,bank-name = "GPIOJ";
|
|
};
|
|
|
|
gpiok: gpio@40022800 {
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
reg = <0x2800 0x400>;
|
|
clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOK)>;
|
|
st,bank-name = "GPIOK";
|
|
};
|
|
|
|
usart1_pins_a: usart1@0 {
|
|
pins1 {
|
|
pinmux = <STM32_PINMUX('A', 9, AF7)>; /* USART1_TX */
|
|
bias-disable;
|
|
drive-push-pull;
|
|
slew-rate = <0>;
|
|
};
|
|
pins2 {
|
|
pinmux = <STM32_PINMUX('A', 10, AF7)>; /* USART1_RX */
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
usart3_pins_a: usart3@0 {
|
|
pins1 {
|
|
pinmux = <STM32_PINMUX('B', 10, AF7)>; /* USART3_TX */
|
|
bias-disable;
|
|
drive-push-pull;
|
|
slew-rate = <0>;
|
|
};
|
|
pins2 {
|
|
pinmux = <STM32_PINMUX('B', 11, AF7)>; /* USART3_RX */
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
usbotg_fs_pins_a: usbotg_fs@0 {
|
|
pins {
|
|
pinmux = <STM32_PINMUX('A', 10, AF10)>, /* OTG_FS_ID */
|
|
<STM32_PINMUX('A', 11, AF10)>, /* OTG_FS_DM */
|
|
<STM32_PINMUX('A', 12, AF10)>; /* OTG_FS_DP */
|
|
bias-disable;
|
|
drive-push-pull;
|
|
slew-rate = <2>;
|
|
};
|
|
};
|
|
|
|
usbotg_fs_pins_b: usbotg_fs@1 {
|
|
pins {
|
|
pinmux = <STM32_PINMUX('B', 12, AF12)>, /* OTG_HS_ID */
|
|
<STM32_PINMUX('B', 14, AF12)>, /* OTG_HS_DM */
|
|
<STM32_PINMUX('B', 15, AF12)>; /* OTG_HS_DP */
|
|
bias-disable;
|
|
drive-push-pull;
|
|
slew-rate = <2>;
|
|
};
|
|
};
|
|
|
|
usbotg_hs_pins_a: usbotg_hs@0 {
|
|
pins {
|
|
pinmux = <STM32_PINMUX('H', 4, AF10)>, /* OTG_HS_ULPI_NXT*/
|
|
<STM32_PINMUX('I', 11, AF10)>, /* OTG_HS_ULPI_DIR */
|
|
<STM32_PINMUX('C', 0, AF10)>, /* OTG_HS_ULPI_STP */
|
|
<STM32_PINMUX('A', 5, AF10)>, /* OTG_HS_ULPI_CK */
|
|
<STM32_PINMUX('A', 3, AF10)>, /* OTG_HS_ULPI_D0 */
|
|
<STM32_PINMUX('B', 0, AF10)>, /* OTG_HS_ULPI_D1 */
|
|
<STM32_PINMUX('B', 1, AF10)>, /* OTG_HS_ULPI_D2 */
|
|
<STM32_PINMUX('B', 10, AF10)>, /* OTG_HS_ULPI_D3 */
|
|
<STM32_PINMUX('B', 11, AF10)>, /* OTG_HS_ULPI_D4 */
|
|
<STM32_PINMUX('B', 12, AF10)>, /* OTG_HS_ULPI_D5 */
|
|
<STM32_PINMUX('B', 13, AF10)>, /* OTG_HS_ULPI_D6 */
|
|
<STM32_PINMUX('B', 5, AF10)>; /* OTG_HS_ULPI_D7 */
|
|
bias-disable;
|
|
drive-push-pull;
|
|
slew-rate = <2>;
|
|
};
|
|
};
|
|
|
|
ethernet_mii: mii@0 {
|
|
pins {
|
|
pinmux = <STM32_PINMUX('G', 13, AF11)>, /* ETH_MII_TXD0_ETH_RMII_TXD0 */
|
|
<STM32_PINMUX('G', 14, AF11)>, /* ETH_MII_TXD1_ETH_RMII_TXD1 */
|
|
<STM32_PINMUX('C', 2, AF11)>, /* ETH_MII_TXD2 */
|
|
<STM32_PINMUX('B', 8, AF11)>, /* ETH_MII_TXD3 */
|
|
<STM32_PINMUX('C', 3, AF11)>, /* ETH_MII_TX_CLK */
|
|
<STM32_PINMUX('G', 11,AF11)>, /* ETH_MII_TX_EN_ETH_RMII_TX_EN */
|
|
<STM32_PINMUX('A', 2, AF11)>, /* ETH_MDIO */
|
|
<STM32_PINMUX('C', 1, AF11)>, /* ETH_MDC */
|
|
<STM32_PINMUX('A', 1, AF11)>, /* ETH_MII_RX_CLK_ETH_RMII_REF_CLK */
|
|
<STM32_PINMUX('A', 7, AF11)>, /* ETH_MII_RX_DV_ETH_RMII_CRS_DV */
|
|
<STM32_PINMUX('C', 4, AF11)>, /* ETH_MII_RXD0_ETH_RMII_RXD0 */
|
|
<STM32_PINMUX('C', 5, AF11)>, /* ETH_MII_RXD1_ETH_RMII_RXD1 */
|
|
<STM32_PINMUX('H', 6, AF11)>, /* ETH_MII_RXD2 */
|
|
<STM32_PINMUX('H', 7, AF11)>; /* ETH_MII_RXD3 */
|
|
slew-rate = <2>;
|
|
};
|
|
};
|
|
|
|
adc3_in8_pin: adc@200 {
|
|
pins {
|
|
pinmux = <STM32_PINMUX('F', 10, ANALOG)>;
|
|
};
|
|
};
|
|
|
|
pwm1_pins: pwm@1 {
|
|
pins {
|
|
pinmux = <STM32_PINMUX('A', 8, AF1)>, /* TIM1_CH1 */
|
|
<STM32_PINMUX('B', 13, AF1)>, /* TIM1_CH1N */
|
|
<STM32_PINMUX('B', 12, AF1)>; /* TIM1_BKIN */
|
|
};
|
|
};
|
|
|
|
pwm3_pins: pwm@3 {
|
|
pins {
|
|
pinmux = <STM32_PINMUX('B', 4, AF2)>, /* TIM3_CH1 */
|
|
<STM32_PINMUX('B', 5, AF2)>; /* TIM3_CH2 */
|
|
};
|
|
};
|
|
|
|
i2c1_pins: i2c1@0 {
|
|
pins {
|
|
pinmux = <STM32_PINMUX('B', 9, AF4)>, /* I2C1_SDA */
|
|
<STM32_PINMUX('B', 6, AF4)>; /* I2C1_SCL */
|
|
bias-disable;
|
|
drive-open-drain;
|
|
slew-rate = <3>;
|
|
};
|
|
};
|
|
|
|
ltdc_pins: ltdc@0 {
|
|
pins {
|
|
pinmux = <STM32_PINMUX('I', 12, AF14)>, /* LCD_HSYNC */
|
|
<STM32_PINMUX('I', 13, AF14)>, /* LCD_VSYNC */
|
|
<STM32_PINMUX('I', 14, AF14)>, /* LCD_CLK */
|
|
<STM32_PINMUX('I', 15, AF14)>, /* LCD_R0 */
|
|
<STM32_PINMUX('J', 0, AF14)>, /* LCD_R1 */
|
|
<STM32_PINMUX('J', 1, AF14)>, /* LCD_R2 */
|
|
<STM32_PINMUX('J', 2, AF14)>, /* LCD_R3 */
|
|
<STM32_PINMUX('J', 3, AF14)>, /* LCD_R4 */
|
|
<STM32_PINMUX('J', 4, AF14)>, /* LCD_R5 */
|
|
<STM32_PINMUX('J', 5, AF14)>, /* LCD_R6*/
|
|
<STM32_PINMUX('J', 6, AF14)>, /* LCD_R7 */
|
|
<STM32_PINMUX('J', 7, AF14)>, /* LCD_G0 */
|
|
<STM32_PINMUX('J', 8, AF14)>, /* LCD_G1 */
|
|
<STM32_PINMUX('J', 9, AF14)>, /* LCD_G2 */
|
|
<STM32_PINMUX('J', 10, AF14)>, /* LCD_G3 */
|
|
<STM32_PINMUX('J', 11, AF14)>, /* LCD_G4 */
|
|
<STM32_PINMUX('J', 12, AF14)>, /* LCD_B0 */
|
|
<STM32_PINMUX('J', 13, AF14)>, /* LCD_B1 */
|
|
<STM32_PINMUX('J', 14, AF14)>, /* LCD_B2 */
|
|
<STM32_PINMUX('J', 15, AF14)>, /* LCD_B3*/
|
|
<STM32_PINMUX('K', 0, AF14)>, /* LCD_G5 */
|
|
<STM32_PINMUX('K', 1, AF14)>, /* LCD_G6 */
|
|
<STM32_PINMUX('K', 2, AF14)>, /* LCD_G7 */
|
|
<STM32_PINMUX('K', 3, AF14)>, /* LCD_B4 */
|
|
<STM32_PINMUX('K', 4, AF14)>, /* LCD_B5 */
|
|
<STM32_PINMUX('K', 5, AF14)>, /* LCD_B6 */
|
|
<STM32_PINMUX('K', 6, AF14)>, /* LCD_B7 */
|
|
<STM32_PINMUX('K', 7, AF14)>; /* LCD_DE */
|
|
slew-rate = <2>;
|
|
};
|
|
};
|
|
|
|
dcmi_pins: dcmi@0 {
|
|
pins {
|
|
pinmux = <STM32_PINMUX('A', 4, AF13)>, /* DCMI_HSYNC */
|
|
<STM32_PINMUX('B', 7, AF13)>, /* DCMI_VSYNC */
|
|
<STM32_PINMUX('A', 6, AF13)>, /* DCMI_PIXCLK */
|
|
<STM32_PINMUX('C', 6, AF13)>, /* DCMI_D0 */
|
|
<STM32_PINMUX('C', 7, AF13)>, /* DCMI_D1 */
|
|
<STM32_PINMUX('C', 8, AF13)>, /* DCMI_D2 */
|
|
<STM32_PINMUX('C', 9, AF13)>, /* DCMI_D3 */
|
|
<STM32_PINMUX('C', 11, AF13)>, /*DCMI_D4 */
|
|
<STM32_PINMUX('D', 3, AF13)>, /* DCMI_D5 */
|
|
<STM32_PINMUX('B', 8, AF13)>, /* DCMI_D6 */
|
|
<STM32_PINMUX('E', 6, AF13)>, /* DCMI_D7 */
|
|
<STM32_PINMUX('C', 10, AF13)>, /* DCMI_D8 */
|
|
<STM32_PINMUX('C', 12, AF13)>, /* DCMI_D9 */
|
|
<STM32_PINMUX('D', 6, AF13)>, /* DCMI_D10 */
|
|
<STM32_PINMUX('D', 2, AF13)>; /* DCMI_D11 */
|
|
bias-disable;
|
|
drive-push-pull;
|
|
slew-rate = <3>;
|
|
};
|
|
};
|
|
|
|
sdio_pins: sdio_pins@0 {
|
|
pins {
|
|
pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDIO_D0 */
|
|
<STM32_PINMUX('C', 9, AF12)>, /* SDIO_D1 */
|
|
<STM32_PINMUX('C', 10, AF12)>, /* SDIO_D2 */
|
|
<STM32_PINMUX('C', 11, AF12)>, /* SDIO_D3 */
|
|
<STM32_PINMUX('C', 12, AF12)>, /* SDIO_CK */
|
|
<STM32_PINMUX('D', 2, AF12)>; /* SDIO_CMD */
|
|
drive-push-pull;
|
|
slew-rate = <2>;
|
|
};
|
|
};
|
|
|
|
sdio_pins_od: sdio_pins_od@0 {
|
|
pins1 {
|
|
pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDIO_D0 */
|
|
<STM32_PINMUX('C', 9, AF12)>, /* SDIO_D1 */
|
|
<STM32_PINMUX('C', 10, AF12)>, /* SDIO_D2 */
|
|
<STM32_PINMUX('C', 11, AF12)>, /* SDIO_D3 */
|
|
<STM32_PINMUX('C', 12, AF12)>; /* SDIO_CK */
|
|
drive-push-pull;
|
|
slew-rate = <2>;
|
|
};
|
|
|
|
pins2 {
|
|
pinmux = <STM32_PINMUX('D', 2, AF12)>; /* SDIO_CMD */
|
|
drive-open-drain;
|
|
slew-rate = <2>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|